ESBD_463589_1762528765449_576SG001 Addenda 2.pdf
PDF 149 KB Posted
- Attached to
- Request for Proposals for Statewide Environmental Consulting Services – Hazardous Materials
- Solicitation number
- 601CT0000005604
- Issued by
- Travis County, Austin City, Texas
About this file
This is Addendum No. 2 to a Request for Proposals issued by the Texas Department of Transportation (TxDOT) Environmental Affairs Division for Statewide Environmental Consulting Services – Hazardous Materials (Solicitation 601CT0000005604), dated November 7, 2025. The addendum addresses questions and clarifications submitted by prospective respondents regarding proposal submission requirements, qualifications, project documentation, and contract terms. Key response dates include a draft HUB Subcontracting Plan review deadline of noon on Wednesday, November 12, 2025, with final proposals due by noon on November 19, 2025. The addendum clarifies that respondents must acknowledge receipt of this addendum by attaching it as a PDF to their proposal cover page in Bonfire. Attachment 1 of the RFP, titled Information Resources and Security Requirements, is included at the end of this addendum and was previously unavailable to prospective bidders. The document confirms that TxDOT legal terms and conditions are not negotiable, though specific items related to work authorizations can be negotiated upon award of contract.
The addendum establishes mandatory compliance requirements for data security, information resources management, and cybersecurity standards. Respondents must implement appropriate safeguards for TxDOT data classified as Public, Sensitive, Confidential, or Regulated, with specific encryption, backup, and disaster recovery procedures required. All contractor-related entities accessing TxDOT systems or data must complete TxDOT-approved cybersecurity training and undergo background checks including federal and county criminal records verification, national criminal database searches, and sex offender registry checks. Contractors must execute Interconnection Security Agreements for any system interconnections and comply with DIR Security Controls Standards Catalog baselines, TX-RAMP authorization requirements, and applicable state and federal regulations including Texas Administrative Code and Texas Government Code provisions. The addendum also confirms that file submissions should follow specified naming conventions (e.g., 1PCS.pdf, 2TCL.pdf), with cost and HUB Subcontracting Plan documents submitted through Bonfire as instructed, and that a 26% good faith effort goal for HUB subcontracting applies, with failure to submit a signed HUB Subcontracting Plan resulting in immediate disqualification.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| ESBD_463589_1761923899804_576SG001 Addenda 1.pdf | ||
| ESBD_463589_1762962647169_576SG001 Addenda 3.pdf | ||
| ESBD_463589_1761048200496_ESBD ATTACHMENT 4.docx | DOCX document | |
| ESBD_463589_1761048125167_ESBD ATTACHMENT 2.docx | DOCX document | |
| ESBD_463589_1761048101775_ESBD ATTACHMENT 1.docx | DOCX document | |
| ESBD_463589_1761048227225_ESBD ATTACHMENT 5.docx | DOCX document | |
| ESBD_463589_1761047962702_FINAL SG RFP.pdf | ||
| ESBD_463589_1761048177304_ESBD ATTACHMENT 3.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
TEXAS DEPARTMENT OF TRANSPORTATION
ENVIRONMENTAL AFFAIRS DIVISION
ADDENDUM No. 2
DATE: 11/07/2025
SUBJECT: REQUEST FOR PROPOSALS FOR STATEWIDE ENVIRONMENTAL CONSULTING
SERVICES – HAZARDOUS MATERIALS
SOLICITATION: 601CT0000005604
ACKNOWLEDGEMENT
IN THE SUBMISSION OF THIS RESPONSE, RESPONDENT MUST ACKNOWLEDGE RECEIPT OF THIS
ADDENDUM; OTHERWISE, THIS RESPONSE MAY NOT BE GIVEN CONSIDERATION. RESPONDENT
MUST ACKNOWLEDGE RECEIPT BY ATTACHING THIS DOCUMENT VIA PDF TO YOUR PROPOSAL
COVER PAGE WHEN COMPLETING THE SUBMISSION FOR ATTACHMENT 1 IN BONFIRE.
