DRAFT_640-23-104_B520_PSU_Cutsheets.pdf

4 TDS008

8.1 ensuite bathroom doors

LIGATURE-RESISTANT BATHROOM DOOR (<11LBS LOAD RELEASE)

PRODUCT OUTLINE

Providing privacy and dignity without compromising on safety, the load release bathroom door solves the biggest unsupervised risk in behavioral health�

With the soft, lightweight leaves detaching if a weight of less than 11lbs is applied, the door maintains patients’ sense of self worth whilst still allowing staff to carry out head and feet observations�

KEY FEATURES

Load release - Doors detach when a weight of less than

11lbs is applied to the door - eliminating ligature points created by the meeting of two hard surfaces�

Two leaves - By having two leaves which are available in medium, wide and extra wide widths, this is an off-the-shelf product that does not require made-to-order sizing and specification like others on the market.

Self-locating magnets - Allow for easy leaf reattachment in the case of an incident and remove the need to bend down to reattach the bottom pivot�

Magnets are securely housed in robust wall mounts�

Improved pivots - The 34% lighter pivots increase the ligature resistance performance of the bathroom door and further reduce the risk of weaponization�

Privacy screen - The two leaves create a screen for patients whilst using the bathroom which still allow for head and feet observations�

Leaf design options - Choose from a range of leaf design options including two original artworks from arts

& behavioral health charity Hospital Rooms�

5 TDS008

Wall Mount with Pivot Nib Wall Mount with Pivot Nib

PRODUCT SCOPE

• The Bathroom Door is a load release, saloon style door designed for behavioral health environments�

• Door leaves have been tested the following standards:

• ASTM E84 - Standard Test Method for Surface

Burning Characteristics of Building Materials

• BS EN 1021-1:2006 smouldering cigarette

• BS EN 1021-2: 2006 match flame equivalent

• BS 5852: 1982 Part 2

• BS 7176:2007+A1:2011 Low Hazard

• BS EN 597-1-1995 smouldering cigarette

• BS EN 597-2: 1995 match flame equivalent

• Mechanical Performance - Safehinge Primera products have been rigorously tested to ensure they are suitable for behavioral health environments� For more details on the mechanical performance visit www� safehingeprimera�com/resources or contact Safehinge

Primera at inquiries@safehingeprimera�com or +1 617�

898� 0700�

• Ligature Performance - The door leaves will release at a load of <11lbs� It is essential that the product has been installed and maintained as stated in the installation instructions and O&M manual to ensure the ligature performance is met for the lifetime of the product�

• Please be aware that the Bathroom Wall Mount and

Pivot contains strong magnets� These are securely fixed to the opening and have been thoroughly tested with patient safety in mind to ensure the magnets cannot be accessed once installed� Before installation, it is critical that anyone handling the product is aware of the magnet safety information - SHP document

HSN003�

PRODUCT DIAGRAM

7 TDS008

Wall Mount and Pivot Nib

FRAME OPENING

Frame Opening (FO)

Leaf Size Min FO Max FO

* Overlap will range from 13/16” (20mm) at ‘Max FO’ to

5 7/8” (150mm) at ‘Min FO’�

We do not recommend an overlap outside of this range�

CLEAR OPENING WIDTH

The Clear Opening Width (COW) is calculated by the Frame Opening (FO) - Pivot/Wall Mount Depth�

Medium 29 3/16” (741mm) 34 1/4” (870mm)

Wide 34 5/16” (871mm) 39 3/8” (1000mm)

Extra Wide 39 7/16” (1001mm) 44” (1118mm)

8 TDS008

DOOR FRAME CHECK

The Wall Mount can be fitted directly to a door frame which has a minimum Rabbet width of 1 3/4” (45mm), or Soffit width of 1 9/16” (40mm). The frame surface must be flat to avoid any gaps between frame and mount.

Rabbet Width

1 3/4” (45mm) min.*

Soffit Width

1 9/16” (40mm) min.

Stop Height

7/8” (22mm) Max.

*must leave a minimum of 3/16” (5mm) between the Wall Mount and the Soffit.

FRAME PACKER KIT

A frame packer kit allows fitment of the Wall Mount to a frame narrower than 1 9/16” (40mm) with a stop height of

5/8” (16mm)� The diagram below shows the dimensions required with the minimum allowed sizes�

Rabbet Width

1 1/8” (28mm) min.

Soffit Width

7/8” (22mm) min.

Stop Height

5/8” (16mm) Fixed

<11lbs Release Door Frame Packer

Revised:04/17/2024

WH3740

P-935 / ALTERNATE

Model WH3740

BestCare

Patients, Not Prisoners®

Healthcare and Ligature Resistant Products

Whitehall

Ligature Resistant Stainless Steel Basin Powder Coated White

ADA Compliant

Division of

Acorn Engineering Company®

WH3740-WH3375-SO

Fixture May Show Some Available Options

Ligature Resistant Stainless Steel Basin

Ligature Resistant Stainless Steel Basin is engineered to combine the look and feel of commercial grade designer basins and countertops with durability and economy in mind. Each standard height Washbasin complies with ANSI, UFAS, and ADA requirements. Compliance is subject to the interpretation and requirements of the local code authority.

Countertop and Basin are constructed of 16 gauge stainless steel with exposed surfaces powder coated white. Basin includes ligature resistant side splashes, overflow, grid strainer, waste piping and 1-1/2” P-Trap. Standard unit includes Deck punching for 4” Centerset Faucet and optionally available punched for 8” Centerset

Faucet; Punching consists of (3) 1-5/16” Dia Holes.

Enclosure conceals P-trap and optional valve assembly and is fabricated from 18 gauge, type

304 stainless steel, powder coated white.

Optional Ligature Resistant Faucet (WH3375- SO shown) is available. See Individual BestCare

Specification Sheets for 4” Centerset Faucet.

Optional Mixing Valve WHST70-12 delivers tempered water flow by compensating for pressure and temperature fluctuations and is ASSE 1070 compliant. Valve is to be field set to 105º Fahrenheit and includes strainers and integral checks. Operating range is 30 to 100PSI.

Optional -SS Stainless Steel Finish provides a #4 satin stainless steel finish to all exposed surfaces in lieu of the white powder coat.

GUIDE SPECIFICATION

Ligature Resistant stainless steel Washbasin. Unit with 34" standard rim height to conform with ANSI, UFAS and ADA Accessibility Standards.

Provide integral “D” Shaped basin with an integral, rear overflow. Basin, countertop, backsplash and sidesplash to be constructed of type 304 stainless steel. Washbasin shall conform to ANSI Z124.3 and ANSI Z124.6. Trap enclosure to be constructed of 18 gauge, type 304 stainless steel and is powder coated white.

Please visit www.whitehallmfg.com for most current specifications.

