Amendment I_SOW_Camera Refresh_FA301626Q0025.pdf
PDF 282 KB Posted
- Attached to
- Camera Security Systems
- Solicitation number
- FA301626Q0025
About this file
This is a Statement of Work (SOW) for a camera security system refresh project at JBSA Lackland, Texas (Contract FA301626Q0025, Amendment 1, dated 26 January 2026).
The contractor shall remove existing camera security systems and install new stand-alone network security camera systems in six buildings (10251, 10253, 10255, 10261, 10263, and 10265) that do not interface with the Air Force network and contain no classified or sensitive data. The project includes replacing 219 existing cameras with 222 TVI "High-Definition Transport Video" cameras, installing four Network Video Recorders (NVRs) with 24/7/365 recording capability and minimum 30-day video retention in Building 10253 Room 113, replacing three workstations and eight 43-inch LED monitors in the same location, and installing new network infrastructure including CAT6 cabling, 26-Port Gigabit PoE+ Switches, and Uninterruptible Power Supplies (UPS) across all six buildings. The equipment specifications include 218 surface-mount indoor dome cameras, four outdoor dome cameras, eight 43-inch 4K LED Smart TVs mounted at 51 inches above the floor, 13 managed PoE+ switches, 12,000 feet of CAT6e plenum cable, six UPS units, 14 Small Form-factor Pluggable (SFP) modules, and five 6U wall mount rack enclosures. All cameras shall operate in low/no light conditions, outside cameras shall be protected in all-weather shells, and all cables must be marked. The contractor must provide training and operational instructions, conduct system demonstrations for government inspection, provide manufacturer and commercial warranties, and maintain work areas in clean and safe conditions. Work hours are 7:30 a.m. to 4:30 p.m. Central Daylight Time, Monday through Friday, excluding federal holidays, with optional weekend and after-hours work permitted at no additional cost. Final inspection will be conducted by Mr. Timothy Donelson (37 TRSS 671-2164) with the contractor and contracting office to determine acceptance.
View the file
Other files
Show all 13
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
502 CONS/PKBA Camera Security Systems JBSA Lackland, TX FA301626Q0025 Amendment 1
STATEMENT OF WORK
FOR
Camera Refresh Buildings 10251, 10253, 10255, 10261, 10263, and 10265
Amendment 1
Statement of Work (SOW) Camera Security Systems for Buildings 10251, 10253, 10255, 10261, 10263, and 10265
JBSA Lackland, TX 26 January 2026
1. PROJECT SCOPE: The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision, and non-personal services, to remove existing camera security systems and install new, stand-alone network security camera systems for buildings 10251, 10253,10255, 10261, 10263 and 10265, located at 1350 Scott Drive, Joint Base San Antonio (JBSA) Lackland, TX.
1.1 The contractor shall:
1.2 Replace the current 219 cameras with 222 TVI “High-Definition Transport Video” cameras in buildings 10251, 10253, 10255, 10261, 10263, and 10265 (See Attachment 1, Building Layout).
1.3 Ensure stand-alone security monitoring system shall not touch the Air Force network.
1.4 Ensure no classified, or sensitive data used with the stand-alone security monitoring system.
1.5 Ensure no unmarked cables at any places in the system.
1.6 Provide training and instructions for proper use of system, backup, and camera usage.
2. PROJECT DESCRIPTION: The Contractor shall:
2.1 Design, deliver, and fully installation of the security monitoring system.
2.2 Replace existing cameras and install addition cameras not currently in place.
2.3 All cameras shall be of sufficient quality to be able to see in low/no light.
2.4 Ensure outside cameras shall be protected in an all-weather, wind, rain, and hail protective shell.
2.5 Replace three workstations and eight 43-inch LED monitors shall be in Bldg. 10253/Rm 113.
2.6 The eight 43inch 4K LED Smart TVs shall be installed in the location of the existing TVs.
2.7 The TVs shall be 51” above the floor.
2.8 The existing TVs and workstations are to be turned over to the Government for disposition.
Amendment 1
2.9 The system shall include four Network Video Recorders (NVRs) in 10253/Rm 113 and placed in the existing network racks.
2.10 The NVRs shall have the capability of recording 24/7/365 days a year and shall store video feeds for no less than 30 days with the capability to store to an external hard drive or DVD/CD.
2.11 Install new racks for (2 ea.) 26-Port Gigabit PoE+ Switch in server rooms in Bldgs. 10251, Rm B211; Bldg. 10255, Rm A207; Bldg. 10261, Rm D229; 10263, Rm 209 and Bldg. 10265, Rm C221. (See layout for server room).
