Exhibit_M_-_Electrical_Floor_Boxes_PD.pdf

Submittal Cover Page

Downtown Library and Affordable Housing Project

119 Lincoln St. Santa Cruz CA, 95060

Notes:

ECHELCON, INC.

Review is for general conformance with the contract documents for this project only. Subcontractor or supplier is responsible for omissions, quantities, dimensions, field conditions, coordination with all trades, and information pertaining to fabrication processes or construction techniques. Review shall not relieve subcontractor or supplier from responsibility for errors, omissions or deviation from contract documents. Stamped submission does not constitute a change order.

By:

Date:

Submittal # Description:

Jackson Bigham

26 05 33 - 01.1 Electrical Floor Boxes - Banister

1/7/2025

CONSULTANT/ OTHER

ENGINEER

ARCHITECT

See engineers review sheet, next page.

NO EXCEPTIONS TAKEN

MAKE CORRECTIONS NOTED

REVISE & RESUBMIT

SUBMIT SPECIFIED ITEM

REVIEWER DATE

SUBMITTAL WAS REVIEWED FOR DESIGN CONFORMITY AND GENERAL

COMPLIANCE WITH THE CONTRACT DOCUMENTS ONLY. THE CONTRACTOR

IS RESPONSIBLE FOR CONFIRMING AND COORDINATING DIMENSIONS AT

THE PROJECT SITE FOR TOLERANCE, CLEARANCE, QUANTITIES, FABRICATION,

COORDINATION WITH OTHER TRADES, AND CONSTRUCTION MEANS AND

METHODS. THIS REVIEW DOES NOT RELIEVE THE CONTRACTOR FROM FULL

CONFORMANCE WITH THE CONTRACT DOCUMENTS.

JAYSON ARCHITECTURE | 587 SHOTWELL STREET | SAN FRANCISCO, CA

DIEGO PEREZ 01/23/2026

General Note: Refer to JAYSON Architectural Field Report 2.1.

NET:

FB-1 - Floor Box #RFBA10R55OG; Cover Plate FPLCTCALTR FB-2 - Floor Box #RFBA4R30OG; FPCTCALTR FB-3 - Floor Box #EFB45S-OG FB-5 - Floor Box #RFBA2R25OG PT-1+PT-4 - 6" Pre-Pour Poke-thru sleeve: 6PPS PT-2+PT-3 - 8" Pre-Pour Poke-thru sleeve:8PPS

MCN:

- FB-3:

- COVER PLATES:

- BETWEEN GRIDS 5 & 6: EFB45CTCAATR (2X)

- BETWEEN GRIDS 8 & 9: EFB45CTCSBTR (3X)

- FB-5:

- COVER PLATES:

- BETWEEN GRIDS 1 & 5: FPCTCALTR (8X)

- BETWEEN GRIDS 8 & 9: FPBTCBSTR (9X)

DannyNguyenPham Text Box

FOR REFERENCE ONLY

SUBMITTAL REVIEW REPORT

EMERALD CITY ENGINEERS, INC.

Lynnwood, Washington

ECE PROJECT NO.: 2460-001 RECEIPT DATE: 1/7/26 SUBMITTAL NO.: 26 05 33-01.1

PROJECT: Downtown Library and Affordable Housing Project

ARCHITECT: Ten Over Studio, Inc.

This submittal has been reviewed for general conformance with design concept only.

Dimensions and quantities have not been reviewed. Review as noted does not relieve the contractor of responsibility for conformance with Contract Documents, all of which have priority over this submittal. A copy of this review is attached to and made a part of each copy of the submittal.

Review by: Matthew Bihis/Chloe Yoo Date: 1/7/26

(Matthew Bihis, P.E./Chloe Yoo)

A. The following submittals were reviewed:

• Electrical Floor Boxes.

B. The following items conform to design concept:

• All items listed in section “A” unless noted below.

C. The following items conform to design concept with revisions as noted:

• N/A

D. The following items are non-conforming; revise and resubmit:

E. The following items are missing; provide submittal:

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold

Recessed Floor Boxes for Concrete

RFBA2R, RFBA4R, RFBA6R, RFBA10R

RFBA Series of Floor Boxes are versatile recessed activation solutions that provide power, communication and/or audio/video services to open space areas, or directly to workstations. The floor boxes come in various sizes and depths, including 2, 4, 6 and 10-gangs to best fit your specific application. The boxes utilize FloorPort series covers and can be installed in carpet, wood, tile and polished concrete floor coverings. An optional terrazzo ring is available for the 2 and 4-gang boxes for use with bare concrete and terrazzo applications. The RFBA series is designed with improved wire and cable routing, allowing for easier wire pulling in adjacent compartments and around corners.

Compliance

WIREMOLD®

RFBA Series Rectangular Activation Floor Boxes cULus Listed: Metallic Outlet Boxes for tile, terrazzo, carpet and wood floors.

File E2961 Guide QCIT

Features & Benefits

• Suitable for Various Applications. Steel and on-grade

(epoxy coated) to meet your specific installation requirements with support for installation in carpet, wood flooring, tile, terrazzo and polished concrete..

• Various Gang and Depth Options Available. Various Gang and Depth Options Available. Choose from either 2, 4, 6 or 10-gang boxes to fit your application. The 2 and 4-gang options are available in either a shallow (2.5") depth or standard (3.0") depth box..

• Common Mounting Plates. All models share the same mounting plates, allowing for easier configuration and specification.

• Numerous Conduit Knockouts. Features knockouts on all sides and bottom of box to allow for greater installation flexibility to work within your environment..

• FloorPort Activation Covers. Provides TopGuard protection from water, dirt and debris plus added strength and durability. Available in brushed aluminum and five decorative powder coat finishes: Black, Brass, Nickel, Gray and Bronze.

• Improved Cable Management. Internal compartments feature improved wire and cable routing for easier wire pulling in adjacent compartments and around corners.

• Post-Pour Features: Allows for adjustment post-pour and features removable dividers that can be installed or removed before or after the concrete pour.

The RFBA floor box is built for multiple applications and environments

Interior compartment of box features rounded corners for improved cable routing

All models share eight (8) common device plates, allowing for data and power within the same box

Rectangular extension ring can be used to extend height of box up to 4 inches

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 2

WIREMOLD®

RFBA Series Rectangular Activation Floor Boxes

2-Gang RFBA Floor Box, Shallow 2.5” Depth – Steel floor box designed for above grade installations. Features 2-gangs of box capacity with 3” available behind plates. When ordering device plates for box, 2 blank device plates (Cat. No. RFBAB) must also be ordered to seal off wire and cable routing passageways. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 2.5”. If using the collar, pour should be 3”.

