Amend 02 Attch 3 - Drawings Rev1.pdf

PDF 5 MB Posted Aug 6, 2020

Attached to: Repair Interiors 505 TRS and 705 TRS, Bldg 90021
Solicitation number: FA441720R0015
Issued by: Department of the Air Force Special Operations Command

About this file

Written by GovTribe AI · Dec 28, 2023

This federal solicitation seeks proposals for the repair of interiors at buildings 505 TRS and 705 TRS located at Building 90021. The work includes partial demolition and new construction on the first and second floors. On the first floor, partial demolition of the existing warehouse floor slab is required for new plumbing and foundation supports for the new second floor deck. The first floor work also includes new bathrooms, a mechanical room, classrooms, labs and support spaces. Second floor demolition involves partial removal of an existing mezzanine area to tie in the new second floor slab. The second floor renovations include new areas within the existing building allowed by the installed new floor slab over the existing warehouse below. These new second floor areas will consist of break rooms, bathrooms, a mechanical room, offices, classrooms and training/conference rooms along with other support spaces. A new prefabricated metal stairway with precast treads and landings will be installed on the south side of the existing building. Demolition on both floors includes new penetrations through existing interior and exterior walls. The solicitation was issued by the Department of the Air Force Special Operations Command.

View the file

Other files

File	Type	Posted
Amend 02 Attch 2 - Spec Rev1.pdf	PDF	Aug 6, 2020
Amend 02 Attch 1 - Addendum 1 dated 06 Aug 2020.pdf	PDF	Aug 6, 2020
Amendment 02 - FA441720R0015.pdf	PDF	Aug 6, 2020
Amend 02 Attch 4 - Revised Question 60 Response.pdf	PDF	Aug 6, 2020
Site Visit Questions and Responses 60-64.pdf	PDF	Aug 3, 2020
Site Visit Questions and Responses.pdf	PDF	Jul 29, 2020
Solicitation Amendment FA441720R00150001.pdf	PDF	Jul 28, 2020
Site Visit MFR and Sign In Sheet.pdf	PDF	Jul 14, 2020
Attch 4 - PPQ.docx	DOCX document	Jul 1, 2020
Attch 3 - Wage Det.pdf	PDF	Jul 1, 2020
Attch 6 - 50 Division Construction Cost Estimate Worksheet.xls	XLS spreadsheet	Jul 1, 2020
Attch 5 - Financial Worksheet.docx	DOCX document	Jul 1, 2020
Attch 1 - Specifications 20200529.pdf	PDF	Jul 1, 2020
Solicitation - FA441720R0015.pdf	PDF	Jul 1, 2020
Attch 2 - Drawings 20200529.pdf	PDF	Jul 1, 2020

Show all 15

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

E FD G H J KB.9 C C.4 C.6B.7B.6B.5BA

2.1

2.2

2.5

2.8

3.2

2.9

3.3

3.7

3.8

3.9

2.7

SECOND FLOOR NEW WORK AREA.

WORK OUTSIDE THIS BOUNDARY TO

BE COORDINATED W/ TENANTS AND

BASE PRIOR TO CONSTRUCTION

DUST CONTROL PARTITION

STAIR 1

ELEV

WOMENS

JAN

MENS

STAIR 2

3.85

DUST CONTROL PARTITION

PORTION OF EXISTING ROOM 201

SHALL REMAIN OCCUPIED, INCLUDING

EXISTING FURNITURE SYSTEMS,

DURING CONSTRUCTION

IN EXISTING ROOM 201 ONLY,

GOVERNMENT TO REMOVE EXISTING

FURNITURE SYSTEMS AS NEEDED

AND STORE PRIOR TO

CONSTRUCTION

PHASING NOTES

DUST PARTITION TO

CONTROL DEBRIS

STRUCTURE ABOVE

3 5/8" METAL STUD @16" O.C.

5/8" TYPE "X" GYPSUM

WALLBOARD, PRIMED

WORK AREA BOUNDARY

DUST CONTROL PARTITION SECTION

1. WORK BOUNDARY IS NOT MEANT TO IMPOSE

STRICT WORK AREAS. WORK WILL OCCUR

OUTSIDE BOUNDARY AND BE COORDINATED

WITH GOVERNMENT.

2. CONTROL DUST, DEBRIS, AND NOISE DURING

CONSTRUCTION IN THE OCCUPIED BUILDING.

3. AIR FORCE MISSIONS MAY IMPACT

CONSTRUCTION WORK. GOVERNMENT WILL

COORDINATE FOR SUCH SITUATIONS.

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-113

29 MAY 2020

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

C W

U I L D

I N

1/8" = 1'-0"

A-113

1 SECOND FLOOR - PHASING PLAN

PLAN

NORTH

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

PLAN

NORTH

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

3.9

3.7

3.3

3.8

3.85

3.2

2.7

2.5

2.8

2.9

2.1

2.2

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

REMOVE EXISTING

SHIP LADDER

REMOVE PORTION OF

EXISTING WALL TO +8'-0"

A.F.F. AND PREP

OPENING FOR

INSTALLATION OF NEW

DOOR AND FRAME

REMOVE EXISTING

DOOR AND FRAME AND

PREP OPENING TO

RECEIVE NEW INFILL

REMOVE PORTION OF

EXISTING WALL TO +8'-0"

A.F.F. AND PREP

OPENING FOR

INSTALLATION OF NEW

DOOR AND FRAME

3'- 4"

8'-4" 2'-8"

10"

3'-4"

SEE STRUCTURAL

DRAWINGS FOR EXTENT

OF DEMOLITION FOR

NEW FOOTINGS

REMOVE EXISTING GYP. BD. CEILING

AS NECESSARY FOR INSTALLATION

OF NEW PLUMBING ABOVE.

CONTRACTOR TO COORDINATE

PRIOR TO CONSTRUCTION

THE

CONTRACTOR

SHALL REMOVE

ALL EXISTING

STORAGE RACKS

AND UNITS AND

ASSOCIATED FIRE

SUPPRESSION

SYSTEM

SEE PLUMBING DRAWINGS

FOR EXTENT OF

DEMOLITION FOR NEW

SANITARY SEWER LINES

REMOVE EXISTING DOOR AND

FRAME AND PREP OPENING TO

RECEIVE NEW INFILL. COORDINATE

W/ EXISTING USER PRIOR TO

CONSTRUCTION

A-501

TYP.

REMOVE EXISTING

COILING DOOR AND

FRAME AND PREP

OPENING TO RECEIVE

NEW INFILL

REMOVE EXISTING ACOUSTICAL

CEILING TILES AS NECESSARY FOR

INSTALLATION OF NEW PLUMBING

ABOVE. CONTRACTOR TO

COORDINATE PRIOR TO

CONSTRUCTION

REMOVE PORTION OF

EXISTING WALL TO 7'-2"

A.F.F. AND PREP OPENING

FOR NEW STOREFRONT

INSTALLATION

1. THE GOVERNMENT WILL REMOVE EQUIPMENT PRIOR TO BUILDING

DEMOLITION.

2. GENERAL DEMOLITION WORK TO THE EXISTING BUILDING FOR THE

INSTALLATION OF NEW UTILITIES AND SERVICES SHALL BE INCLUDED IN

THE SCOPE OF WORK. SAW-CUTTING AND EXCAVATION; FILLING AND

PATCHING OF EXISTING CONCRETE FLOOR SLABS TO REMAIN AFTER

INSTALLATION OF NEW UTILITIES AND SERVICES SHALL ALSO BE

INCLUDED IN THE SCOPE OF WORK. REFER TO PLUMBING AND

ELECTRICAL DRAWINGS FOR NEW UTILITIES AND SERVICES. COORDINATE

WITH STRUCTURAL FOR VAPOR BARRIER AT SLAB REPAIR.

3. PATCHING OF EXISTING STUD WALLS AND GYPSUM WALLBOARD TO

REMAIN SHALL ALSO BE INCLUDED IN SCOPE OF WORK.

4. REFER TO ELECTRICAL, PLUMBING AND MECHANICAL DRAWINGS FOR

ADDITIONAL DEMOLITION REQUIREMENTS.

5. USE POWER DRIVEN CUTTING TOOLS TO THE GREATEST EXTENT

POSSIBLE, USING WET CUTTING TECHNIQUES TO AVOID DUST.

6. REMOVE DEBRIS FROM CONSTRUCTION AREA DAILY.

7. COORDINATE WITH THE GOVERNMENT TO REQUEST FLAME CUTTING.

8. COORDINATE WITH ALL DISCIPLINES TO FIELD LOCATE CUTTING.

9. REMOVE ALL CARPET AND GLUE IN AFFECTED ROOMS AND PREP

FLOOR FOR NEW FINISHES. ENSURE SMOOTH FLOOR FOR CARPET

INSTALLATION. COORDINATE WITH FINISH SCHEDULE.

