Combined Synopsis.pdf

N0024426Q0043 2 Kits of 36K Defense Airlift Modular Approach Shoring (DAMAS)

ATTLA Certified Issued on: 08 June 2026

COMBINED SYNOPSIS/SOLICITATION FOR COMMERCIAL ITEMS

This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in Revolutionary FAR Overhaul (RFO) Federal Acquisition Regulation (FAR) subpart 12.201-1, “Simplified Procedures,” as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; “quotations” are being requested, and a separate written solicitation document will not be issued.

The solicitation number N0024426Q0043 is being issued as a Request for Quote (RFQ). RFQ N0024426Q0043 shall be used to reference any written quote provided under this solicitation. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular (FAC) 2026-01 published in the Federal Register on 13 March 2026. Small business joint venture quoters have to submit the joint venture representations at paragraph (c) of FAR solicitation provision 52.219-1, Small Business Program Representations, with each offer.

This is a Total Small Business Set-Aside competition requirement. The North American Industry Classification System (NAICS) code for this project is 332999 - Fabricated Structural Metal Manufacturing with a size standard of 750 Employees.

All interested companies shall provide a quotation for:

Maritime Expeditionary Security Group ONE (MESG-1) requires Two (2) Kits Air Transport Test Loading Activity (ATTLA) certified Defense Airlift Modular Approach Shoring (DAMAS) rated for 36,000-lb (36K) Axles, with a 3.5-to-one safety factor. The legacy method of using heavy, wood-based shoring is logistically burdensome, requires significant personnel and time to assemble, and is prone to damage and customs delays.

Question Due Date: June 12, 2026 at 11:00 AM Local Time

Submission Due Date: June 18, 2026 at 11:00 AM Local Time

Required Delivery Date: on or before August 28, 2026

Place of Performance: NOLF Imperial Beach, 1498 13th Street, BLDG 170, Imperial Beach, CA 91932

Notice Regarding the Nonmanufacturer Rule and Buy American Act:

Because this small business set-aside is valued below the Simplified Acquisition Threshold, the Small Business Administration's Nonmanufacturer Rule does not apply; Quoters may supply an end product manufactured by a business of any size. Furthermore, as this requirement is for a Commercially Available Off-the-Shelf (COTS) item, the Buy American Act component test is waived per FAR 25.101(a)(2). To be eligible for award without evaluation penalties, the proposed COTS item simply must be manufactured in the United States or a DFARS Qualifying Country (DFARS 225.872-1).

Please see attached Statement of Work (SOW) for further details.

ADDENDUM TO FAR 52.212-1 INSTRUCTIONS TO QUOTERS

Addendum to FAR 52.212-1(a), Submission of quotes. This paragraph is tailored as follows:

Provision at 52.212-1, Instructions to Quoters—Commercial, applies to this acquisition. Note below that an addendum to the provision 52.212-1(a) has been incorporated into solicitation N0024426Q0043.

Introduction and Purpose: This section specifies the format that Quoter shall use in this RFQ. The intent is not to restrict the quoters in the manner in which they will perform their work but rather to ensure a certain degree of uniformity in the format of the responses for evaluation purposes.

The Government anticipates award of single Firm Fixed Price (FFP) contract resulting from this solicitation. All responses to solicitation N0024426Q0043 identify the Quoter’s agreement with all terms, conditions, and provisions included in this solicitation. Offers that fail to furnish required representations or information or reject the terms and conditions of the solicitation will be excluded from consideration.

Each attachment shall contain the following items in addition to the other information required by this solicitation:

Quote: The quote shall indicate the following:

• Title of the Quote

• RFQ Number

• Name and address of Quoter, Cage Code, and UEID

• Quote validity period for 30 days from solicitation closing

• FACTOR I – Technical Specification of the DAMAS ATTLA Certified

• FACTOR II- Price

Quoters are advised to submit Quotes that are complete and clear in all respects without a need for additional explanation or information. Quoters are cautioned against general, vague, or insubstantial statements that prevent or render difficult the concise evaluation of the quote. The quote must be sufficient and complete to demonstrate how the Quoter proposes to comply with the contract requirements.

Brochuremanship is not desired; clarity and completeness are essential. Quoters are cautioned against restating SOW requirements in their quote, particularly with regard to technical requirements and must state how all RFQ and SOW requirements will be met. Statement such as “the Quoter understands” and “the Quoter shall/can comply,” along with responses that paraphrase the RFQ, are inadequate. The use of phrases such as “standard practices” (with a specific Government reference or industry reference) does not indicate that a Quoter understands the requirements and will result in a unacceptable evaluation.