Sold Separately:

• FloorPort Covers • Device Plates

2-Gang RFBA On-Grade Floor Box, Shallow 2.5” Depth – Steel floor box designed for on-grade installations with a fusion-bonded epoxy for use on metal reinforcement bar and related accessories before encapsulating in concrete. Features 2-gangs of box capacity with 3” available behind plates.

When ordering device plates for box, 2 blank device plates (Cat. No. RFBAB) must also be ordered to seal off wire and cable routing passageways. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo, and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 2.5”. If using the collar, pour should be 3”.

Sold Separately:

• FloorPort Covers • Device Plates

Resource RFBA Series Floor Boxes with Rectangular Activations Ordering Information

RFBA2R25OG

RFBA2R25

RFBA Series Floor Boxes with Rectangular Activations Selection Guide Box Model Box Type Box Capacity Box Depth Conduit Size Cover Type

RFBA2R25 Above Grade 2-Gang 2.5" ¾” – 1 ¼" FloorPort

RFBA2R25OG On-Grade 2-Gang 2.5" ¾” – 1 ¼" FloorPort

RFBA2R30 Above Grade 2-Gang 3.0" ¾” – 2"* FloorPort

RFBA2R30OG On-Grade 2-Gang 3.0" ¾” – 2"* FloorPort

RFBA4R25 Above Grade 4-Gang 2.5" ¾” – 1 ½" FloorPort

RFBA4R25OG On-Grade 4-Gang 2.5" ¾” – 1 ½" FloorPort

RFBA4R30 Above Grade 4-Gang 3.0" ¾” – 2"* FloorPort

RFBA4R30OG On-Grade 4-Gang 3.0" ¾” – 2"* FloorPort

RFBA6R30 Above Grade 6-Gang 3.0" ¾” – 2"* Large FloorPort

RFBA6R30OG On-Grade 6-Gang 3.0" ¾” – 2"* Large FloorPort

RFBA10R55 Above Grade 10-Gang 5.5" ¾” – 2" Large FloorPort

RFBA10R55OG On-Grade 10-Gang 5.5" ¾” – 2" Large FloorPort

Dimensions:

3/4" KO

1-1/4" KO 3/4" KO

1" KO

3/4" KO

1-1/4" KO

14" [356mm]

17-3/4” [452mm]

2-1/2” [64mm]

3” [76mm]

8-9/16” [217mm]

* Additional 2HUB accessory is needed on the 2, 4 and 6-gang boxes if using a 2” conduit feed to the box. Largest knockout without the 2HUB accessory on the 2, 4 and 6-gang boxes is 1 ¼”.

1" KO

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 7

RFBA Series Rectangular Activation Floor Boxes

10-Gang RFBA Floor Box, 5.5" Depth - Steel floor box designed for above grade installations. Features 10-gangs of box capacity with at least 2 1/2" available behind device plates. Fully adjustable before and after concrete pour. Designed for carpet, tile, and wood flooring. Terrazzo and bare concrete kit not available.

Concrete Pour: minimum concrete pour without collar is 5.5". If using the collar, pour should be 6".

Sold separately:

• Device Plates

• Large FloorPort Covers

10-Gang RFBA On-Grade Floor Box, 5.5" Depth - Steel floor box designed for on-grade installations with a fusion-bonded epoxy for use on metal reinforcement bar and related accessories before encapsulating in concrete. Features 10-gangs of box capacity with at least 2 1/2" available behind device plates. Fully adjustable before and after concrete pour.

Designed for carpet, tile, and wood flooring. Terrazzo and bare concrete kit not available.

Concrete Pour: minimum concrete pour without collar is 5.5". If using the collar, pour should be 6".

Sold separately:

• Device Plates

• Large FloorPort Covers

Resource RFBA Series Floor Boxes with Rectangular Activations Ordering Information

RFBA10R55OG

RFBA10R55

Dimensions:

12-3/16" [310mm]

6" [152mm]

15-7/8" [403mm]

5-1/2" 140mm]

10-3/8" [263mm]

10-5/8" [270mm]

19" [483mm]

1" KO

[25mm]

1-1/4" KO

[32mm]

2" KO

[51 mm]

1-1/4" KO

[32mm]

2" KO

[51 mm]

1-1/2" KO

[38mm]

1" KO

[25mm]

1111111111111111111111111111111""""""""""""""" KOKOKOKKOKOOOOOKKKKKKKKOKOKOOOOOOKKKKKKOOOOOOOOKOKKKKKOOOOOOOOOKKKKOOOOOOKOKKKKKKOOOOOOOKOKKKKKOOOOKOKKKKKOOOOKKKKKKKKOOOOOKKKKKKOKOOOOOKKKKKKKKOOOKKKKKKKKKKKKKKKKOOOOKKKKKKKKKOKKKKKKKKKKOOOKKKKOOOOKKKKKKOOOOOKKKKOOOOOOOOOKKKKKOOOOOOKKKKOOOOOO [25[2[[[25[2252522222222555[[[25[25[2252522225222[252555[2252222552555[[[[[22222252222552555555[[[2525222252525555255555222225555555[22525555555555555555555552525555555525555555225555555522225555222255522222222222552222255555222225555525222225255555555222255555555222555552225555555[[[[ mm]mm]mmmmmm]m]m]m]mm]mmmmmmmm]mmmmmm]mmmmmmmmmm]]]]]]]mmmmmm]mmmmmmmmmmm]mmmmmmm]]]]]mmmmmmmm]mmmmmmmmmmmmm]]]]]]mmmmmmmmmm]mmmmm]mmmmmm]]mm]]mmmmmmmmmmmmmmmmm]]mmmmmmmmmmmmmmm]]]mmmmmmm]mmmmmmmmmmmmmmmmmmmmm]mmmmmmmmmmmmmmmmmmmmm]]mmmmmmmm]