DEMOLITION NOTES

REMOVE EXISTING CONSTRUCTION

(AS INDICATED WITH DASHED LINES)

EXISTING CONSTRUCTION TO

REMAIN (AS INDICATED WITH LIGHT

SOLID LINES)

EXISTING DOOR TO REMAIN

REMOVE EXISTING DOOR,

FRAME AND HARDWARE

GRAPHIC LEGEND

ROOM NAME / NUMBER

DESIGNATION

ROOM NAME

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-114

29 MAY 2020

- D

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

A-114

1 FIRST FLOOR - DEMOLITION PLAN

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

PLAN

NORTH

100% SUBMITTAL

8/6 /20

1255149268C Polygon

1255149268C Typewritten Text

1255149268C Polygon

3.9

3.7

3.8

3.85

2.1

2.2

2.5

2.8

3.3

3.2

2.7

2.9

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

IN EXISTING ROOM 201 ONLY,

GOVERNMENT TO REMOVE EXISTING

FURNITURE SYSTEMS AS NEEDED

AND STORE PRIOR TO

CONSTRUCTION

REMOVE EXISTING CANTILEVERED

MEZZANINE FLOOR

REMOVE ALL EXISTING MEZZANINE

RAILING & PREPARE AREA TO RECEIVE

ADJACENT NEW FLOOR SYSTEM

6'- 0" 2'-

3'- 4"

2'- 2"

8'- 4"

2'- 6"

REMOVE GYPSUM WALL

BOARD AND FURRING

REMOVE

GYPSUM

WALL BOARD

AND FURRING

A-501

3'- 4"

A-501

REMOVE PORTION

OF EXISTING WALL

AND PREP

SURFACES FOR

NEW DOOR

REMOVE PORTION OF

EXISTING WALL AND PREP

SURFACES FOR NEW

WORK

'-1

0" 6'-

A-501

PORTION OF EXISTING ROOM 201

SHALL REMAIN OCCUPIED, INCLUDING

EXISTING FURNITURE SYSTEMS,

DURING CONSTRUCTION

1. THE GOVERNMENT WILL REMOVE EQUIPMENT PRIOR TO BUILDING

DEMOLITION.

2. GENERAL DEMOLITION WORK TO THE EXISTING BUILDING FOR THE

INSTALLATION OF NEW UTILITIES AND SERVICES SHALL BE INCLUDED IN

THE SCOPE OF WORK. SAW-CUTTING AND EXCAVATION; FILLING AND

PATCHING OF EXISTING CONCRETE FLOOR SLABS TO REMAIN AFTER

INSTALLATION OF NEW UTILITIES AND SERVICES SHALL ALSO BE

INCLUDED IN THE SCOPE OF WORK. REFER TO PLUMBING AND

ELECTRICAL DRAWINGS FOR NEW UTILITIES AND SERVICES. COORDINATE

WITH STRUCTURAL FOR VAPOR BARRIER AT SLAB REPAIR.

3. PATCHING OF EXISTING STUD WALLS AND GYPSUM WALLBOARD TO

REMAIN SHALL ALSO BE INCLUDED IN SCOPE OF WORK.

4. REFER TO ELECTRICAL, PLUMBING AND MECHANICAL DRAWINGS FOR

ADDITIONAL DEMOLITION REQUIREMENTS.

5. USE POWER DRIVEN CUTTING TOOLS TO THE GREATEST EXTENT

POSSIBLE, USING WET CUTTING TECHNIQUES TO AVOID DUST.

6. REMOVE DEBRIS FROM CONSTRUCTION AREA DAILY.

7. COORDINATE WITH THE GOVERNMENT TO REQUEST FLAME CUTTING.

8. COORDINATE WITH ALL DISCIPLINES TO FIELD LOCATE CUTTING.

9. REMOVE ALL CARPET AND GLUE IN AFFECTED ROOMS AND PREP

FLOOR FOR NEW FINISHES. ENSURE SMOOTH FLOOR FOR CARPET

INSTALLATION. COORDINATE WITH FINISH SCHEDULE.

DEMOLITION NOTES

REMOVE EXISTING CONSTRUCTION

(AS INDICATED WITH DASHED LINES)

EXISTING CONSTRUCTION TO

REMAIN (AS INDICATED WITH LIGHT

SOLID LINES)

EXISTING DOOR TO REMAIN

REMOVE EXISTING DOOR,

FRAME AND HARDWARE

GRAPHIC LEGEND

ROOM NAME / NUMBER

DESIGNATION

ROOM NAME

REMOVE PORTIONS OF

EXISTING

CEILING TILE AND GRID

AS REQUIRED FOR

ABOVE CEILING WORK

AND REINSTALL

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-115

29 MAY 2020

LIT

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

A-115

1 SECOND FLOOR - DEMOLITION PLAN

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

PLAN

NORTH

1/16" = 1'-0"

A-115

2 SECOND FLOOR - DEMO RCP

PLAN

NORTH

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

1255149268C Polygon

1255149268C Typewritten Text

A-201

CLASSROOM

LAB

CORRIDOR

MECHANICAL

ROOM

MEN'S

WOMEN'S

EX, IDS

OBSERV. ROOM

CORRIDOR

ENT/EX,

IDS

LAB

A-301

142A

JAN.

A-401

A-605

A-503

1 1

A-503

A-502

Sim

LINE OF CANOPY ABOVE

COORDINATE WITH CIVIL

FOR SIDEWALK LOCATION

EWC

A-605

A-503

INFILL OPENING TO MATCH EXISTING WALL

78A

GRAPHIC LEGEND

ROOM NAME / NUMBER

DESIGNATION

ROOM NAME

NEW WALL CONSTRUCTION

EXISTING WALL

C CIPHER LOCK

SECURE AREA LIMITS

ENT/EX ENTRANCE/ EXIT DOOR

EX EXIT DOOR ONLY

IDS INTRUSION DETECTION SYSTEM

ACS ACCESS CONTROL SYSTEM

WB WHITE BOARD (CF/CI)

WALL TYPE

S WALL MOUNTED, MOTORIZED

PROJECTION SCREEN (CF/CI)

WINDOW TYPE

EWC ELECTRIC WATER COOLER, SEE

PLUMBING DRAWINGS

O M

FLOOR PLAN NOTES

1. SEE SHEET A-002 FOR WALL CONSTRUCTION

LEGEND.

2. PROVIDE GYPSUM WALLBOARD CONTROL JOINTS @

30'-0" OC MAX.

3. PROVIDE BLOCKING IN WALLS FOR CORNER

GUARDS, TV BRACKETS, TOILET ACCESSORIES, AND

OTHER WALL MOUNTED ITEMS.

4. REFER TO WALL SECTIONS AND PLAN DETAILS FOR

SPECIFIC WALL DIMENSIONS TO COLUMN LINE AND

EXISTING CONSTRUCTION.

5. PLAN DRAWINGS ARE GENERATED BY A CUT

THROUGH THE WALL AT A HEIGHT OF APPROXIMATELY

48”. COMPONENTS IN OR ON THE WALL ABOVE OR

BELOW THIS PLANE MAY NOT BE IDENTIFIED IN THIS

PLAN VIEW. SEE ELEVATION VIEWS FOR

IDENTIFICATION OF ALL WALL COMPONENTS AND

OPENINGS.

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

A-120

29 MAY 2020

- N

JGH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

A-120

1 FIRST FLOOR - NOTE PLAN

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

PLAN

NORTH

100% SUBMITTAL

8/6 /20

1255149268C Polygon

1255149268C Typewritten Text

SECURITY & IT

SUPPORT

E-214

A-301

A-201

219B

E-220

E-219

E-221

E-222

E-223

E-202

E-203

225 226

205A

224B

224A

D W

VTC/COMM

CONFERENCE

ROOM

CLASSROOM 1

CLASSROOM 2

CLASSROOM 3

MEN'S WOMEN'S

CORRIDOR

OBSERV. ROOM

CORR.

STUDENT

BREAKROOM

SM OFFICE

OFFICE

LINE OF CMU WALL AT 1ST

FLOOR BELOW

LINE OF CMU WALL AT

1ST FLOOR BELOW

STOVE

MECHANICAL

ROOM

KITCHEN

EX, IDS

ENT/EX,

IDS, C

ENT/EX,

IDS

CONFERENCE

ROOM

705 OPERATIONS /

OCTP

ACADEMIC

DIRECTOR

OFFICE

PTT LAB

505 TRG

705 TRS

EXISTING

MECHANICAL

ROOM

EXISTING ELEC

229A

233A

234A

241A

235A 235B

241B

224A

A-401

6 6

A-402

A-605

A-503

5/8" TYPE "X"

GYPSUM BOARD

ON 7/8" FURRING

A-603

COMMANDER

ROOM

DEPUTY

SENIOR MENTOR

EWC

A-501

A-503

A-605

ENT/EX,

IDS

ROOM NAME

GRAPHIC LEGEND

ROOM NAME / NUMBER

DESIGNATION

NEW WALL CONSTRUCTION

EXISTING WALL

C CIPHER LOCK

SECURE AREA LIMITS

ENT/EX ENTRANCE/ EXIT DOOR

EX EXIT DOOR ONLY

IDS INTRUSION DETECTION SYSTEM

ACS ACCESS CONTROL SYSTEM

WB WHITE BOARD (CF/CI)

WALL TYPE

S WALL MOUNTED, MOTORIZED

PROJECTION SCREEN (CF/CI)

WINDOW TYPE

EWC ELECTRIC WATER COOLER, SEE

PLUMBING DRAWINGS

O M

1. SEE SHEET A-002 FOR WALL CONSTRUCTION

LEGEND.

2. PROVIDE GYPSUM WALLBOARD CONTROL JOINTS @

30'-0" OC MAX.

3. PROVIDE BLOCKING IN WALLS FOR CORNER

GUARDS, TV BRACKETS, TOILET ACCESSORIES, AND

OTHER WALL MOUNTED ITEMS.

4. REFER TO WALL SECTIONS AND PLAN DETAILS FOR

SPECIFIC WALL DIMENSIONS TO COLUMN LINE AND

EXISTING CONSTRUCTION.

5. PLAN DRAWINGS ARE GENERATED BY A CUT

THROUGH THE WALL AT A HEIGHT OF APPROXIMATELY

48”. COMPONENTS IN OR ON THE WALL ABOVE OR

BELOW THIS PLANE MAY NOT BE IDENTIFIED IN THIS

PLAN VIEW. SEE ELEVATION VIEWS FOR

IDENTIFICATION OF ALL WALL COMPONENTS AND

OPENINGS.