Submission of commercial product specification sheets or technical manuals that clearly map to the SOW requirements is highly encouraged.

The proposed 36K DAMAS Ramp System must be ATTLA Certified prior to delivery. Quoters must either: (1) Provide a copy of the current, approved ATTLA Certification letter for the proposed system;

OR (2) If not currently certified, provide a detailed, realistic milestone plan demonstrating how the Quoter will successfully navigate the Air Force ATTLA certification process and obtain the required certification prior to the August 28, 2026 delivery date. Quotes that fail to provide proof of certification or a realistic plan to obtain it will be evaluated as unacceptable.

All inquiries regarding this solicitation must be submitted directly to the Contract Specialist via email.

While the Government will make every effort to provide timely responses and make them publicly available, questions submitted close to the closing date may not allow sufficient time for a response.

Accordingly, all quoters are directed to submit their questions no later than 11:00 AM San Diego, California time on June 12, 2026. Please note that all formal answers will be published on SAM.gov, and it remains the sole responsibility of the vendor to monitor SAM.gov for updates and amendments.

This combined synopsis/solicitation will close at 11:00 AM (PST) San Diego, California Time on June 18, 2026. Submit vendor quote to the Contract Specialist, ODINI RAMOS and DIONTE GRAYS via email to the address odini.n.ramos.mil@us.navy.mil and dionte.l.grays.civ@us.navy.mil and stating - Solicitation N0024426Q0043, 2 Kits of 36K DAMAS ATTLA Certified.

(End of provision)

ADDEMDUM TO FAR 52.212-2 EVALUATION-COMMERCIAL ITEMS

(a) The Government will make a single award to the responsible Quoter using comparative evaluation of quotation in accordance with RFO FAR 12.203(c)(2). The evaluation procedures are not subject to part 15 or 14. The contracting officer is not required to have evaluation plans, score quotations, or establish competitive range before communicating with quoters or soliciting revised quotations. The Government intends to award on initial quotes but reserves the right to conduct exchanges. The following factors shall be used to evaluate quotes:

Factor I – Technical Specification of the DAMAS ATTLA Certified (Do Not Include Pricing Info) Factor II – Price

Award will be made to the responsible offeror whose offer, conforming to the solicitation requirements, is determined to be the most advantageous to the Government, price and other factors considered. The acquisition will utilize a comparative evaluation IAW FAR 12.203(c)(2) to make a best value award decision.

IAW FAR 2.101, Best value means the expected outcome of an acquisition that, in the Government's estimation, provides the greatest overall benefit in response to the requirement.

Step 1: The Government will first rank all timely received quotes by Total Evaluated Price, from lowest to highest. An initial competitive pool of contractors to be evaluated will be established by evaluating the three (3) lowest priced offers. The government may, at its sole discretion, expand the competitive pool by any number of additional offerors at any stage of the procurement process as many times as it sees fit. If the competitive pool is to be expanded by less than the total number of responsible offerors, inclusion will be based on lowest price. Therefore, each initial offer should contain the offeror’s best terms from a price and technical standpoint.

mailto:odini.n.ramos.mil@us.navy.mil mailto:dionte.l.grays.civ@us.navy.mil

Award will be made to the responsible offeror, in accordance with FAR Part 9.1, whose offer conforms to the solicitation requirements and is determined to be the Best Value Offeror after performing a comparative evaluation, where price and other factors are considered.

Step 2: To make a determination of Best value, the Government shall first perform a side-by-side comparative analysis (comparing contractor responses to one another) of the submission of each Offeror in the competitive pool. Then, the Government will compare the submission of each Offeror in the competitive pool considering price and performance benefits (if any), to determine the overall Best offeror. The non-price factors are approximately equal in importance to each other and when combined, are equal in importance to Price. The Government reserves the right to consider an offer other than the lowest price that provides additional benefit(s).

The Government intends to award this contract based on initial offers. Therefore, the Offeror's initial offer should contain the Offeror's best terms from a cost or price and technical standpoint.

However, the Government reserves the right to have exchanges and request revised offers. The Government may limit the number of offerors it engages with exchanges for purposes of efficiency at its discretion.