1-11-11-11-1-11111--1-11111-11--111111 111111-1111 11111111-11111-11111-1111111-1111111111111111111111111111111111111111111/4/4///4444////4444444444////44/4/////444/4////444//4////44444444/4//////444/4444///////4444444/4//////44444/////////////////////////4//////////444//444//////444//////444////// " KOKKKOKOOOOOOKOKOKKKKKOKOOOOOKOOOOKOKKKKKOKOOOOOOOOOKOKOKKKKKOKOOOOOOOOOOOKKOKKKKOKOKOOOOOKOOOKOKKKKKKOOOOOOOOOKOKKKKOOOOOKKKKOKKOOOOOKKKKKOOOOKKKKOOOKKKKKOOOKKKKKOKKKKKKOOOKKKKKKOOOKKKKKOKKKKKKOOOOKKKKOOOOKKKKKOOOOOOKKKKOOOOOOOOOOOOKKKKOOOOOOOOOKKKKKOOOOOOOO [32[3[[[3[32[33333[32[[3[[[32[333333232[32[3[3[[[3233333222[[[[[[[33333333322232[[[[[32[333332[32222[3[3[[333322222[[[[33332222[[[3222[[[[[[ 2222[[[[[[ 222[[[[[[[322[[[[[[[3322[[[33332[[3[333332[[[3[3333[33333[[[33333[[[333333[[3[[[[[3333332222[32[[[[33332222[[[333222[[[3332222mm]mm]m]]m]mm]mmmmm]mmmm]mm]mmmmm]mm]mmmmmmmmmmmmmmm]mmmmmmmmmmmmmm]]mm]mmmmmmmmmmmmmmmmmm]mmmmmmmmmmmmmm]]]mm]mmmmmmmmm]mmmmmmmmmmmmmmmmmmmmmmmm]]]]mmmmmm]mmmmmmmmm]mmmmm]mmmmm]]]]mmmmmmmmmmmmmmmmm]mmm]]]mmmmmmmm]mmmmmmmm]]mmmmmm]mmmmmmmmm]]]mmmmmmm]]mmmmmmmmmmmmmmm]]]]

222222222222222222222222222222222222222222222222222222222222222222222222222222222222""""""" KOKOKOKOKOOKKKOKKKKKOOOOOOOKKKKKKKOOOOOKOOOOOKKKKKOOOOOOOKOKKKKKKOOOOOOOOOKKKKKOOOOOOOOKKKKKKOOOOOOKOKKKKKKKOOOOOKKKKKKKOOOOOOKKOKKKKOOOKKKKKKOOOOKOKKKKKOOOOOKKKKKKKKOOOKKKKKKKKOOOKKKKKKKKKKOOOKKKKKOOOKKKKOOOOKKKKOOOOO [5[[[5555[5[5[[[555[55[[[55[555[[[[[[5[55[55[[[55555[[[555555[[555555[[[[55555[5[[[[[[[[[[[[[[55[[[[[[[555[[5555555[5555555[5555[[555[[[[[[555[[[[[[5[[[[[[555[[[[[[5[ 11111111111111111111111111111 mm]mm]mm]mmmm]m]mmmmmmmmmmmmmmmmmmm]mmm]mmmmmmmmmmm]]]mmmmmmmmmmmmmmmmm]mm]mmmmmmmmmm]mmmmmm]]]]mm]mmmmmmmmmmmmmmmmm]mmmmmmmmmm]]mmmmmmmmmm]mmmmmmmmmmmmmmmm]mmmmmm]]]mm]mmmmmmmmmmmmmmmmmmmmmm]]]]]mmmmmmmmmmmmmmmmmmm]]]]mmmmmmmmmmmmmmmm]]]]]

222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222"""""""""""""""""""""""""""""""""""""""""""""" KOKKKKKOKOOOOOKOKOKKKKOOOOOOKOKKKKKKOOOOOOOOKKKKKOKOOOOKOOOOKKOOOOOOOKKKKOOOOOOOKKKKKKOOOOOKKKKKKKOOKOKKKKKKKKOOOKKKKKKKKKOOOOKKKKKKKKKOOOOOKKKKKKKKKOOOKKKKKKKKKKKKKKKKKKOOOKKKKOKKKOOOOKKOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO [55[[[5[5[5555[5[5[[[5[[55555[5[[[5[5[[5555[[[5[[555555[[[55[5[5[[5[[[55[[[5[[[5555555[[[5555555[[[5555555[[[[55555555[5[[[5555[555555[[[5[[[555[[[[5555[[[55555555[[[5555555[[555555555555555555[[[[[ 111111111111111111111111111111111 mm]mm]mmmmmm]mmmmm]mm]mm]mmmmm]mm]mmmmmmmmmmmmmmmmmmm]mmmmmmm]]]mm]]mmmmmmmm]mmmmmmmm]mmmmmmmmmmmm]]]]]mmmmmmmmmmmmmm]]]]]]mmmmmmmmmmmmmmm]mmmmmmmmmm]]]]]]mmmmmmmmmmmmmmmmmmm]]]]]]mmmmmmmmmmmmmm]]]]]mmm]mmm]]mmmmmm]]mmmmmmmmmmm]]]]]

11111111111111111111111111111111"""""""""""""""""" KOKOKKKKOOOOOKKKKKKOKOOOOOOKKOKOOOOOOOKOKOOOOOOOOOOOOKKKOOOOOOOOKKKKOKOOOOOKKKKKKKKOOOKKKKKKKKOOOOOKKKKKKKKKOOOOKKKKKKKOOOOOKKKKKKKOKOKKKKKKKKOOKKKKKKKKKOOOOOOKKKKKKOOOOOOOOKKOOOOOOOKOOOOOOOOOOOOO [25[25[25[[[2522[25225525[[[[2[2522225[2[22555255[25[[[[[25222225[2225555[[25[[[[2222222255555[2[[[[[25[25252222225222555[25[2[[[[2522222255[2[[225222525225222225252222222555555[22222225552555222222[25[2555222252[22255555555522222225555[2222225555[[2255[[[[2222255[[[[252222555[[[[222255555[[[[[[[25222255555555[[[[[[[[[[[[ mm]mm]mmmmm]mm]mm]mm]m]mmmmmmmmmmmmmmmmm]mmmmmm]mmmmmmmmm]mmm]]]]]]mmmmmmmmm]mmmmmmmmmmmmmmmmmmm]]]]m]]mmmmmmmmmmmmmmmmm]m]mmmmmmmmmm]]]]]mmmmmm]mmmmmmmmmmmmmmmmm]]]mm]mmmmmmmmmmmmmmmm]]mm]mmmmmmmmmmmmmmmm]]mmmmm]mm]mmmmm]]]]]

1" KO

[25mm]

1-1/4" KO

[32mm]

2" KO

[51 mm]

1-1/4" KO

[32mm]

2" KO

[51 mm]

1-1/2" KO

[38mm]

1" KO

[25mm]

1-1/2" KO

[38mm]

3/4" KO

[19.1mm]

3/4" KO

[19.1mm]

1-1/2" KO

[38mm]

RFBA10R55OG

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 8

RFBA Series Rectangular Activation Floor Boxes

Resource RFBA Series Floor Boxes Accessories Ordering Information RFBAB Blank Device Plate – Closes off unused gangs.

RFBAS2 1.59” Single Device Plate -

Receptacle opening 1 9/16” (40mm)

RFBADP Duplex Device Plate - Accepts standard 15 Amp & 20 Amp Duplex Receptacles.

