Mil STD 53022 and Mil-PRF-85285.doc
DOC document 51 KB Posted
- Attached to
- Corrosion Control Painting of Storage Tanks
- Solicitation number
- culler_F3P3BA2019A001
About this file
SEE ATTACHMENT
View the file
Other files
Show all 15
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 2
· MILMIL-PRF-23377J Type 1 Class 2
MIL-PRF-23377J, Type II, Class 2 is a two component 2.8 lb/gal VOC compliant, epoxy polyamide primer. It meets MIL-PRF-23377J , Class 2 composition and performance specification. It is used as a primer under MIL-PRF-85285D polyurethane topcoats, or polyurethane chemical agent resistant coatings (CARC) specified in MIL-DTL-53030B, MIL-DTL-64159 or MIL-PRF-22750 epoxy topcoats.
Product Features
· 2.8 lb/gal VOC.
· Fast drying.
· Excellent chemical, solvent, and corrosion resistance.
· For aluminum with chromate conversion coating or anodized aluminum, it offers excellent filiform resistance.
· Excellent hold out for high gloss topcoats.
· View Full Screen
| Product Number |
| Color |
| Size* |
| MSDS |
| PDS |
| EDS |
| E90G203 |
| Type 1 Yellow |
| 1 Gallon |
| MSDS |
| PDS |
| EDS |
MILGUARD-53022
CORROSION INHIBITING
L&C FREE EPOXY PRIMER
Description: Milguard-53022 is a Corrosion Inhibiting Epoxy Polyamide Coating intended for use on properly cleaned and pretreated ferrous and non-ferrous substrates. It is a lead and chromate free primer that may be used to replace MIL-P-52192 and MIL-PRF-23377 where exposure to Lead & Chromate pigments is not permitted.
Recommended Uses: For use over Aluminum and Steel substrates to provide chemical and corrosion resistance.
Conformance: This Product complies with Military Specification MIL-DTL-53022B, Type-I & II
Technical Data
| Generic Type: |
| Epoxy Resins and Aliphatic Polyamine |
| Color & Finish: |
| White, Gray & Pastel Shades; Lusterless |
| Flash Point: |
| 100º F |
| Weight Solids: |
| 88 ± 1% |
| Volume Solids: |
| 75 ± 2% |
| VOC: |
| Approx 1.70 Lbs./Gal. or 205 Grms./Ltr. |
| Recommended DFT |
| 4-6 Mils |
| Theoretical Coverage @ 1 mils: |
| Approx. 1200 sq/ft |
| Mix Ratio: |
| 4 Parts by Volume of Epoxy, Component-A to One Part by Volume of Hardener, Comp-B |
| Pot Life: |
| 3-4 hours |
| Pot Life: |
| 3-4 hours |
| Shelf Life: |
| 24 months |
Drying Time @ 75º F:
| To Touch: |
| 30 min |
| To handle: |
| 4 hours |
| To topcoat: |
| 6 hours |
| To service: |
| 3 days |
| Reducer/Clean-up: |
| Thinner # MIL-P-24441 |
| Packaging: |
| 5's/1's |
Surface Preparation:
A.) Iron & Steel:
All surfaces to be coated must be dry and cleaned free of rust, oil, dirt, soil and other contaminants. For general use steel should be blast cleaned to a minimum of commercial grade SSPC SP-6". For severe service and sustained immersion, "Near White" SSPC SP-10 is recommended.
B.) Aluminum:
Remove all oil, grease, dirt, oxide and other foreign material by solvent cleaning per SSPC-SPI.
For best results apply when surface temperature is above 50 ºF (10ºC) and a minimum of 5 ºF (3 ºC) above the dew point, and relative humidity is no greater than 85%.
Application Data:
Spray recommended. Brush or roller may be used with additional thinning required. Care should be taken to achieve required film build.
Conventional Spray:
DeVilbiss MBC-510 spray gun "E" Fluid Tip #704, #765 or #78 Air Cap.
Airless Spray:
Use of spray tips with 0.015" to 0.021" orifice is suggested depending on available pressure and job conditions, with a minimum of 2800 PSI tip pressure.
Safety Precautions:
(A) Use normal precautions such as gloves, facemasks.
(B) Adequate ventilation must be maintained.
(C) Explosion proof lights & electrical equipment.
(D) Non-Sparking shoes & tools for workers in area.
(E) This product contains flammable materials. Forbid all flames, smoking and welding in work area.
(F) Avoid breathing of vapor, contact with skin or eyes. If product comes in contact with skin or eyes, wash thoroughly with water and obtain medical attention.
Mil-PRF-23377F Epoxy Primer am1
MIL-PRF-23377 H
Mil-P-53022B Epoxy Primer, White
Mil-P-53030A Epoxy Primer, White Water Base am 2 DOD-P-15328D Wash Primer
Mil-PRF-85285C Polyurethane, Hi Solids
Mil-PRF-22750F Epoxy Coating, High Solids
Mil-PRF-85582C Epoxy Primer, Waterborne
TT-E-529G Alkyd
Mil-L-81352C/ ss by: Lacquer
Mil-L-19538C notice1- Cancellation
Mil-P-14105D Hi Heat Resistant Paint (for steel surfaces)
Mil-T-81772B Solvent Reducers for Coatings am1
File details come from the government source that posted it. Updated .