EXHIBIT_D_-_Gate_Design.pdf

This file is a Gate Design specification document comprised of detailed engineering drawings and a photograph showing the design and construction requirements for an industrial gate system.

The document presents comprehensive technical specifications for a safety gate assembly featuring dual pivoting sections with yellow powder-coated tubular steel construction. Key design components include: OD tubing for the main frame with flanged plates for structural support; dial lock pinhole connections; hydraulic grease fittings; welded vertical joints; weather skirts; and concrete footer anchorage rated at 3 PSI. The gate includes support pipes anchored to concrete footers, pivot pipe assemblies with ball bearings, and safety features such as yellow paint coating on all components. Specific details address tubular welding standards (moisture-tight welds), cold-drawn sealer steel for all tubing, galvanized eye bolts with safety snaps, and installation procedures for securing the gate in the open position. The design incorporates a dual-swinging gate configuration with equal spacing and centers located 50 inches apart from port center to port center. The reference drawing designation is X-101. The photograph demonstrates a functional implementation of the gate design installed at ground level with concrete footer supports and dual yellow powder-coated sections spanning approximately 20 feet in width.