Recyclable Product

Water Conserving

Federal Public Law 111-380 (No Lead)

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681

P-935 BASE BID

BASE-BID

$1887.00

9.2 BASE LAVATORY

http://www.whitehallmfg.com/

Revised:04/17/2024

WH3740

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Patients, Not Prisoners ®

MODEL NUMBER AND OPTIONS SELECTION:

BASE MODEL NUMBER

O WH3740

O WH3740-H38 Ligature Resistant Stainless Steel Washbasin (Punched for 8” Centerset Faucet, Specified Separately)

O WH3740-SS LR Washbasin-#4 Stainless Steel Finish (Punched for 4” Centerset Faucet, Spec. Separately)

O WH3740-H38-SS LR Washbasin-#4 Stainless Steel Finish (Punched for 8” Centerset Faucet, Spec. Separately)

VALVE SELECTION

See Individual BestCare Specification Sheets for 4” Centerset Faucet

(Refer to https://www.whitehallmfg.com/faucets )

PRODUCT OPTIONS

O -MC Mounting Carrier

O -WHST70-12 Tempering Valve With Integral Mounting Feet Brass Body With 1/2” NPT Connections

19"

NOTES:

1. BACK/SIDE SPLASH

2. HEMISPHERICAL PUSHBUTTON

3. CONICAL SPRAYHEAD

4. D-SHAPE BOWL

5. ANTI-LIGATURE TRAP COVER

6. WALL ANCHORING HARDWARE (BY OTHERS)

7. TAMPER RESISTANT SCREWS

(483) 3"

(76)

(545) 6

(643)

4"

(102)

34" (864)

(416)

ADULT ADA

REC

All dimensions are nominal and subject to manufacturer's change without notice. Whitehall assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

MODEL#WH3740-WH3377L

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

It is not a replacement for professionals who are trained in the proper evaluation, management and supervision of persons at risk of suicide.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681

Ligature Resistant Stainless Steel Washbasin (Punched for 4” Centerset Faucet, Specified Separately) http://www.whitehallmfg.com/faucets) http://www.p65warnings.ca.gov/

Revised: 06/11/24

WH3378-HC-PPZ

P-930A / ALTERNATE

Ligature Resistant, Dual Temperature, Piezo Button Faucet, 4” Centerset

Model WH3378-HC-PPZ

Ligature Resistant, Dual Temperature, Piezo Button

Faucet, 4” Centerset

Ligature Resistant, Dual Temperature, Piezo Button Faucet is recommended for patient bathrooms and facilities where ligature risk is a concern. The Faucet is designed to be retrofitted to existing 4” centerset lavatory decks with 3-hole openings 1” to 1-1/2” diameter. Or can be provided with BestCare ligature resistant lavatories. The Faucet includes Dual Temperature Piezo Buttons. Provided with a

0.5 GPM multi-stream laminar nozzle and a

chrome plated cast bronze Faucet body.

Valve 9VDC dual temp solenoid operated ADA compliant requiring less than 5lbs of force to operate. Valve is metering with a valve timing range of 0-60 seconds valve can be remotely located up to 10 feet. A

120VAC/9VDC plug-in transformer or a 6 AAA Battery Pack provided. Batteries not included.

Spray nozzle is non-splashing, non-aerated multi-stream laminar with a 0.5 GPM flow.

Optional WHST70-12 Mixing valve option is ASSE 1070 compliant and delivers tempered water flow by compensating for pressure and temperature fluctuations. Factory set to

105°F (41°C) and field adjustable. Includes strainers and integral checks. Operating range is 30 to 100 PSI.

Optional -LFK Laminar Flow Restrictor

Kit to increase flow rate of Faucet. Kit includes Spanner Wrench to remove existing

Nozzle and three different Laminar Flow Restrictor replacements providing 1.2 GPM,

1.5 GPM, and 1.75 GPM.

Fixture is ADA Compliant. Unit conforms with ADA requirements for accessibility when correctly installed.

GUIDE SPECIFICATION

Provide and install ligature resistant Faucet

(specify model number and options) Faucet shall be dual temperature (cold and tempered) with Piezo Button operation.

Chrome plated bronze body with a 0.5 GPM multi stream laminar flow nozzle.

Complies with the following standards:

4 8

(Use The Following For Basins Manufactured By Others) 0 -WH3378-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

(Use the Following For Whitehall BestCare® Basins) 0 -WH3378L-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378L-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

ACCESSORIES:

0 -WHST70-12 1/2” NPT ASSE 1070 Compliant Hot & Cold, Temperature / Pressure Balancing Mixing Valve

0 -LFK Laminar Flow Restrictor Kit (Provides 1.2 GPM, 1.5 GPM, and 1.75 GPM Flow Controls)

[184]

2 1

[98]

[38]

2" [51]

MAX

" [95]

CL

CL

"[64]

7 3" [76]

4" 1 [102]

-WH3378-HC-PPZ-BAT

OPTIONAL -BAT BATTERY

OPERATION DETAIL 4

(BATTERIES NOT INCLUDED)

1. CHROME PLATED CAST BRONZE FAUCET HOUSING

2. 0.5 GPM MULTI-STREAM LAMINAR NOZZLE 10

3. LIGATURE RESISTANT PIEZO BUTTONS

4. 9VDC SOLENOID DUAL-TEMP VALVE ASSEMBLY

5. CHECKSTOP / STRAINER ASSEMBLY

6. 1/2” NPS INLET HOSES

7. MOUNTING HARDWARE

8. BATTERY PACK (OPTIONAL)

9. WIRING HARNESS

10. 9VDC PLUG-IN TRANSFORMER

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

64]

Revised:04/12/2024

WH3740BAR

ADA Compliant Bariatric

Stainless Steel Basin Powder Coated White

Model WH3740BAR

Ligature Resistant Bariatric

Ligature Resistant Bariatric Stainless Steel Basin is engineered to combine the look and feel of commercial grade designer basins and countertops with durability and economy in mind.

Fixture is rated at 1,000 lbs when used with an appropriate system (Jay R. Smith model

0848-M31 is optionally available). Each standard height Washbasin complies with ANSI, UFAS, and ADA requirements. Compliance is subject to the interpretation and requirements of the local code authority.

Countertop and Basin are constructed of 16 gage stainless steel with exposed surfaces powder coated white with a 14 gage stainless steel sub-frame. Basin includes ligature resistant side splashes, overflow, grid strainer, waste piping and

1-1/2” P-Trap. Standard unit includes Deck punching for 4” Centerset Faucet and optionally available punched for 8” Centerset Faucet;

Punching consists of (3) 1-5/16” Dia. Holes.

Enclosure conceals P-trap and optional valve assembly and is fabricated from 18 gage, type 304 stainless steel, powder coated white.