Notice to Vendor(s): The Government reserves the right to cancel this solicitation, either before or after the closing date of receipt of quotations. In the event the Government cancels this solicitation, the Government has no obligation to reimburse the vendor for any costs.

(End of text)

DOCUMENT NUMBER

N0024426Q0043

CLAUSES INCORPORATED BY REFERENCE

CLAUSE

NO

ALT NO/

DEV NO

CLAUSE TITLE YEAR-

MO

SECTION

252.203-7000 Requirements Relating to Compensation of Former DoD Officials.

2011-09 SEC I

252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I

252.203-7005 Representation Relating to Compensation of Former DoD Officials.

2022-09 SEC K

252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

2023-01 SEC I

252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I 252.225-7001 Buy American and Balance of Payments Program. 2024-02 SEC I 252.225-7002 Qualifying Country Sources as Subcontractors. 2022-03 SEC I

252.225-7055 Representation Regarding Business Operations with the Maduro Regime.

2022-05 SEC K

252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.

2023-01 SEC I

252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.

2023-06 SEC K

252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.

2023-06 SEC I

252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.

2018-12 SEC G

252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I

52.203-18 Prohibition on Contracting with Entities that Require Certain

Internal Confidentiality Agreements or Statements- Representation.

2017-01 SEC L

52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.

2017-01 SEC I

52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038)

2026-02 SEC I

52.204-7 System for Award Management-Registration. (Deviation 2026- O0038)

2026-02 SEC L

52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038)

2026-02 SEC I

52.209-6 Protecting the Government's Interest When Subcontracting

With Contractors Debarred, Suspended, Proposed for Debarment, or Voluntarily Excluded. (Deviation 2026-O0038)

2026-02 SEC I

52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02 SEC L

52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-02 SEC I

52.214-34 Submission of Offers in the English Language. 1991-04 SEC L 52.214-35 Submission of Offers in U.S. Currency. 1991-04 SEC L

52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026- O0038)

2026-02 SEC I

52.222-19 Child Labor-Cooperation with Authorities and Remedies.

(Deviation 2026-O0038)

2026-03 SEC I

52.222-3 Convict Labor. (Deviation 2026-O0038) 2026-02 SEC I

52.222-36 Equal Opportunity for Workers with Disabilities. (Deviation 2026-O0038)

2026-02 SEC I

52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) 2026-02 SEC I

52.222-90 Addressing DEI Discrimination by Federal Contractors.

(Deviation 2026-O0040, Revision 1)

2026-04 SEC I

52.223-23 Sustainable Products. (Deviation 2026-O0038) 2026-02 SEC I

52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.

2024-05 SEC I

52.232-33 Payment by Electronic Funds Transfer-System for Award Management.

2018-10 SEC I

52.232-40 Providing Accelerated Payments to Small Business Subcontractors.

2023-03 SEC I

52.233-3 Protest after Award. (Deviation 2026-O0038) 2026-02 SEC I

52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038)

2026-02 SEC I

52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-O0038)

2026-02 SEC K

52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) 2026-02 SEC I

52.244-6 Subcontracts for Commercial Products and Commercial Services. (Deviation 2026-O0038)

2026-04 SEC I

52.232-39 Unenforceability of Unauthorized Obligations. 2013-06 SEC I 252.204-7003 Control of Government Personnel Work Product. 1992-04 SEC I

252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors.

2023-01 SEC L

252.225-7048 Export-Controlled Items. 2013-06 SEC I

52.204-19 Incorporation by Reference of Representations and Certifications.

2014-12 SEC I

52.219-3 Notice of HUBZone Set-Aside or Sole-Source Award.

(Deviation 2026-O0038)

2026-02 SEC I

52.222-20 Contracts for Materials, Supplies, Articles, and Equipment.

(Deviation 2026-O0038)

2026-02 SEC I

52.232-23 Assignment of Claims. 2014-05 SEC I 52.233-2 Service of Protest. (Deviation 2026-O0038) 2026-02 SEC L 52.242-17 Government Delay of Work. 1984-04 SEC F 52.247-34 F.o.b. Destination. 1991-01 SEC F

252.204-7000 Disclosure of Information. 2016-10 SEC I

252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.

2016-10 SEC K

252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC L 252.204-7020 NIST SP 800-171 DoD Assessment Requirements. 2023-11 SEC I 252.204-7022 Expediting Contract Closeout. 2021-05 SEC I

252.209-7004 Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism.