FLOOR PLAN NOTES

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

A-122

29 MAY 2020

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

A-122

1 SECOND FLOOR - NOTE PLAN

PLAN

NORTH

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

1255149268C Polygon

1255149268C

E-203

ACADEMIC

DIRECTOR

OFFICE

E-202

E-222

E-223

E-219

219B

E-220

E-221

E-214

VTC/COMM OBSERV. ROOM

240 232

CLASSROOM 1

SECURITY & IT

SUPPORT

233234

224A

224B

205A

225 226

3.7

2.7

2.9

D W

E F

+/- 6'-0"

88 SF

CONFERENCE

ROOM

CLASSROOM 2

CLASSROOM 3

MEN'S WOMEN'S

CORRIDOR

CORR.

STUDENT

BREAKROOM

SM OFFICE

OFFICE

MECHANICAL

ROOM

KITCHEN

CONFERENCE

ROOM

705 OPERATIONS /

OCTP

PTT LAB

COMMANDER

ROOM

DEPUTY

SENIOR MENTOR

505 TRG

705 TRS

EXISTING

MECHANICAL

ROOM

EXISTING ELEC

G H J K

9'-9" 21'-7" 17'-7"

11'-3" 17'-5" 6'-5"

'-6

6'-

'-5

5'- 5"

3'- 0"

6'-1" 3'-8" 5'-10"

3'- 8"

7'- 6"

5'-11" 3'-8" 6'-1"

3'- 8"

7'- 6"

'-2

1/ 4"

2'- 8"

'-4

6'- 0"

'-1

6'- 0"

5'-7" 15'-9"

6" CLEAR

1'- 2"

3'- 4"

'-6

'-3

1/ 2"

10'-10" 10'-2"

1'- 6"

1'- 0"

'-1

1'- 0"

SEE STRUCTURAL

DRAWINGS FOR

DIMENSIONS NOT SHOWN

HERE

3'- 0"

'-1

1 5 /8"

6'- 8"

'-3

8'-

0 5 /8"

(E)

14'-5" 11'-10" 10'-0" 7'-10" 16'-1 1/2"

1. REFER TO WALL SECTIONS AND PLAN DETAILS FOR

SPECIFIC WALL DIMENSIONS TO COLUMN GRID LINES AND

EXISTING CONSTRUCTION.

2. SEE SHEET A-004 WALL CONSTRUCTION LEGEND FOR

WALL TYPE DESCRIPTIONS.

3. ALL DIMENSIONS ARE FROM FACE OF CMU, FACE OF

STUD, OR WHERE APPLICABLE, COLUMN GRIDLINE.

4. FIELD VERIFY DIMENSIONS OF EXISTING AREAS WITH

NEW WORK PRIOR TO CONSTRUCTION

DIMENSION PLAN NOTES

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-123

29 MAY 2020

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

PLAN

NORTH

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

1/8" = 1'-0"

A-123

1 SECOND FLOOR - DIMENSION PLAN

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

E-202

E-203

205A

9'-0"

9'-0" 9'-0"

9'-0"

234238

224A

224B

9'-0"

A-502

A-605

8'-0"8'-0"

8'-0"

A-502

8'-0"

A-502

9'-0"

GRAPHIC LEGEND

2' X 2' SUSPENDED ACOUSTICAL TILE

LAY-IN CEILING WITH GRID

2 X 4 LED RECESSED LIGHTING

FIXTURE, SEE ELECTRICAL DRAWINGS

RECESSED LED LIGHTING FIXTURE,

SEE ELECTRICAL DRAWINGS

CEILING DIFFUSER, SEE

MECHANICAL DRAWINGS

RETURN AIR GRILLE, SEE

MECHANICAL DRAWINGS

EXIT LIGHT, SEE ELECTRICAL AND LIFE

SAFETY DRAWINGS FOR DIRECTIONAL

INFORMATION

CEILING HEIGHT

ROOM NUMBER DESIGNATION

SUSPENDED GYPSUM BOARD CEILING,

PAINTED - PROVIDE 5/8" THICK

GYPSUM BOARD

OPEN TO STRUCTURE ABOVE, PAINTED

CEILING MOUNTED ACCESS PANEL,

COORDINATE SIZE AND LOCATION

W/ MECHANICAL DRAWINGS

SURFACE MOUNTED LED LIGHTING

FIXTURE, SEE ELECTRICAL DRAWINGS

CEILING MOUNTED PROJECTOR, GF/GI,

COORDINATE W/ ELECTRICAL DRAWINGS

EXTERIOR WALL-MOUNTED LIGHT,

SEE ELECTRICAL DRAWINGS

REFLECTED CEILING

NOTES

1. ALL HEADERS ARE TO BE 6" BELOW LOWEST

ADJACENT CEILING UNLESS NOTED OTHERWISE.

2. PROVIDE MOISTURE RESISTANT GYPSUM WALL

BOARD IN TOILET ROOMS.

3. PROVIDE ACCESS PANELS IN GYPSUM BOARD

CEILING AT LOCATIONS REQUIRING MAINTENANCE

ACCESS TO PLUMBING, MECHANICAL, AND ELECTRICAL

COMPONENTS.

4. ALL FIRE SPRINKLER HEADS, ELECTRICAL FIXTURES

AND MECHANICAL VENTS SHALL BE CENTERED WITHIN

CEILING TILES UNLESS NOTED OTHERWISE.

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-151

29 MAY 2020

ILI

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

A-151

1 SECOND FLOOR - REFLECTED CEILING PLAN

PLAN

NORTH

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C

DOOR ELEVATIONS

INTERIOR / EXTERIOR

ALUMINUM

STOREFRONT

DOOR

(C)

SEE SCHED

SOLID CORE WOOD

(WD) DOOR

(E)

SEE SCHED

SOLID CORE WOOD

(WD) DOOR

(F)

6" 2'-

VISION PANEL

(AS SCHEDULED)

NOTE: SEE SCHEDULE FOR

GLAZING AND LOUVER OPENINGS

SEE SCHED

HOLLOW METAL

DOOR W/ ACOUSTIC

CORE

(A)

NOT USED

(D)

SEE SCHED

INSULATED HOLLOW

METAL (HM) DOOR

(B)

" M

SEE SCHED

MEDIUM STILE

ANODIZED

ALUMINUM

DOOR TO

MATCH

EXISTING

DOOR FRAME ELEVATIONS

HOLLOW METAL

(HM) FRAME

(2)

SEE SCHED

2" 2"

HOLLOW METAL

(HM)FRAME

(1)

SEE SCHED

2" 2"

ALUMINUM

FRAME

(3)

SEE SCHED

2" 2"

2" ANODIZED

ALUMINUM

STOREFRONT

TO MATCH

STOREFRONT

EXISTING AT

BUILDING

INSULATED LOW-E TINTED. LAMINATED GLASS,

ATFP/BLAST/HURRICANE IMPACT RESISTANT

1/4" TEMPERED GLASS, CLEAR

GLAZING LEGEND

SCHEDULE LEGEND

ENT/EX

IDS

ACS

CIPHER LOCK

ENTRANCE/ EXIT DOOR

EXIT DOOR ONLY

INTRUSION DETECTION SYSTEM

ACCESS CONTROL SYSTEM

INTERIOR WINDOW

ELEVATIONS

A-604

4'-0"

4'- 0"

3'- 0"

WORK SURFACE

PER PLANS

HOLLOW METAL FRAME

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

A-601

29 MAY 2020

JGH/MSH

RCR

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

DOOR SCHEDULE 1ST FLOOR

DOOR FRAME

STC

RATING

HARD

WARE

COMMENTSMARK

SIZE

MAT ELEV GLAZING

LOUVER

MAT ELEV

DETAIL

SET

NOWD HT THK WD HT HEAD JAMB SILL

141 3'-0" 7'-0" 1 3/4" AL C G1 AL 3 2/A-604 5/A-604 8/A-604 1

142 3'-0" 7'-0" 1 3/4" WD E HM 2 2/I-123 2 COORDINATE WITH SECURITY SYSTEM DETAILS IN ELECTRICAL DRAWINGS FOR ADDITIONAL INFORMATION

142A 3'-0" 7'-0" 1 3/4" HM B HM 1 2/A-603 4/A-603 5/A-603 3 COORDINATE WITH SECURITY SYSTEM DETAILS IN ELECTRICAL DRAWINGS FOR ADDITIONAL INFORMATION

143 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 4

144 8'-0" 7'-0" 1 3/4" HM B HM 1 1/A-604 4/A-604 7/A-604 5

145 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 2/I-123 6 UNDERCUT DOOR 1"

146 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 2/I-123 6 UNDERCUT DOOR 1"

147 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 7 UNDERCUT DOOR 1"

148 3'-0" 7'-0" 1 3/4" WD F 6 X 30 TG HM 2 3/A-602 6/A-602 8

149 3'-0" 7'-0" 1 3/4" WD F 6 X 30 TG HM 2 3/A-602 6/A-602 8

150 3'-0" 7'-0" 1 3/4" WD F 6 X 30 TG HM 2 3/A-602 6/A-602 8

DOOR SCHEDULE 2ND FLOOR

DOOR FRAME

STC

RATING

HARD

WARE

COMMENTSMARK

SIZE

MAT ELEV GLAZING

LOUVER

MAT ELEV

DETAIL

SET

NOWD HT THK WD HT HEAD JAMB SILL

201 EXISTING TO REMAIN. PROVIDE CONDUIT FROM EXISTING BMS TO RELOCATED IDS PANEL.

219 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

219B 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

224A 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 13

225 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 2/I-123 6 UNDERCUT DOOR 1"

