1-0 FA4427-11-R-0103 ASBESTOS LEAD BASED PAINT SOL.pdf

ASBESTOS/LEAD PAINT ABATEMENT

All correspondence shall be emailed to Msgt Michael C. Brow n (michael.brow n.49@us.af.mil) w ith copy to Vallarie V. Kilkenny (vallarie.kilkenny@us.af.mil). Do not send original unless requested.

This acquisition is a Firm Fixed Price Service Disabled Veteran Ow ned Small Business Competitive Set-Aside.

Instructions for preparation and submission of the proposal are contained in Section L. Basis of aw ard is located in Section M.

Pre-Proposal Conference/Site visit is scheduled for 14 Dec 11 at 1000 hours. Complete information is contained in section L.

Magnitude of construction is betw een $1,000,000 and $5,000,000.

Point of Contact: MSgt Michael C.Brow n at 707-424-2014 (Contract Specialist) or Vallarie V. Kilkenny at 707-424-7769 (Contracting Officer).

Facsimile number 707-424-5189.

MICHAEL C. BROWN 707-424-2014

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

10. THE GOVERNMENT REQUIRES PERFORMANCE OF THE WORK DESCRIBED IN THESE DOCUMENTS

NEGOTIATED

02-Dec-2011

(RFP)

(IFB)

X

CALL:

B. TELEPHONE NO. (Include area code) (NO COLLECT CALLS)

2. TYPE OF SOLICITATION

SEALED BID

3. DATE ISSUED

9. FOR INFORMATION A. NAME

SOLICITATION

NSN 7540-01-155-3212 1442-101 STANDARD FORM 1442 (REV. 4-85)

Prescribed by GSA

FAR (48 CFR) 53.236-1(e)

11. The Contractor shall begin performance w ithin _______10 calendar days and complete it w ithin ________365 calendar days after receiving aw ard, X notice to proceed. This performance period is X mandatory, negotiable. (See _________________________FAR 52.211-10

12 A. THE CONTRACTOR MUST FURNISH ANY REQUIRED PERFORMANCE AND PAYMENT BONDS?

(If "YES," indicate within how many calendar days after award in Item 12B.)

X YES NO

13. ADDITIONAL SOLICITATION REQUIREMENTS:

A. Sealed offers in original and __________1 copies to perform the w ork required are due at the place specified in Item 8 by ___________ local time ______________04 Jan 2012 (date). If this is a sealed bid solicitation, offers must be publicly opened at that time.

shall be marked to show the offeror's name and address, the solicitation number, and the date and time offers are due.

B. An offer guarantee X is, is not required.

C. All offers are subject to the (1) w ork requirements, and (2) other provisions and clauses incorporated in the solicitation in full text or by reference.

D. Offers providing less than _______180 calendar days for Government acceptance after the date offers are due w ill not be considered and w ill be rejected.

SOLICITATION, OFFER,

AND AWARD

(Construction, Alteration, or Repair)

1. SOLICITATION NO.

IMPORTANT - The "offer" section on the reverse must be fully completed by offeror.

4. CONTRACT NO.

7. ISSUED BY CODE

60 CONS/LGCA

350 HANGAR AVE

ATTN: MSGT MICHAEL C. BROWN

TRAVIS AFB CA 94535

FA4427

PAGE OF PAGES

1 OF

CODE FA4427

(Title, identifying no., date):

12B. CALENDAR DAYS

10:00 AM (hour)

Sealed envelopes containing offers

60 CONS/LGCA

350 HANGAR AVE

ATTN: SSGT BARRON

TRAVIS AFB CA 94535

5. REQUISITION/PURCHASE REQUEST NO. 6. PROJECT NO.

8. ADDRESS OFFER TO (If Other Than Item 7)

707-424-2712FAX:TEL: 707-424-2014 TEL: 707-424-2014 FAX:

FA4427-11-R-0103 73

20B. SIGNATURE

(REV. 4-85)STANDARD FORM 1442 BACK

TO SIGN

NSN 7540-01-155-3212

SOLICITATION, OFFER, AND AWARD (Continued) (Construction, Alteration, or Repair)

CODE FACILITY CODE

17. The offeror agrees to perform the w ork required at the prices specif ied below in strict accordance w ith the terms of this solicitation, if this offer is accepted by the Government in w riting w ithin ________ calendar days after the date offers are due.

the minimum requirements stated in Item 13D. Failure to insert any number means the offeror accepts the minimum in Item 13D.)

AMOUNTS SEE SCHEDULE OF PRICES

18. The offeror agrees to furnish any required performance and payment bonds.

19. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments to the solicitation -- give number and date of each)

AMENDMENT NO.

DATE

20A. NAME AND TITLE OF PERSON AUTHORIZED TO SIGN

OFFER (Type or print)

AWARD (To be completed by Government)

21. ITEMS ACCEPTED:

22. AMOUNT 23. ACCOUNTING AND APPROPRIATION DATA

24. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

(4 copies unless otherwise specified)

CODE

(Insert any number equal to or greater than

20C. OFFER DATE

25. OTHER THAN FULL AND OPEN COMPETITION PURSUANT TO

10 U.S.C. 2304(c) 41 U.S.C. 253(c)

CODE27. PAYMENT WILL BE MADE BY:26. ADMINISTERED BY

(Include ZIP Code)14. NAME AND ADDRESS OF OFFEROR 15. TELEPHONE NO. (Include area code)

See Item 14

(Include only if different than Item 14)16. REMITTANCE ADDRESS

30B. SIGNATURE

29. AWARD (Contractor is not required to sign this document.)

document and return _______ copies to issuing office.) Contractor agrees Your of f er on this solicitation, is hereby accepted as to the items listed. This award con-to f urnish and deliv er all items or perf orm all work, requisitions identif ied summates the contract, which consists of (a) the Gov ernment solicitation and on this f orm and any continuation sheets f or the consideration stated in this y our of f er, and (b) this contract award. No f urther contractual document is contract. The rights and obligations of the parties to this contract shall be necessary .

gov erned by (a) this contract award, (b) the solicitation, and (c) the clauses, representations, certif ications, and specif ications or incorporated by ref er-ence in or attached to this contract.

