F10232989_A.pdf
PDF 235 KB Posted
- Attached to
- Lamination Die and Machined Parts
- Solicitation number
- RFP365662
About this file
This document is a detailed technical drawing for a Front Plate, Prototype, ORBE Magnet Core, created for the Fermi National Accelerator Laboratory, a United States Department of Energy facility. The technical drawing (Drawing Number F10232989) specifies a precisely manufactured plate made from 316 Stainless Steel with multiple complex dimensional specifications, including various hole placements, tolerances (±0.12 to ±0.3), and surface finish requirements (Ra: 3.2). The drawing includes specific manufacturing notes mandating the part be free of dirt, grease, oil, chips, sharp edges, corners, and burrs, and follows ASME Y14.5M-2009 dimensioning standards. The document is dated 27-Jan-2025, with revision control documentation completed on 28-Jan-2025, and involves technical personnel from the Design and Drafting group with a CAGE Code of OU5R6.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
2 0.3 0.12 N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
FRONT PLATE, PROTOTYPE, ORBE MAGNET CORE
SCALE SIZE DRAWING NUMBER SHEET REV
1:2.5& A3 F10232989 1 OF 1 AAS SHOWN
DRAWN J.VANDER MEULEN DATE 27-Jan-2025 CHECKED J.COGHILL DATE 27-Jan-2025 APPROVED V.CHERNENOK DATE 27-Jan-2025
USED ON
MATERIAL
316 STAINLESS STEEL
GROUP: Technical Division - Design and Drafting CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
A F10232989-A-RCD 28-Jan-2025 DRAWN J.VANDER MEULEN 28-Jan-2025 APPROVED V.CHERNENOK
DESCRIPTION: FRONT PLATE, PROTOTYPE, ORBE MAGNET CORE
PROJECT:
CATEGORY: PLATE
TE
M
PL
AT
E
VE
R
SI
O N
: 2
1.
.0
A
A
B
B
C
C
D
D
350 ±0.12 125 ±0.12
150 ±0.12
2X 55.9 ±0.12
4X 13.88 ±0.12
28 ±0.12
NOTES (UNLESS OTHERWISE SPECIFIED):
1. PART MUST BE FREE OF DIRT, GREASE, OIL, AND CHIPS.
2. PART MUST BE FREE OF SHARP EDGES, CORNERS, AND BURRS.
600 ±0.3
161.8 ±0.12
4X 38.2 ±0.12
10 ±0.3
A
⏥ 0.2
DETAIL A
SCALE 2:1
DETAIL A
3X 25° ±1°
3X 5 ±0.5
∥ 0.2 A
180.9 ±0.12
4 PLACES
File details come from the government source that posted it. Updated .