Optional Ligature Resistant Faucet (WH3377 shown) is available. See Individual BestCare Specification Sheets for 4” Centerset Faucet.

WH3740BAR-WH3377

Optional Mixing Valve WHST70-12 delivers tempered water flow by compensating for pressure and temperature fluctuations and is ASSE 1070 compliant. Valve is to be field set to 105º Fahrenheit and includes strainers and integral checks. Operating range is 30 to 100 PSI.

Optional -SS Stainless Steel Finish provides a

#4 satin stainless steel finish to all exposed surfaces in lieu of the white powder coat.

GUIDE SPECIFICATION

Ligature Resistant Bariatric Stainless Steel Washbasin. Unit with 34" standard rim height to conform with ANSI, UFAS and ADA Accessibility

Standards. Provide integral “D” Shaped basin with an integral, rear overflow. Basin, countertop, backsplash and sidesplash to be constructed of type 304 stainless steel. Washbasin shall conform to ANSI Z124.3 and ANSI Z124.6. Trap cover to be constructed of 18 gage, type 304 stainless steel and powder coated white.

P-936 BARIATRIC 9.3 BARIATRIC LAVATORY

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

0 WH3740BAR Ligature Resistant Bariatric Stn Stl Washbasin (Punched for 4” Centerset Faucet, Specified Separately)

0 WH3740BAR-H38 Ligature Resistant Bariatric Stn Stl Washbasin (Punched for 8” Centerset Faucet, Specified Separately)

0 WH3740BAR-SS Ligature Resistant Bariatric Washbasin-#4 Stainless Steel Finish (Punched for 4” Centerset Faucet)

0 WH3740BAR-H38-SS Ligature Resistant Bariatric Washbasin-#4 Stainless Steel Finish (Punched for 8” Centerset Faucet)

VALVE SELECTION

See Individual BestCare Specification Sheets for 4” Centerset Faucet

(Refer to https://www.whitehallmfg.com/faucets )

PRODUCT OPTIONS

0 -MC Mounting Carrier (Bariatric)

0 -WHST70-12 Tempering Valve With Integral Mounting Feet Brass Body With 1/2” NPT Connections

1 1. OPTIONAL -MC BARIATRIC MOUNTING

CARRIER, SHOWN FOR REFERENCE ONLY

2. HEMISPERICAL PUSHBUTTON

3. CONICAL SPRAYHEAD

4. D-SHAPE BOWL

5. ANTI-LIGATURE TRAP COVER

6. WALL ANCHORING HARDWARE (BY OTHERS)

4 7. TAMPER RESISTANT SCREWS

(565)

2 3

" 1

(572)

(645)

20"

(508)

34"

(864)

ADA

REC.

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

MODEL # WH3740BAR-WH3377

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

It is not a replacement for professionals who are trained in the proper evaluation, management and

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681 https://www.whitehallmfg.com/faucets

Dual Temperature, Faucet, 4” Centerset

Ligature Resistant, Dual Temperature, Piezo Button Faucet is recommended for patient bathrooms and facilities where ligature risk is a concern. The Faucet is designed to be retrofitted to existing 4” centerset lavatory decks with 3-hole openings 1” to 1-1/2” diameter. Or can be provided with BestCare ligature resistant lavatories. The Faucet includes Dual Temperature Piezo Buttons. Provided with a

0.5 GPM multi-stream laminar nozzle and a

chrome plated cast bronze Faucet body.

Valve 9VDC dual temp solenoid operated ADA compliant requiring less than 5lbs of force to operate. Valve is metering with a valve timing range of 0-60 seconds valve can be remotely located up to 10 feet. A

120VAC/9VDC plug-in transformer or a 6 AAA Battery Pack provided. Batteries not included.

water flow by compensating for pressure and temperature fluctuations. Factory set to

105°F (41°C) and field adjustable. Includes strainers and integral checks. Operating range is 30 to 100 PSI.

Optional -LFK Laminar Flow Restrictor

Kit to increase flow rate of Faucet. Kit includes Spanner Wrench to remove existing

Nozzle and three different Laminar Flow

Restrictor replacements providing 1.2 GPM,

1.5 GPM, and 1.75 GPM.

Fixture is ADA Compliant. Unit conforms with ADA requirements for accessibility when correctly installed.

GUIDE SPECIFICATION

Provide and install ligature resistant Faucet

(specify model number and options) Faucet shall be dual temperature (cold and tempered) with Piezo Button operation.

(Use The Following For Basins Manufactured By Others) 0 -WH3378-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

(Use the Following For Whitehall BestCare® Basins) 0 -WH3378L-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378L-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

ACCESSORIES:

0 -WHST70-12 1/2” NPT ASSE 1070 Compliant Hot & Cold, Temperature / Pressure Balancing Mixing Valve

0 -LFK Laminar Flow Restrictor Kit (Provides 1.2 GPM, 1.5 GPM, and 1.75 GPM Flow Controls)

[184]

2 1

" [95]

CL

CL

2. 0.5 GPM MULTI-STREAM LAMINAR NOZZLE 10

3. LIGATURE RESISTANT PIEZO BUTTONS

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

0 WH3740BAR

0 WH3740BAR-H38 Ligature Resistant Bariatric Stn Stl Washbasin (Punched for 8” Centerset Faucet, Specified Separately)

0 WH3740BAR-SS Ligature Resistant Bariatric Washbasin-#4 Stainless Steel Finish (Punched for 4” Centerset Faucet)

0 WH3740BAR-H38-SS Ligature Resistant Bariatric Washbasin-#4 Stainless Steel Finish (Punched for 8” Centerset Faucet)

VALVE SELECTION

See Individual BestCare Specification Sheets for 4” Centerset Faucet

(Refer to https://www.whitehallmfg.com/faucets )

PRODUCT OPTIONS

0 -MC Mounting Carrier (Bariatric)

1 1. OPTIONAL -MC BARIATRIC MOUNTING

CARRIER, SHOWN FOR REFERENCE ONLY

2. HEMISPERICAL PUSHBUTTON

3. CONICAL SPRAYHEAD

4. D-SHAPE BOWL

5. ANTI-LIGATURE TRAP COVER

6. WALL ANCHORING HARDWARE (BY OTHERS)

4 7. TAMPER RESISTANT SCREWS

(565)

" 1

(572)

(645)

20"

(508)

ADA

REC.