226 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 2/I-123 6 UNDERCUT DOOR 1"

228 8'-0" 7'-0" 1 3/4" HM B HM 1 1/A-603 SIM 3/A-603 SIM 11

229 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

229A 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

230 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

231 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

232 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

233 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

233A 3'-0" 7'-0" 1 3/4" WD F HM 2 3/A-602 6/A-602 8

234 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

234A 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602

235A 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

235B 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 8

236 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 13

237 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 13

238 3'-0" 7'-0" 1 3/4" HM 1 1/A-603 3/A-603 2/I-123 9 COORDINATE WITH SECURITY SYSTEM DETAILS IN ELECTRICAL DRAWINGS FOR ADDITIONAL INFORMATION 240 3'-0" 7'-0" 1 3/4" HM B HM 1 2/A-603 4/A-603 6/A-603 3 COORDINATE WITH SECURITY SYSTEM DETAILS IN ELECTRICAL DRAWINGS FOR ADDITIONAL INFORMATION

241A 3'-0" 7'-0" 1 3/4" HM 2 7/A-602 2 COORDINATE WITH SECURITY SYSTEM DETAILS IN ELECTRICAL DRAWINGS FOR ADDITIONAL INFORMATION

241B 3'-0" 7'-0" 1 3/4" WD E HM 2 3/A-602 6/A-602 12

WINDOW SCHEDULE

MARK

SIZE

TYPE MATL FINISH HEAD JAMB SILL

GLAZING

HEAD

HEIGHT COMMENTSWIDTH HEIGHT THICKNESS TYPE

1 4'-0" 4'-0" Fixed HM 3/A-604 6/A-604 9/A-604 1/4" TG 7'-0"

100% SUBMITTAL

WD E

3/A-602 6/A-602

8/6 /20

1255149268C Line

1255149268C Polygon

1255149268C

SECURITY & IT

SUPPORT

CORR.

EXISTING

CORRIDOR

VTC/COMM

225 226

SM OFFICE

MECHANICAL

ROOM

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

2.1

2.2

2.5

2.7

2.9

2.8

3.3

3.7

3.8

3.2

3.9

3.85

D W

CONFERENCE

ROOM

CLASSROOM 1

CLASSROOM 2

CLASSROOM 3

MEN'S WOMEN'S

CORRIDOR

OBSERV. ROOM

CORR.

STUDENT

BREAKROOM

224A

OFFICE

219B

KITCHEN

224B

CONFERENCE

ROOM

705 OPERATIONS /

OCTP

ACADEMIC

DIRECTOR

OFFICE

E-202

PTT LAB

E-203

E-220

COMMANDER

ROOM

E-221

DEPUTY

E-222

SENIOR MENTOR

E-223

E-219

705 TRS

E-214

EXISTING

MECHANICAL

ROOM

EXISTING ELEC

205A

224A

PA1

PA1 MCT1

MCT1

RM1

MCT1

PA1

MCT1

MCT1MCT1MCT1

MCT1

MCT1MCT1

MCT1

PA1

MCT1

CG CG

CGCG

CG MCT1

MCT1

505 TRG

PA1

A-501

224A

E-200A

MCT2: MATCH

EXISTING MCT &

BASE AT CORRIDOR

TO FILL IN DOORWAY

RECESS.

MCT2: MATCH

EXISTING MCT &

BASE AT CORRIDOR

TO FILL IN DOORWAY

RECESS.

PATCH TO MATCH

EXISTING MCT &

BASE AT NEW WALL

GRAPHIC LEGEND

ROOM NAME

ROOM NAME / NUMBER

DESIGNATION

NEW WALL CONSTRUCTION

EXISTING WALL

CG CORNER GUARD

WALL TYPE

SIGNAGE

ROOM FINISH / COLOR

SCHEDULE KEY

NOTE: FINISHES INDICATED ARE THE APPROVED BASIS OF

DESIGN TO CONVEY PATTERN, TEXTURE AND SALIENT

CHARACTERISTICS ONLY. LISTING OF MANUFACTURER

INFORMATION IS NOT INTENDED TO LIMIT THE SELECTION OF

PRODUCTS PROVIDED BY ANOTHER MANUFACTURER.

TO BE DETERMINED NEXT SUBMITTAL

ACT - ACOUSTICAL CEILING TILE

CG - CORNER GUARD

CBB - CEMENTITIOUS BACKER BOARD

EX - EXISTING CONSTRUCTION

EXP - EXPOSED STRUCTURE

GR - GROUT

GWB - GYPSUM WALL BOARD

HB - HORIZONTAL BLINDS

IS - INTERIOR SIGNAGE

MCT - MODULAR CARPET TILE

MTR - METAL TRIM

MRGB - MOISTURE RESISTANT GYPSUM BOARD

PA - PORCELAIN TILE

PAB - PORCELAIN TILE BASE

PL - PLASTIC LAMINATE

PT - PAINT

RM - RESILIENT MATERIAL

SC - SEALED CONCRETE

SS - SOLID SURFACE

TBD -

WM - WALK OFF MAT TILE

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

I-121

29 MAY 2020

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

PLAN

NORTH

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

1/8" = 1'-0"

I-121

1 SECOND FLOOR - FINISH PLAN

100% SUBMITTAL

E-203E-202

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C

ACT - ACOUSTICAL CEILING TILE

1 - ARMSTRONG; CIRRUS HIGH NRC #556 ANGLED

TEGULAR, 24" X 24"; COLOR: WHITE; GRID:

PRELUDA ML EXPOSED TEE 15/16", COLOR: WHITE.

2 - ARMSTRONG KITCHEN ZONE, 673, SQUARE LAY-IN

SMOOTH TEXTURE, 24" X 24" X 5/8", WHITE. GRID:

15/16" PRELUDE WHITE.

CBB - CEMENTITIOUS BACKER BOARD

CG - CORNER GUARD

1 - ACROVYN 305 MUSHROOM

EX - EXISTING CONSTRUCTION

EXP - EXPOSED STRUCTURE

GR - GROUT

1 - USE FOR PA1 FLOOR TILE- LATICRETE 90 LIGHT

PEWTER

2- USE FOR PA2 WALL TILE- LATICRETE 60 DUSTY

GREY

GWB - GYPSUM WALL BOARD

HB- HORIZONTAL BLINDS

1 - LEVOLOR 113 WHITE CAP

IS - INTERIOR SIGNAGE

2/90 SIGN SYSTEM OR EQUAL: ARC ESSENTIALS;

SLIDE THIN RAIL; TYPOGRAPHY: HELVETICA;

FACE COLOR: PEARL GREY 233;

INSERT COLOR: ASH 711; TRIM: BLACK

MRWB - MOISTURE RESISTANT GYPSUM BOARD

ROOM FINISH / COLOR SCHEDULE KEY

MCT - MODULAR CARPET TILE

1 - SHAW CONTRACT: AGATE TILE 5T015,

COLOR: HEMATITE 14760; SIZE 18" X 36";

INSTALL METHOD: QUARTER TURN; USE OF ADHESIVE

TABS

2 - USE EXITING MODULAR CARPET TO FILL IN RECESSES AT

DOORWAYS. EXISTING CARPET IS A MANNINGTON CLOSE

KNIT II COLOR NASSAU

MTR - METAL TRIM

1 - SCHLUTER METAL TRIM, TRANSITIONS, ETC.

CLEAR ANODIZED FINISH

OP - OPERABLE PARTITION

1- KWIK WALL; MOVEABLE WALL SYSTEMS, STACKING

PANELS SERIES 3040. FINISH: KASHT VINYL;

COLOR: SKW-19 SILVER FAN

PA - PORCELAIN TILE

1 - DALTILE MODERNIST, COLORBODY PORCELAIN, COLOR:

SORIANO CLAY MD87, 24" X 24" X 5/8", INSTALLED WITH

GR1

2 - DALTILE UNITY, COLORBODY PORCELAIN, COLOR:

GRIGIO P402, POLISHED FINISH, 12" X 24", HORIZONTAL

STRAIGHT STACK INSTALLATION WITH GR2

PAB - PORCELAIN TILE BASE

1 - DALTILE MODERNIST, COLORBODY PORCELAIN, COLOR:

SORIANO CLAY MD85, BULLNOSE P-43F9, 3" X 24",

INSTALLED WITH GR1

2 - DALTILE UNITY, COLORBODY PORCELAIN, COLOR: G

RIGIO P402, POLISHED FINISH, 12" X 23", START

STRAIGHT STACK INSTALLATION OF WALL TILE WITH

FIRST ROW AT SURFACE OF FLOOR TILE. NO

SEPARATE WALL BASE TO BE USED

PL - PLASTIC LAMINATE

1 - WILSONART, 5TH AVE ELM, 7966K-12

PT - PAINT

1 - BENJAMIN MOORE CLASSIC COLORS, STONE HEARTH

984 EGG-SHELL FINISH

2 - BENJAMIN MOORE CLASSIC COLORS, STONE HEARTH

984, SEMI-GLOSS FINISH

3 - SHERWIN WILLIAMS, SW7757 HIGH REFLECTIVE WHITE,

FLAT FINISH

4 - BENJAMIN MOORE CLASSIC COLORS, SMOKEY TAUPE

983, SEMI-GLOSS FINISH

5 - MATCH EXISTING

RM - RESILIENT MATERIAL

1 - JOHNSONITE STATIC DISSIPATIVE VINYL, GRANIT SD,

COLOR: 726 SIDEWALK

2 - JOHNSONITE WALL BASE, RUBBER 4" COVE BASE,

COLOR: 80 FAWN

SC - SEALED CONCRETE

SS- SOLID SURFACE

1 - LIVINGSTONE SURFACES, COLOR: L716 ROCK SALT

2 - LIVINGSTONE SURFACES, COLOR: L215 CARBONITE

TP- TOILET PARTITIONS

1- SCRANTON PRODUCTS HINY HIDERS SOLID PLASTIC,

COLOR: NICKEL WITH HAMMERED FINISH

WM - WALK OFF TILE

1 - INTERFACE; STEP REPEAT SR799, COLOR: GRANITE 104935;

