Exhibit 006 - Cash Pak Holes.pdf

PDF 225 KB Posted

Attached to
Cash PAK System Federal contract opportunity
Solicitation number
2031ZA23R00015
Issued by
Department of the Treasury Bureau of Engraving and Printing

About this file

Written by GovTribe AI ·

This government file provides specifications for air escape holes in cash pak systems. The document outlines requirements for hole diameter, which must be no larger than 6.35mm, or 1/4 inch. Hole placement is also specified, with a minimum spacing of 8.5 inches between holes and defined vertical and horizontal positioning.

The related federal contract opportunity is a solicitation issued by the Department of the Treasury Bureau of Engraving and Printing seeking proposals for a cash pak system. Details include the solicitation number, brief product description, and issuing agency. Proposers are advised to carefully review specifications for air hole requirements in manufacturing cash paks.

View the file

Other files for this federal contract opportunity

Other files attached to Cash PAK System, newest first.
File Type Posted
2031ZA23R00015 RFP Amendment 0001.pdf PDF
Exhibit 004 - Drawing 30083 Cash Pak of 16000 Notes.pdf PDF
Exhibit 021 Pictures of Cash PAK System.pdf PDF
Exhibit 012 - NIST.SP.800-53r4.pdf PDF
RFP 2031ZA23R00015 Cash PAK.pdf PDF
Attachment 004 75W-08.0-02 EHS Contractor Requirements.pdf PDF
Attachment 001 Non-Disclosure Agreement.pdf PDF
Exhibit 014- FIPS-PUB-199-final.pdf PDF
Exhibit 005 - BL-1301_Datasheet.pdf PDF
Attachment 005- 75W-08.0-04 Restricted Materials at WCF.pdf PDF
Attachment 007 site prep drawing.pdf PDF
Exhibit 002 - BestFlex Power BFP 1.5 and BFP 1.9 Conveyor System.pdf PDF
Attachment 008 - 75D-07.0-07 Restricted Materials at DCF.pdf PDF
Exhibit 010 - Cash-pak machine area.pdf PDF
Exhibit 018 - Cash-pak Drop Test.pdf PDF
Exhibit 009 FIT and BAT Test Plan.pdf PDF
Exhibit 003- Brick of 4000 Notes.pdf PDF
Exhibit 015 - DOJ Ref Mapping PIVCard Certificates to a Privileged Account Open Version.pdf PDF
Exhibit 017 - Unprinted Cashpak Label Layout Thermal Transfer Printer.pdf PDF
Exhibit 011 -TD P 85-01.xlsx XLSX spreadsheet
Attachment 006 - 75W-04.0-02 HotWorkPermits.pdf PDF
Attachment 003 - 75D-07.0-04 EHS Contractor Requirements for DCF.pdf PDF
Show all 22

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

Cash Pak Holes

Air escape holes are design to allow air removal during the heat exchange process while in the oven. The air holes shall be no larger than 6.35mm (1/4”) diameter.

The air holes need to be placed on the top face of the cash‐pak with a minimum of 8.5” (± .5”) apart from each other.

The following figures depict the right location of the air holes.

Air holes vertical position Air holes horizontal position

File details come from the government source that posted it. Updated .