2.12 Install one new uninterruptible power supply (UPS) in server rooms in Bldgs. 10251, Rm B211; 10253, Rm 113; Bldg. 10255, Rm A207; Bldg. 10261, Rm D229; 10263, Rm 209 and Bldg. 10265, Rm C221. (See layout for server room).
2.13 Install new CAT6 lines for the camera’s inputs in Bldgs. 10251, 10253,10255, 10261, 10263, and 10265.
2.14 Ensure the connections for the cameras convert from Bayonet Neill–Concelman (BNC) to Power over Ethernet (PoE) to the network switches, if applicable.
3. (1 EA) Engineering, Installation and Commissioning Services – All buildings:
• The contractor shall use the existing locations of the previous cameras.
3.1. The cameras shall be located in the following areas in Bldg. 10251. See building layout for assistance.
Indoor Cameras 1st Floor (Existing)
• Camera 1, south corner of walkway.
• Camera 2, south side of walkway.
• Camera 3, south side of walkway.
• Camera 4, southwest side of walkway.
• Camera 5, southwest corner of walkway.
• Camera 6, southwest side of walkway.
• Camera 7, west corner of walkway.
• Camera 8, west side of walkway.
• Camera 9, north corner of walkway.
• Camera 10, northeast corner of walkway.
• Camera 11, northeast corner of walkway.
• Camera 12, east side of walkway.
• Camera 13, east side of walkway.
• Camera 14, east side of walkway.
• Camera 15, east corner of walkway.
• Camera 16, east corner of walkway.
Indoor Camera 2nd Floor (Existing)
Amendment 1
• Camera 17, south corner of walkway.
• Camera 18, south side of walkway.
• Camera 19, south side of walkway.
• Camera 20, southwest side of walkway.
• Camera 21, southwest corner of walkway.
• Camera 22, southwest side of walkway.
• Camera 23, west corner of walkway.
• Camera 24, west side of walkway.
• Camera 25, north corner of walkway.
• Camera 26, northeast corner of walkway.
• Camera 27, northeast corner of walkway.
• Camera 28, east side of walkway.
• Camera 29, east side of walkway.
• Camera 30, east side of walkway.
• Camera 31, east corner of walkway.
• Camera 32, east corner of walkway.
Indoor Cameras 3rd Floor (Existing)
• Camera 33, south corner of walkway.
• Camera 34, south side of walkway.
• Camera 35, south side of walkway.
• Camera 36, southwest side of walkway.
• Camera 37, southwest corner of walkway.
• Camera 38, southwest side of walkway.
• Camera 39, west corner of walkway.
• Camera 40, west side of walkway.
• Camera 41, north corner of walkway.
• Camera 42, northeast corner of walkway.
• Camera 43, northeast corner of walkway.
• Camera 44, east side of walkway.
• Camera 45, east side of walkway.
• Camera 46, east side of walkway.
• Camera 47, east corner of walkway.
• Camera 48, east corner of walkway.
3.2. The cameras, TVs and Desktop computer shall be located in the following areas in Bldg.
10253. See Attachment 1 - Building Layout.
Rm 113 (Existing)
• TV 1, northwest wall.
• TV 2, northwest wall.
• TV 3, northwest wall.
Amendment 1
• TV 4, northwest wall.
• TV 5, northwest wall.
• TV 6, northwest wall.
• TV 7, northwest wall.
• TV 8, northwest wall.
• Workstation 1
• Workstation 2
• Workstation 3
Indoor Cameras 1st Floor (Existing)
• Camera 1, northwest side of bldg.
• Camera 2, north corner of bldg.
• Camera 3, east corner of bldg.
• Camera 4, east side of bldg.
• Camera 5, southeast side of bldg.
Indoor Cameras 2nd Floor (Existing)
• Camera 11, northwest side of bldg.
• Camera 10, southeast side of bldg.
Indoor Cameras 2nd Floor (Existing)
• Camera 6, north corner of bldg.
• Camera 7, north corner of bldg.
• Camera 8, east corner of bldg.
• Camera 41, east corner of bldg.
3.3. The cameras shall be located in the following areas in Bldg. 10255. See building layout for assistance.
Indoor Cameras 1st Floor (Existing)
• Camera 1, south side of stairwell.
• Camera 2, south side of walkway.
• Camera 3, south side of walkway.
• Camera 4, southwest side of walkway.