SIZE: 50CM X 50CM, INSTALL METHOD: QUARTER TURN;

USE OF ADHESIVE TABS

ACT - ACOUSTICAL CEILING TILE

CG - CORNER GUARD

CBB - CEMENTITIOUS BACKER BOARD

EX - EXISTING CONSTRUCTION

EXP - EXPOSED STRUCTURE

GR - GROUT

GWB - GYPSUM WALL BOARD

HB - HORIZONTAL BLINDS

IS - INTERIOR SIGNAGE

MCT - MODULAR CARPET TILE

MTR - METAL TRIM

ROOM FINISH / COLOR SCHEDULE KEY

MRGB - MOISTURE RESISTANT GYPSUM BOARD

PA - PORCELAIN TILE

PAB - PORCELAIN TILE BASE

PL - PLASTIC LAMINATE

PT - PAINT

RM - RESILIENT MATERIAL

SC - SEALED CONCRETE

SS- SOLID SURFACE

TBD - TO BE DETERMINED NEXT SUBMITTAL

WM - WALK OFF MAT TILE

NOTE: FINISHES INDICATED ARE THE APPROVED BASIS OF DESIGN TO CONVEY PATTERN, TEXTURE AND SALIENT CHARACTERISTICS ONLY. LISTING OF MANUFACTURER INFORMATION IS NOT INTENDED TO

LIMIT THE SELECTION OF PRODUCTS PROVIDED BY ANOTHER MANUFACTURER.

FINISH SCHEDULE REMARKS

1. CABINET COUNTERTOP TO BE SOLID SURFACE. CABINET BASE TO BE PLASTIC LAMINATE WITH PVC

MATCHING EDGE BANDING AT EXPOSED EDGES. INSIDE OF CABINET SHALL BE WHITE.

2. SOLID SURFACE COUNTERTOP TO HAVE SS1 APRON.

3. INSTALL MODULAR CARPET TILE, MCT1, IN QUARTER TURN PATTERN.

4. ALL NEW AND EXISTING HOLLOW METAL DOOR FRAMES TO BE PAINTED PT5, SHERWIN WILLIAMS

SW6108 LATTE. THESE AREAS ONLY IN THE EXISTING BUILDING.

5. EXISTING FINISHES TO REMAIN.

GENERAL NOTES

1. ALL FINISHES LISTED HERE ARE BASED ON "PLAN NORTH" AS INDICATED ON FLOOR PLANS.

2. REFER TO REFLECTED CEILING PLAN SHEET(S) A-150 FOR CEILING HEIGHTS.

3. REFER TO SHEET 1-120 AND I-121 FOR EXTENT OF FLOOR FINISHES IN ADDITION TO ROOM

FINISH/COLORSCHEDULE.

4. ROOMS WITHOUT NUMBERS RECEIVE NO NEW WORK.

5. UNLESS SPECIFICALLY NOTED IN AREAS WITH EXISTING PAINT OR FRAMES, ALL INTERIOR HOLLOW

METAL DOOR FRAMES SHALL BE PAINTED PT2, SEMI-GLOSS FINISH.

6. ALL ELECTRICAL SWITCHES, RECEPTACLES, VOICE AND DATA PLATES SHALL BE COLOR TO MATCH

THOSE IN EXISTING BUILDING.

7. INSTALL PA1 AND MCT FLOOR FINISH MATERIAL WITH SCHLUTER SYSTEM (OR EQUAL) METALEDGE TRIM AT JUNCTURE OF DISSIMILAR MATERIALS; I.E. PORCELAIN PAVER AND MODULARCARPET TILE.

8. ALL EXPOSED STRUCTURE SHALL BE PAINTED PT2.

9. ALL GYPSUM BOARD CEILINGS SHALL BE PAINTED PT3.

10. CORNER GUARDS SHALL EXTEND FROM TOP OF WALL BASE TO CEILING. PROVIDE CORNER GUARDS

ON ALL OUTSIDE EDGE CORNERS.

11. WOOD DOORS - MATCH NEW WOOD DOORS TO EXISTING WOOD DOORS IN WOOD TYPE, COLORAND

FINISH.

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

I-122

29 MAY 2020

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

ROOM FINISH SCHEDULE - PLAN NORTH

ROOM

NO.

ROOM NAME

FLOOR BASE WALLS MILLWORK CEILING

REMARKSMAT FIN MAT FIN

NORTH EAST SOUTH WEST

MAT COLOR MAT COLORMAT FIN COLOR MAT FIN COLOR MAT FIN COLOR MAT FIN COLOR

141 CORRIDOR PA 1 PAB 1 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1

142 CORRIDOR MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT /

GWB

1 / PT3 3

143 OBSERV. ROOM MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

144 MECHANICAL ROOM SC - RM 2 CMU PT 2 GWB PT 2 GWB PT 2 CMU PT 2 EX PT2

145 MEN'S PA 1 PAB 2 CBB PA 2 CBB PA 2 CBB PA 2 CBB PA 2 SS/SS 1/1 MRGB PT3 2

146 WOMEN'S PA 1 PAB 2 CBB PA 2 CBB PA 2 CBB PA 2 CBB PA 2 SS/SS 1/1 MRGB PT3 2

147 JAN. PA 1 PAB 1 GWB PT 2 GWB PT 2 GWB PT 2 GWB PT 2 MRGB PT3

148 LAB MCT 1 RM 2 GWB PT 1 OP 1 OP 1 GWB PT 1 GWB PT 1 ACT 1 3

149 LAB MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 OP 1 OP 1 ACT 1 3

150 CLASSROOM MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

201 705 OPERATIONS / OCTP EX/MCT 1 RM 2 GWB PT 1 EX EX EX EX

205 EXISTING MECHANICAL ROOM - - - - - - - - - - - - - - - - - - 5

205A EXISTING ELEC - - - - - - - - - - - - - - - - - - 5

219B OFFICE MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3,4

224A STUDENT BREAKROOM PA 1 PAB 1 GWB PT 4 GWB PT 4 GWB PT 4 GWB PT 4 ACT 1

224B KITCHEN PA 1 PAB 1 GWB PT 4 GWB PT 4 GWB PT 4 GWB PT 4 SS/PL 2/1 ACT 2 1

225 MEN'S PA 1 PAB 1 CBB PA 2 CBB PA 2 CBB PA 2 CBB PA 2 SS/SS 1/1 MRGB PT3 2

226 WOMEN'S PA 1 PAB 1 CBB PA 2 CBB PA 2 CBB PA 2 CBB PA 2 SS/SS 1/1 MRGB PT3 2

228 MECHANICAL ROOM SC - RM 2 EX PT 2 GWB PT 2 GWB PT 2 EX PT 2 EX PT2

229 SM OFFICE MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

230 CONFERENCE ROOM MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

231 CLASSROOM 2 MCT 1 RM 2 GWB PT 1 GWB PT 1 OP 1 OP 1 GWB PT 1 ACT 1 3

232 CLASSROOM 3 MCT 1 RM 2 OP 1 OP 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

233 CLASSROOM 1 MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

234 SECURITY & IT SUPPORT MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

235 CONFERENCE ROOM MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

236 VTC/COMM RM 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

237 OBSERV. ROOM MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 SS/PL ACT 1 3

238 CORR. MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

239 CORR. MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

240 CORR. MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

241 CORRIDOR MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3

E-200A EXISTING CORRIDOR - - - - - - - GWB PT 5 - - - - - -

E-202 ACADEMIC DIRECTOR OFFICE

E-203 PTT LAB

E-214 705 TRS - - - - - - - - - - - - - - - - 5

E-219 505 TRG MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3,4

E-220 RA - - - - - - - - - - - - - - - - - - 5

E-221 COMMANDER ROOM - - - - - - - - - - - - - - - - - - 5

E-222 DEPUTY - - - - - - - - - - - - - - - - - - 5

E-223 SENIOR MENTOR - - - - - - - - - - - - - - - - - - 5

E-219B OFFICE MCT 1 RM 2 GWB PT 1 GWB PT 1 GWB PT 1 GWB PT 1 ACT 1 3,4

100% SUBMITTAL

8/6 /20

1255149268C Line

1255149268C Polygon

1255149268C

9" MIN

5'- 0"

PROVIDE ADA COMPLIANT

SCHLUTER RENO-U OR

RENO-V OR EQUAL METAL

TRANSITION STRIP BETWEEN

TILE AND CARPET

3/8" PORCELAIN TILE

MEDIUM MORTAR TILE

SETTING BED MODULAR CARPET TILE

1/2

REPLACEABLE PRINTED

DESCRIPTION

USE FOR OFFICES AND ROOMS. SIGNS WILL

HAVE ROOM NUMBERS, BRAILLE, AND TWO

CHANGEABLE MESSAGE SLOTS.

1 1/2" TACTILE ROOM NUMBER WITH

GRADE 2 BRAILLE

2" 2"

END CAPS

WINDOW WITH PRINTED PAPER

INSERT

USE FOR TOILETS WITH GENDER NAMES,

GENDER SYMBOLS, AND ADA AND AIGA

SYMBOLS. INCLUDE ROOM NAME AND

BRAILLE. SEE DETAIL 1 FOR MOUNTING.