30A. NAME AND TITLE OF CONTRACTOR OR PERSON AUTHORIZED 31A. NAME OF CONTRACTING OFFICER (Type or print)

30C. DATE

(Type or print)

TEL: EMAIL:

31B. UNITED STATES OF AMERICA 31C. AWARD DATE

BY

CONTRACTING OFFICER WILL COMPLETE ITEM 28 OR 29 AS APPLICABLE

(Contractor is required to sign this28. NEGOTIATED AGREEMENT

(M ust be fully completed by offeror)OFFER

FA4427-11-R-0103

Section B - Supplies or Services and Prices

ITEM NO SUPPLIES/SERVICES ESTIMATED

QUANTITY

UNIT UNIT PRICE ESTIMATED AMOUNT

0001 99 Lump Sum

IDC-Requirements-Asbestos/Lead Paint

FFP

BASIC PERIOD 15 JAN 12 or DATE OF AWARD through 31 MAY 2012 Delivery/Task Orders will be placed utilizing Price Book Items 0001 Through 0071 to identify work required. Please submit all pricing data IAW Price Book - Basic Period. Contractor will provide all materials, labor, transportation, and equipment. Projects shall include but shall not be limited to the following:

removal, maintenance and repair of Class I and II asbestos-containing materials (ACM), repair and maintenance of structures, substrates, or portions thereof, that contain Class I and II ACM and presumed asbestos containing materials (PACM) and lead based paint at Travis AFB, California. It also covers requirements for storage, transportation, disposal and housekeeping activities on the site or location at which these activities are performed. All work shall be performed IAW the Specifications and Detailed Sheet Guidelines (Atch #1, dated 22 DEC 2010);

applicable to a project.

FOB: Destination

NSN: Z199-AS-BES-LEAD

SIGNAL CODE: A

ESTIMATED

NET AMT

UNIT UNIT PRICE ESTIMATED AMOUNT

1001 99 Lump

OPTION IDC-Requirements-Asbestos/Lead Paint

OPTION PERIOD (1) - 1 JUN 2012 THROUGH 31 MAY 2013. Delivery/Task Orders will be placed utilizing Price Book Items 1001 Through 1071 to identify work required. Please submit all pricing data IAW Price Book - Option Period(1).

Contractor will provide all materials, labor, transportation, and equipment. Projects shall include but shall not be limited to the following: removal, maintenance and repair of Class I and II asbestos-containing materials (ACM), repair and maintenance of structures, substrates, or portions thereof, that contain Class I and II ACM and presumed asbestos containing materials (PACM) and lead based paint at Travis AFB, California. It also covers requirements for storage, transportation, disposal and housekeeping activities on the site or location at which these activities are performed. All work shall be performed IAW the Specifications and Detailed Sheet Guidelines (Atch #1, dated 22 DEC 2010); applicable to a project.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

2001 99 Lump

OPTION PERIOD (2) - 1 JUN 2013 THROUGH 31 MAY 2014. Delivery/Task Orders will be placed utilizing Price Book Items 2001 Through 2071 to identify work required. Please submit all pricing data IAW Price Book - Option Period(2).

Contractor will provide all materials, labor, transportation, and equipment. Projects shall include but shall not be limited to the following: removal, maintenance and repair of Class I and II asbestos-containing materials (ACM), repair and maintenance of structures, substrates, or portions thereof, that contain Class I and II ACM and presumed asbestos containing materials (PACM) and lead based paint at Travis AFB, California. It also covers requirements for storage, transportation, disposal and housekeeping activities on the site or location at which these activities are performed. All work shall be performed IAW the Specifications and Detailed Sheet Guidelines (Atch #1, dated 22 DEC 2010); applicable to a project.

FOB: Destination

UNIT UNIT PRICE ESTIMATED AMOUNT

3001 99 Lump

OPTION PERIOD (3) - 1 JUN 2014 THROUGH 31 MAY 2015. Delivery/Task Orders will be placed utilizing Price Book Items 3001 Through 3071 to identify work required. Please submit all pricing data IAW Price Book - Option Period(3).

Contractor will provide all materials, labor, transportation, and equipment. Projects shall include but shall not be limited to the following: removal, maintenance and repair of Class I and II asbestos-containing materials (ACM), repair and maintenance of structures, substrates, or portions thereof, that contain Class I and II ACM and presumed asbestos containing materials (PACM) and lead based paint at Travis AFB, California. It also covers requirements for storage, transportation, disposal and housekeeping activities on the site or location at which these activities are performed. All work shall be performed IAW the Specifications and Detailed Sheet Guidelines (Atch #1, dated 22 DEC 2010); applicable to a project.

FOB: Destination

SUMMARY OF CLINS

SUMMARY OF TOTALS FOR CLINS

DESCRIPTION AMOUNT

TOTAL BASIC PERIOD CLIN 0001 (PRICE BOOK ITEMS 0001-0071)

TOTAL OPTION PERIOD 1 CLIN 1001 (PRICE BOOK ITEMS 1001-1071)

TOTAL OPTION PERIOD 2 CLIN 2001 (PRICE BOOK ITEMS 2001-2071)

TOTAL OPTION PERIOD 3 CLIN 3001 (PRICE BOOK ITEMS 3001-3071)

GRAND TOTAL CLINS 0001 THRU 3071

PRICE BOOK PAGES FOR EACH CONTRACT LINE ITEM NUMBER (CLIN) FOLLOW.

ENSURE COMPLETION OF ALL PRICE BOOK LINE ITEMS

TRANSFER TOTAL OF ALL PRICE BOOK LINES TO CONTRACT LINE ITEM (CLIN) INFORMATION ON

PREVIOUS PAGES

BASE PERIOD 15 JAN 2012 OR DATE OF AWARD THROUGH 31 MAY 2012 - TO PROVIDE LABOR, TOOLS, MATERIALS, EQUIPMENT, TRANSPORTATION, AND OTHER NECESSARY ITEMS TO PROVIDE ASBESTOS

ABATEMENT IAW SPECIFICATION ATTACHED.