• Camera 5, southwest side of walkway.
• Camera 6, southwest side of walkway.
• Camera 7, southwest side of walkway.
• Camera 8, southwest side of walkway.
• Camera 9, southwest side of walkway.
• Camera 10, west corner of walkway.
• Camera 11, north corner side of walkway.
• Camera 12, north side of walkway.
Amendment 1
• Camera 13, north side of walkway.
• Camera 14, northeast side of walkway.
• Camera 15, northeast side of walkway.
• Camera 16, east side of walkway.
• Camera 17, east side of walkway.
Indoor Cameras 2nd Floor (Existing)
• Camera 18, south corner of the walkway.
• Camera 19, south side of walkway.
• Camera 20, south side of walkway.
• Camera 21, southwest side of walkway near stairwell.
• Camera 22, southwest side of walkway.
• Camera 23, southwest side of walkway.
• Camera 24, southwest side of walkway.
• Camera 25, southwest side of walkway.
• Camera 26, west corner of walkway.
• Camera 27, northeast side of walkway.
• Camera 28, northeast side of walkway.
• Camera 29, northeast side of walkway.
• Camera 30, northeast side of walkway near stairwell.
• Camera 31, east side of walkway.
• Camera 32, east side of walkway.
• Camera 33, east side of walkway.
Indoor Cameras 3rd Floor (Existing)
• Camera 34, south corner of walkway.
• Camera 35, south side of walkway.
• Camera 36, south side of walkway.
• Camera 37, south side of walkway.
• Camera 39, southwest side of walkway near stairwell.
• Camera 40, southwest side of walkway.
• Camera 41, southwest corner of walkway.
• Camera 42, southwest side of walkway.
• Camera 43, southwest side of walkway.
• Camera 45, west side of walkway near stairwell.
• Camera 47, north corner of bldg.
• Camera 48, north side of walkway.
• Camera 49, north side of walkway.
• Camera 50, north side of walkway.
• Camera 51, northeast side of walkway near stairwell.
• Camera 53, northeast side of walkway.
• Camera 54, east side of walkway.
Amendment 1
• Camera 55, east side of walkway.
• Camera 56, east corner of the bldg.
Outdoor Cameras 3rd Floor (Existing)
• Camera 38, southwest corner of bldg.
• Camera 44, west corner of the bldg.
• Camera 46, north corner of bldg.
• Camera 52, northeast corner of bldg.
3.4. The cameras shall be located in the following areas in Bldg. 10261. See building layout for assistance.
Indoor Cameras 1st Floor (Existing)
• Camera 1, south corner of walkway.
• Camera 2, south side of walkway.
• Camera 3, southwest side of walkway.
• Camera 4, southwest side of walkway.
• Camera 5, west corner of walkway.
• Camera 6, west corner of walkway.
• Camera 7, north corner of walkway.
• Camera 8, north side of walkway.
• Camera 9, north side of walkway.
• Camera 10, northeast side of walkway.
• Camera 11, northeast side of walkway.
• Camera 12, east side of walkway.
• Camera 13, east corner of walkway.
• Camera 14, east corner of walkway.
Indoor Cameras 2nd Floor (Existing)
• Camera 15, south corner of walkway.
• Camera 16, south side of walkway.
• Camera 17, southwest side of walkway.
• Camera 18, southwest side of walkway.
• Camera 19, west corner of walkway.
• Camera 20, west corner of walkway.
• Camera 21, west corner of walkway.
• Camera 22, north corner of walkway.
• Camera 23, north side of walkway.
• Camera 24, north side of walkway.
• Camera 25, northeast side of walkway.
• Camera 26, east side of walkway.
• Camera 27, east side of walkway.
Amendment 1
• Camera 28, east corner of walkway.
• Camera 29, east corner of walkway.
• Camera 30, east side of stairwell.
Indoor Cameras 3rd Floor (Existing)
• Camera 31, south corner of walkway.
• Camera 32, south side of walkway.
• Camera 33, southwest side of walkway.
• Camera 34, southwest side of walkway.
• Camera 35, west corner of walkway.
• Camera 36, west corner of walkway.
• Camera 37, northwest side of walkway near stairwell.
• Camera 38, north corner of walkway.
• Camera 39, northeast side of walkway.
• Camera 40, northeast side of walkway.
• Camera 41, northeast side of walkway.
• Camera 42, east side of walkway.
• Camera 43, east side of walkway.
• Camera 44, east corner of walkway.
• Camera 45, east corner of walkway.