TOILET

8 1/2"

8 1 /2"

USE FOR ALL PERMANENT BUILDING SERVICE

SPACES. SIGNS WILL HAVE ROOM NUMBERS,

ROOM NAMES AND BRAILLE.

SIGN 144 TO BE EXTERIOR GRADE MATERIALS.

MECHANICAL

1 1/2" TACTILE ROOM NUMBER

WITH GRADE 2 BRAILLE

3/4" TACTILE ROOM DESCRIPTION

WITH GRADE 2 BRAILLE

END CAPS

VACANT

SIGN WITH ROOM NAME, NUMBER,

BRAILLE AND TWO SLIDERS.

SLIDER: VACANT/OCCUPIED

CONFERENCE

OCCUPIED

1 1/2" TACTILE ROOM NUMBERS

WITH GRADE 2 BRAILLE

5/8" TACTILE ROOM NAME

SLIDER

END CAPS

2" 2"

SIGNAGE COLOR KEY

BASIS OF DESIGN: SYSTEMS 2/90 -

ARC ESSENTIALS

FACE MATERIAL: ASH 711

RAISED COPY: PEARL GREY 233

METAL ACCENT BAR: BLACK

TEXT STYLE: HELVETICA

1'- 6"

EXTERIOR BUILDING ENTRANCE SIGN. USER TO CONFIRM TEXT

INCLUDING EXACT NAME, ADDRESS, AND BUILDING NUMBER AS

REQUIRED. EXTERIOR GRADE MATERIALS.

505th CCW

XXXXX

BUILDING 90021

XXXXX

1'-6"

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

I-123

29 MAY 2020

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

3/4" = 1'-0"

I-123

1 SIGN MOUNTING- TYPICAL

3" = 1'-0"

I-123

2 ADA TRANSITION TILE DETAIL

3" = 1'-0"

I-123

3 SIGN TYPE A

3" = 1'-0"

I-123

4 SIGN TYPE B

3" = 1'-0"

I-123

5 SIGN TYPE C

INTERIOR SIGNAGE SCHEDULE

MARK ROOM NAME TYPE SIGN MOUNT LOCATION

141 ENTRANCE SIGN TYPE E WALL

142 CORRIDOR TYPE A WALL

143 OBSERV. ROOM TYPE C WALL

144 MECHANICAL ROOM TYPE C WALL

145 MEN'S TYPE B WALL

146 WOMEN'S TYPE B WALL

147 JAN. TYPE C WALL

148 LAB TYPE A WALL

149 LAB TYPE A WALL

150 CLASSROOM TYPE A WALL

201 705 OPERATIONS / OCTP TYPE A WALL

201 NO ENTRY TYPE C WALL

219B OFFICE TYPE A WALL

224A STUDENT BREAKROOM TYPE A WALL (2 EACH)

225 MEN'S TYPE B WALL

226 WOMEN'S TYPE B WALL

228 MECHANICAL ROOM TYPE C WALL

229 SM OFFICE TYPE A WALL

230 CONFERENCE ROOM TYPE D WALL

231 CLASSROOM 2 TYPE A WALL

232 CLASSROOM 3 TYPE A WALL

233 CLASSROOM 1 TYPE A WALL

234 SECURITY & IT SUPPORT TYPE A WALL

235 CONFERENCE ROOM TYPE A WALL

236 VTC/COMM TYPE A WALL

237 OBSERV. ROOM TYPE A WALL

239 TYPE A WALL

241 NO ENTRY TYPE C WALL

E-202 ACADEMIC DIRECTOR OFFICE TYPE A WALL

E-203 PTT LAB TYPE A WALL

E-214 705 TRS TYPE A WALL

E-219 505 TRG TYPE A WALL

SCALE: 3/4" = 1'-0"

0 8" 1'-4" 2'-8"

SCALE: 3" = 1'-0"

0 2" 4" 8"

3" = 1'-0"

I-123

6 SIGN TYPE D

3" = 1'-0"

I-123

7 SIGN TYPE E

100% SUBMITTAL

8/6 /20

1255149268C Polygon

1255149268C Line

1255149268C Polygon

1255149268C

MODIFY WET PIPE SPRINKLER SYSTEM IN ACCORDANCE

WITH NFPA 13, UFC 3-600-01, 8 AUGUST 2016 WITH

CHANGE 1, 25 NOVEMBER 2016, THE SPECIFICATIONS,

THE AUTHORITY HAVING JURISDICTION, AND TO

ACCOMODATE NEW FLOOR PLAN.

MECHANICAL

ROOM

SM OFFICE

CONFERENCE

ROOM

CLASSROOM 2

CLASSROOM 3

CORR.

CLASSROOM 1

SECURITY & IT

SUPPORT

CORR.

CONFERENCE

ROOM

OBSERV. ROOM

VTC/COMM

705 OPERATIONS /

OCTP

STUDENT

BREAKROOM

224A

KITCHEN

224B

EXISTING

MECHANICAL

ROOM

MEN'S

WOMEN'S

ACADEMIC

DIRECTOR

OFFICE

E-202

PTT LAB

E-203

PROVIDE COMPLETE WORKING WET PIPE SPRINKLER

SYSTEM IN ACCORDANCE WITH NFPA 13, UFC 3-600-01,

8 AUGUST 2016 WITH CHANGE 1, 25 NOVEMBER 2016,

THE SPECIFICATIONS, AND THE AUTHORITY HAVING

JURISDICTION.

CORRIDOR

OFFICE

219B

505 TRG

E-219

SCALE: 1/8"=1'-0"

8' 8' 16'0'

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

FP-104

29 MAY 2020

- F

. N

GDP

F.BRADLEY

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

SECOND FLOOR PLAN - FIRE PROTECTION NEW WORK

SHEET NOTES

ROUTE OVERHEAD WET SPRINKLER PIPING SYSTEM IN

MECHANICAL ROOM.

SPRINKLER PIPING AND HEADS SHALL BE MODIFIED AS REQUIRED

PER ARCHITECTURAL NEW FLOOR PLAN.

LIGHT HAZARD.

ORDINARY HAZARD.

NOT USED.

NEW STOVE TOP HOOD. FIRE SUPPRESSION IS NOT REQUIRED IN

KITCHEN HOOD PER UFC 3-600-01 8 AUGUST 2016 CHANGE 1, 28

NOVEMBER 2016 SECTION 4-15.2.2.1 RESIDENTIAL RANGE TOP

EXTINGUISHING SYSTEMS ARE NOT REQUIRED IN SPRINKLERED

AREAS.

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text x ø

10"ø x

ATU

2.13

10"ø ø ø x x x ø ø

18"/16"

10"ø

12"ø

16"ø

12"ø

2.10

ATU

2.10

2.12

ATU

2.12

EX.AHU

CVR

2.6

ATU

2.6

2.4

ATU

2.4

2.13

TYP.

EX.FD

SCALE: 1/8"=1'-0"

8' 8' 16'0'

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

M-101

100% SUBMITTAL

29 MAY 2020

- H

BEJ

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

SECOND FLOOR PLAN - HVAC DEMO

SHEET NOTES

STORE DIFFUSER FOR RELCATION & EXTEND FLEX DUCT AS

REQUIRED. REFER TO NEW WORK PLAN.

DEMO EXISTING FLEX AND DUCTWORK. STORE DIFFUSER FOR

RELCATION. REFER TO NEW WORK PLAN.

DEMO EXISTING FLEX AND DIFFUSER.

DEMO DUCTWORK, FLEX, AND DIFFUSERS AS INDICATED.

DEMO EXISTING AHU-3 & CVR-3 IN ITS ENTIRETY. INCLUDING

LOUVERS, CONTROLS, DUCTWORK & DUCTWORK ACCESSORIES,

CHILLED/HOT WATER PIPING AND ACCESSORIES.

RELOCATE EXISTING THERMSOTAT. REFER TO NEW WORK PLAN

FOR LOCATION.

RELOCATE EXISTING 22"x22" TG, CONNECT TO 22"x22"

INTERNALLY LINED TRANSFER DUCT. REFER TO NEW WORK PLAN

FOR ORIENTATION.

EXISTING 6"x6" TRANSFER DUCT SHALL REMAIN. MODIFY

TRANSFER DUCT TO ACCOMADATE NEW WORK.

DEMO CHILLED / HOT WATER PIPE AS INDICATED. CAP HOT WATER.

EXISITNG SECURITY PENETRATION SHALL REMAIN AS INDICATED.

RELOCATE EXISTING Z-DUCT. REFER TO NEW WORK FOR

LOCATION.

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

2.1

2.2

2.5

2.7

2.8

3.2

3.3

3.7

3.8

3.9

FE G H J KDC.6C.4CB.9B.7B.6B.5BA

D W

KITCHEN

224B

STUDENT

BREAKROOM

224A

EXISTING

MECHANICAL

ROOM

EXISTING ELEC

205A

MEN'S

WOMEN'S

MECHANICAL

ROOM

CONFERENCE

ROOM

CLASSROOM 2

CLASSROOM 3

CLASSROOM 1

SECURITY & IT

SUPPORT

CORR.