LINE

ITEM

DESCRIPTION EST QTY UNIT UNIT

PRICE

EST AMT

0001 Preparation of Asbestos or Lead Based Paint Hazard Abatement Plan

8 EA

0002 Preparation of Asbestos or Lead Paint Sampling Plan 4 EA

0003 TCLP (Lead) Analysis 8 EA

0004 Removal and Return of General Office Furniture 5 1KSF

0005 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor (per 100 SF for Delivery Orders>100 SF but <= to 1,000 SF) For Areas with LESS than 6 Rooms

12 100 SF

x 1.0

0006 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor (per 100 SF for Delivery Orders>100 SF but <= to 1,000 SF) For Areas with MORE than 6 Rooms x 1.5

0007 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

4 1KSF

0008 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with MORE than 6 Rooms

4 1K SF

0009 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

5 1K SF

0010 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders>10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

0011 Installation of Critical Barrier and Full Containment Area >8 Ft.

but <= to 16 Ft. in Height for Hard Floor Surfaces (per 100 SF for Delivery >100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

15 100 SF

0012 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Hard Floor Surfaces (per 100 SF for Delivery > 100 SF but <= to 1,000 SF) for Areas with MORE than 6 Rooms

LINE

ITEM

DESCRIPTION EST QTY UNIT UNIT

PRICE

EST AMT

0013 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Hard Floor Surfaces (per 1000 SF for Delivery > 1000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

2 1K SF

0014 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= to 16 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= 10,000 SF) Areas with MORE than 6 Rooms

0015 Installation of Critical Barrier and Full Containment Area >8 Ft.

but <= to 16 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery >10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

0016 Installation of Critical Barrier and Full Containment Area up to >8 Ft. but <= to 16 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

0017 Installation of Critical Barrier and Full Containment Area <= 8 Ft. in Height for Vinyl Tile Floors (per 100 SF for Delivery Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

5 100 SF

0018 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

0019 Installation of Critical Barrier and Full Containment Area <= 8 Ft. in Height for Vinyl Tile Floors (per 1,000 SF for Delivery Orders > 1,000 SF but <= 10,000 SF) for Areas with LESS than 6 Rooms

8 1K SF

0020 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with MORE than 6 Rooms

0021 Installation of Critical Barrier and Full Containment Area > 8 Ft but <= 16 Ft. in Height for Vinyl Tile Floors (per 100 SF for Delivery Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

0022 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Vinyl Tile Floors (per 100 SF for Delivery Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

0023 Removal of Lead-Based Paint Windows Metal Frames <200 SF of Window Surface at Opening

375 SF

DESCRIPTION EST QTY UNIT UNIT

PRICE

EST AMT

0024 Removal of Lead-Based Paint Windows Metal Frames >200 SF or<= 2,000 SF of Window Surface at Opening

500 SF

0025 Poly Enclosure of Fixed Equipment and/or Immovable Objects (per SF of Surface Area)

600 SF

0026 Air Monitoring and Testing (PCM) 75 EA

0027 Air Monitoring and Testing (Lead) 20 EA

0028 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter < 3 ")

LF

0029 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 3" or Greater but Less than 8")

200 LF

0030 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 8" or Greater)

200 LF

0031 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter < 3")

15 BAG

0032 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 3" or Greater but Less than 8")

15 BAG

0033 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 8" or Greater)

15 BAG

0034 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter < 3")

150 LF

0035 Asbestos Abatement: Pipe Insulation Fitting Removal by Intact Method (Pipe Diameter 3" or Greater but Less than 8")

150 LF

0036 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter 8" or Greater)

150 LF

0037 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings <= 8 Feet in Height)

250 SF

0038 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings > 8 Feet but <= 16 Feet in Height)

250 SF

0039 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings> 16 but <= 24 Feet in Height)

250 SF

0040 Abatement: Suspended Ceiling Tile per SF « or equal to 8 Feet in Height

500 SF

0041 Abatement: Suspended Ceiling Tile per SF (> 8 Feet but < = to 6 Feet in Height)

500 SF

0042 Abatement: Duct/Flue Insulation per LF (Less than 4 Feet Surface Area)

100 LF

0043 Abatement: Duct/Flue Insulation per LF (> 4 Feet but <= 8 Feet Surface Area)

100 LF

0044 Abatement: Duct/Flue Insulation per LF (> 8 Feet but <= 12 Feet Surface Area)

100 LF

DESCRIPTION EST QTY UNIT UNIT

PRICE

EST AMT

0045 Abatement: Tank/Boiler Insulation per SF 750 SF

0046 Abatement: Cement asbestos Board/Shingle Siding per SF <= 10 Feet in Height

500 SF

0047 Abatement: Cement asbestos Board/Shingle Siding per SF (> 10 Feet but <= 20 Feet in Height)

500 SF

0048 Abatement: Cement asbestos Board/Shingle Siding per SF (> 20 Feet but <= 30 Feet in Height)

500 SF

0049 Abatement: Non-Friable ACM V A T, including Adhesive/Mastic (per SF for Delivery Orders > 100 SF but <=

1,000 SF)

4850 SF

0050 Abatement: Non-Friable ACM VAT, including Adhesive/Mastic (per 1,000 SF (1K) for Delivery Orders> 1,000 SF but <= 10,000 SF)