SIGNED:
COMPANY AUTHORIZED SIGNATURE
COMPANY NAME
Questions / Responses Question 1: Can you please share what firms are currently holding this contract vehicle? How much work was authorized under the contract in the last two years?
Response 1: ENV list of current consultants can be downloaded on Scientific services contracts - requests for proposal; select the link for TxDOT Environmental Affairs contracts. Requests beyond the information posted on the TxDOT website require an Open Records Request. Firms may do so utilizing the following link https://www.txdot.gov/about/contact-us/submit-an-open-records-request.html
Question 2: Regarding Appendix 2 – Team Qualifications (Items 1, 4, 5, and 6), the narratives in the Appendix do not indicate that projects must be associated with a specific regulatory program, such as TCEQ. However, the accompanying Word response templates include a field for “TCEQ ID #” within the project description. Could you please confirm whether the TCEQ ID # is required for all project examples in these categories, or should it be included only when applicable to the projects being described?
Response 2: ISAs won’t have a TCEQ ID so one does not need to be listed; if you have a TCEQ ID for Contamination/Waste and Third Party Oversight then list it and attach the documentation. There will be a TCEQ ID for UST Releases and APARs so those must be listed and documentation provided.
Question 3: Is it acceptable to list retired TxDOT Project Managers as client contacts/references for TxDOT projects that will be included in our response?
Response 3: For TxDOT Project Managers no longer with TxDOT firms may list the district POC or Deborah
Nixon for the client contact.
Question 4: Will TxDOT review comments to legal terms and conditions? If so, when in the RFP process should such comments be submitted (e.g. during proposal stage or after tentative award)?
Response 4: TxDOT Legal terms and conditions are not negotiated.
Question 5: The RFP and General Provisions reference an Attachment I – Information Resources and
Security Requirements but there does not appear to be an Attachment I included in the RFP. May we please have a copy of Attachment I?
Response 5: See Attachment I Information Resources and Security Requirements at the end of this document
Question 6: Page 5, 3. Submission Requirements, 3.4 Complete forms and qualifications outside of Bonfire, save as pdf files (specified file name in the footer of each document), and upload documents where instructed. Please clarify that we leave footers as is on each document (with the addition of the page number) and confirm exactly what you would like each file named? (for example are you looking for - 1PCS.pdf, 2TCL.pdf, 3PMQ.pdf, 4PGQ.pdf, 5FTE.pdf). Please clarify how you would like the costing and HUB identified.
https://www.txdot.gov/business/scientific-services-contracts-rfp.html https://www.txdot.gov/business/scientific-services-contracts-rfp.html https://www.txdot.gov/about/contact-us/submit-an-open-records-request.html https://www.txdot.gov/about/contact-us/submit-an-open-records-request.html
Response 6: Yes, the file name should be as noted above. All price tables related to cost and instructions are available for download in Bonfire. The HUB Subcontracting Plan can be found at https://comptroller.texas.gov/purchasing/docs/hub-forms/hsp-allfms.pdf. Submit under HUB Subcontracting Plan Requested Information in Bonfire.
Question 7: Will the awarded Party have the opportunity to negotiate mutually agreeable terms upon reward?
Response 7: Contractually the language in the draft contract will remain the same. Upon award of contract and issuance of work authorization, specific items related to the work authorized can be negotiated at the work authorization level.
Question 8: Do we need to submit a formal letter of interest before the due date?
Response 8: No. However, you must click Intent to Bid in Bonfire to submit your proposal.
Question 9: Are the Excel sheets available on Bonfire considered the Price Schedule/Final Cost Proposal?
(Attachment 7&E) Response 9: Yes.
Question 10: Can the forms for attachments 3-5 be recreated? Or can you provide fillable PDFs or Word docs?