• Camera 46, east side of stairwell.
3.5. The cameras shall be located in the following areas in Bldg. 10263. See building layout for assistance.
Indoor Cameras 1st Floor (Existing)
• Camera 8, south side of bldg.
• Camera 9, southwest side of bldg.
• Camera 10, west side of bldg.
• Camera 11, north side of bldg.
• Camera 15, southeast side of bldg.
Indoor Cameras 1st Floor (New)
• Camera 12, northeast side of bldg.
• Camera 13, east side of bldg.
• Camera 14, southeast side of bldg.
Indoor Cameras 2nd Floor (Existing)
• Camera 1, west corner of bldg.
• Camera 2, west corner of bldg.
• Camera 3, north corner of bldg.
• Camera 4, east corner of bldg.
Amendment 1
• Camera 5, south corner of bldg.
• Camera 6, southeast side of bldg.
• Camera 7, northwest side of bldg.
3.6. The cameras shall be located in the following areas in Bldg. 10265. See building layout for assistance.
Indoor Cameras 1st Floor (New)
• Camera 1, south corner of walkway.
• Camera 2, south side of walkway.
• Camera 3, southwest side of walkway.
• Camera 4, southwest side of walkway.
• Camera 5, west corner of walkway.
• Camera 6, west corner of walkway.
• Camera 7, north corner of walkway.
• Camera 8, north side of walkway.
• Camera 9, north side of walkway.
• Camera 10, northeast side of walkway near stairwell.
• Camera 11, northeast side of walkway.
• Camera 12, east side of walkway.
• Camera 13, east corner of walkway.
• Camera 14, east corner of walkway.
Indoor Cameras 2nd Floor (New)
• Camera 15, south corner of walkway.
• Camera 16, south corner of walkway.
• Camera 17, southwest side of walkway.
• Camera 18, southwest side of walkway.
• Camera 19, west corner of walkway.
• Camera 20, west corner of walkway.
• Camera 21, west corner of walkway.
• Camera 22, north corner of walkway.
• Camera 23, north side of walkway.
• Camera 24, north side of walkway.
• Camera 25, northeast side of walkway.
• Camera 26, northeast side of walkway.
• Camera 27, east side of walkway.
• Camera 28, east corner of walkway.
• Camera 29, east corner of walkway.
• Camera 30, east side of stairwell.
Indoor Cameras 3rd Floor (New)
Amendment 1
• Camera 31, south corner of walkway.
• Camera 32, south side of walkway.
• Camera 33, southwest side of walkway.
• Camera 34, southwest side of walkway.
• Camera 35, west corner of walkway.
• Camera 36, west corner of walkway.
• Camera 37, north side of walkway near stairwell.
• Camera 38, north corner of walkway.
• Camera 39, north side of walkway.
• Camera 40, north side of walkway.
• Camera 41, northeast side of walkway.
• Camera 42, east side of walkway.
• Camera 43, east side of walkway.
• Camera 44, east corner of walkway.
• Camera 45, east corner of walkway.
• Camera 46, east side of stairwell.
3.7. The equipment shall be approximate to the following specifications:
222 (EA) Enterprise Edition camera connection license 4 (EA) Network Video Recorder 3 (EA) Workstation 218 (EA) Surface Mount Indoor Dome Camera 4 (EA) Outdoor dome camera 4 (EA) Outdoor ceiling mount 4 (EA) Outdoor pendant mount adapter 4 (EA) Outdoor Dome Cover 8 (EA) 43” 4K LED TVs 8 (EA) Universal Low Profile wall mount 13 (EA) 26 – Port Power over Ethernet + Switch 12,000 (FT) CAT6e plenum cable 1 (EA) Engineering, Installation and Commissioning Services 6 (EA) Uninterruptible Power Supply (UPS) 14 (EA) Small Form-factor Pluggable (SFP) 5 (EA) 6U Wall Mount Rack Enclosure
3.8.. Item needed and quantity (as applicable):
222 (EA) Enterprise Edition camera connection license
• Supports 222 connections
• Software supports multiple actions on camera notifications.
• Dual Streaming for Open Network Video Interface (ONVI) compliant cameras.
Amendment 1
• Supports H.265, H.264, MPEG4. MJPEG, JPEG2000 video compression.