RFBADEC Decorator Device Plate - Accepts Decorator Style Receptacles, Communication or A/V Devices.

RFBA6A Communications Plate – Accepts bezels for common communications devices. Including TracJack, Series II, Keystone, Lucent

RFBAAAP AAP Device Plate - Accepts Extron® Electronics AAP devices (sold separately)

1.39” Single Device Plate - Receptacle opening 1 3/8” (35mm)

RFBAMAAP MAAP Device Plate - Accepts two (2) Legrand AVIP or Extron® Electronics MAAP Series Devices (sold separately)

RFBADP20TR Duplex Device Plate - Pre-wired with tamper-resistant 20 Amp PlugTail receptacle. Receptacle available in black or white.

RFBADEC20TR Duplex Device Plate - Pre-wired with tamper-resistant 20 Amp PlugTail receptacle. Receptacle available in black or white.

RFBAS1

Device Mounting Plate - Accepts 4 jacks of data and includes removable label holder and labels

RFBADJ4LB

RFBA10-2G 2-Gang Adapter Plate for 10-Gang Box

RFBA10-3G 3-Gang Adapter Plate -for 10-Gang Box

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 9

RFBA Series Rectangular Activation Floor Boxes

Resource RFBA Series Floor Boxes Accessories Ordering Information

RFBA24R05EXT Rectangular 1/2"Collar - Extends 0.5" above surface of box.

RFBA610R4EXT 4" Rectangular Extension Ring for 6/10-Gang Boxes - Used to extend height of floor box. Cut to desired level after concrete pour. To be used with flanged FloorPort covers only.

FPCTKIT Break-Away Screw - Four (4) break-away screws used to mount flanged FloorPort covers on deeper pours

RFBA24R4EXT Rectangular Extension Ring for 2 and 4-Gang Boxes - Used to extend height of floor box. Cut to desired level after concrete pour. To be used with flanged FloorPort covers only.

RFBA24FF Furniture Feed Barrier Kit for 2 and 4-Gang Boxes – Used to separate power and communication services.

Used in combination with FloorPort Furniture Feed Covers (FPFFTC).

Covers sold separately

2HUB 2" Conduit Transition Hub - Trade size 2" die cast zinc conduit fitting allows for 2" conduit to transition into a shallow box design. Includes:

die cast fitting, gasket, and mounting screws.

FP-CTR Bare Concrete & Terrazzo Ring – Nonmetallic ring for use on bare polished concrete and terrazzo floor applications.

Note: FP-CTR is compatible with 2 and 4-gang boxes only.

DannyNguyenPham

RFBA Series Rectangular Activation Floor Boxes

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremoldd ©2025 Legrand All Rights Reserved

Legrand, North America 60 Woodlawn Street West Hartford, CT 06110 877-295-3472 www.legrand.us Canada 844-977-3783 www.legrand.ca

FOLLOW US

Large FloorPort Series Covers for 6 and 10-gang RFBA Floor Boxes

FPL TC NKB

Large FloorPort Cover

Blank Top B Cutout Top C

Tile/Carpet (Flanged) TC

Nickel NK Brass BS Black BK

Bronze BZ Gray GY Brushed Aluminum AL

FLOORPORT PART NUMBER CONFIGURATOR

FPLCTCBK

FPLCTCBZ

FPLCTCBS

FPLCTCNK

FPLCTCAL

FPLCTCGY

Large Cutout Cover Assembly – Flanged cover for us in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Insert in lid allows for carpet or tile cutouts to match finished floor.

For use with 6 and 10-gang RFBA floor boxes.

Large FloorPort Series Flanged Covers Ordering Information

FPLBTCBK

FPLBTCBZ

FPLBTCBS

FPLBTCNK

FPLBTCAL

FPLBTCGY

Large Blank Cover Assembly – Flanged cover for us in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Lid area is flush with the finished floor, no cutouts provided.

For use with 6 and 10-gang RFBA floor boxes.

FPLCTCBKTR

FPLCTCBZTR

FPLCTCBSTR

FPLCTCNKTR

FPLCTCALTR

FPLCTCGYTR

Large Tamper-Resistant Cutout Cover Assembly – Flanged tamper-resistant cover for us in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Insert in lid allows for carpet or tile cutouts to match finished floor.

For use with 6 and 10-gang RFBA floor boxes.

FPLBTCBKTR

FPLBTCBZTR

FPLBTCBSTR

FPLBTCNKTR

FPLBTCALTR

FPLBTCGYTR

Large Tamper-Resistant Blank Cover Assembly - Flanged tamper-resistant cover for us in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Lid area is flush with the finished floor, no cutouts provided.

For use with 6 and 10-gang RFBA floor boxes.

Note: Add "TR" to end of part number to indicate tamper-resistant cover.

NOTE: All brand and product names referenced in this document are registered trademarks or trademarks of their respective holders.

FPLCTCALTR

DannyNguyenPham

RFBA2R, RFBA4R, RFBA6R, RFBA10R

RFBA Series of Floor Boxes are versatile recessed activation solutions that provide power, communication and/or audio/video services to open space areas, or directly to workstations. The floor boxes come in various sizes and depths, including 2, 4, 6 and 10-gangs to best fit your specific application. The boxes utilize FloorPort series covers and can be installed in carpet, wood, tile and polished concrete floor coverings. An optional terrazzo ring is available for the 2 and 4-gang boxes for use with bare concrete and terrazzo applications. The RFBA series is designed with improved wire and cable routing, allowing for easier wire pulling in adjacent compartments and around corners.

Compliance

WIREMOLD®

RFBA Series Rectangular Activation Floor Boxes cULus Listed: Metallic Outlet Boxes for tile, terrazzo, carpet and wood floors.

File E2961 Guide QCIT

Features & Benefits

• Suitable for Various Applications. Steel and on-grade

(epoxy coated) to meet your specific installation requirements with support for installation in carpet, wood flooring, tile, terrazzo and polished concrete..

• Various Gang and Depth Options Available. Various Gang and Depth Options Available. Choose from either 2, 4, 6 or 10-gang boxes to fit your application. The 2 and 4-gang options are available in either a shallow (2.5") depth or standard (3.0") depth box..

• Common Mounting Plates. All models share the same mounting plates, allowing for easier configuration and specification.

• Numerous Conduit Knockouts. Features knockouts on all sides and bottom of box to allow for greater installation flexibility to work within your environment..

• FloorPort Activation Covers. Provides TopGuard protection from water, dirt and debris plus added strength and durability. Available in brushed aluminum and five decorative powder coat finishes: Black, Brass, Nickel, Gray and Bronze.