Response 10: Per RFP page 5 of 19 (Adobe page 11 of 64) MS Word formats of these attachments are available for download from ESBD website. https://www.txsmartbuy.gov/esbd/601CT0000005604
Civil Rights/ HUB Subcontracting Statement Don Barwick, TxDOT HUB Coordinator My responsibilities are to ensure HUB compliance during the ENV proposal phase, awarding of contracts, and HUB Compliance monitoring throughout the contract period. Please do not send direct request/questions to me;
an email address and deadline is provided in the reminder below for your use.
Subcontracting opportunities were determined to be probable. And therefore, a HUB Subcontracting Plan is required with the proposal submission. Failure to submit a HUB subcontracting plan will result in immediate disqualification. The good faith effort goal is 26%. Note that I did say good faith effort. I did not say set aside. What the State of Texas (TxDOT) expects from each respondent is to make a good faith effort to identify, solicit, and hopefully utilize HUBs as subcontractors.
There are four methods of completing the HUB subcontracting plan: (See Part IV, HUB Subcontracting Plan, Sections 6.3.1-6.3.4 of the RFP)
(1) Respondent Intends to Subcontract with only HUBs. This method eliminates worrying about the good faith effort goal or going through good faith effort to solicit and notify. A few things to remember. HUBS must:
• Be certified by the State of Texas.
• Be in good standing. Only State of Texas certified HUBs count in this effort. HUB certificates must up to date and have not expired.
• Not have been dismissed from the program or they haven't graduated.
The easiest way to ensure that your HUBs meet requirements is to ask for their HUB certificate.
(2) Respondent Intends to Subcontract with HUBs and Non-HUBs (Meet or Exceed the Goal). You can meet our good faith effort goal by using a HUB or a number of HUBs in addition to any non-HUBs that you might be using. Couple things to remember about this method.
• First, ensure that your HUBs are certified by the State of Texas.
• Second, make sure that they are in good standing as I defined it a few minutes ago.
• Third, make sure the is correct. Respondents must need to meet or exceed the good faith effort goal of using a HUB or a number of HUBs in addition to any non-HUBs being used.
(3) Respondent Intends to Subcontract with HUBs and Non-HUBs (Does Not Meet or Exceed the Goal). Solicitation and notification is the default method if respondents are unable to use only HUBs, can't meet our good faith effort goal, and are not self-performing. This is the default method to use. If respondents cannot utilize other three methods, going through a good faith effort to solicit and notify means that respondents need to solicit. A minimum of three HUBs for each opportunity that you've identified, you need to notify two trade organizations of opportunities. And a solicitation notification effort must be completed seven business days prior to the bid being open. Weekends and holidays don't count.
(4) Respondent Does Not Intend to Subcontract. Final method of completing the HUB subcontracting that's available is to self-perform. If choosing to self-performing, the respondent is telling TxDOT that 100% of the resources are available in-house to perform all work that's described in the bid proposal. Resources in this statement means all the necessary supplies materials, equipment, labor, and or workforce to do 100% of the scope of work as described in-house. Be very careful if utilizing this method. The HUB Coordinator will review https://comptroller.texas.gov/purchasing/docs/hub-forms/hsp-allfms.pdf https://www.txsmartbuy.gov/esbd/601CT0000005604 the self-supporting explanation. Respondent statements must be thorough, concise, and convincing to be able to demonstrate that 100% of the scope of work with the firm’s own resources.
REMINDER:
Don't forget the HUB Subcontracting Plan. The HSP must be signed and included in the Bonfire submission.
Failing to sign and/or submit the HUB subcontracting plan are the two easiest ways to be disqualified.
Respondents are highly encouraged to submit a draft HSP no later than seven days prior to the due date. This allows Civil Rights to help respondents meet compliance with the HUB subcontracting plan by reviewing the draft HSP and provide comments whether or not respondents are meeting compliance at the time of the draft. Ensure that a completed, signed, and compliant HSP is included in the final submission in Bonfire.