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

MODEL # WH3740BAR-WH3377

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

It is not a replacement for professionals who are trained in the proper evaluation, management and

Contact Title

Approval for Manufacturing/Signature

Ligature Resistant Bariatric Stn Stl Washbasin (Punched for 4” Centerset Faucet, Specified Separately) https://www.whitehallmfg.com/faucets

N U

M B

E R

D

IM

E N

S

IO

N S

A R

E S

U B

J E

C T

T O

M A

N U

F A

C T

U R

E R

S T

O L

E R

A N

C E

A N

D C

H A

N G

E W

IT

H

O U

T N

O T

IC

W

C

A N

A S

S U

M E

N O

R E

S P

O N

S

IB

IL

IT

Y F

O R

U S

E O

F S

U P

E R

S E

D E

D O

R V

O

ID

D A

T A

V : A

SMITH JAY R.

SMITH MFG. CO.

M E M B

E R

DIVISION OF SMITH INDUSTRIES, INC. R

POST OFFICE BOX 3237 ASPE

MONTGOMERY, ALABAMA 36109-0237 (USA)

R

MEMBER OF

CUSTOMER TEL: 334-277-8520 TELEX: 782306 FAX: 334-272-7396 t DRIVEN

LOCATION

P-935

D R

A W

IN

G

N U

M B

S -M

FIXTURE SUPPORT FLOOR MOUNTED TYPE

FOR LAVATORIES AND SINKS WITH HANGER PLATE AND SLEEVES

TO SUPPORT WALL HANGER AND BRACKETS FURNISHED BY OTHERS

*31

2 Min.

Rim of Fixture (6) 1/2"Studs

As 3 3

Req'd As

Req'd

1/2 Studs with Nuts 16 and Washers

Finished Wall

1 X 3 Finished Floor

Steel

Tubing

(4) 9/16"Dia. Holes

Steel Base

Welded to

Upright

BASE DETAIL

WHITEHALL WH3740BAR LAVATORY

1. Special Plate Required and supply (2) 04977-10-4 & (4) 04977-10-14 sleeves.

2. Tested to 1,000 lbs. with no fracture/breakage occurring. The ASME A112.6.1M Standard does not address bariatric sink or lavatory supports.

3. *This dimension can be increased when fixture support is to be installed behind the wall. (Specify when required and wall thickness).

4. The rough-in dimensions listed on this drawing are based on current information available to Jay R.

Smith by the fixture manufacturers. We recommend that you verify these dimensions with the fixture manufacturer. We will not accept responsibility for rough-in dimension changes by the fixture manufacturer.

! WARNING: Cancer and Reproductive Health - www.P65Warnings.ca.gov

S

IZ

C

A L E

N O

T E

: 0 -2

-2

P

P R

O V

E D

B Y

H

E C

K E

D B

Y

L

A W

N B

Y

-M

B

A

06-08-22

03-10-22 10-17-16

5-8-15

*3 12" dim was 3" Rev. Notes

Rev. Notes Rev. Notes

CL

CL

CL

CL

CL

CL

CL

CL

WEIGHT

POUNDS

VOLUME

CUBIC FEET FIGURE NUMBER

0848-M31

F

IG

U

REV. DATE DESCRIPTION BY CKD. BY

SMITH

CUSTOMER

DRIVEN

JAY R.

SMITH MFG. CO.

DIVISION OF SMITH INDUSTRIES, INC.

POST OFFICE BOX 3237

TEL: 334-277-8520 TELEX: 782306 FAX: 334-272-7396

ASPE

M E M B

MEMBER

LOCATION

P-935-ALTERNATE

FIXTURE SUPPORT FLOOR MOUNTED TYPE

2 Min.

*43 4 Max.

C

(2) 1/4"Studs

F

2 51

G H

(4) 3 8" Studs

Finished Wall

Finished Floor

(4) 9/16"Dia. Holes

FIXTURE NAME NUMBER SIZE

Best-Care WH3740 21 12 x 19

A B C D E F G H

34 359 16 20 4 3

17 21

2 12

NOTE: *This dimension can be increased when fixture support is to be installed behind the wall. (Specify when required and wall thickness).

NOTE: The rough-in dimensions listed on this drawing are based on current information available to Jay R. Smith by the fixture manufacturers. We recommend that you verify these dimensions with the fixture manufacturer. We will not accept responsibility for rough-in dimension changes by the fixture manufacturer.

REV.

Date

DATE

Description

DESCRIPTION

CR CR

BY CKD. BY

WEIGHT

POUNDS

VOLUME

CUBIC FEET FIGURE NUMBER

F

IG

U

M B

A W

N B

Y

E C

K E

D B

Y

P R

O V

E D

B Y

T E

-0

-2

A L E

N O

A W

IN

G

N U

M B

V

E N

S

IO

N S

A R

E S

U B

J E

C T

T O

M A

N U

F A

C T

U R

E R

S T

O L E

R A

N C

E A

N D

C H

A N

G E

W

IT

H O

U T

N O

T

C A

N A

S S

U M

E N

O R

E S

P O

N S

IB

IL

IT

Y

F O

R U

S E

O F

S U

P E

R S

E D

E D

O R

V O

ID

D

A

Revised: 04/17/2024

WH3741

Stainless Steel Corner Basin

ADA Compliant

Model WH3741L

WH3741R

Ligature Resistant Corner

Ligature Resistant Corner Stainless Steel Basin is engineered to combine the look and feel of commercial grade designer basins and countertops with durability and economy in mind. Each standard height Washbasin complies with ANSI, UFAS, and ADA requirements. Compliance is subject to the interpretation and requirements of the local code authority.

Countertop and Basin are constructed of 16 gage stainless steel with exposed surfaces powder coated white. Basin includes ligature resistant side splashes, overflow, grid strainer, waste piping and

1-1/2” P-Trap.

Enclosure conceals P-trap and optional valve assembly and is fabricated from 18 gage, type 304 stainless steel includes an access panel and is powder coated white.

Optional Ligature Resistant Faucet (WH3375- SO shown) is available. See Individual BestCare Specification Sheets for 4” Centerset Faucet.

Patented D840,523

WH3741L-WH3375-SO

Optional Mixing Valve WHST70-12 delivers tempered water flow by compensating for pressure and temperature fluctuations and is ASSE 1070 compliant. Valve is to be field set to 105º Fahrenheit and includes strainers and integral checks. Operating range is 30PSI to 300PSI.

Optional -SS Stainless Steel Finish provides a #4 satin stainless steel finish to all exposed surfaces in lieu of the white powder coat.

GUIDE SPECIFICATION

Ligature Resistant stainless steel Washbasin. Unit with 34" standard rim height to conform with ANSI, UFAS and ADA Accessibility Standards.

Provide integral “D” Shaped basin with an integral, rear overflow. Basin, countertop, backsplash and sidesplash to be constructed of type 304 stainless steel. Washbasin shall conform to ANSI Z124.3 and ANSI Z124.6. Trap enclosure to be constructed of 18 gage, type 304 stainless steel and is powder coated white.

