Summary_of_Changes-RFP_Amendment_1.pdf

Summary of Changes: Amendment 1 7 Jun 2018

Performance Work Statement

• PWS Date FROM: 16 May 2018

TO: 4 Jun 2018

• PWS Section 1.2.4.4. Phase-In Transition of Contractor

From: The successor contractor shall develop and submit a phase-in plan to the CO and site-specific COR NLT calendar days prior to contract start.

To: Section 1.2.4.4. Phase-In Transition of Contractor was removed from the PWS

• PWS Section 2.2.2.1.1. ROCC HOURS OF OPERATION

From: The ROCC shall open no later than one hour prior to the start of the first scheduled range mission. The Restricted and TAC range operating hours are published as Monday through Friday between the hours of 0730-2330, and other times by Notice To Airmen (NOTAM). Daily scheduling is accomplished by Luke AFB Range Scheduling, 56 Range Management Office (RMO)/ASMS from 0730-1430 with the contractor managing the schedule for efficiency from 1430-2330. 56 RMO/ASMS shall notify the contractor of scheduled BMGR missions no later than 1430 on the duty day prior.

To: The ROCC shall open no later than one hour prior to the start of the first scheduled range mission. The Restricted and TAC range operating hours are published as Monday through Friday between the hours of 0730-2330, and other times by Notice To Airmen (NOTAM).

Daily scheduling is accomplished by Luke AFB Range Scheduling, 56 Range Management Office (RMO)/ASMS from 0730-1400 with the contractor managing the schedule for efficiency from 1400-2330. 56 RMO/ASMS shall notify the contractor of scheduled BMGR missions no later than 1430 on the duty day prior.

• PWS Section 3.2.2.1.3 EW Training

From: Threat operators shall simulate a wide range of air defense configurations and complexities ranging from autonomously operated threats to a complex and highly integrated air defense system. The level of IADS applied shall be requested by the aircrew, based on the aircrew training objective, or otherwise determined by the Government. All EW engagement activity shall be recorded via the Advanced Display and Debriefing System (ADDS), Personal Computer Debriefing System (PCDS), or DVD recording media depending on the equipment configuration utilized.

To: Threat operators shall simulate a wide range of air defense configurations and complexities ranging from autonomously operated threats to a complex and highly integrated air defense system. The level of IADS applied shall be requested by the aircrew, based on the aircrew training objective, or otherwise determined by the Government. All EW engagement activity shall be recorded via the Integrated Crew Debriefing System (ICADS) utilizing the Tactical Air Ranges Integration Facility (TARIF) EW Server, or DVD recording media depending on the equipment configuration utilized.

SF 33 Section B Supplies or Services and Prices- Amendment

• SF33

From: FA3002-18-R-0010 To: FA3002-18-R-0010-Amendment 1

• SF 33 Block 5. Date of Issued

From: 18 May 2018 To: 7 Jun 2018

• CLIN X001

From: ACTS Service at Luke AFB, AZ FFP IAW PWS 16 May 2018 To: ACTS Service at Luke AFB, AZ FFP IAW PWS 4 Jun 2018

• CLIN X004

From: Equipment Replacement for Luke AFB COST IAW PWS 16 May 2018 To: Equipment Replacement for Luke AFB COST NTE-NOT TO EXCEED COST-IAW PWS 4 Jun 2018

• CLIN X005

From: ACTS Service at Holloman AFB NM FFP IAW PWS 16 May 2018 To: ACTS Service at Holloman AFB NM FFP IAW PWS 4 Jun 2018

• CLIN X007

From: NTE-NOT TO EXCEED COST, IAW PWS, Attachment one (1), Section 3.1.2.1.

FOB: Destination To: NTE-NOT TO EXCEED COST, IAW PWS 4 Jun 2018, Attachment one (1), Section 3.1.2.1.

• CLIN X008

From: Equipment Replacement for Holloman AFB COST IAW PWS 16 May 2018 To: Equipment Replacement for Holloman AFB COST

• CLIN X009

From: GSA Leased Vehicles at Luke AFB COST IAW PWS 16 May 2018 To: GSA Leased Vehicles at Luke AFB COST

• CLIN X010

From: GSA Leased Vehicles at Holloman AFB COST IAW PWS 16 May 2018 To: GSA Leased Vehicles at Holloman AFB COST

Section J-List of Documents, Exhibits and Other Attachments

• ATTACHMENTS

From: Attachment 1 Performance Work Statement Date 18 May 18

To: Attachment 1 Performance Work Statement-Amendment 1 Date 4 Jun 18

From: Attachment 11 Section L Date RFP Date

To: Attachment 11 Section L-Amendment 1 Date RFP-Amendment 1 Date

ATCH 11 Section L-Amend

• Section L.2.1. Proposal Shall be submitted as follows:

From: Volume II Past Performance Page Limit

To: Volume II Past Performance Page Limit 25**

**Subcontractor Letter of Consent and Client Authorization Letters do not count towards the page count.

• Section L.2.4.5. Foldouts:

From: Legible tables, charts, graphs and figures shall be used wherever practical to depict organizations, systems and layout, implementation schedules, plans, etc. These displays shall be uncomplicated, legible and shall not exceed 11 x 17 inches in size. Foldout pages shall fold entirely within the volume. Each printed side of a foldout will count as two pages.

Foldout pages may only be used for large tables, charts, graphs, diagrams and schematics;

not for pages of text. For tables, charts, graphs and figures, the font shall be no smaller than 10 font, Times New Roman. Design drawings may be in the Offeror's format, provided standard commercial policies and practices are followed. All information (except documentation numbers, classification markings, and page numbers) shall be contained within an image area of 11 x 17 inches.

To: Legible tables, charts, graphs and figures shall be used wherever practical to depict organizations, systems and layout, implementation schedules, plans, etc. These displays shall be uncomplicated, legible and shall not exceed 11 x 17 inches in size. Foldout pages shall fold entirely within the volume. Each printed side of a foldout will count as front (one page) and back (one page). Foldout pages may only be used for large tables, charts, graphs, diagrams and schematics; not for pages of text. For tables, charts, graphs and figures, the font shall be no smaller than 10 font, Times New Roman. Design drawings may be in the Offeror's format, provided standard commercial policies and practices are followed. All information (except documentation numbers, classification markings, and page numbers) shall be contained within an image area of 11 x 17 inches.