15 1K SF

0051 LBP Abatement of Flat and Wood Trim Surfaces (per 100 SF for Delivery Orders < 1,000 SF)

5 100 SF

0052 LBP Abatement of Flat and Wood Trim Surfaces (per 1,000 SF for Delivery Orders >= 1,000 SF)

2 1K SF

0053 Abatement: Asbestos Debris per Cubic Yard (CY) 10 CY

0054 Handling/Transportation to Class I Landfill (per Mile) 2500 MI

0055 Handling/Transportation per CY 400 CY

0056 Disposal of Used Mastic Remover per 55 Gallon Drum 10 Drum

0057 Disposal of Lead-Based Paint per 5 to 55 Gallon Drum 5 Drum

0058 Maintenance/Repair: Penetrating Encapsulation 250 SF

0059 Maintenance/Repair: Bridging Encapsulation 250 SF

0060 Clearance Sampling (PCM) 12 Visit

0061 Reinsulation of Pipe per LF (Diameter Less than 3 ") 200 LF

0062 Reinsulation of Pipe per LF (Diameter 3" or Greater but Less than 8")

200 LF

0063 Reinsulation of Pipe per LF (Diameter 8" or Greater) 200 LF

0064 Reinsulation of Tank/Boiler per SF 500 SF

0065 Decontamination Unit (2 Stage) 7 EA

0066 Decontamination Unit (3 Stage) 15 EA

0067 Scaffolding, 1 Rise in Height, per Unit 10 EA

0068 Scaffolding, 2 Rises in Height, per Unit 4 EA

0069 Scaffolding, 3 Rises in Height, per Unit 5 EA

0070 Remove Carpet 15,000 SF

0071 Remove Linoleum (when Floor Tile and Linoleum are present, use this line for both removals)

1500 SF

ESTIMATED TOTAL AMOUNT BASIC PERIOD (CLINS

0001 THRU 0071) (TRANSFER TO CLIN 0001)

OPTION ONE (1) - 01 JUN 2012 THROUGH 31 MAY 2013 - TO PROVIDE LABOR, TOOLS, MATERIALS, EQUIPMENT, TRANSPORTATION, AND OTHER NECESSARY ITEMS TO PROVIDE ASBESTOS ABATEMENT

IAW SPECIFICATION ATTACHED.

LINE

ITEM

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

1001 Preparation of Asbestos or Lead Based Paint Hazard Abatement Plan

8 EA

1002 Preparation of Asbestos or Lead Paint Sampling Plan 4 EA

1003 TCLP (Lead) Analysis 8 EA

1004 Removal and Return of General Office Furniture 5 1KSF

1005 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor (per 100 SF for Delivery Orders>100 SF but <= to 1,000 SF) For Areas with LESS than 6 Rooms

1006 Installation of Critical Barrier and Full Containment Area up to

Orders>100 SF but <= to 1,000 SF) For Areas with MORE than 6 Rooms

1007 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

4 1KSF

1008 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with MORE than 6 Rooms

1009 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

1010 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders>10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

1011 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

1012 Installation of Critical Barrier and Full Containment Area > 8 for Delivery > 100 SF but <= to 1,000 SF) for Areas with MORE than 6 Rooms

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

1013 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Hard Floor Surfaces (per 1000 SF for Delivery > 1000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

1014 Installation of Critical Barrier and Full Containment Area > 8

SF for Delivery Orders > 1,000 SF but <= 10,000 SF) Areas with MORE than 6 Rooms

1015 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

1016 Installation of Critical Barrier and Full Containment Area up to

1,000 SF for Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

1017 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

1018 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

1019 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with LESS than 6 Rooms

1020 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with MORE than 6 Rooms

1021 Installation of Critical Barrier and Full Containment Area > 8 Ft

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

1022 Installation of Critical Barrier and Full Containment Area > 8

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

1023 Removal of Lead-Based Paint Windows Metal Frames <200 SF

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

1024 Removal of Lead-Based Paint Windows Metal Frames >200 SF or<= 2,000 SF of Window Surface at Opening

500 SF

1025 Poly Enclosure of Fixed Equipment and/or Immovable Objects (per SF of Surface Area)

600 SF

1026 Air Monitoring and Testing (PCM) 75 EA

1027 Air Monitoring and Testing (Lead) 20 EA

1028 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter < 3 ")

LF

1029 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 3" or Greater but Less than 8")

200 LF

1030 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 8" or Greater)

200 LF

1031 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter < 3")

15 BAG

1032 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 3" or Greater but Less than 8")

15 BAG

1033 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 8" or Greater)

15 BAG

1034 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter < 3")

150 LF

1035 Asbestos Abatement: Pipe Insulation Fitting Removal by Intact Method (Pipe Diameter 3" or Greater but Less than 8")

150 LF

1036 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter 8" or Greater)

150 LF

1037 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings <= 8 Feet in Height)

250 SF

1038 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings > 8 Feet but <= 16 Feet in Height)

250 SF

1039 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings> 16 but <= 24 Feet in Height)

250 SF

1040 Abatement: Suspended Ceiling Tile per SF « or equal to 8 Feet in Height

500 SF

1041 Abatement: Suspended Ceiling Tile per SF (> 8 Feet but < = to 6 Feet in Height)

500 SF

1042 Abatement: Duct/Flue Insulation per LF (Less than 4 Feet Surface Area)

100 LF

1043 Abatement: Duct/Flue Insulation per LF (> 4 Feet but <= 8 Feet Surface Area)

100 LF

1044 Abatement: Duct/Flue Insulation per LF (> 8 Feet but <= 12

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

1045 Abatement: Tank/Boiler Insulation per SF 750 SF

1046 Abatement: Cement asbestos Board/Shingle Siding per SF <= 10 Feet in Height

500 SF

1047 Abatement: Cement asbestos Board/Shingle Siding per SF (> 10 Feet but <= 20 Feet in Height)

500 SF

1048 Abatement: Cement asbestos Board/Shingle Siding per SF (> 20 Feet but <= 30 Feet in Height)

500 SF

1049 Abatement: Non-Friable ACM V A T, including Adhesive/Mastic (per SF for Delivery Orders > 100 SF but <=

1,000 SF)

4850 SF

1050 Abatement: Non-Friable ACM VAT, including Adhesive/Mastic (per 1,000 SF (1K) for Delivery Orders> 1,000 SF but <= 10,000 SF)