• Improved Cable Management. Internal compartments feature improved wire and cable routing for easier wire pulling in adjacent compartments and around corners.

• Post-Pour Features: Allows for adjustment post-pour and features removable dividers that can be installed or removed before or after the concrete pour.

The RFBA floor box is built for multiple applications and environments

Interior compartment of box features rounded corners for improved cable routing

All models share eight (8) common device plates, allowing for data and power within the same box

Rectangular extension ring can be used to extend height of box up to 4 inches

DannyNguyenPham

RFBA Series Rectangular Activation Floor Boxes

2-Gang RFBA Floor Box, Shallow 2.5” Depth – Steel floor box designed for above grade installations. Features 2-gangs of box capacity with 3” available behind plates. When ordering device plates for box, 2 blank device plates (Cat. No. RFBAB) must also be ordered to seal off wire and cable routing passageways. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 2.5”. If using the collar, pour should be 3”.

Sold Separately:

• FloorPort Covers • Device Plates

2-Gang RFBA On-Grade Floor Box, Shallow 2.5” Depth – Steel floor box designed for on-grade installations with a fusion-bonded epoxy for use on metal reinforcement bar and related accessories before encapsulating in concrete. Features 2-gangs of box capacity with 3” available behind plates.

When ordering device plates for box, 2 blank device plates (Cat. No. RFBAB) must also be ordered to seal off wire and cable routing passageways. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo, and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 2.5”. If using the collar, pour should be 3”.

Sold Separately:

• FloorPort Covers • Device Plates

Resource RFBA Series Floor Boxes with Rectangular Activations Ordering Information

RFBA2R25OG

RFBA2R25

RFBA Series Floor Boxes with Rectangular Activations Selection Guide Box Model Box Type Box Capacity Box Depth Conduit Size Cover Type

RFBA2R25 Above Grade 2-Gang 2.5" ¾” – 1 ¼" FloorPort

RFBA2R25OG On-Grade 2-Gang 2.5" ¾” – 1 ¼" FloorPort

RFBA2R30 Above Grade 2-Gang 3.0" ¾” – 2"* FloorPort

RFBA2R30OG On-Grade 2-Gang 3.0" ¾” – 2"* FloorPort

RFBA4R25 Above Grade 4-Gang 2.5" ¾” – 1 ½" FloorPort

RFBA4R25OG On-Grade 4-Gang 2.5" ¾” – 1 ½" FloorPort

RFBA4R30 Above Grade 4-Gang 3.0" ¾” – 2"* FloorPort

RFBA4R30OG On-Grade 4-Gang 3.0" ¾” – 2"* FloorPort

RFBA6R30 Above Grade 6-Gang 3.0" ¾” – 2"* Large FloorPort

RFBA6R30OG On-Grade 6-Gang 3.0" ¾” – 2"* Large FloorPort

RFBA10R55 Above Grade 10-Gang 5.5" ¾” – 2" Large FloorPort

RFBA10R55OG On-Grade 10-Gang 5.5" ¾” – 2" Large FloorPort

Dimensions:

3/4" KO

1-1/4" KO 3/4" KO

1" KO

3/4" KO

1-1/4" KO

14" [356mm]

17-3/4” [452mm]

2-1/2” [64mm]

3” [76mm]

8-9/16” [217mm]

* Additional 2HUB accessory is needed on the 2, 4 and 6-gang boxes if using a 2” conduit feed to the box. Largest knockout without the 2HUB accessory on the 2, 4 and 6-gang boxes is 1 ¼”.

1" KO

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 5

RFBA Series Rectangular Activation Floor Boxes

4-Gang RFBA Floor Box, Standard 3.0” Depth – Steel floor box designed for above grade installations Features 4-gangs of box capacity with at least 2 ¾” available behind device plates. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 3”. If using the collar, pour should be 3.5”.

Sold Separately:

• FloorPort Covers

• Device Plates

4-Gang RFBA On-Grade Floor Box, Standard 3.0” Depth – Steel floor box designed for on- grade installations with a fusion-bonded epoxy for use on metal reinforcement bar and related accessories before encapsulating in concrete. Features 4-gangs of box capacity with at least 2 ¾” available behind device plates. Fully adjustable before and after concrete pour. Designed for carpet, wood flooring, tile, terrazzo, and polished concrete applications.

Concrete Pour: Minimum concrete pour without collar is 3”. If using the collar, pour should be 3.5”.

Sold Separately:

• FloorPort Covers

• Device Plates

Resource RFBA Series Floor Boxes with Rectangular Activations Ordering Information

RFBA4R30OG

RFBA4R30

Dimensions:

[303mm] 11-15/16"

[452mm]

3-1/2" [89mm]

3" [76mm]

14" [356mm]

17-3/4"

1" KO

Concentric

3/4" & 1-1/4" KO

Removable Plate for 2Hub Conduit Adapter

1-1/4" KO

3/4" KO

1-1/2" KO

3/4" KO

1-1/4" KO

1-1/4" KO

3/4" KO

3/4" KO

1-1/4" KO

3/4" KO

1-1/2" KO

RFBA4R30OG

DannyNguyenPham

RFBA Series Rectangular Activation Floor Boxes

Resource RFBA Series Floor Boxes Accessories Ordering Information RFBAB Blank Device Plate – Closes off unused gangs.

RFBAS2 1.59” Single Device Plate -

Receptacle opening 1 9/16” (40mm)

RFBADP Duplex Device Plate - Accepts standard 15 Amp & 20 Amp Duplex Receptacles.

RFBADEC Decorator Device Plate - Accepts Decorator Style Receptacles, Communication or A/V Devices.

RFBA6A Communications Plate – Accepts bezels for common communications devices. Including TracJack, Series II, Keystone, Lucent

RFBAAAP AAP Device Plate - Accepts Extron® Electronics AAP devices (sold separately)

1.39” Single Device Plate - Receptacle opening 1 3/8” (35mm)

RFBAMAAP MAAP Device Plate - Accepts two (2) Legrand AVIP or Extron® Electronics MAAP Series Devices (sold separately)

RFBADP20TR Duplex Device Plate - Pre-wired with tamper-resistant 20 Amp PlugTail receptacle. Receptacle available in black or white.

RFBADEC20TR Duplex Device Plate - Pre-wired with tamper-resistant 20 Amp PlugTail receptacle. Receptacle available in black or white.