3.9. Salient Characteristics:
4 (EA) Network Video Recorder
• 64 Terabyte (TB)
• 2 Universal Rack Mount
• Recording Mode Real Time
• Software solution
• Hardware solution
• Simultaneous live, recording and playback
• Recording system Hard Disk Drive
• Storage capacity 16 GB
• Resolution 7K (30 Mega Pixel)
• Expandable to multi Network Video Recorder
• Standard Operating system
• Voltage 100 ~ 240 Voltage Alternate Current
• Power consumption watts (W) 270 ~ 750
• Preloaded with video management software
3 (EA) Workstation
• Double Data Rate 4 Synchronous dynamic random-access memory
• Processor Type Core i3
• Standard Memory 8 Gigabit (GB)
• Ethernet Technology GB Ethernet
• Operating System standard Enterprise
• Input Voltage 120 V Alternate Current (AC), 230 V AC
• Environmental Certification Restriction of Certain Hazardous Substances
• Universal Serial Bus Keyboard
• Universal Serial Bus Mouse
• Power cord
• Mini Tower, DVD-RW
• 2 Gigabit Ethernet RJ-45 ports (1000Base-T)
• 2 x Multicast Dissemination Protocol to Display Port Adapters
• 2 x Multicast Dissemination Protocol to High-Definition (HD) Multimedia Interface Adapters
• Form Factor Small Form Factor
• 4K SUPPORT Supports full 4K video streaming
• Supports High Definition Cameras
218(EA) Surface Mount Indoor Dome Camera
• Color Type Color / Monochrome
• Resolution 4 Megapixel
• Indoor Type
• Mount Type Surface
• Electrical Specifications Voltage: 12 Volts Direct Current (DC) / 24 Volts Alternate Current (AC)
• Supports Power over Ethernet
• Focal length 3.3 ~ 9 mm
• Compression H.264 H.265 High Definition Stream Management Smart Codec
• Smart Codec, Motion JPEG
• Back Light Compensation
• White Balance
• Network Properties Interface: 100BASE-TX, RJ45 Connector, CAT5e Cabling
• Supports standard multiple network protocols
• Image Frame Rate: 25 fps/30 fps
• Protection: Internet Protocol (IP) 66, IP67, IK10.
• Expandable Storage
• True Wide Dynamic Range
4 (EA) Outdoor Dome Camera
• Chip Inch Size 1/2.8
• Color Type Color / Monochrome
• Resolution 4MP
• Electrical Specifications Voltage: 12Volts DC C, 24Volts AC
• Power over Ethernet
• Power Consumption: 13 W
• Motion Activated
• Mount Type Surface
• Wide Dynamic Range
• Network Properties Image Frame Rate: 25 fps/30 fps
• Interface: 100BASE-TX, RJ45 Connector
• Supports multiple standard network protocols
• Back Light Compensation
• White Balance Support
• Zoom Support
• Compression Type H.264m H265 High Definition Streaming Management
• Smart Codec, Motion Joint Photographic Experts Group
• True Wide Dynamic Range
4 (EA) Outdoor ceiling mount
• Lanyard anchor
• Ethernet port openings
4 (EA) Outdoor Dome Cover
• Dome bubble and cover, for outdoor surface mount or pendant mount, clear.
4 (EA) Pedant wall mount adapter
• Finish: Powder coat,
• 3/4” National Pipe Thread (NTP) conduit entry
8 (EA) 43” 4K LED Smart TV
• Display Type: LED
• Resolution: 4K (2160p)
• Refresh Rate: 60 Hz
• Number of USB Port: 1
• Number of HDMI Inputs: 3
• Ethernet Port: 1
• Network Compatibility: Built- in Wi-Fi, Ethernet
• Voltage/Wattage: 100-200 volts/ 115 watts
8 (EA) Universal Low Profile wall mount
• Tilt Adjustment -10 to +0°
• Orientation Landscape
• Distance from Mounting Surface 1.77"
13 (EA) Smart Managed Power over Ethernet + Switch
• Connectors (24) 10/100/1000 RJ-45 ports (2) 100/1000 SFP slots
• Store-and-Forward switching architecture
• Media Access Control (MAC) 8K MAC address table
• Power Input 100-240 Volts Alternate Current
• PoE Budget 370 Watts 30 Watts for (12) ports simultaneously
• PoE Budget 15.4 Watts for (24) ports simultaneously
• Surge Protection 6 kilo volts
• Internet Protocol Pv6 Access Management
• Support Jumbo Frame up to 9Kbytes
• Dynamic Host Configuration Protocol Relay
• Supports MAC
• Supports Access Control List
• Internet Protocol standard/extended Access Control List
• Link Layer Discovery Protocol
• Institute of Electrical and Electronics Engineers 802.3az Energy Efficiency
• Internet Protocol Source Guard, Port Security
12,000 FT CAT6e plenum cable
• Connectors RJ45s and Keystone Jacks
• Specifications 23 American Wire Gauge
6 (EA) Uninterruptible Power Supply (UPS)
• Output power capacity: 600Watts / 1.0kVA
• Nominal Output Voltage: 120V
• Output Frequency (sync to mains): 60Hz +/- 3 Hz