Product

Federal Public Law

P935A - ALTERNATE 9.4 ADD ALTERNATE LAVATORY

Revised: 04/17/2024

WH3741

BASE MODEL NUMBER:

0 WH3741L-SS Ligature Resistant Stainless Steel Corner Basin - #4 Stainless Steel Finish, Left Corner

0 WH3741R-SS Ligature Resistant Stainless Steel Corner Basin - #4 Stainless Steel Finish, Right Corner

VALVE SELECTION

See Individual BestCare Specification Sheets for 4” Centerset Faucet

(Refer to https://www.whitehallmfg.com/faucets )

PRODUCT OPTIONS:

0 -MC

29"

(737)

(241)

(57)

(552)

NOTES:

1. Ligature Resistant Sensor Activated

Faucet (Optional)

2. D-Shaped Bowl

3. Back/Side Splash

4. Ligature Resistant Bottom Enclosure

With Access Panel

5. Tamper Resistant Screws

6. Wall Anchoring Hardware

(By Others)

22"

(559)

24"

(610) assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

MODEL# WH3741L-WH3375-SO

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681

Ligature Resistant Stainless Steel Corner Basin, Right Corner

Ligature Resistant Stainless Steel Corner Basin, Left Corner

WH3741R

WH3741L

Mounting Carrier http://www.whitehallmfg.com/faucets)

Finished Floor

SMITH

CUSTOMER

DRIVEN

JAY R.

SMITH MFG. CO.

MEMBER OF MORRIS GROUP INTERNATIONAL

POST OFFICE BOX 3237

TEL: 334-277-8520 TELEX: 782306 FAX: 334-272-7396

M E M

ASPE

MEMBER OF

R t

LOCATION

P-930A / ALTERNATE

FIXTURE SUPPORT FLOOR MOUNTED TYPE

2"

Max.

3 Min.

*43 4 Max.

F

Finished Wall

C (6) 5 8" x 8" Long

Support Studs B

Finished

Wall

(4) 9/16"Dia. Holes

NOTE: Special plates required.

NOTE: *This dimension can be increased when fixture support is to be installed behind the wall.

(Specify when required and wall thickness).

NOTE: The rough-in dimensions listed on this drawing are based on current information available to Jay R. Smith by the fixture manufacturers. We recommend that you verify these dimensions with the fixture manufacturer. We will not accept responsibility for rough-in dimension changes by the fixture manufacturer.

A 05-25-2023 Rev wall min from 2 to 3 CL CL

WEIGHT

POUNDS

VOLUME

CUBIC FEET FIGURE NUMBER

REV. DATE DESCRIPTION BY CKD. BY

R

Finished Wall

F

IG

U

M B

A W

N B

Y

M

E C

K E

D B

Y

P R

O V

E D

B Y

M

T E

-1

-2

A L E

: N O

A W

IN

G

N U

M B

E N

S

IO

N S

A R

E S

U B

J E

C T

T O

M A

N U

F A

C T

U R

E R

S T

O L

E R

A N

C E

A N

D C

H A

N G

E W

IT

H

O U

T N

O T

C

A N

A S

S U

M E

N O

R E

S P

O N

S

IB

IL

IT

Y F

O R

U S

E O

F S

U P

E R

S E

D E

D O

R V

O

ID

D A

FIXTURE NAME NUMBER SIZE

Corner Lav.

WH3741L

WH3776L

29 x 21 3 4

A=Rim B C D E F

34 ADA

Adult

2 ADA

Adult 22 25 14 12 26

! WARNING: Cancer and Reproductive Health - www.P65Warnings.ca.gov

Dual Temperature, Faucet, 4” Centerset

Ligature Resistant, Dual Temperature, Piezo Button Faucet is recommended for patient bathrooms and facilities where ligature risk is a concern. The Faucet is designed to be retrofitted to existing 4” centerset lavatory decks with 3-hole openings 1” to 1-1/2” diameter. Or can be provided with BestCare ligature resistant lavatories. The Faucet includes Dual Temperature Piezo Buttons. Provided with a

0.5 GPM multi-stream laminar nozzle and a

chrome plated cast bronze Faucet body.

Valve 9VDC dual temp solenoid operated ADA compliant requiring less than 5lbs of force to operate. Valve is metering with a valve timing range of 0-60 seconds valve can be remotely located up to 10 feet. A

120VAC/9VDC plug-in transformer or a 6 AAA Battery Pack provided. Batteries not included.

water flow by compensating for pressure and temperature fluctuations. Factory set to

105°F (41°C) and field adjustable. Includes strainers and integral checks. Operating range is 30 to 100 PSI.

Optional -LFK Laminar Flow Restrictor

Kit to increase flow rate of Faucet. Kit includes Spanner Wrench to remove existing

Nozzle and three different Laminar Flow Restrictor replacements providing 1.2 GPM,

1.5 GPM, and 1.75 GPM.

Fixture is ADA Compliant. Unit conforms with ADA requirements for accessibility when correctly installed.

GUIDE SPECIFICATION

Provide and install ligature resistant Faucet

(specify model number and options) Faucet shall be dual temperature (cold and tempered) with Piezo Button operation.

(Use The Following For Basins Manufactured By Others) 0 -WH3378-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

(Use the Following For Whitehall BestCare® Basins) 0 -WH3378L-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

ACCESSORIES:

0 -WHST70-12 1/2” NPT ASSE 1070 Compliant Hot & Cold, Temperature / Pressure Balancing Mixing Valve

0 -LFK Laminar Flow Restrictor Kit (Provides 1.2 GPM, 1.5 GPM, and 1.75 GPM Flow Controls)

[184]

2 1

" [95]

CL

CL

2. 0.5 GPM MULTI-STREAM LAMINAR NOZZLE 10

3. LIGATURE RESISTANT PIEZO BUTTONS

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681

0 -WH3378L-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

Revised: 07/10/2024

WH2142-ADA-W

WH2142-ADA-W-EGE10 WH2142ADA-W-EGE10

Siphon Jet Toilet

Model WH2142-ADA-W-EGE10

(Wall Supply)

Ligature Resistant Siphon Jet Toilet - ADA 2010 Compliant

Ligature Resistant Siphon Jet Toilet is arranged to be installed against a finished wall from the front side with a fixture-to-wall mounting channel. Unit is fabricated from 16 gage, type 304 stainless steel and is seamless welded construction with exterior surfaces powder coated white (interior of toilet will have a satin finish and will not be powder coated).

Toilet will be provided with WH-LRSC-GRAY

Ligature Resistant ABS Toilet Seat Cover.