RFBAS1

Device Mounting Plate - Accepts 4 jacks of data and includes removable label holder and labels

RFBADJ4LB

RFBA10-2G 2-Gang Adapter Plate for 10-Gang Box

RFBA10-3G 3-Gang Adapter Plate -for 10-Gang Box

DannyNguyenPham

RFBA Series Rectangular Activation Floor Boxes

Resource RFBA Series Floor Boxes Accessories Ordering Information

RFBA24R05EXT Rectangular 1/2"Collar - Extends 0.5" above surface of box.

RFBA610R4EXT 4" Rectangular Extension Ring for 6/10-Gang Boxes - Used to extend height of floor box. Cut to desired level after concrete pour. To be used with flanged FloorPort covers only.

FPCTKIT Break-Away Screw - Four (4) break-away screws used to mount flanged FloorPort covers on deeper pours

RFBA24R4EXT Rectangular Extension Ring for 2 and 4-Gang Boxes - Used to extend height of floor box. Cut to desired level after concrete pour. To be used with flanged FloorPort covers only.

RFBA24FF Furniture Feed Barrier Kit for 2 and 4-Gang Boxes – Used to separate power and communication services.

Used in combination with FloorPort Furniture Feed Covers (FPFFTC).

Covers sold separately

2HUB 2" Conduit Transition Hub - Trade size 2" die cast zinc conduit fitting allows for 2" conduit to transition into a shallow box design. Includes:

die cast fitting, gasket, and mounting screws.

FP-CTR Bare Concrete & Terrazzo Ring – Nonmetallic ring for use on bare polished concrete and terrazzo floor applications.

Note: FP-CTR is compatible with 2 and 4-gang boxes only.

DannyNguyenPham

CS3122 — Updated April 2025 — For latest specs visit www.legrand.us/wiremold 10

RFBA Series Rectangular Activation Floor Boxes

FloorPort Series Covers for 2 and 4-gang RFBA Floor Boxes

FP TC NKB

FloorPort Cover

Blank Top B Cutout Top C Furniture Feed FF

Tile (Flangeless) T

Black BK

Bronze BZ Gray GY Brushed Aluminum AL

FLOORPORT PART NUMBER CONFIGURATOR

NOTE: Pricing varies depending on country of origin. Consult your local sales representative for more information.

FPCTCBK

FPCTCBZ

FPCTCBS

FPCTCNK

FPCTCAL

FPCTCGY

Cutout Cover Assembly – Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Insert in lid allows for carpet or tile cutouts to match finished floor.

FloorPort Series Flanged Cover Assemblies Ordering Information

FPBTCBK

FPBTCBZ

FPBTCBS

FPBTCNK

FPBTCAL

FPBTCGY

Blank Cover Assembly – Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Lid area is flush with the finished floor, no cutouts provided.

FPFFTCBK

FPFFTCBZ

FPFFTCBS

FPFFTCNK

FPFFTCAL

FPFFTCGY

Furniture Feed Cover Assembly – Flanged cover for use in tile or carpet installation. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY), or brushed aluminum (AL). Provided with one 1" trade size screw plug for power or communication type cabling and one combination 1 1/4" and 2" trade size screw plug for communication type cabling. Allows for feeding both power and communication cabling.

NOTE: Add "TR" to end of part number to indicate tamper-resistant cover. Not available with Furniture Feed cover.

FPCTCBKTR

FPCTCBZTR

FPCTCBSTR

FPCTCNKTR

FPCTCALTR

FPCTCGYTR

Cutout Tamper-Resistant Cover Assembly - Flanged cover for use in tile or carpet installation. Features tamper-resistant screw to limit unauthorized personnel. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY) or brushed aluminum (AL). Insert in lid allows for carpet or tile cutouts to match finished floor.

FPBTCBKTR

FPBTCBZTR

FPBTCBSTR

FPBTCNKTR

FPBTCALTR

FPBTCGYTR

Blank Tamper-Resistant Cover Assembly - Flanged cover for use in tile or carpet installation. Features tamper-resistant screw to limit unauthorized personnel. Die-cast aluminum assembly available in black (BK), bronze (BZ), brass (BS), nickel (NK), gray (GY) or brushed aluminum (AL). Lid area is flush with the finished floor, no cutouts provided.

FPCTCALTR

DannyNguyenPham

Evolution™ Series – 4/5 Gang Floor Box Evolution™ Series Floor Boxes – The most complete and innovative line of floor boxes, just expanded with the Evolution Series 4- and 5-gang floor box.

In addition to a unique design that allows the same floor box to be used in multiple floor applications, high capacity and multi-functional capabilities make Evolution Series Floor Boxes ideal for areas where A/V, power and communication services are needed. Evolution Series Floor Boxes are an ideal option for installations where services are constantly evolving, such as commercial offices, conference rooms, stages, and entertainment venues.

WIREMOLD®

Evolution™ Series Floor Boxes

Features & Benefits

• Evolution Series Floor Boxes are designed to work in concrete, raised and wood floor applications and are fully adjustable both pre- and post-concrete pour.

• Configurable with removable modules.

Modules are removable through the top or back of the floor box. This allows for easier installations and facilitates moves, adds and changes without having to disconnect services, saving time and money.

• Audio/Video Design.

Evolution Series Floor Boxes have been developed specifically with the A/V industry in mind. With 3 1/2" (89mm) of wiring capacity behind each device plate, these boxes will accept devices from leading A/V manufacturers including Legrand AVIP, Extron Electronics and Crestron..

• Durable 180° articulating hinge. Hinge design enables covers to open a full 180° and lie flat on the floor surface with the durability to support a large cover. Provides easy access to all interior modules and activations while reducing tripping hazards.

New Evolution Series Floor Boxes provide increased capacity options and a variety of innovations not available in any other floor boxes.

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 1

Raised Floors Concrete Floors Wood Floors

Note: If used in concrete, concrete leveling legs need to be purchased separately for all non-OG boxes.

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 2

Evolution™ Series 4/5 Gang Floor Boxes

• Multiple size knockouts.

All Evolution Series Floor Boxes are available with multiple trade size knockouts ranging in size from 3/4" to 2" allowing for multiple activations and wiring configurations.

• Die cast aluminum cover assemblies.

Evolution Series

Floor Box Covers have been designed to work on multiple floor surfaces and are manufactured from die cast aluminum to provide strength and style. Available in the following powder coated finishes: black, gray, bronze, and durable finishes: brushed aluminum, satin brass, and satin nickel..

• Cable Management.

Allows multiple cables to be organized and controlled for easier cable egress.

• Finished interior.

Fully finished interior removes the unfinished industrial look while increasing visibility, making it easier to see where to plug in devices.

• Accepts standard size wall plates.

Evolution Series Floor Boxes accept industry standard single-, double- and triple-gang wall plates from industry leading manufacturers.

• Auto-close egress doors.