CONFERENCE

ROOM

OBSERV. ROOM

VTC/COMM

705 OPERATIONS /

OCTP

ACADEMIC

DIRECTOR

OFFICE

E-202

PTT LAB

E-203

CD 8"ø

150 CFM

TYP. OF 2

CD 6"ø

100 CFM

10"x10"

ATU

2.10 x

6"ø

2.10

8"x 6"

150 CFM

12"x12"

8"x6" x

T 2.12

ATU

2.12 x

8"ø

8"ø x x

14"x14"

ATU

2.4

2.6 x x x

ATU

2.6

CD 6"ø

90 CFM

CD 8"ø

130 CFM

8"x 6"

150 CFM

SWS

10"ø ø ø ø

16"ø

10"ø ø ø

18"/16"

10"ø

12"ø

16"ø

12"ø

10"x10"

8"x8"

8"x 8"

150 CFM

EAG

10"x 10"

300 CFM

EAG

ATU

2.13

AHU

CD 6"ø

90 CFM

6"ø

RAG 6"x 6"

CD 8"ø

160 CFM

TYP. OF 2

10"x10" x

CD 6"ø

100 CFM

TYP. OF 4

CD 6"ø

90 CFM

CD 8"ø

120 CFM

10"x10" x

CD 8"ø

105 CFM

TYP. OF 4

CD 8"ø

110 CFM

TYP. OF 4

10"ø

10"ø ø ø

CD 6"ø

60 CFM

230 CFM

TYP. OF 8

8"ø

6"ø x

18"x18" ø ø

ATU

4.1 ø

ATU

4.2 ø

ATU

4.3

ATU

4.4

12"ø

ATU

4.5

ATU

4.6

16"ø

C D ø

F M

CD 6"ø

100 CFM

CD 8"ø

120 CFM

TYP. OF 2

ATU

4.7

RAG12"x 12" RAG12"x 12"

RAG12"x 12"

RAG10"x 10"

14"x12"

RAG12"x 12"

RAG10"x 10"

RAG22"x 22"

TYP. OF 2

RAG 6"x 6" x

RAG 6"x 6" x x

36"x14" 36"x16"

4.2

T 4.1

10"x10"

4.3

4.4

4.5

4.6

4.7

12"x12" x

CD 8"ø

160 CFM

TYP. OF 5

ø ø

8"ø

ATU

2.14

2.14 x

CORRIDOR

OFFICE

219B

505 TRG

E-219

STAIR

E-220

6"ø

CD 6"ø

30 CFM

PROVIDE 18"x6" EXHAUST WALL LOUVER

EQUAL TO GREENHECK MODEL# WL-16x6.

MAINTAIN 10’-0” FROM INTAKE LOUVER.

CD 8"ø

200 CFM

ø x

6"x6"

12"x6" x

M-301

LOCATION OF

EMERGENCY AIR

DISTRIBUTION

SHUTOFF SWITCH.

ø C

H W

S ø C

H W

3"øCHWS

3"øCHWR

C D ø

8"x8"

EX.FD

SCALE: 1/8"=1'-0"

8' 8' 16'0'

SHEET REFERENCE:

SHEET NUMBER:

, F

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

90021

OF RC

SPE

R L O

ATI

M M

M-103

29 MAY 2020

- H

BEJ

CP1017959

C O

N S

T R

U C

L O

O R

U I L D

I N

1/8" = 1'-0"

SECOND FLOOR PLAN - HVAC NEW WORK

SHEET NOTES

ROUTE 2-1/2" CHWS/R TO AHU-4

ROUTE 2-1/2" CHWS/R DOWN IN WALL SPACE TO AHU-3, REFER TO

M-102 FOR CONTINUATION.

CONTRACTOR TO PROVIDE RANGE HOOD EQUAL TO GREENHECK

MODEL GRRS. PROVIDE MANUFACTURER INLINE EXHUAST FAN AND

ROUTE 10" DUCT UP TO ROOF WITH ROOF CAP. REFER TO

GENERAL NOTES FOR DCUTWORK & DETAIL 5/M-502.

CLEAN ALL SYSTEM STRAINERS AND TREAT WATER AFTER

COMPLETION OF WORK.

EXISTING SECURITY PENETRATION SHALL REMAIN.

RELOCATED Z-DUCT WITH EXISTING SECURITY PENETRATION

ACCESSORIES.

NOT USED.

PROVIDE ACCESS PANEL IN HARD CEILING MINIMUM 18"x18".

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

SECOND FLOOR LIGHTING PLAN

CP1017959

JPM

JIK

, F

90021

OF RC

SPE

R L O

ATI

C O

N S

T R

U C

L O

O R

U I L D

I N

29 MAY 2020

SHEET REFERENCE:

SHEET NUMBER:

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

88OF

NORTH

E-102 1/8" = 1'-0"

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

E-102

2.1

2.2

2.5

2.8

3.2

2.7

3.9

3.7

3.8

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

3.3 os os os ds os rc ds os rc os rc ds ds ds os os ds osos rc

GENERAL NOTES

1. ALL FIXTURES SHALL BE MARK L24 UNLESS NOTED OTHERWISE

2. ALL FIXTURES IN ROOMS 238,239,240,241,E202,E203 SHALL BE MARK L22

FI FI

LALA

RH ds

RH RH

ds rc ds

RH RH

RHRH(2)

NO.

E202 E203 205A E214 E219 219B 224A 224B

NAME

705 OPERATIONS/OCTP

ACADEMIC DIRECTOR OFFICE

PTT LAB

EXISTING MECHANICAL ROOM

EXISTING ELECTRICAL

EXISTING 705 TRS

505 TRG

OFFICE

STUDENT BREAKROOM

KITCHEN

2ND FLOOR ROOM SCHEDULE

225 MEN'S

226 WOMEN'S

228 MECHANICAL ROOM

229 SM OFFICE

230 CONFERENCE ROOM

231 CLASSROOM 2

232 CLASSROOM 3

233 CLASSROOM 1

234 SECURITY & IT SUPPORT

235 CONFERENCE ROOM

236 VTC/COMM

237 OBSERVATION ROOM

238 CORRIDOR

239 CORRIDOR

240 CORRIDOR

241 CORRIDOR

205A

224A 224B

229 230

233234238

E203E202

E219

219B

E214

pp pp

os rc rc os os os os os osrc ds ds

NEW 120/208V PANEL L2B

EXISTING 120/208V PANEL L2A

EXISTING 480/277V PANEL H2 H2-31

31 31

H2A-2

2 2 2 2

2 2 2

2 2 2 2

22 2 2 2 2

222222

H2A-4

44 4

4 4

4 4 ds rc os ds

KEY NOTES

FIXTURES IN ROOMS 224A AND 201 ARE EXISTING RELOCATED FROM EXISTING OFFICE AREA.1

rc os

(1) (1) (1) (1) (1) (1)

(2) (2) (2) (2)

(1) (1) (1) (1) (1) (1)

3. ALL FIXTURES IN ROOMS 224A AND 201 ARE EXISTING RELOCATED FROM THE EXISTING OFFICE AREA DEMOLITION PLAN.

INDICATES LIGHTING CONTROL ZONE 1 (TYPICAL)

INDICATES LIGHTING CONTROL ZONE 2 (TYPICAL)

SEE ARCHITECTURAL ELEVATION

FOR WB FIXTURE MOUNTING HEIGHTS

(TYPICAL UNLESS NOTED OTHERWISE)

ADD 1-20/1 C.B. (18,000 AIC)

FOR NEW CIRCUIT 31.

NEW 120/208V PANEL L2D

4. SEESHEET E-109 FOR EMERGENCY LIGHTING RISER DIAGRAM.

5. SEE SHEET E-001 FOR TYPICAL LIGHTING CONTROLS.

PROVIDE INTEGRAL EMERGENCY LIGHTING UNIT BATTERY PACKS IN THESE FIXTURES.

NEW CENTRAL EMERGENCY BATTERY UNIT (SERVES ROOMS 225, 226, 224A ONLY.

DOWN TO FIXTURE BELOW (TYPICAL)

ds rc os ds rc os

NEW CENTRAL EMERGENCY BATTERY UNIT (SERVES ALL ROOMS ON 2ND FLOOR

RENOVATED AREA EXCEPT ROOMS 225, 226, 224A AND E219)

NEW PANEL L2C

NEW PANEL H2A

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

AutoCAD SHX Text S

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

AutoCAD SHX Text

III

1255149268C Polygon

1255149268C Typewritten Text

2.1

2.2

2.5

2.8

3.3

3.9

3.7

3.8

3.2

2.7

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

SECOND FLOOR POWER PLAN

CP1017959

JPM

JIK

, F

90021

OF RC

SPE

R L O

ATI

C O

N S

T R

U C

L O

O R

U I L

D I N

29 MAY 2020

SHEET REFERENCE:

SHEET NUMBER:

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

88OF

NORTH

E-104 1/8" = 1'-0"

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

E-104

G G

EXISTING 120/208V PANEL L2B.

EXISTING 120/208V PANEL L2A (ADD 1-100/3 FOR NEW

EXISTING 480/277V PANEL H2. ADD 100/3 C.B. FOR FEEDER

EXISTING 112.5 KVA DRY TYPE TRANSFORMER

205A

224A

224B

229 230

E203 E202

E219

219B

E214

NO.