15 1K SF

1051 LBP Abatement of Flat and Wood Trim Surfaces (per 100 SF for Delivery Orders < 1,000 SF)

5 100 SF

1052 LBP Abatement of Flat and Wood Trim Surfaces (per 1,000 SF for Delivery Orders >= 1,000 SF)

2 1K SF

1053 Abatement: Asbestos Debris per Cubic Yard (CY) 10 CY

1054 Handling/Transportation to Class I Landfill (per Mile) 2500 MI

1055 Handling/Transportation per CY 400 CY

1056 Disposal of Used Mastic Remover per 55 Gallon Drum 10 Drum

1057 Disposal of Lead-Based Paint per 5 to 55 Gallon Drum 5 Drum

1058 Maintenance/Repair: Penetrating Encapsulation 250 SF

1059 Maintenance/Repair: Bridging Encapsulation 250 SF

1060 Clearance Sampling (PCM) 12 Visit

1061 Reinsulation of Pipe per LF (Diameter Less than 3 ") 200 LF

1062 Reinsulation of Pipe per LF (Diameter 3" or Greater but Less than 8")

200 LF

1063 Reinsulation of Pipe per LF (Diameter 8" or Greater) 200 LF

1064 Reinsulation of Tank/Boiler per SF 500 SF

1065 Decontamination Unit (2 Stage) 7 EA

1066 Decontamination Unit (3 Stage) 15 EA

1067 Scaffolding, 1 Rise in Height, per Unit 10 EA

1068 Scaffolding, 2 Rises in Height, per Unit 4 EA

1069 Scaffolding, 3 Rises in Height, per Unit 5 EA

1070 Remove Carpet 15,000 SF

1071 Remove Linoleum (when Floor Tile and Linoleum are present, use this line for both removals)

1500 SF

ESTIMATED TOTAL AMOUNT OPTION 1 (CLINS 1001

THRU 1071) (Transfer to CLIN 1001)

OPTION TWO (2) 1 JUN 2013 THROUGH 31 MAY 2014 - TO PROVIDE LABOR, TOOLS, MATERIALS, IAW SPECIFICATION ATTACHED.

LINE

ITEM

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

2001 Preparation of Asbestos or Lead Based Paint Hazard Abatement Plan

8 EA

2002 Preparation of Asbestos or Lead Paint Sampling Plan 4 EA

2003 TCLP (Lead) Analysis 8 EA

2004 Removal and Return of General Office Furniture 5 1KSF

2005 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor (per 100 SF for Delivery Orders>100 SF but <= to 1,000 SF) For Areas with LESS than 6 Rooms

2006 Installation of Critical Barrier and Full Containment Area up to

Orders>100 SF but <= to 1,000 SF) For Areas with MORE than 6 Rooms

2007 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

4 1KSF

2008 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with MORE than 6 Rooms

2009 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

2010 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders>10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

2011 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

2012 Installation of Critical Barrier and Full Containment Area > 8 for Delivery > 100 SF but <= to 1,000 SF) for Areas with MORE than 6 Rooms

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

2013 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Hard Floor Surfaces (per 1000 SF for Delivery > 1000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

2014 Installation of Critical Barrier and Full Containment Area > 8

SF for Delivery Orders > 1,000 SF but <= 10,000 SF) Areas with MORE than 6 Rooms

2015 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

2016 Installation of Critical Barrier and Full Containment Area up to

1,000 SF for Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

2017 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

2018 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

2019 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with LESS than 6 Rooms

2020 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with MORE than 6 Rooms

2021 Installation of Critical Barrier and Full Containment Area > 8 Ft

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

2022 Installation of Critical Barrier and Full Containment Area > 8

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

2023 Removal of Lead-Based Paint Windows Metal Frames <200 SF

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

2024 Removal of Lead-Based Paint Windows Metal Frames >200 SF or<= 2,000 SF of Window Surface at Opening

500 SF

2025 Poly Enclosure of Fixed Equipment and/or Immovable Objects (per SF of Surface Area)

600 SF

2026 Air Monitoring and Testing (PCM) 75 EA

2027 Air Monitoring and Testing (Lead) 20 EA

2028 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter < 3 ")

LF

2029 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 3" or Greater but Less than 8")

200 LF

2030 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 8" or Greater)

200 LF

2031 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter < 3")

15 BAG

2032 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 3" or Greater but Less than 8")

15 BAG

2033 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 8" or Greater)

15 BAG

2034 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter < 3")

150 LF

2035 Asbestos Abatement: Pipe Insulation Fitting Removal by Intact Method (Pipe Diameter 3" or Greater but Less than 8")

150 LF

2036 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter 8" or Greater)

150 LF

2037 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings <= 8 Feet in Height)

250 SF

2038 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings > 8 Feet but <= 16 Feet in Height)

250 SF

2039 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings> 16 but <= 24 Feet in Height)

250 SF

2040 Abatement: Suspended Ceiling Tile per SF « or equal to 8 Feet in Height

500 SF

2041 Abatement: Suspended Ceiling Tile per SF (> 8 Feet but < = to 6 Feet in Height)

500 SF

2042 Abatement: Duct/Flue Insulation per LF (Less than 4 Feet Surface Area)

100 LF

2043 Abatement: Duct/Flue Insulation per LF (> 4 Feet but <= 8 Feet Surface Area)

100 LF

2044 Abatement: Duct/Flue Insulation per LF (> 8 Feet but <= 12

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

2045 Abatement: Tank/Boiler Insulation per SF 750 SF

2046 Abatement: Cement asbestos Board/Shingle Siding per SF <= 10 Feet in Height

500 SF

2047 Abatement: Cement asbestos Board/Shingle Siding per SF (> 10 Feet but <= 20 Feet in Height)

500 SF

2048 Abatement: Cement asbestos Board/Shingle Siding per SF (> 20 Feet but <= 30 Feet in Height)

500 SF

2049 Abatement: Non-Friable ACM V A T, including Adhesive/Mastic (per SF for Delivery Orders > 100 SF but <=

1,000 SF)

4850 SF

2050 Abatement: Non-Friable ACM VAT, including Adhesive/Mastic (per 1,000 SF (1K) for Delivery Orders> 1,000 SF but <= 10,000 SF)

