F10242034 LAMINATION.pdf

This document is a detailed technical drawing for a lamination prototype of an ORBE magnet, created for the Fermi National Accelerator Laboratory (Fermilab) at the United States Department of Energy. The technical specification details precise manufacturing requirements for a lamination component with specific dimensional tolerances, including a total length of 600±0.1 mm, multiple detailed sections with scaling (Detail A at 1:1 scale, Detail B at 3:4 scale), and critical notes about part preparation. The drawing specifies the material as ASTM A36 steel and includes manufacturing specifications such as: parts must be free of dirt, grease, oil, and chips; free of sharp edge corners and burrs; laminations must be free of dents and scratches; and must be stamped using a die. The approximate weight is listed as 0.68kg (1.71lbs), with precise measurements and geometric details for multiple sections of the component.