The initial review of the Draft HUB subcontracting plans are available for the Hazardous Materials RFP through noon on Wednesday, November 12, 2025. Those can be sent directly to Laura Poldrack at laura.poldrack@txdot.gov. After reviewing, respondents will be able to see if a conditional approval was achieved or review the comments, make corrections, and resubmit.
HUB Related Questions:
HUB Question 1: If we’ve identified 100% of the asbestos inspections were performed by a HUB, would we still need to solicit to two other hubs?
Response: If meeting the goal of 26%, no. If not meeting the goal, yes.
HUB Question 2: We have a question regarding the pursuit, Will the October 28 bulletin issued by the Acting
Comptroller of the State of Texas regarding HUB procurement elements affect the RFP requirements outlined in this solicitation?
Response: No.
mailto:laura.poldrack@txdot.gov
ATTACHMENT I
Information Resources and Security Requirements
1. TYPES OF DATA
“TxDOT Data” means TxDOT information, data, records, and information to which a Contractor- Related Entity has access, has possession, or is otherwise provided to a Contractor-Related Entity by TxDOT, whether or not intended under or for the purposes of the agreement, including, without limitation, data generated or collected under this agreement, intellectual property created as a work for hire under this agreement, and Personal Identifying Information (as defined below).
TxDOT Data is classified into the four categories that control applicability of security standards: Public, Sensitive, Confidential, and Regulated. See Section 4 for Definitions.
Any data that a Contractor-Related Entity accesses and downloads from a TxDOT system, for use, manipulation, storage, or management is considered Confidential Data unless otherwise specified in writing by TxDOT.
2. DATA REQUIREMENTS
2.1 Data, Data Dictionaries, and Data Flow Diagrams
Contractor shall ensure that all TxDOT Data that is generated, manipulated, transmitted, or stored, utilizes the TxDOT taxonomy, with documented data dictionaries, and data flow diagrams (including security protocols).
2.2 Data Transfer
(a) At the completion of a deliverable, the Contractor shall transfer all TxDOT Data generated and stored for that deliverable to TxDOT in a manner and format acceptable to TxDOT and approved by TxDOT’s Information Technology Division (“ITD”).
(b) All metadata associated with the TxDOT Data transferred must remain attached to that data.
(c) Contractor shall maintain the appropriate level of data security throughout the transfer of the TxDOT Data.
2.3 Backup and Disaster Recovery
(a) Contractor shall implement business continuity procedures to fulfill all requirements of this agreement that address, as a minimum, fire, theft, natural disaster, technical difficulty, workforce problems equipment failure, or other disruption of business.
(b) Contractor shall maintain a disaster recovery plan. Contractor is responsible for all project related costs of disaster recovery during the project except for costs associated with disasters beyond Contractor’s reasonable control, and for those costs included as part of the TxDOT infrastructure responsibilities.
2.4 Open Records Requests
Contractor shall not release Information in response to an open record request related to this agreement request unless TxDOT has approved the release in writing.
2.5 Encryption
For Sensitive, Confidential, and Regulated TxDOT Data, the Contractor shall ensure TxDOT Data is encrypted while in-transit and while at-rest in accordance with the TxDOT Controls Catalog Standard SC-13, Cryptographic Protection and SC-08, Transmission Confidentiality and Integrity security requirements.
2.6 Accessibility
Contractor shall ensure all products provided under this agreement comply with the State of Texas Accessibility requirements for Electronic and Information Resources specified in 1 Texas Administrative Code (TAC) Chapters 206 and 213.
3. INFORMATION RESOURCE AND SECURITY REQUIREMENTS
3.1 Information Security Safeguards
(a) Contractor shall implement appropriate administrative, physical, and technical safeguards, in accordance with TxDOT’s security requirements, that reasonably and appropriately protects the confidentiality, integrity, and availability of TxDOT Data.