2019-05 SEC I

252.211-7008 Use of Government-Assigned Serial Numbers. 2010-09 SEC I

252.215-7010 Requirements for Certified Cost or Pricing Data and Data Other Than Certified Cost or Pricing Data.

2024-05 SEC L

252.225-7012 Preference for Certain Domestic Commodities. 2022-04 SEC I 252.225-7031 Secondary Arab Boycott of Israel . 2005-06 SEC K

252.227-7015 Technical Data-Commercial Products and Commercial Services.

2025-01 SEC I

252.227-7037 Validation of Asserted Restrictions on Technical Data. 2025-01 SEC I 252.243-7001 Pricing of Contract Modifications. 1991-12 SEC I

252.225-7972 DEV 2024-O0014 Prohibition on the Procurement of Foreign-Made Unmanned Aircraft Systems. (DEVIATION 2024-O0014)

2024-08 SEC I

CLAUSES IN FULL TEXT

CLAUSE

NO

CLAUSE TITLE ALT NO/

DEV NO

YEAR-

MO

CLAUSE TEXT

252.204-7017 Prohibition on the Acquisition of Covered Defense

Telecommunications Equipment or Services-Representation.

2021-05

PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS

EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)

The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."

(a) . "Covered defense telecommunications equipment or services," "covered mission," Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.

(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018 Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.

(c) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.

(d) . If in its annual representations and certifications in SAM the Offeror has Representation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:

The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.

(e) . If the Offeror has represented in paragraph (d) of this provision that it "will Disclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:

(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).

(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.

(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).

(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).

(End of provision)

252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01

WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)

(a) As used in this clause- Definitions.

"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.

"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).

"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.

"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(b) The WAWF system provides the method to electronically process Electronic invoicing.

vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.

(c) To access WAWF, the Contractor shall- WAWF access.

(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and

(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.

(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.

Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/

(e) Document submissions may be via web entry, WAWF methods of document submission.

Electronic Data Interchange, or File Transfer Protocol.

(f) The Contractor shall use the following information when WAWF payment instructions.

submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:

(1) The Contractor shall submit payment requests using the following Document type.

document type(s):

(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.

(ii) For fixed price line items-

(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.

Invoice and Receiving Report (Combo)

(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)

(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.

N/A

(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)

(iii) For customary progress payments based on costs incurred, submit a progress payment request.

(iv) For performance based payments, submit a performance based payment request.

(v) For commercial financing, submit a commercial financing request.

(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.

[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]

(3) The Contractor shall use the information in the Routing Data Table Document routing.

below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.

Routing Data Table*

Field Name in WAWF Data to be entered in WAWF

Pay Official DoDAAC N50082

Issue By DoDAAC N00244

Admin DoDAAC N00244

Inspect By DoDAAC R57092

Ship To Code R57092

Ship From Code N/A

Mark For Code N/A

Service Approver (DoDAAC) N/A

Service Acceptor (DoDAAC) N/A

Accept at Other DoDAAC N/A

LPO DoDAAC N/A

DCAA Auditor DoDAAC N/A

Other DoDAAC(s) N/A

(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")

(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)

(4) The Contractor shall ensure a payment request includes documentation Payment request.

appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.

(5) The Contractor shall ensure a receiving report meets the requirements Receiving report.

of DFARS Appendix F.

(g) WAWF point of contact.

(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.

TBD After Award

(Contracting Officer: Insert applicable information or "Not applicable.")

(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.

(End of clause)

52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law.

(Deviation 2026-O0038) 2026-02

Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law (FEB 2026) (DEVIATION 2026-O0038)

(a) The Government will not enter into a contract with any corporation that-

(1) Has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability, where the awarding agency is aware of the unpaid tax liability, unless an agency has considered suspension or debarment of the corporation and made a determination that suspension or debarment is not necessary to protect the interests of the Government; or

(2) Was convicted of a felony criminal violation under any Federal law within the preceding 24 months, where the awarding agency is aware of the conviction, unless an agency has considered suspension or debarment of the corporation and made a determination that this action is not necessary to protect the interests of the Government.

(b) The Offeror represents that-

(1) It is is not a corporation that has any unpaid Federal tax liability that has been assessed, for which all judicial and administrative remedies have been exhausted or have lapsed, and that is not being paid in a timely manner pursuant to an agreement with the authority responsible for collecting the tax liability; and

(2) It is is not a corporation that was convicted of a felony criminal violation under a Federal law within the preceding 24 months.