Toilet is siphon jet type with an elongated bowl manufactured to comply with ASME A112.19.3, CSA B45.4 and 2010 ADA Standards for

Accessible Design. Toilet requires a minimum of

25 PSI flow pressure and uses a minimum water consumption of 1.28 GPF. On-floor units can without permanent damage. Trap has a minimum 3-1/2" seal, will pass a 2-1/8" ball and is fully enclosed. Toilet has a 1-1/2” NPT flushing inlet connection. Wall waste outlet connection is a 5-

1/2” gasket flange. Floor waste outlet locations from rear of fixture are 10” or 12” with a 7-1/2 gasket flange.

Flush Valves, Top Supply Covers and Wall

Supply Access Panels are optionally available for all styles of Toilets and may be specified separately.

GUIDE SPECIFICATION

Provide and install Whitehall Best-Care™

Ligature Resistant ADA 2010 Compliant Toilet

(specify model number and options). Fixture shall be fabricated from 16 gage, type 304 stainless steel. On-floor units can withstand load rating of 5000 lbs. without permanent damage.

Construction shall be seamless welded and exterior surfaces are powder coated white.

Housing to include side access panels. Toilet shall be concealed siphon jet type with an elongated bowl and self-draining flushing rim.

Toilet shall be ASME A112.19.3, CSA B45.4, and

ADA 2010 compliant. Toilet requires a minimum of 25 PSI flow pressure and uses a minimum water consumption of 1.28 GPF. Toilet trap shall have a minimum 3-1/2” seal and shall pass a

2-1/8” diameter ball and is fully enclosed.

Provided with WH-LRSC-GRAY Ligature

Resistant ABS Toilet Seat Cover.

• Patented US 10,052,000 B2

Product

Complies with the following standards:

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 591-9280 • (626) 968-6681

P-910 AND P-913

withstand load rating of 5000 lbs.

9.5 TOILET. (STD AND BARIATRIC)

Revised: 07/10/2024

WH2142-ADA-W

0 WH2142-ADA-W-2-EGE10 Wall Outlet, Siphon Jet Toilet

0 WH2142-ADA-W-3-EGE10_10 Floor Outlet, Siphon Jet Toilet (10” rough-in from wall to the center of waste outlet)

0 WH2142-ADA-W-3-EGE10_12 Floor Outlet, Siphon Jet Toilet (12” rough-in from wall to the center of waste outlet)

Accessories:

Note: Gray Ligature Resistant Seat Cover is Standard 0 WH-LRSC-WHITE Ligature Resistant Seat Cover, White (Shipped Loose)

0 WH-LRSC-BLUE Ligature Resistant Seat Cover, Dignity Blue (Shipped Loose)

(743)

(375)

6 7

FLOOR WASTE

5 MODEL #WH2142-ADA-W-3

WALL WASTE

MODEL #WH2142-ADA-W-2

GRAB BAR

BY OTHERS

10"

1 (254)

(467)

1. WALL MOUNTING HARDWARE BY

OTHERS

2. -3, FLOOR WASTE OUTLET SHOWN)

3. EXTERIOR SURFACES POWDER

COATED WHITE

4. ACCESS PANELS (BOTH SIDES)

5. WH2898 FLUSH VALVE

ACCESS PANEL w/ HYDRAULIC

FLUSH VALVE SHOWN

6. WH-LRSC-GRAY WHITEHALL

LIGATURE RESISTANT ABS TOILET

SEAT COVER

7. INTERIOR OF TOILET w/ SATIN

FINISH (NOT POWDER COATED)

MODEL# WH2142-ADA-W-3_10 SHOWN

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

assumes no responsibility for use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 591-9280 • (626) 968-6681

IMPORTANT!

TOILETS ARE SUPPORTED ON THE

FLOOR AND BOLT TO REINFORCED

WALL. FIXTURES ARE NOT INTENDED

FOR USE WITH TOILET CARRIERS.

Sloan 10500 Seymour Ave, Franklin Park, IL 60131

Phone: 800.982.5839 • Fax: 800.447.8329 • sloan.com

Code 3787926 • Downloaded 11/12/24 • Revised 06/21/24 • View Latest Version

SLOAN® MANUAL SPECIALTY FLUSHOMETER

SLOAN 952-1.6-MBPM

CODE NUMBER

3787926

DESCRIPTION

1.6 gpf, Rough Brass Finish, Fixture Connection Rear Spud, Single

Flush, 2-10.75 L Dimension, Metal Button Panel Mount Push Button, Standard (not included, order separately) Wall Box, Sloan® Concealed

Manual Specialty Water Closet Hydraulic Flushometer.

DETAILS

Flush Volume: 1.6 gpf (6.0 Lpf)

Finish: Rough Brass

Valve: Diaphragm

Valve Body Material: Semi-red Brass

Fixture Type: Water Closet

Fixture Connection: Rear Spud

Rough-In Dimension: 33" (838mm)

Spud Coupling: 1 ½" (38mm)

Supply Pipe: 1" (25mm)

L Dimension: 2"– 10 ¾" (51 – 273mm)

Wall Box: Standard (not included, order separately)

Push Button: Metal Button Panel Mount (MBPM)

FEATURES

High Chloramine Resistant PERMEX® Synthetic Rubber Diaphragm with Linear Filtered Bypass and Vortex Cleansing ActionTM

HY-108-A Hydraulic Push Button

Fixed Metering Bypass and No External Volume Adjustment to

Ensure Water Conservation.

Handle Packing, Main Seat, Stop Seat and Vacuum Breaker Molded from PERMEX® Rubber Compound for Chloramine resistance

Vacuum Breaker

Adjustable Tailpiece

1” I.P.S. Wheel Handle Bak-Chek® Angle Stop

Includes HY108A Push Button Assembly

COMPLIANCES & CERTIFICATIONS

(ADA Compliant, BAA Compliant, BABAA Compliant, cUPC

Certified, UPC Certified)

RECOMMENDED SPECIFICATION

Valve Body, Cover, Tailpiece and Control Stop shall be in conformance with ASTM Alloy Classification for Semi- Red

Brass. Valve shall be in compliance with the applicable sections of ASSE 1037 and ANSI/ASME 112.19.2.

VALVE OPERATING PRESSURE (FLOWING)

15 – 80 PSI (103 – 552 kPa). Specific fixtures may require greater minimum flowing pressure - consult manufacturer requirements.

DOWNLOADS

Royal/Regal Series 900 Hydraulic Installation Instructions

Control Stop Repair and Maintenance Guide

Flush Connections Flanges Repair and Maintenance Guide

Tail Piece Repair and Maintenance Guide

Series 900 Flushometers Repair and Maintenance Guide

Hydraulic Push Button Options

Additional Downloads

NOTES

All information contained within this document subject to change without notice.

Looking for other variations of the SLOAN 952 product? View the general spec sheet with all options.

Find a compatible urinal for this flushometer.

Find a compatible water closet for this flushometer.