15 1K SF

2051 LBP Abatement of Flat and Wood Trim Surfaces (per 100 SF for Delivery Orders < 1,000 SF)

5 100 SF

2052 LBP Abatement of Flat and Wood Trim Surfaces (per 1,000 SF for Delivery Orders >= 1,000 SF)

2 1K SF

2053 Abatement: Asbestos Debris per Cubic Yard (CY) 10 CY

2054 Handling/Transportation to Class I Landfill (per Mile) 2500 MI

2055 Handling/Transportation per CY 400 CY

2056 Disposal of Used Mastic Remover per 55 Gallon Drum 10 Drum

2057 Disposal of Lead-Based Paint per 5 to 55 Gallon Drum 5 Drum

2058 Maintenance/Repair: Penetrating Encapsulation 250 SF

2059 Maintenance/Repair: Bridging Encapsulation 250 SF

2060 Clearance Sampling (PCM) 12 Visit

2061 Reinsulation of Pipe per LF (Diameter Less than 3 ") 200 LF

2062 Reinsulation of Pipe per LF (Diameter 3" or Greater but Less than 8")

200 LF

2063 Reinsulation of Pipe per LF (Diameter 8" or Greater) 200 LF

2064 Reinsulation of Tank/Boiler per SF 500 SF

2065 Decontamination Unit (2 Stage) 7 EA

2066 Decontamination Unit (3 Stage) 15 EA

2067 Scaffolding, 1 Rise in Height, per Unit 10 EA

2068 Scaffolding, 2 Rises in Height, per Unit 4 EA

2069 Scaffolding, 3 Rises in Height, per Unit 5 EA

2070 Remove Carpet 15,000 SF

2071 Remove Linoleum (when Floor Tile and Linoleum are present, use this line for both removals)

1500 SF

ESTIMATED TOTAL AMOUNT OPTION 2 (CLINS 2001

THRU 2071) (TRANSFER TO CLIN 2001)

OPTION THREE (3) 1 JUN 2014 THROUGH 31 MAY 2015 - TO PROVIDE LABOR, TOOLS, MATERIALS, IAW SPECIFICATION ATTACHED.

LINE

ITEM

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

3001 Preparation of Asbestos or Lead Based Paint Hazard Abatement Plan

8 EA

3002 Preparation of Asbestos or Lead Paint Sampling Plan 4 EA

3003 TCLP (Lead) Analysis 8 EA

3004 Removal and Return of General Office Furniture 5 1KSF

3005 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor (per 100 SF for Delivery Orders>100 SF but <= to 1,000 SF) For Areas with LESS than 6 Rooms

3006 Installation of Critical Barrier and Full Containment Area up to

Orders>100 SF but <= to 1,000 SF) For Areas with MORE than 6 Rooms

3007 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

4 1KSF

3008 Installation of Critical Barrier and Full Containment Area up to 8 Ft. in Height for Hard Floor Surfaces (per 1,000 SF for Delivery Orders > 1,000 SF but <= to 10,000 SF) for Areas with MORE than 6 Rooms

3009 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

3010 Installation of Critical Barrier and Full Containment Area up to

Delivery Orders>10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

3011 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

3012 Installation of Critical Barrier and Full Containment Area > 8 for Delivery > 100 SF but <= to 1,000 SF) for Areas with MORE than 6 Rooms

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

3013 Installation of Critical Barrier and Full Containment Area > 8 Ft. but <= 16 Ft. in Height for Hard Floor Surfaces (per 1000 SF for Delivery > 1000 SF but <= to 10,000 SF) for Areas with LESS than 6 Rooms

3014 Installation of Critical Barrier and Full Containment Area > 8

SF for Delivery Orders > 1,000 SF but <= 10,000 SF) Areas with MORE than 6 Rooms

3015 Installation of Critical Barrier and Full Containment Area >8 Ft.

for Delivery >10,000 SF but <= 20,000 SF) for Areas with LESS than 6 Rooms

3016 Installation of Critical Barrier and Full Containment Area up to

1,000 SF for Delivery Orders > 10,000 SF but <= 20,000 SF) for Areas with MORE than 6 Rooms

3017 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

3018 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

3019 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with LESS than 6 Rooms

3020 Installation of Critical Barrier and Full Containment Area <= 8

Orders > 1,000 SF but <= 10,000 SF) for Areas with MORE than 6 Rooms

3021 Installation of Critical Barrier and Full Containment Area > 8 Ft

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with LESS than 6 Rooms

3022 Installation of Critical Barrier and Full Containment Area > 8

Delivery Orders > 100 SF but <= 1,000 SF) for Areas with MORE than 6 Rooms

3023 Removal of Lead-Based Paint Windows Metal Frames <200 SF

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

3024 Removal of Lead-Based Paint Windows Metal Frames >200 SF or<= 2,000 SF of Window Surface at Opening

500 SF

3025 Poly Enclosure of Fixed Equipment and/or Immovable Objects (per SF of Surface Area)

600 SF

3026 Air Monitoring and Testing (PCM) 75 EA

3027 Air Monitoring and Testing (Lead) 20 EA

3028 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter < 3 ")

LF

3029 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 3" or Greater but Less than 8")

200 LF

3030 Asbestos Abatement: Pipe Insulation Fitting Removal in Containment per LF (Pipe Diameter 8" or Greater)

200 LF

3031 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter < 3")

15 BAG

3032 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 3" or Greater but Less than 8")

15 BAG

3033 Asbestos Abatement: Pipe Insulation Fitting Removal in Glove Bags per LF (Pipe Diameter 8" or Greater)

15 BAG

3034 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter < 3")

150 LF

3035 Asbestos Abatement: Pipe Insulation Fitting Removal by Intact Method (Pipe Diameter 3" or Greater but Less than 8")

150 LF

3036 Asbestos Abatement: Pipe Insulation/Fitting Removal by Intact Method (Pipe Diameter 8" or Greater)

150 LF

3037 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings <= 8 Feet in Height)

250 SF

3038 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings > 8 Feet but <= 16 Feet in Height)

250 SF

3039 Abatement: Spray-On Insulation Removal per SF (Flat Ceilings> 16 but <= 24 Feet in Height)

250 SF

3040 Abatement: Suspended Ceiling Tile per SF « or equal to 8 Feet in Height

500 SF

3041 Abatement: Suspended Ceiling Tile per SF (> 8 Feet but < = to 6 Feet in Height)

500 SF

3042 Abatement: Duct/Flue Insulation per LF (Less than 4 Feet Surface Area)

100 LF

3043 Abatement: Duct/Flue Insulation per LF (> 4 Feet but <= 8 Feet Surface Area)

100 LF

3044 Abatement: Duct/Flue Insulation per LF (> 8 Feet but <= 12 Feet Surface Area)

3045 Abatement: Tank/Boiler Insulation per SF 750 SF

DESCRIPTION EST

QTY

UNIT UNIT

PRICE

EST AMT

3046 Abatement: Cement asbestos Board/Shingle Siding per SF <= 10 Feet in Height

500 SF

3047 Abatement: Cement asbestos Board/Shingle Siding per SF (> 10 Feet but <= 20 Feet in Height)

500 SF

3048 Abatement: Cement asbestos Board/Shingle Siding per SF (> 20 Feet but <= 30 Feet in Height)

500 SF

3049 Abatement: Non-Friable ACM V A T, including Adhesive/Mastic (per SF for Delivery Orders > 100 SF but <=

1,000 SF)