(b) Contractor shall conform its policies and procedures relating to the implementation of security safeguards to comply with TxDOT's Information Resources security program pursuant to the TxDOT and DIR’s Information Security Controls Catalog Standards.
3.2 Potential Cybersecurity Incident or Breach Notification
Contractor shall immediately report to TxDOT via the Report Cybersecurity Incident Page on TxDOT.gov, any potential cybersecurity incident or breach involving TxDOT Data (See Section 4, Definitions).
3.3 Demonstrating Compliance with Information Security Requirements If required by TxDOT, prior to contract award, at renewal, and on a recurring basis, Contractor shall provide a TxDOT Security Questionnaire as documented in the contract. Additionally, upon reasonable notice to the Contractor, and if TxDOT determines that the Contractor has violated this agreement, TxDOT, directly or through its agent, may request an attestation, which may include additional attestations, and evidence that Contractor is in compliance with applicable laws, regulations, and standards outlined in 3.5.
3.4 Security Training
In accordance with Section 2054.5192 of the Texas Government Code, each Contractor- Related Entity that will access a TxDOT computer system or database must complete a TxDOT approved cybersecurity training program that is certified under Section 2054.5192 of the Texas Government Code. The training program must be completed during the term of the contract and during any renewal period. The Contractor shall provide verification of completion of the cybersecurity training program in a method designated by TxDOT.
3.5 Applicable Laws, Regulations, and Standards
Contractor shall perform the services in accordance with the following standards, notify TxDOT of situations where compliance is not achievable, and assist TxDOT with the prevention of security gaps or conflicts that could impair security performance. Contractor shall comply with all applicable federal, state, and local laws and regulations necessary to perform the services. A non-exhaustive list of federal, state, and local laws and regulations that might be applicable includes the following.
(1) DIR Security Controls Standard Catalog and applicable TxDOT Security Requirements
(A) For Public Data, TxDOT and DIR Security Controls Standards Catalog low baseline and applicable TxDOT security requirements.
(B) For Sensitive Data TxDOT and DIR Security Controls Standards Catalog low baseline with Sensitive overlay and applicable TxDOT security requirements.
(C) For Confidential Data, TxDOT and DIR Security Controls Standards Catalog moderate baseline and applicable TxDOT security requirements.
(D) For Regulated Data, TxDOT and DIR Security Controls Standards Catalog moderate baseline, applicable TxDOT security requirements, and applicable regulated security requirements.
(2) TX-RAMP Requirements
(A) Contractor shall ensure that any Contractor-Related Entities providing a Cloud Computing Service to TxDOT that creates, accesses, transmits, uses, or stores TxDOT Data must be authorized in the Texas Risk and Authorization Management Program (“TX-RAMP”) if TxDOT determines TX-RAMP is required.
(B) TxDOT may approve the use of a TX-RAMP provisional status in lieu of a TX- RAMP certification. This approval is not effective unless approved in writing by the TxDOT Chief Information Security Officer (“CISO”) and DIR.
(C) Applicable Contractor-Related Entities must achieve the following levels of authorization by the following dates for any new contract or renewal of existing contract:
a. TX-RAMP Level 1 Status no later than January 1, 2024
b. TX-RAMP Level 2 Status no later than January 1, 2022
(3) State Laws and Regulations:
(A) Texas Administrative Code, Chapter 202 – Information Security Standards
(B) Texas Administrative Code, Chapter 206 – State Websites
(C) Texas Administrative Code, Chapter 213 – Electronic and Information Resources
(D) Texas Government Code, Chapter 552 – Public Information
(E) Texas Government Code, Chapter 2054 – Information Resources
(F) Texas Penal Code, Chapter 33 – Computer Crimes
(G) For Confidential data, Texas Business and Commerce Code, Chapter 521 – Unauthorized Use of Identifying Information
(H) For Confidential data containing Protected Health Information, Texas Health and Safety Code, Chapter 181 – Medical Records Privacy
(I) For Regulated data containing Payment Card Industry (“PCI”) information, the Payment Card Industry Data Security Standards (“PCI-DSS”)
(J) For Regulated data containing Criminal Justice Information (“CJI”), the Criminal Justice Information Services (“CJIS”) Security Policy
3.6 Information Resources Technology
(a) Any proposed information resources technology that will be installed on any TxDOT owned equipment or that will access any TxDOT network must be reviewed and approved by the ITD Architectural Review Board (“ARB”) prior to any development or design.