E202 E203 205A E214 E219 219B 224A 224B

NAME

705 OPERATIONS/OCTP

ACADEMIC DIRECTOR OFFICE

PTT LAB

EXISTING MECHANICAL ROOM

EXISTING ELECTRICAL

EXISTING 705 TRS

505 TRG

OFFICE

STUDENT BREAKROOM

KITCHEN

2ND FLOOR ROOM SCHEDULE

225 MEN'S

226 WOMEN'S

228 MECHANICAL ROOM

229 SM OFFICE

230 CONFERENCE ROOM

231 CLASSROOM 2

232 CLASSROOM 3

233 CLASSROOM 1

234 SECURITY & IT SUPPORT

235 CONFERENCE ROOM

236 VTC/COMM

237 OBSERVATION ROOM

238 CORRIDOR

239 CORRIDOR

240 CORRIDOR

241 CORRIDOR

AHU-4

ATU 4.1 AT

4.2

4.6

4.5

ATU 4.3

ATU 4.4

ATU 4.7

ATU 2.4

ATU 2.6

ATU 2.12

ATU 2.14

J CONNECT

TO HOOD

L2D-1

L2D-5

L2D-12

L2D-14/16

L2D-4

(DISHWASHER) L2D-6 L2D-13

NEW PANEL L2C

L2C-35

L2C-37

L2C-2

L2C-20

L2C-14

L2C-16

L2C-12

L2C-10

L2C-4

L2C-6

L2C-18

L2C-22

1 L2C-28

L2C-30

KEY NOTES

PROVIDE 120V CIRCUIT FOR IDS CONTROL PANEL

NOT USED

PROVIDE 120V CIRCUIT FOR CLOSED CIRCUIT TV MONITOR STATION

L2C-24

H2-20/1

H2A-13 2#8, 1#10

GRD, 3/4"C

H2A-11 H2A-9

H2A-7

H2A-5

H2A-1 H2A-3

35 35 35 35

18 18

5 5

4 13

TO H2A (SEE RISER) AND ADD 1-20/3 C.B. FOR AHU-4 (ALL

FEEDER TO NEW PANEL L2C (SEE RISER) ADD 1-50/2

H2-20/3 ROUTE CIRCUIT THRU VFD

INDICATES SCREEN

CONTROLLER (TYPICAL)

NOT USED4

NEW PANEL H2A

SECOND FLOOR

EMERGENCY LIGHTING

CENTRAL BATTERY UNIT

G L2D-3

CIRCUIT BREAKER FOR ELECTRIC

PROVIDE 120V CONNECTION FOR DOORALARM POWER SUPPLY5

3#8, 1#10 GRD, 3/4"C

L2D-10

(DISPOSER) L2D-8

L2D-2

G 11 L2D-11 L2D-9 L2D-7

G G G

ELECTRIC WATER HEATER BELOW COUNTER. CONNECT TO CIRCUIT6

L2D-15/17, 2#10, 1#10 GRD, 1/2"C. PROVIDE 30/2 TOGGLE SWITCH

DISCONNECT AT WATER HEATER.

GENERAL NOTES

1. SEE GENERAL NOTES 1 AND 2 ON SHEET E-001 FOR SECURE AREA

PENETRATION REQUIREMENTS.

JL2D-197

PROVIDE 120V CIRCUIT FOR SENSOR VALVE POWER SUPPLIES.

COORDINATE WITH PLUMBING CONTRACTOR.

TL2D

NEW PANEL L2D NEW DRY TYPE

TRANSFORMER

SUSPENDED FROM

STRUCTURE. SEE

RISER DIAGRAM.

EF-2

L2D-20

L2D-18 ~

COORDINATE OUTLET LOCATIONS AND SYSTEM FURNITURE ROUGH-IN

WITH CONTRACTING OFFICER. (FURNITURE IS GFGI)

2. ATU 2.4, 2.6, 2.12 AND 2.10 REQUIRE 120V CIRCUIT FOR CONTROL

TRANSFORMER. ALL OTHER ATU'S HAVE ELECTRIC HEAT AND

REQUIRE A 277V CIRCUIT (UNITS WITH ELECTRIC HEAT HAVE

SELF-CONTAINED DISCONNECTS)

CONNECT TO TEMP. CONTROL PANEL. SEE MECHANICAL.9

SEE MECHANICAL

BREAKERS 25,000 AIC) SEE LIGHTING PANEL FOR ADDITIONAL

NEW C IRCUITS. ADD 1-20/1 C.B. FOR CIRCUIT TO ATU 2.14.

JSF

L2C-13

L2C-29

L2C-31

L2C-25

L2C-27

L2C-21

L2C-23

L2C-15

L2C-17

JSF

L2C-9

L2C-3

L2C-7

L2C-11

J SF L2C-5

JSF

L2C-19

J SF

L2C-33

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

AutoCAD SHX Text

III

AutoCAD SHX Text S

1255149268C Polygon

1255149268C Typewritten Text

SECOND FLOOR FIRE ALARM/MASS NOTIFICATION PLAN

JPM

JIK

, F

90021

OF RC

SPE

R L O

ATI

C O

N S

T R

U C

L O

O R

U I L D

I N

29 MAY 2020

SHEET REFERENCE:

SHEET NUMBER:

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

88OF

NORTH

E-106 1/8" = 1'-0"

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

E-106

2.1

2.2

2.5

2.8

3.3

3.9

3.7

3.8

3.2

2.7

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

FM FM

FMFM

FM FM

NOTE

SEE SHEET E-105 FOR LEGEND

205A

224A

224B

229 230

233234238

E203

E202

E219

219B

E214

NO.

E202 E203 205A E214 E219 219B 224A 224B

NAME

705 OPERATIONS/OCTP

ACADEMIC DIRECTOR OFFICE

PTT LAB

EXISTING MECHANICAL ROOM

EXISTING ELECTRICAL

EXISTING 705 TRS

505 TRG

OFFICE

STUDENT BREAKROOM

KITCHEN

2ND FLOOR ROOM SCHEDULE

225 MEN'S

226 WOMEN'S

228 MECHANICAL ROOM

229 SM OFFICE

230 CONFERENCE ROOM

231 CLASSROOM 2

232 CLASSROOM 3

233 CLASSROOM 1

234 SECURITY & IT SUPPORT

235 CONFERENCE ROOM

236 VTC/COMM

237 OBSERVATION ROOM

238 CORRIDOR

239 CORRIDOR

240 CORRIDOR

241 CORRIDOR

MASS NOTIFICATION

LOCAL OPERATING

S D R

CONSOLE

100% SUBMITTAL

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

SECOND FLOOR TELECOMMUNICATIONS PLAN

JPM

JIK

, F

90021

OF RC

SPE

R L O

ATI

C O

N S

T R

U C

L O

O R

U I L D

I N

29 MAY 2020

SHEET REFERENCE:

SHEET NUMBER:

PROJECT NUMBER:

BUILDING NUMBER:

DRAWN BY:

DATE:

88OF

NORTH

T-102 1/8" = 1'-0"

SCALE: 1/8" = 1'-0"

0 4' 8' 16'

T-102

2.1

2.2

2.5

2.8

3.3

3.9

3.7

3.8

3.2

2.7

A B B.5 B.6 B.9 C C.4 C.6 E FDB.7 G H J K

N2 S

N4 S2N2

N2 S

N4 S2

N4 S2N2 S

N S

205A

225 226

224A

224B

228 229

233234238

E203

E202

E219

219B

E214

NO.

E202 E203 205A E214 E219 219B 224A 224B

NAME

705 OPERATIONS/OCTP

ACADEMIC DIRECTOR OFFICE

PTT LAB

EXISTING MECHANICAL ROOM

EXISTING ELECTRICAL

EXISTING 705 TRS

505 TRG

OFFICE

STUDENT BREAKROOM

KITCHEN

2ND FLOOR ROOM SCHEDULE

225 MEN'S

226 WOMEN'S

227 JANITOR

228 MECHANICAL ROOM

229 SM OFFICE

230 CONFERENCE ROOM

231 CLASSROOM 2

232 CLASSROOM 3

233 CLASSROOM 1

234 SECURITY & IT SUPPORT

235 CONFERENCE ROOM

236 VTC/COMM

237 OBSERVATION ROOM

238 CORRIDOR

239 CORRIDOR

240 CORRIDOR

241 CORRIDOR

NIPR COMM

EXISTING

ROOM

16" X 2" CABLE TRAY

12" X 2" CABLE TRAY

16" X 3" CABLE TRAY

2-4" CONDUITS FOR NIPR/TELE CABLES

EXISTING NIPR

COMM RACKS

SIPR NETWORK CABINET

KEY NOTES

CABINETS ARE EXISTING.

CONTRACTOR TO PROVIDE PATCH PANELS.

CONTRACTOR SHALL FURNISH AND INSTALL NEW PATCH PANELS IN

EXISTING RACKS FOR NIPR/TELE CABLES.

PROVIDE NIPRNET CONNECTIONS FOR SIPRNET CABINETS

N2 SN2 S

FOR SIPRNET

PROVIDE NIPRNET

CONNECTION AT

IDS PANEL

FOR SIPRNET

SEAL ENDS OF CONDUITS AFTER CABLE INSTALLATION.4

FOR SIPRNET

N4 S2 N4 S2 N4 S2 N4 S2 N4 S2 N4 S2

S2 N4

N4 S2 N4 S2

N4 S2

GENERAL NOTE

100% SUBMITTAL

RELOCATE

EXISTING IDS

EXISTING IDS PANEL

PANEL RELOCATED

1.GROUP DIFFERENT CLASSIFICATIONS (NIPR, SIPR) OF

CABLES SEPARATELY IN THE CABLE TRAY.

2. CONDUIT FOR SIPR PATHS BELOW CEILING MUST BE

INSTALLED EXPOSED ON WALLS, NOT WITHIN WALLS.

PROVIDE CONDUIT FROM FROM CABLE TRAY ABOVE

CEILING TO SIPR DROPS.

8/6 /20

NO WORK

THIS AREA

1255149268C Polygon

1255149268C Typewritten Text

Drawing A-113 Rev1

Drawing A-114 Rev1

Drawing A-115 Rev1

Drawing A-120 Rev1

Drawing A-122 Rev1

Drawing A-123 Rev1

Drawing A-151 Rev1

Drawing A-601 Rev1

Drawing I-121 Rev1

Drawing I-122 Rev1

Drawing I-123 Rev1

Drawing FP-104 Rev1

Drawing M-101 Rev1

Drawing M-102 Rev1

Drawing E-102 Rev1

Drawing E-104 Rev1

Drawing E-106 Rev1

Drawing T-102 Rev1

File details come from the government source that posted it. Updated Aug 7, 2020.