4850 SF

3050 Abatement: Non-Friable ACM VAT, including Adhesive/Mastic (per 1,000 SF (1K) for Delivery Orders> 1,000 SF but <= 10,000 SF)

15 1K SF

3051 LBP Abatement of Flat and Wood Trim Surfaces (per 100 SF for Delivery Orders < 1,000 SF)

5 100 SF

3052 LBP Abatement of Flat and Wood Trim Surfaces (per 1,000 SF for Delivery Orders >= 1,000 SF)

2 1K SF

3053 Abatement: Asbestos Debris per Cubic Yard (CY) 10 CY

3054 Handling/Transportation to Class I Landfill (per Mile) 2500 MI

3055 Handling/Transportation per CY 400 CY

3056 Disposal of Used Mastic Remover per 55 Gallon Drum 10 Drum

3057 Disposal of Lead-Based Paint per 5 to 55 Gallon Drum 5 Drum

3058 Maintenance/Repair: Penetrating Encapsulation 250 SF

3059 Maintenance/Repair: Bridging Encapsulation 250 SF

3060 Clearance Sampling (PCM) 12 Visit

3061 Reinsulation of Pipe per LF (Diameter Less than 3 ") 200 LF

3062 Reinsulation of Pipe per LF (Diameter 3" or Greater but Less than 8")

200 LF

3063 Reinsulation of Pipe per LF (Diameter 8" or Greater) 200 LF

3064 Reinsulation of Tank/Boiler per SF 500 SF

3065 Decontamination Unit (2 Stage) 7 EA

3066 Decontamination Unit (3 Stage) 15 EA

3067 Scaffolding, 1 Rise in Height, per Unit 10 EA

3068 Scaffolding, 2 Rises in Height, per Unit 4 EA

3069 Scaffolding, 3 Rises in Height, per Unit 5 EA

3070 Remove Carpet 15,000 SF

3071 Remove Linoleum (when Floor Tile and Linoleum are present, use this line for both removals)

1500 SF

ESTIMATED TOTAL AMOUNT OPTION 3 (CLINS 3001

THRU 3071) (TRANSFER TO CLIN 3001)

Section E - Inspection and Acceptance

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

CLIN INSPECT AT INSPECT BY ACCEPT AT ACCEPT BY

0001 Destination Government Destination Government 1001 Destination Government Destination Government 2001 Destination Government Destination Government 3001 Destination Government Destination Government

CLAUSES INCORPORATED BY REFERENCE

52.246-12 Inspection of Construction AUG 1996

Section F - Deliveries or Performance

DELIVERY INFORMATION

CLIN DELIVERY DATE QUANTITY SHIP TO ADDRESS UIC

0001 POP 15-JAN-2012 OR

DATE OF AWARD TO

31-MAY-2012

N/A 60 CES/CEOE - F3Z384

LINDA KARCHESKY

411 AIRMAN DRIVE

TRAVIS AFB CA 94535

707-424-3917 FOB: Destination

F3Z384

1001 POP 01-JUN-2012 TO

31-MAY-2013

N/A (SAME AS PREVIOUS LOCATION)

2001 POP 01-JUN-2013 TO

31-MAY-2014

N/A (SAME AS PREVIOUS LOCATION)

3001 POP 01-JUN-2014 TO

31-MAY-2015

N/A (SAME AS PREVIOUS LOCATION)

52.247-34 F.O.B. Destination NOV 1991

CLAUSES INCORPORATED BY FULL TEXT

52.211-12 LIQUIDATED DAMAGES--CONSTRUCTION (SEP 2000)

(a) If the Contractor fails to complete the work within the time specified in the contract, the Contractor shall pay liquidated damages to the Government in the amount of $249.00 for each calendar day of delay until the work is completed or accepted.

(b) If the Government terminates the Contractor's right to proceed, liquidated damages will continue to accrue until the work is completed. These liquidated damages are in addition to excess costs of repurchase under the Termination clause.

(End of clause)

Section G - Contract Administration Data

Section G - Contract Administration Data

1.1 ADMINISTRATIVE MATTERS

The address and telephone number for Construction Flight:

60th Contracting Squadron

60CONS/LGCA

350 Hangar Ave Bldg 549 Travis AFB CA 94535-2632

(707) 424-7749

1.2 CONTRACTOR’S CONTRACT ADMINISTRATION

To Be Completed By The Contractor:

Name and Title:

Responsible Office:

Address:

Telephone Number:

Email:

Cage Code:

Duns Number:

Tax Identification Number:

1.3 INDIVIDUAL(S) AUTHORIZED TO NEGOTIATE OR DISCUSS PROPOSAL

Name of Primary: Name of Alternate:

Address: Address:

Telephone #: Telephone #:

Alternate #: Alternate #:

Fax No: Fax No:

Email: Email:

1.4 INVOICES

Individual delivery orders issued against this contract will establish specific invoicing procedures. Wide area work flow (electronic invoicing/payment system) is required for payment under this contract unless specified otherwise.

1.5 WIDE AREA WORK FLOW INSTRUCTIONS

Wide Area Work Flow Receipt and Acceptance (WAWF-RA) Vendor Instructions Installation and Registration Checklist

Completion of all instructions contained in this checklist must be accomplished prior to activation of the firm and user accounts

1. Check Central Contractor Registration System (CCR) (www.ccr.gov) to see if your company is registered.

a. If you are registered in CCR, please go to Step 3 below.

b. For help with registration in CCR, contact the CCR Help desk, 888-227-2423 or e-mail CCR@dlis.dla.mil or see the CCR

Handbook at http://www.ccr.gov/handbook.cfm.