(b) Any proposed information resources technology that will be installed on any TxDOT owned equipment or that will access any TxDOT network must be reviewed and approved by the ITD Change Advisory Board (“CAB”) prior to implementation or delivery.
3.7 Information Resources Technology (“IRT”) Procurements
ITD must approve all procurements of:
(1) Information Resources Technology that will be owned by TxDOT.
(2) IT services for any environment that provides processing, storage, networking, management and the distribution of data to ensure alignment with Texas Government Code, Chapter 2054, Subchapter L.
3.8 Prohibited Technologies
In accordance with the Texas Statewide Plan for Prohibited Technologies, Contractor shall not provide services, equipment, or systems to TxDOT determined to be a Prohibited Technology by TxDOT. A list of the entities currently determined to be Prohibited Technologies is available at:
https://ftp.txdot.gov/pub/txdot/itd/cybersecurity/prohibited-technologies-list-cybersecurity.pdf
3.9 Background Checks Required for Access to TxDOT Data and TxDOT Systems
(a) The contractor shall ensure that a Background Check is performed on each Contractor- Related Entity prior to that person receiving access to any TxDOT system.
(b) Contractor shall ensure that a Background Check is performed on each Contractor- Related Entity prior to that person receiving access in a Contractor-Related Entity Environment to TxDOT Data that requires a Moderate or High Security Baseline
(c) A “Background Check” must include the following:
(1) Verification of Social Security number;
(2) All true alias names and counties
(3) Federal and county level checks for felony and misdemeanor arrest and convictions for the past seven years, including sentences of deferred adjudication – all names;
(4) Search of national criminal database – all names;
(5) Search of state and national sex offender registry – all names; and
(6) Search of the government sanction registry listings.
(d) Contractor shall not allow any Contractor-Related Entity for which Contractor received any unfavorable result when conducting a Background Check to access TxDOT Data or any TxDOT System.
(e) TxDOT may make exceptions to 3.9(d) on a case-by-case basis. Any exception granted by TxDOT must be in writing to be effective.
(f) Upon request by TxDOT, Contractor shall provide documentation that demonstrates to TxDOT’s satisfaction that Background Checks have been conducted as required and that no Contractor-Related Entity with one or more unfavorable results has received access to TxDOT Data or any TxDOT System.
(g) Contractor shall immediately notify TxDOT if it learns of any change in status that might cause a Contractor-Related Entity to receive an unfavorable result from a Background Check.
(h) If Contractor fails to meet the requirements of 3,9, TxDOT may terminate this contract immediately with no further liability to the Contractor.
3.10 Interconnection of TxDOT and Contractor-Related Entity Environment If a Contractor-Related Entity has or will have one or more interconnections between an Information System in that Contractor-Related Entity’s Environment and a TxDOT System or Systems, the Contractor shall execute or cause to be executed an Interconnection Security Agreement (“ISA”) for each interconnection. An executed ISA must be provided to TxDOT for each new interconnection prior to connection.
3.11 Upon request by TxDOT, the Contractor shall provide any additional information or documentation that TxDOT determines is necessary to confirm a Contractor-Related Entity’s compliance with this section. If Contractor fails to provide requested information as required, TxDOT may terminate this contract immediately with no further liability to the Contractor.