Cable egress doors lock in position when open, and automatically close around wires to protect cabling and reduce trip hazards.

• Bare (polished) concrete and terrazzo applications.

Evolution Series Floor Box has been designed to be installed into bare (polished) concrete and terrazzo floors.

• Suitable for use in air handling spaces.

In accordance with Sec 300-22(c) of the National

Electric Code.

• Meets ADA Accessibility Guidelines.

Trim flange is designed to meet the ADA Accessibility

Guidelines as it pertains to ADA Standard 4.5, which addresses the change in floor and ground surface levels. • TopGuardTM Protection.

Evolution Series Floor Box covers meet and exceed UL scrub water exclusion requirements for tile, carpet, wood, bare concrete and terrazzo floor coverings.

Features & Benefits

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 4

Evolution™ Series 4/5 Gang Floor Boxes

Catalog No./Item Description/Specifications

EFB45S-OG 4-Gang Floor Box – has been designed to be installed in both on-grade and above grade concrete floor applications. Box has an epoxy coating that allows the box to be placed in on-grade applications without the need for additional vapor barriers. Designed to work with standard size wall plates. Box comes complete with all components needed for initial installation. Custom options are available upon request.

EFB45S-OG Depth Behind Plates

8 7/16" (214mm)12 1/8"

(308mm)

5 7/8" (149mm)

NOTE: When used on bare (polished) concrete or terrazzo floors EFB45-CTR must be used.

(Sold separately.)

Items not included with the box and sold separately:

• Receptacles

• Communication Jacks

• A/V Devices

• Device plates

EFB45S-OG Knockout Locations & Sizes

EFB45S-OG Exploded View A

B

C

D

Components Included:

A Protective/Disposable Cover B One (1) Removable Module C Two (2) Cable Management Guides D Two (2) Leveling Support Legs for concrete applications E Trade Size Knockouts ranging in size from 1" to 2" trade size

Each Module Consists of:

• One (1) EFB8-MB Mounting Bracket

• One (1) Back Plate

• One (1) EFB810-DIV Divider

Two (2) KOs:

Outer: 2" Trade Size KO Inner: 1" Trade Size KO One (1) KO:

1" Trade Size KO

One (1) KO:

1" Trade Size KO3 1/2"

(89mm)

One (1) 1 1/4" Trade Size KO

Country of Origin: Mexico

Evolution Series EFB45 Floor Box Ordering Information

Four (4) 1" Trade Size KOs

EFB45S-OG

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 5

EFB10-MB Mounting Bracket – Holds up to five (5) devices for power, communications or audio/video.

Bracket accepts EFB10 Series device plates (2 1/32" x 4 5/8") (58mm x 117mm) and 5507 Series device plates. Sold separately.

EFB10-23GMB Mounting Bracket – Equipped with one 2-gang standard size device opening and one 3-gang standard size device opening.

Accepts a standard 2-gang (4 9/16" x 4 1/2" (116mm x 114mm)) and a 3-gang (6 3/8" x 4 1/2" (162mm x 114mm)) device plate. Ideal for 2-gang A/V devices such as Crestron® 2-gang and 3-gang digital media devices.

Device plates and devices supplied by others.

EFB10-5GMB Mounting Bracket – Holds a standard 5-gang device plate Device plate dimensions: 9 9/16" x 4 1/2" (243mm x 114mm).

EFB10-B Blank Device Plate – Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm).

EFB10-DP Duplex Device Plate – Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm). Includes receptacle spacers.

EFB8-MB Mounting Bracket – Holds up to four (4) devices for power, communications or audio/video.

Bracket accepts standard size (2 3/4" x 4 1/2" (70mm x 114mm)) device plates sold separately by others.

EFB8-22GMB Mounting Bracket – Equipped with two (2) 2-gang standard size device openings for a standard 2-gang (4 9/16" x 4 1/2" (116mm x 114mm)). Ideal for 2-gang A/V devices such as Crestron® 2-gang digital media devices. Device plates and devices supplied by others.

EFB8-4GMB Mounting Bracket – Holds a standard 4-gang device plate.

Device plate dimensions: 8 3/16" x 4 1/2" (208mm x 114mm).

EFB-AAP Device Plate – Holds two (2) Extron

Electronics AAP devices.

Device plate dimensions: 2 3/4" x 4 1/2" (70mm x 114mm).

EFB-MAAP Device Plate – Holds four (4) Legrand AVIP or Extron Electronics MAAP devices.

Device plate dimensions: 2 3/4" x 4 1/2" (70mm x 114mm).

EFB-MOS Device Plate – European device plate accepts up to (45mm x 67.5mm) Arteor device. Device plate dimensions: 2 3/4" x 4 1/2" (70mm x 114mm).

EFB-B Blank Device Plate – Device plate dimensions: 2 3/4" x 4 1/2" (70mm x 114mm).

NOTE: Not designed to accept adorne style devices.

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Evolution Series EFB45 Floor Box Accessories Ordering Information

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 6

EFB10-DEC Decorator Style Device Plate – For use with decorator style receptacles, GFCI receptacle, and decorator style audio/video devices. Device plate dimensions:

2 5/16" x 4 5/8" (58mm x 118mm).

Includes receptacle spacers.

EFB10-S1 Single Receptacle Plate – Single receptacle 1 3/8" (35mm) diameter. Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm). Includes

EFB10-S2 Single Receptacle Plate – Single receptacle 1 9/16" (40mm) diameter. Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm). Includes

EFB10-6AB Device Plate – Accepts up to three (3) dual Wiremold Open System CM2 Series communication adapters.

Adapters sold separately. Device plate dimensions: 2 5/16" x 4 5/8"

EFB10-3S2 Device Plate – Accepts up to three (3) Ortronics® Series II devices. Ortronics® devices sold separately. Device plate dimensions: 2 5/16" x 4 5/8"

EFB10-2C Device Plate – Accepts one dual Wiremold Open System adapter, or one Ortronics® Series II adapter, or one Ortronics® TracJack adapter. Adapters sold separately. Device plate

EFB10-AAP Device Plate – holds two (2) Extron Electronics AAP devices.

Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm).

EFB10-MAAP Device Plate – holds four (4) Legrand AVIP or Extron Electronics MAAP devices.

Device plate dimensions: 2 5/16" x 4 5/8" (58mm x 118mm).

EFB10-MOS Device Plate – (45mm x 67.5mm) device plate. Device plate

5507B-WH Blank Faceplate – For covering unused compartments in the device bracket.

5507D-WH Duplex Receptacle Faceplate – For covering duplex style devices.

Accepts 106 frame.

5507R-WH Rectangular Receptacle Faceplate – For covering rectangular decorator style devices.