WARRANTY

View Warranty Information

Variation Not Shown: Metal Button Panel Mount Actuator https://www.sloan.com/ https://www.sloan.com/spec-sheet/3787926 https://www.sloan.com/sites/default/files/2017-11/II0816301Rev5.pdf https://www.sloan.com/sites/default/files/2024-07/Control%20Stop%20Repair%20and%20Maintenance%20Guide.pdf https://www.sloan.com/sites/default/files/2024-09/Flush%20Connections%20Flanges%20Repair%20and%20Maintenance%20Guide.pdf https://www.sloan.com/sites/default/files/2024-07/TailpieceRepairAndMainenanceGuide.pdf.pdf https://www.sloan.com/sites/default/files/2024-06/Series%20900%20Flushometers%20Repair%20and%20Maintenance%20Guide.pdf https://www.sloan.com/sites/default/files/2022-09/HydraulicPushButtonOptions.pdf https://www.sloan.com/commercial-bathroom-products/flushometers/sloan/sloan-952#downloads https://www.sloan.com/general-spec/1966 https://www.sloan.com/general-spec/1966 https://www.sloan.com/general-spec/1966 https://www.sloan.com/commercial-bathroom-products/urinals https://www.sloan.com/commercial-bathroom-products/water-closets https://www.sloan.com/resources/product-resources/warranty-information

Sloan 10500 Seymour Ave, Franklin Park, IL 60131

Phone: 800.982.5839 • Fax: 800.447.8329 • sloan.com

Code 3787926 • Downloaded 11/12/24 • Revised 06/21/24 • View Latest Version

SLOAN® MANUAL SPECIALTY FLUSHOMETER

SLOAN 952-1.6-MBPM

ROUGH-IN

https://www.sloan.com/ https://www.sloan.com/spec-sheet/3787926

WHFD-5RD-2NH-SS

Ligature Resistant Floor Drains

Stainless Steel Strainer and Grate

Ligature resistant floor drains are designed with an internal gusset system that helps prevent ligature points. Recommended for use in showers, bathrooms, kitchens and other areas where foot traffic is expected. The round top strainer head is used for all types of poured finished floors. The square top is particularly adaptable to floors that are finished in square or straight line patterns.

Reversible flashing collar permits adjustment of strainer to meet finished floor level.

BASE MODEL NUMBER (Must Specify)

ROUND

0 WHFD-5RD-2NH-SS 5” Round Floor Drain, Stn Stl Strainer and Grate

0 WHFD-6RD-2NH-SS 6” Round Floor Drain, Stn Stl Strainer and Grate

SQUARE

0 WHFD-5SQ-2NH-SS 5” Square Floor Drain, Stn Stl Strainer and Grate

0 WHFD-6SQ-2NH-SS 6” Square Floor Drain, Stn Stl Strainer and Grate

LOW

POSITION

XX-MIN

MAX 7

9" [229]

B DIA OR SQ

HIGH

POSITION

X-MIN

" [32]

4" [102]

" [60]

SEEPAGE OPENING

B B

**64" [171]

6 2

1. Ligature Resistant Type 304 Stainless Steel Strainer

2. Vandal Resistant Screws

3. Adjustable Height Nickel Bronze Strainer Head

4. Reversible Duco Cast Iron Flashing Collar 1 1

5. JR SMITH - Duco Cast Iron 2" No Hub Drain Body

6. 6 Strainer Slots = 1.81in² Free Area

7. Ligature Resistant Baffle

Member of

DISCLAIMER:

This product is designed to decrease the probability that it may be utilized as an apparatus for ligature.

It is not a replacement for professionals who are trained in the proper evaluation, management and supervision of persons at risk of suicide.

U.S. Green Building Council

Recyclable Product

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

All dimensions are nominal and subject to manufacturer's change without notice. Whitehall assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681 • Fax (626) 855-4862

WHFD-SS

Revised: 11/30/20

STRAINER

SIZE

*COLLAR IN

HIGH POSITION

*COLLAR IN

LOW POSITION

FREE AREA

SQ IN (SQ CM)

B

DIA OR SQ

X

MIN MAX

XX

MIN MAX

5" (127) 1-1/4" (32) 2-1/4" (57) 3/4" (19) 1-5/8" (41) 1.81 / 11.7

6" (152) 1-1/4" (32) 2-1/4" (57) 3/4" (19) 1-5/8" (41) 1.81 / 11.7

FD-4 9.6 FLOOR DRAIN

CALL SWITCH

Stainless steel vandal resistant call button

MOUNTING

Call button mounts over standard single-gang electrical box with minimum depth of 2 inches and fasten in place using the two #6-32 screws provided.

ENVIRONMENT

Suitable for indoor installations

HOUSING AND FINISH

4.50in H x 2.75in W x 1.50in D (11.43cm x 6.99cm x 3.81cm) Weight: 0.20lbs (0.09kg) Shipping Weight: 0.60lbs (0.27kg)

SPECIFICATIONS

V-2976 Red Emergency Call Switch

• Fits a single-gang electrical box

• No external power source required

• Stainless steel vandal-resistant call button

• “EMERGENCY ONLY” screened in white lettering below the call button

• 18 gauge steel plate finished in high-gloss red enamel

• Indoor use

Description:

The V-2976 Red Emergency Call Button is designed to be used with Talkback Page Control Units with the remote calling feature. The V-2976 provides a vandal-resistant momentary spring return switch for connection to customer provided signaling equipment.

The Red Emergency Call Switch, model V-2976 shall be a vandal resistant momentary spring return switch for connection to customer provided signaling equipment

The V-2976 Red Emergency Call Switch plate shall be constructed of 18 gauge steel and finished in high-gloss red enamel and shall have EMERGENCY ONLY” screened in white lettering below the call button. The V-2976 mounts in a single gang electrical box and is suitable for indoor applications.

The maximum dimensions shall be: 4.50in H x 2.75in W x 1.00in D (11.43cm x 6.99cm x 3.81cm). Weight shall be approximately: 0.20lb (0.27kg).

Warranty information may be found on our website at www.valcom.

com/warranty.

2022 Rev 7.8.3

Specifications

SALES@VALCOM.COM VALCOM.COM

Vandal-Resistant

9.7 STAFF DISTRESS CALL BUTTON

mailto:SALES@VALCOM.COM

Dual Temperature, Piezo Button Faucet, Faucet, 4” Centerset

Ligature Resistant, Dual Temperature, Piezo Button Faucet is recommended for patient bathrooms and facilities where ligature risk is a concern. The Faucet is designed to be retrofitted to existing 4” centerset lavatory decks with 3-hole openings 1” to 1-1/2” diameter. Or can be provided with BestCare ligature resistant lavatories. The Faucet includes Dual

Temperature Piezo Buttons. Provided with a

0.5 GPM multi-stream laminar nozzle and a

chrome plated cast bronze Faucet body.