3.12 If completion of any of the requirements in this section requires obtaining information and/or action from a Contractor-Related Entity or other non-party entity, Contractor shall obtain the required information or action from that entity. For example, if the Contractor is a reseller of a Contractor-Related Entity’s product or service, the Contractor is responsible for completing the TxDOT Security Questionnaire and the Contractor must obtain all the information or actions from the Contractor-Related Entity necessary for the Contractor to complete the questionnaire.
3.13 SOC 1 Type 2 and SOC 2 Type 2 Requirements
If a Contractor-Related Entity is determined to be providing a function that is a key internal financial control or has a material financial impact on the TxDOT financial statements, then the following are applicable:
(a) Provide an Annual Report – Contract-Related entity must provide TxDOT the audit SSAE 18 Results within 15 days of Contract-Related receipt of final report from independent auditor. Licensor will engage a third party (the “Service Provider”) to conduct an examination in accordance with Statement on Standards for Attestation Engagements No. 18, as established by the American Institute of Certified Public Accountants (AICPA), and commonly referred to as a Service Organization Controls
(SOC) 1, relevant to controls related to the solution, and prepare a SOC 1 Type 2 report with respect thereto (the “SOC 1 Report”).
(b) In addition, Licensor will engage a Service Provider to conduct an examination in accordance with AT Section 101 of the Statement on Standards for Attestation Engagements to report on controls at a Service Organization relevant to security and availability, established by the AICPA (“AICPA Standards”) and, subject to AICPA Standards, prepare a Type 2 service organization controls report with respect thereto (the “SOC 2 Report”). Once the SOC 1 Report and SOC 2 Report are each available, upon written request from Licensee, Licensor must make available Licensor personnel to discuss with TxDOT the reports. Other report types will not be considered to meet these requirements.
4. DEFINED TERMS
4.1 “baseline” means the set of minimum-security controls defined for a low-impact, moderate-impact, or high-impact information system. Information on applicable baselines is available at https://www.txdot.gov/inside-txdot/division/information-technology/Cybersecurity/cybersecurity-resources.html.
4.2 “Breach” means “breach of system security” as defined in Section 521.053(a) of the Texas Business and Commerce Code, which defines breach of system security as “the unauthorized acquisition of computerized data that compromises the security, confidentiality, or integrity of sensitive personal information maintained by a person, including data that is encrypted if the person accessing the data has the key required to decrypt the data.”
4.3 “Cloud Computing Service” means a model for enabling ubiquitous, convenient, on-demand network access to a shared pool of configurable computing resources (e.g., networks, servers, storage, applications, and services) that can be rapidly provisioned and released with minimal management effort or service provider interaction. Cloud computing is referenced in Texas Government Code Title 10, Subtitle D, Chapter 2157, Subchapter A, Section 2157.007 and is defined in NIST 800-145.
4.4 “Confidential Information” has the meaning provided in 1 Texas Administrative Code § 202.1(5), which states the confidential information means “information that must be protected from unauthorized disclosure or public release based on published laws or legal agreements.”
Information that is Confidential Information under this definition includes:
(a) Dates of birth of living persons
(b) Driver’s license numbers
(c) License plate numbers
(d) Credit card numbers
(e) Insurance policy numbers
(f) Attorney-Client communications
(g) Drafts of policymaking documents
(h) Information related to pending litigation
(i) Audit working papers
(j) Competitive bidding information before contract awarded.
(k) Personal Identifiable Information
(l) Sensitive Personal Information
(m) Regulated data
(n) Information excepted from disclosure requirements of Chapter 552 of the Texas Government Code (“Texas Public Information Act”) or other applicable state or federal law
(o) Compliance reports for which the Texas Attorney General has granted permission to withhold
(p) Investigative working papers and draft reports excepted from disclosure under Section
552.116 of the Texas Government Code
4.5 “Contractor-Related Entity” means Contractor; subcontractors; their employees, agents and officers; and all other persons for whom Contractor might be legally or contractually responsible.