252.204-7016 Covered Defense Telecommunications Equipment or Services-

Representation.

2019-12

COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-

REPRESENTATION (DEC 2019)

(a) . As used in this provision, "covered defense telecommunications equipment or Definitions services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.

(b) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) ( ) for entities excluded from receiving federal awards for https://www.sam.gov "covered defense telecommunications equipment or services".

(c) . The Offeror represents that it Representation does, does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.

(End of provision)

52.219-1 Small Business Program Representations. (Deviation 2026-

O0038) 2026-02

Small Business Program Representations (Feb 2026) (Deviation 2026-O0038)

(a) . As used in this provision-Definitions

Economically disadvantaged women-owned small business (EDWOSB) concern means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300. It automatically qualifies as a women-owned small business concern eligible under the WOSB Program.

HUBZone small business concern means a small business concern that meets the requirements described in 13 CFR 126.200, is certified by the Small Business Administration (SBA) and designated by SBA as a HUBZone small business concern in the Small Business Search (SBS) ( 13 CFR 126.103).

Service-disabled veteran-owned small business (SDVOSB) concern eligible under the SDVOSB Program means an SDVOSB concern that is designated in the System for Award Management (SAM) as certified by the Small Business Administration (SBA) in accordance with 13 CFR 128.300.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (b) of this provision.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly Affiliates controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

Small disadvantaged business concern means a small business concern that-

(1) Is at least 51 percent unconditionally and directly owned (as defined at 13 CFR 124.105) by one or more socially disadvantaged (as defined at 13 CFR 124.103) and economically disadvantaged (as defined at 13 CFR 124.104) individuals who are citizens of the United States, and

(2) The management and daily business operations of which are controlled (as defined at 13 CFR 124.106) by individuals who meet the criteria in paragraph (1) of this definition.

Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127) means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States, and the concern is certified by SBA or an approved third-party certifier in accordance with 13 CFR 127.300.

(b)

(1) The North American Industry Classification System (NAICS) code for this acquisition is ____ [insert NAICS code].

(2) The small business size standard is [insert size standard].____

(3) The small business size standard for a concern that submits an offer, other than on a construction or service acquisition, but proposes to furnish an end item that it did not itself manufacture, process, or produce ( , nonmanufacturer), is 500 employees, or 150 employees for information technology value-i.e.

added resellers under NAICS code 541519, if the acquisition-

(i) Is set aside for small business and has a value above the simplified acquisition threshold;

(ii) Uses the HUBZone price evaluation preference regardless of dollar value, unless the offeror waives the price evaluation preference; or

(iii) Is an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(c) Representations.

(1) The offeror represents as part of its offer that-

(i) it is, is not a small business concern; or

(ii) It is, is not a small business joint venture that complies with the requirements of 13 CFR 121.103(h) and 13 CFR 125.8(a) and (b). [ The offeror shall enter the name and unique entity identifier of ____________ each party to the joint venture: __.]

(2) [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of The offeror represents that itthis provision.] is, is not a women-owned small disadvantage business concern.

(3) The Women-owned small business (WOSB) joint venture eligible under the WOSB Program.

offeror represents as part of its offer that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ ____ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) The offeror Economically disadvantaged women-owned small business (EDWOSB) joint venture.

represents as part of its offer that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ ____ The offeror shall enter the name and unique entity identifier of each party to the joint venture: __.]

(5) . [SDVOSB joint venture eligible under the SDVOSB Program Complete only if the offeror is ]. The offeror represents as part of its offer that itcertified as a SDVOSB concern is, is not a SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The offeror shall enter the name and unique entity identifier of ____ each party to the joint venture:__.]

(6) [HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a ] The offeror represents, as part of its offer, that itHUBZone small business concern.

is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The offeror shall enter the name and unique entity identifier of each party to the joint venture: ____ __.] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern.

(d) Under 15 U.S.C. 645(d), any person who misrepresents a firm's status as a business Notice.

concern that is small, HUBZone small, small disadvantaged, service-disabled veteran-owned small, economically disadvantaged women-owned small, or women-owned small eligible under the WOSB Program in order to obtain a contract to be awarded under the preference programs established pursuant to section 8, 9, 15, 31, and 36 of the Small Business Act or any other provision of Federal law that specifically references section 8(d) for a definition of program eligibility, will be-

(1) Punished by imposition of fine, imprisonment, or both;

(2) Subject to administrative remedies, including suspension and debarment; and

(3) Ineligible for participation in programs conducted under the authority of the Act.