Valve 9VDC dual temp solenoid operated ADA compliant requiring less than 5lbs of force to operate. Valve is metering with a valve timing range of 0-60 seconds valve can be remotely located up to 10 feet. A 120VAC/9VDC plug-in transformer or a 6

AAA Battery Pack provided. Batteries not included.

water flow by compensating for pressure and temperature fluctuations. Factory set to 105°F (41°C) and field adjustable. Includes strainers and integral checks. Operating range is 30 to 100 PSI.

Optional -LFK Laminar Flow Restrictor

Kit to increase flow rate of Faucet. Kit includes Spanner Wrench to remove existing Nozzle and three different Laminar Flow

Restrictor replacements providing 1.2 GPM,

1.5 GPM, and 1.75 GPM.

Fixture is ADA Compliant. Unit conforms with ADA requirements for accessibility when correctly installed.

GUIDE SPECIFICATION

Provide and install ligature resistant Faucet (specify model number and options) Faucet shall be dual temperature (cold and tempered) with Piezo Button operation.

FAUCET P-937

9.8

(Use The Following For Basins Manufactured By Others) 0 -WH3378-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

(Use the Following For Whitehall BestCare® Basins) 0 -WH3378L-HC-PPZ Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet

0 -WH3378L-HC-PPZ-BAT Pushbutton Activated Spout w/ Piezo Buttons, Dual-Temperature Faucet, Battery Operated

(Batteries not included)

ACCESSORIES:

0 -WHST70-12

0 -LFK Laminar Flow Restrictor Kit (Provides 1.2 GPM, 1.5 GPM, and 1.75 GPM Flow Controls)

[184]

2 1

" [95]

CL

CL

2. 0.5 GPM MULTI-STREAM LAMINAR NOZZLE 10

3. LIGATURE RESISTANT PIEZO BUTTONS

assumes no responsibility fo use of void or superseded data © Whitehall Manufacturing, Member of Morris Group International.

Please visit www.whitehallmfg.com for most current specifications.

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

SELECTION SUMMARY & APPROVAL FOR MANUFACTURING

Model Number & Options Quantity

Company Date

Contact Title

Approval for Manufacturing/Signature

Whitehall Mfg. • P.O. Box 3527 • City of Industry, CA 91744 • (800) 782-7706 • (626) 968-6681

1/2” NPT ASSE 1070 Compliant Hot & Cold, Temperature / Pressure Balancing Mixing Valve

Visual Nurse Call 4000 Dual/Single Status

DE101CM

6.5 Nurse call button

Emergency Stations with Push Button or Drop Flag Actuation

E-101 & E-103/E-113

E-101 Push Button Emergency Station

Description: E-101 Push Button Emergency Station features a satin finish stainless steel faceplate with silk-screened designations. Stations can be used on single or dual status systems. They may be flush mounted on a standard outlet box with single gang rings, or surface mounted on Wiremold 5748 or equal with a depth requirement of 1 ¾ “. Incandescent lamps not acceptable. Field wiring terminations are with screw terminals for maximum 16-gauge wire.

Operation: A touch of the push button type switch on the E-101 Emergency station activated a call for help, verified by a red LED indicator. Calls can be cancelled by pushing the button again.

E-103/E-113 Push Button Emergency Station Description: E-103/E-113 stations feature satin finish stainless steel faceplates with silk-screened designations. They may be flush mounted on Wiremold 5748 or equal, with a depth requirement of 1 ¾”.

• E-103: May be used with dual status systems. Field wiring terminations are with screw terminals for maximum 16-guage wire.

• E-113: For single status only. Wire lead terminations.

Operation: A touch of the DPDT switch button on the UL listed E-103/E-113 Emergency Station initiates an emergency call, verified by mechanical flag drop. Calls may by cancelled by pushing the button again.

E-101 & E-103/E-113 Emergency Stations Mounting: The satin finish stainless steel faceplate with silk-screened designations may be flush mounted on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold 5748 or equivalent.

Engineering Specifications: The contractor shall furnish and install CORNELL Push Button Emergency Stations as indicated on the plans. Faceplates shall be satin finish stainless steel with silk -screened designations. Calls in progress (E-101) are indicated by a red LED. Calls in progress (E-103/E-113) are indicated by mechanical flag drop. Calls may be cancelled by pushing the button again. Stations shall be mounted on standard outlet boxes with single-gang rings or Wiremold 5748 or equal.

Technical Information:

• Power Requirements: 24VDC

• Operating Environment: 50-120°F Indoor Non-condensing

• Physical Faceplate Dimensions: 4 ½ ”H x 2 ¾ ”W (Standard 1 Gang)

• Mounting: Single-Gang back box with 1¾” minimum depth

• Wiring: #22 AWG Minimum, #16 AWG Maximum

E-103/E-113

E-101

9.9 NURSE CALL BUTTON

Available in 1-6 gang sizes:

*stations are only UL Listed in the 1 gang size

* For correct part number, change first number (1) to gang size needed

6.6 security cameras

H5A CORNER CAMERA 3 - 9 MM VARIFOCAL LENS

3 MP 5 MP

The Avigilon H5A Corner camera is an anti-ligature, no-grip and IK10+ impact-rated solution that is purpose-built to withstand the harshest attempts to destroy, detach, attach to or disable it. As an Avigilon H5 platform camera, the H5A

Corner camera is embedded with Next-Generation Video Analytics for enhanced object detection and classification, Unusual

Activity Detection (UAD), along with support for Facial Recognition technology and Avigilon Appearance Search™ technology to help ensure critical events do not go unnoticed.

FEATURES

NEXT-GENERATION VIDEO ANALYTICS

Detects more objects with expanded object classification and greater accuracy for faster responses, even in crowded scenes.

H.264 AND H.265 WITH HDSM SMARTCODEC™

TECHNOLOGY

Optimizes compression levels for regions in a scene to help maximize bandwidth savings and keep internet connectivity costs down.

FIPS 140-2 COMPLIANT

Brings increased data security with FIPS-compliant cryptography enabled on cameras1.

ONVIF® COMPLIANT

ONVIF Profile S, T, G, and M compliance allows easy integration with existing ONVIF infrastructures.

AUDIO RECORDING CAPABILITIES

Records audio evidence via a built-in microphone that can be disabled if desired.

EASY TO CLEAN & REPAIR

Stainless steel variant and water-resistant design makes it easy to clean. Part replacements are simple using conventional tools without having to remove the entire camera, minimizing downtime.

WATER, IMPACT & ENCLOSURE RATED

IP67 rating for water resistance, IK10+ impact rating for vandal resistance and NEMA 4X enclosure rating2 for windblown dust,…