NOTE: Not designed to work with adorne devices.

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Evolution Series EFB45 Floor Box Accessories Ordering Information

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 7

5507S-WH Rectangular Spacer – For mounting commercial device plates. Installs between the device bracket and a device.

5507T1-WH Single Receptacle Faceplate – For covering single receptacles – 1 9/16" (40mm) in diameter.

5507T2-WH Single Receptacle Faceplate – For covering single receptacles – 1 3/8" (35mm) in diameter.

55074TJ-WH Ortronics® Faceplate – For mounting Ortronics® datacom inserts. Accepts four (4) TracJack devices.

55076TJ-WH Ortronics® Faceplate – For mounting Ortronics® datacom inserts. Accepts six (6) TracJack devices.

EFB810-3/4-3/4 Knockout Plate – Has two (2) 3/4" trade size knockouts.

EFB810-3/4-11/4 Knockout Plate – Has one 3/4" and one 1 1/4" trade size knockout.

EFB810-2 Knockout Plate – Has one 2" trade size knockout.

EFB810-DIV Relocatable Divider – Provides separation of services. Includes one divider plate.

EFB45-CLL Concrete Leveling Legs – Legs allow floor box to be adjusted up or down to match the desired pour height of the concrete.

Includes two (2) leveling legs.

Threaded rod not supplied.

EFB45-CMG Cable Management Guides – Guides help organize and maintain cable position when opening and closing the cover.

EFB45-50A 50A Adapter – Allows for a 50A device to be installed on the Evolution Series 4- and 5-Gang Floor Boxes.

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: USA

Country of Origin: Mexico

Country of Origin: Mexico

Evolution Series EFB45 Floor Box Accessories Ordering Information

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 8

Flush Style Cover with Floor Insert – Low profile cover designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a durable hinge allowing the cover to rotate open 180°, a 1/4" deep recessed area to accept the finished floor covering, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The cover assemblies are designed to sit flush with the finished floors such as: carpet, tile, and wood. In order to make the cover assembly flush with the polished concrete or terrazzo floor the EFB45-CTR (concrete/terrazzo) ring must be used (ring sold separately).

Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), satin brass (SB), and satin nickel (SN)..

Solid Lid – Low profile cover designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a durable hinge which allows the cover to rotate open 180°, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The cover assemblies are designed to sit flush with the finished floors such as: carpet, tile, and wood. In order to make the cover assembly flush with the polished concrete or terrazzo floor the EFB45-CTR (concrete/terrazzo) ring must be used (ring sold separately). Available in the following powder coated finishes:

black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), satin brass (SB), and satin nickel (SN)..

Surface Style Cover with Floor Insert – Low profile cover designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a durable hinge allowing the cover to rotate open 180°, a 1/4" deep recessed area to accept the finished floor covering, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The flange has a beveled edge that meets ADA guidelines and reduces tripping hazards. These cover assemblies are designed to sit on top of finished floors such as: carpet, tile, wood, polished concrete, and terrazzo. Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), satin brass (SB), and satin nickel (SN).

Surface Style Cover With designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a durable hinge allowing the cover to rotate open 180°, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The flange has a beveled edge that meets ADA guidelines and reduces tripping hazards. These cover assemblies are designed to sit on top of finished floors such as:

carpet, tile, wood, polished concrete, and terrazzo. Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes:

brushed aluminum (AA), satin brass (SB), and satin nickel (SN).

NOTE: Depth of recess area in plate is 1/4" (6.35mm).

NOTE: Depth of recess area in plate is 1/4" (6.35mm).

13 7/8" (352mm) 9 7/8"

(251mm) 13 7/8"

(352mm) 9 7/8" (251mm)

13 7/8" (352mm) 9 7/8"

(251mm) 13 7/8" (352mm) 9 7/8"

(251mm)

Country of Origin: India

Country of Origin: India

Country of Origin: India

Country of Origin: India

Evolution Series EFB45 Floor Box Covers Ordering Information

Powder Coated:

EFB45CTCBK

EFB45CTCGY

EFB45CTCBZ

Durable Finishes:

EFB45CTCAA

EFB45CTCSB

EFB45CTCSN

Powder Coated:

EFB45BTCBK

EFB45BTCGY

EFB45BTCBZ

Durable Finishes:

EFB45BTCAA

EFB45BTCSB

EFB45BTCSN

Powder Coated:

EFB45CTBK

EFB45CTGY

EFB45CTBZ

Durable Finishes:

EFB45CTAA

EFB45CTSB

EFB45CTSN

Powder Coated:

EFB45BTBK

EFB45BTGY

EFB45BTBZ

Durable Finishes:

EFB45BTAA

EFB45BTSB

EFB45BTSN

DannyNguyenPham

CS3212 — Updated September 2023 — For latest specs visit www.legrand.us/wiremold 9

Solid Lid – Low profile cover designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a tamper-resistant screw to help keep out unauthorized personnel, a durable hinge which allows the cover to rotate open 180°, a 1/4" deep recessed area to accept the finished floor covering, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The flange has a beveled edge that meets ADA guidelines and reduces tripping hazards. These cover assemblies are designed to sit on top of the finished floors such as: carpet, tile, wood, polished concrete, and terrazzo. Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), satin brass (SB), and satin designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a tamper-resistant screw to help keep out unauthorized personnel, a durable hinge which allows the cover to rotate open 180°, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The cover assemblies are designed to sit flush with the finished floors such as: carpet, tile, and wood. In order to make the cover assembly flush with the polished concrete or terrazzo floor the EFB45-CTR (concrete/terrazzo) ring must be used (ring sold separately).

Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), Country of Origin: India

Country of Origin: India

13 7/8" (352mm) 9 7/8"

(251mm) 13 7/8"

(352mm) 9 7/8" (251mm)

13 7/8" (352mm) 9 7/8"

(251mm) 13 7/8"

(352mm) 9 7/8" (251mm)

Floor Insert – Low profile cover designed to attach to the EFB45S style floor boxes. Each cover is made of die cast aluminum and is equipped with a tamper-resistant screw to help keep out unauthorized personnel, a durable hinge which allows the cover to rotate open 180°, a 1/4" deep recessed area to accept the finished floor covering, and two (2) slide egress doors that lock in the open position and automatically close around the cables when the cover is closed. The flange has a beveled edge that meets ADA guidelines and reduces tripping hazards. These cover assemblies are designed to sit on top of the finished floors such as: carpet, tile, wood, polished concrete, and terrazzo. Available in the following powder coated finishes: black (BK), gray (GY), bronze (BZ), and durable finishes: brushed aluminum (AA), Floor Insert – Low profile cover designed to attach to the EFB45S style floor boxes.