F10232986_A.pdf
PDF 221 KB Posted
- Attached to
- Lamination Die and Machined Parts
- Solicitation number
- RFP365662
About this file
This technical drawing is a detailed engineering design for a Tie Bar Prototype for an ORBE Magnet Core, created by Fermi National Accelerator Laboratory for the PIP-II Booster project. The drawing specifies a precision machined component made from 316 Stainless Steel with tight dimensional tolerances, including a total length of 870±0.3 mm, a width of 15.88±0.12 mm, and specific end detailing with 25° ±1° angles. The document includes critical manufacturing notes requiring the part to be free of dirt, grease, oil, chips, sharp edges, corners, and burrs, with a maximum surface roughness (Ra) of 3.2. The drawing follows ASME Y14.5M-2009 standards and uses third-angle projection, with design approval by multiple Fermi Lab personnel on 27-Jan-2025 and a revision control document dated 28-Jan-2025.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
UNLESS OTHERWISE SPECIFIED
±X ±X.X ±X.XX ±X/X ±X°
2 0.3 0.12 N/A 1°
BREAK ALL SHARP EDGES, MAX: 0.5
DO NOT SCALE DRAWING
DIMENSIONS BASED ON: ASME Y14.5M-2009
MAX MACHINE ALL SURFACES, Ra: 3.2
DRAWING UNITS: MM
THIRD ANGLE PROJECTION
FERMI NATIONAL ACCELERATOR LABORATORY
UNITED STATES DEPARTMENT OF ENERGY
NAME
TIE BAR, PROTOTYPE, ORBE MAGNET CORE
SCALE SIZE DRAWING NUMBER SHEET REV
1:2 & A3 F10232986 1 OF 1 AAS SHOWN
DRAWN J.VANDER MEULEN DATE 27-Jan-2025 CHECKED J.COGHILL DATE 27-Jan-2025 APPROVED V.CHERNENOK DATE 27-Jan-2025
USED ON
MATERIAL
316 STAINLESS STEEL
GROUP: Technical Division - Design and Drafting CAGE CODE: OU5R6
REV REVISION CONTROL DOCUMENT DATES SIGNATURES
A F10232986-A-RCD 28-Jan-2025 DRAWN J.VANDER MEULEN 28-Jan-2025 APPROVED V.CHERNENOK
DESCRIPTION: TIE BAR, PROTOTYPE, ORBE MAGNET CORE
PROJECT: PIP-II_Booster
CATEGORY: BAR
TE
M
PL
AT
E
VE
R
SI
O N
: 2
1.
.0
A
A
B
B
C
C
D
D
NOTES (UNLESS OTHERWISE SPECIFIED):
1. PART MUST BE FREE OF DIRT, GREASE, OIL, AND CHIPS.
2. PART MUST BE FREE OF SHARP EDGES, CORNERS, AND BURRS.
38.1 ±0.12
15.88 ±0.12
870 ±0.3
DETAIL A
SCALE 2:1
DETAIL A
4X 25° ±1° 4X 5 ±0.3
BOTH ENDS
File details come from the government source that posted it. Updated .