Attach 23.doc

Attachment 23, Section J

PDPS AAMVA Network Connectivity Required Information

The following information shall be provided to AAMVA by the vendor for AAMVA network connectivity:

1. A site diagram - Visio format is preferred

2. Installation address including building name (if any), floor, and room where the circuit is to be installed. If required, a CFA/LOA will need to be provided.

3. Primary and secondary site contacts for line installation (name, email and phone number)

4. Installation address including building name (if any), floor, and room where the SCE is to be installed if different than circuit termination rental

5. Primary and secondary site contacts for PBS facility (if different from circuit contacts)

6. Phone number at circuit installation location - to determine the LATA information.

7. Phone number of site provided POTS line (s) to connect to each VPE package for Verizon remote access for management and maintenance. This phone number is not required at order time, purpose must be provided within 2 weeks of order placement so as not to delay the installation.

8. Access requirements for circuit and VPE installation personnel (i.e. hours, process, restrictions, etc.). If access requirements are different for Telco versus VPE, then please distinctly detail.

9. Vendor shall provide information as to whether a rack mount kit for the CEP is required.

10. IP subnet and IP addressing allocated to the LAN of AAMVA route - as described above - if the vendor needs AAMVAnet™ to allocate a subnet to the vendor, information should be provided regarding the subnet size required by the vendor. Vendor shall provide the host list and use/assignment justification if requested.

11. Vendor shall provide the exact location where the AAMVAnet™ equipment will be located (floor, room, rack, etc.).

12. If the AAMVAnet™ circuit is installed into vendor or Telco owned fiber, the vendor shall provide information to AAMVA as to whether LOA/CFA is required or not. If an LOA/CFA is required, then the vendor shall provide the completed LOA/CFA as part of the initial order. AAMVAnet™ can provide an LOA template if required.

13. The vendor shall configure the network connection to function with the AAMVAnet™ Network.