• Interface Port(s): USB
• Control panel Multi-function LCD status and control console
• Audible Alarm: Alarm when on battery distinctive low battery
14 (EA) Small Form-factor Pluggable (SFP)
• Connector Type: LC Duplex
• Data Rate: up to 1.25Gps
• Distance: 20km with 9/125 SMF
5 (EA) 6U Wall Mount Rack Enclosure
• Color: Black
• Rack Height: 6U
• Rack Depth: Shallow
• Number of Vertical Mounting Rails: 2
4. GENERAL INFORMATION: All Outside Plant (OSP) and Inside Plant (ISP) cabling projects installed on Lackland AFB, Medina Annex, or Camp Bullis as part of any MILCON, SABER, or other project shall meet commercial industry and Telecommunications Systems Cabling Standards. Please reference 13A Standards and UFC 3-580-1 Telecommunication Interior Infrastructure Planning and Design with Change.
5. WORK HOURS AND SPECIAL CONDITIONS: Work hours shall begin at 7:30 a.m. through 4:30 p.m., central daylight time (CDT), Monday through Friday, excluding Federal holidays. At the option of the Government and with approval of the Contracting Officer, work may be permitted on Federal holidays, weekends, or after 4:30 p.m. at no additional cost to the Government.
New Year's Day January 1st Martin Luther King Jr's Birthday 3rd Monday in January President’s Day 3rd Monday in February Memorial Day Last Monday in May Juneteenth June 19th Independence Day July 4th Labor Day 1st Monday in September Columbus Day 2nd Monday in October Veterans' Day November 11th Thanksgiving Day 4th Thursday in November Christmas Day December 25th
6. BASE FIRE REGULATIONS: The contractor shall comply with all JBSA-Lackland AFB Post Fire Regulations.
7. SITE MAINTENANCE AND CLEANUP:
7.1. The contractor shall maintain work areas in a neat, clean, and safe condition. The contractor shall be responsible for providing, installing, and the removal of any temporary signage, barriers, barricade tape, etc. which may be required to control pedestrians in the work area. The contractor shall collect all trash, debris, refuse, garbage, etc., which is. The aforementioned materials shall be removed from the site by appropriate means daily. Contractor shall not work or store materials in a manner that would hinder or otherwise block pedestrian circulation to exit corridors and exit doors in the event of an emergency or fire. Storage of materials shall be coordinated with the customer. The contractor shall be responsible for freight, unpacking, delivery and inside installation.
7.2. The contractor shall return removed equipment to the Government for disposal.
7.3. The Government shall be responsible for disposal of all removed equipment
8. ENERGY CONSERVATION: The contractor shall use good judgment in the conservation of Government utilities. The contractor shall adhere to and enforce prevailing energy conservation practices.
9. CONTRACT MANAGEMENT: No changes in or deviation from the scope of service shall be affected without a modification executed by the Contracting Officer authorizing such changes.
10. RECORDS MANAGEMENT: The Contractor shall manage all data created for Government use or legally controlled by the Government, in support of the functional activity or required by AF publication, IAW with the AF Records Management procedures in Air Force Instruction (AFI) 33-322, Air Force Manual (AFMAN) 33-363 and Air Force Instruction (AFI) 33-364 (or their subsequent replacements).
12. TESTING: After installation, the contractor shall conduct a demonstration of the camera security systems capabilities. A Government representative shall observe the demonstration to ensure the audio system meets the Government’s needs.
13. INSPECTION AND ACCEPTANCE: Mr. Timothy Donelson, 37 TRSS 671-2164 will conduct the final inspection with the Contractor and the Contracting Office to determine whether the project can be accepted, or corrections required prior to acceptance.
14. WARRANTY: Manufacturer and Standard Commercial warranties for individual pieces shall be provided along with contact information, and operational manuals.
15. ATTACHMENT(S):
12.1 Attachment 1 – Building Layout.
12.2 Attachment 2 – Salient Characteristics
| Statement of Work (SOW) |
| JBSA Lackland, TX |
File details come from the government source that posted it. Updated .