2. Register with Central Contractor Registry (CCR).

a. All vendors desiring to quote on goods or services in support of the Department of Defense (DoD) must be registered in the CCR at http://www.ccr.gov/.

b. Ensure that all mandatory fields are completed in your new CCR account (i.e., Telephone/Fax number, Data Universal Numbering System (DUNS) and/or Commercial and Government Entity (CAGE) codes, North American Industry Code Systems (NAICS) codes, etc).

Note: All contractors are required to update their CCR registration annually. Failure to do so will result in suspension of the account, which will prevent or delay awarding DoD contracts and payments to your firm.

3. Establish an Electronic Business Point of Contact (EB POC).

a. The next step is to ensure that you have identified an EB POC for your company. You are required to establish both a primary and alternate EB POC for each CAGE/DUNS code assigned to the firm.

b. To see if an EB POC is listed for your company, go to http://www.ccr.gov/ and click on “Search CCR.” Where prompted, enter the DUNS or CAGE or Company Name and click “Submit Query.” If you are presented with a list of DUNS numbers, you will need to pick the specific location and click on the DUNS.

c. Scroll to the bottom of the Inquiry Results page. There you can see if anyone is listed as the EB POC. If no one is listed, your company has not identified an EB POC yet. If you see that there is no one listed as your company’s EB POC, you need to click on “Update or Renew Registrations Using TPIN” to add it.

d. Each vendor organization may establish up to two EB POC’s (primary and alternate) for each CAGE/DUNS combination.

e. The EB POC will be responsible for authorizing access to employee(s) of the vendor’s organization to view and/or modify data submitted on behalf of the vendor.

f. Update NAICS codes developed by the Census Bureau, which replaced the Standard Industrial Classification (SIC) codes.

Until NAICS codes are updated, update will not be complete. For more info on NAICS codes, visit:

http://www.census.gov/epcd/www/naics.html

4. Establish a group in WAWF-RA associated with your cage code(s). This can be done by calling DISA-Ogden Customer Support at 1-800-392-1798 or by e-mailing cscassig@ogden.disa.mil

5. Determine if your organization will designate a Group Administrator (GAM). (Proceed to paragraph 6 if you are not going to designate a GAM).

a. In medium to large sized companies, there may be need to establish more than one GAM.

b. A GAM determines who has access to the WAWF-RA vendor account.

c. The initial GAM shall be the person designated as the EB POC. To appoint additional GAM’s, each vendor must submit an official appointment letter signed by the EB POC.

d. The appointment letter should be faxaed to the WAWF-RA Customer Support Center.

e. The Group Administrator’s Manual is available for reviewing to all WAWF-RA registered users.

f. The GAM Manual can be found in the Software Users Manual link within the WAWF-RA application.

6. Establish an organizational e-mail address

a. All records created in WAWF-RA are stored in a virtual file folder and as status is updated or changes, the system generates an e-mail notification to applicable individuals identified in the firm’s organizational e-mail account.

b. The GAM or EB POC shall provide the organizational e-mail to the WAWF-RA Customer Support Center.

c. Ensure that your firm’s organizational e-mail address is operational and can receive e-mail from WAWF-RA prior to registering your e-mail address with the WAWF-RA Customer Support Center.

Note: If you do not set up an organizational e-mail address, the personal e-mail address of the first person who self-registers from your firm (CAGE/DUNS code), will be designated as the organizational e-mail address for your firm.

7. Set up PCs to access WAWF-RA

a. Set up the PCs of your organization’s users to access WAWF-RA.

b. Select the “Setting Up Your Machine” link on the WAWF-RA home page. For more information:

https://wawf.eb.mil/Instr.html.

8. Have all users self-register on the WAWF-RA website

a. Every user for your firm must self-register on the WAWF-RA website by completing the on-line registration form.

b. Select the “Self Register” link on the WAWF-RA home page and follow the instructions.

c. Users may access WAWF-RA with either a User ID/Password combination or a PKI certificate. Users who want to use a PKI certificate must obtain it before self-registering.

d. PKI Certificates may be obtained from one of the approved Interim External Certificate Authorities: Operation Research

Consultants Inc. http://eca.orc.com, Digital Signature Trust Co. http://www.digsigtrust.com/home.html, or Verisign:

http://www.verisign.com. The web sites provide the instructions needed to acquire a PKI Certificate.

e. If further assistance is needed, contact the WAWF-RA Customer Service Center.

Note: Registrations will not be activated until the WAWF-RA Customer Support Center receives an e-mail from the EB

POC/GAM as registered in the CCR database.

9. Follow-Up (If necessary).

If your (GAM or user) account hasn’t been activated within two business days of self-registering contact the WAWF-RA Customer Service Center:CONUS Only: 1-800-392-1798, Option 1 COMMERCIAL: 801-777-3282, Option 1 DSN 777-3282, Option 1 FAX Commercial: 801-605-7453, DSN: 388-7543 E-Mail: cscassig@ogden.disa.mil Note: Reference “WAWF” in e-mail Subject line

WIDE AREA WORKFLOW – RECEIPT AND ACCEPTANCE (WAWF-RA)

ELECTRONIC RECEIVING REPORT AND INVOICING INSTRUCTIONS

IN ACCORDANCE WITH DFARS 232.7002, USE OF ELECTRONIC PAYMENT REQUESTS IS MANDATORY. USE OF WAWF WILL SPEED UP YOUR PAYMENT PROCESSING TIME AND ALLOW YOU TO MONITOR YOUR PAYMENT

STATUS ONLINE. THERE ARE NO CHARGES OR FEES TO USE WAWF.

Requests for payments must be submitted electronically via the Internet through the Wide Area Work Flow – Receipt and Acceptance (WAWF-RA) system at https://wawf.eb.mil.

Questions concerning payment should be directed to the Defense Finance Accounting Services (DFAS) Omaha at (800) 330-8168 or faxed to (800) 554-0527. Please have your order number and invoice number ready when contacting DFAS about payment status.

You can also access payment information using the DFAS Vendor Pay Inquiry System (VPIS) web site at http://www.dfas.mil/money/vendor.

CODES WILL…