4.6 “Contractor-Related Entity Environment” means an Environment for which TxDOT does not manage or control the system environment, servers, operating systems, or storage with the exception of user-specific configuration settings.
4.7 “Data” means the representation of facts; as the raw material of information that is used as a basis for reasoning, decision-making, discussion, or calculation.
4.8 “Data Dictionary” means a directory of the definitions, purpose, policies and structure about data. It is a compilation of information about the data owned by the enterprise. It describes every data item in a database in enough detail for users and application developers to know what the data is and how to make use of it.
4.9 “Environment” means an aggregate of procedures, conditions, and objects affecting the development, operation, and maintenance of an information system.
4.10 “Information” means data, regardless of form, that is created, contained in, or processed by information resources facilities, communications networks, or storage media.
4.11 “Information Resources Technology” means data processing and telecommunications hardware, software, services, supplies personnel, facility resources, maintenance and training that are employed, designed, built, operated, and maintained to collect, record, process, store, retrieve, display, and transmit information.
4.12 “Information System” means a discrete set of information resources organized for the collection, processing, maintenance, use, sharing, dissemination, or disposition of information.
An Information System normally includes, but is not limited to, hardware, software, network infrastructure, information, applications, communications, and people.
4.13 “Personal Identifying Information” means information that alone or in conjunction with other information identifies an individual, including an individual's:
(a) Name, social security number, date of birth, or government-issued identification number;
(b) Mother's maiden name;
(c) Unique biometric data, including the individual's fingerprint, voice print, and retina or iris image; and
(d) Unique electronic identification number, address, or routing code.
4.14 “Potential Cybersecurity Incident” means an event which may result in the accidental or deliberate unauthorized access, loss, disclosure, modification, disruption, or destruction of information or information resources.
4.15 “Public Data” means Data that is subject to public disclosure pursuant to the Texas Public Information Act and freely and without reservation made available to the public.
4.16 “Public information” means information written, produced, collected, assembled, or maintained by or for a governmental body, including information held by individual officers or employees of a governmental body, in connection with the transaction of official TxDOT business. This includes information that is held by contractors and consultants and that TxDOT owns, to which TxDOT has a right of access, or on which public money was spent for the purpose of writing, producing, collecting, assembling, or maintaining the information. Public information includes any electronic communication created, transmitted, received, or maintained on any device if the communication is in connection with the transaction of official business. Public information may be stored in any medium and may exist in forms such as books, papers, letters, documents, e-mails, Internet postings, text messages, instant messages, printouts, photographs, maps, drawings, and audio and video recordings. Public information does not include tangible items, such as computers or guardrails.
4.17 “Regulated Data” means information for which the use and protection of is dictated by a state or federal agency or by third party agreements.
4.18 “Sensitive Data” means information that could be subject to release under an open records request, but should be controlled to protect third parties, and should be vetted and verified before release. At TxDOT, this could include operational information, personnel records, research, or internal communications.
4.19 “Sensitive Personal Information” has the meaning provided by Section 521.002(2) of the Texas Government Code, which defines sensitive personal information as:
(a) An individual’s first name or first initial and last name in combination with any one or more of the following items, if the name and item are not encrypted:
(1) Social Security Number
(2) Driver’s license number or government-issued identification number; or
(3) Account number or credit or debit card number in combination with any required security code, access code, or password that would permit access to an individual’s financial account; or
(b) Information that identifies an individual and relates to:
(1) The physical or mental health or condition of the individual;
(2) The provision of health care to the individual; or
(3) Payment for the provision of health care to the individual.
4.20 “TxDOT Security Questionnaire” means a cybersecurity and privacy questionnaire that provides TxDOT ITD necessary information for third party attestation in accordance with TxDOT requirements.
4.21 “TxDOT System” means an Information System that is owned, managed, or maintained by TxDOT or on behalf of TxDOT.
File details come from the government source that posted it. Updated .