(End of provision)

52.219-4 Notice of Price Evaluation Preference for HUBZone Small

Business Concerns. (Deviation 2026-O0038) 2026-02

Notice of Price Evaluation preference for HUBZone Small Business Concerns (Feb 2026) (Deviation 2026-O0038)

Evaluation preference.(a)

(1) Offers will be evaluated by adding a factor of 10 percent to the price of all offers, except-

(i) Offers from HUBZone small business concerns that have not waived the evaluation preference; and

(ii) Otherwise successful offers from small business concerns.

(b) . A HUBZone small business concern may choose to waive the Waiver of evaluation preference evaluation preference. If the concern waives the preference, the factor will be added to its offer for evaluation purposes.

Offeror chooses to waive the evaluation preference.

(c) A HUBZone joint venture agrees that, in the performance of the contract, at least 40 Joint venture.

percent of the aggregate work performed by the joint venture shall be completed by the HUBZone small business parties to the joint venture. Work performed by the HUBZone small business parties to the joint venture must be more than administrative functions.

(End of provision)

52.219-28 Postaward Small Business Program Rerepresentation. (Deviation

2026-O0038) 2026-02

Postaward Small Business Program Rerepresentation (Feb 2026) (Deviation 2026-O0038)

(a) . As used in this clause-Definitions

Long-term contract means a contract of more than five years in duration, including options. However, the term does not include contracts that exceed five years in duration because the period of performance has been extended for a cumulative period not to exceed six months under the clause at 52.217-8, Option to Extend Services, or other appropriate authority.

Small business concern-

(1) Means a concern, including its affiliates, that is independently owned and operated, not dominant in its field of operation, and qualified as a small business under the criteria in 13 CFR part 121 and the size standard in paragraph (c) of this clause.

(2) , as used in this definition, means business concerns, one of whom directly or indirectly Affiliates controls or has the power to control the others, or a third party or parties control or have the power to control the others. In determining whether affiliation exists, consideration is given to all appropriate factors including common ownership, common management, and contractual relationships. SBA determines affiliation based on the factors set forth at 13 CFR 121.103.

(b) If the Contractor represented that it was a small business concern, a small disadvantaged business concern, or a joint venture that was any of the small business concerns identified in 19.000(a)(3) prior to award of this contract, the Contractor shall rerepresent its size and socioeconomic status according to paragraph (e) of this clause or, if applicable, paragraph (g) of this clause, upon occurrence of any of the following:

(1) Within 30 days after execution of a novation agreement or within 30 days after modification of the contract to include this clause, if the novation agreement was executed prior to inclusion of this clause in the contract.

(2) Within 30 days after a merger or acquisition that does not require a novation or within 30 days after modification of the contract to include this clause, if the merger or acquisition occurred prior to inclusion of this clause in the contract.

(3) For long-term contracts-

(i) Within 60 to 120 days prior to the end of the fifth year of the contract; and

(ii) Within 60 to 120 days prior to the date specified in the contract for exercising any option thereafter.

(c) The Contractor shall rerepresent its size status in accordance with the size standard in effect at the time of this rerepresentation that corresponds to the North American Industry Classification System (NAICS) code(s) assigned to this contract. The small business size standard corresponding to this NAICS code(s) can be found at https://www.sba.gov/document/support--table-size-standards.

(d) The small business size standard for a Contractor providing an end item that it does not manufacture, process, or produce itself, for a contract other than a construction or service contract, is 500 employees, or 150 employees for information technology value-added resellers under NAICS code 541519, if the acquisition-

(1) Was set aside for small business and has a value above the simplified acquisition threshold;

(2) Used the HUBZone price evaluation preference regardless of dollar value, unless the Contractor waived the price evaluation preference; or

(3) Was an 8(a), HUBZone, service-disabled veteran-owned, economically disadvantaged women-owned, or women-owned small business set-aside or sole-source award regardless of dollar value.

(e) Except as provided in paragraph (g) of this clause, the Contractor shall make the representation(s) required by paragraph (b) of this clause by validating or updating all its representations in the Representations and Certifications section of the System for Award Management (SAM) and its other data in SAM, as necessary, to ensure that they reflect the Contractor's current status. The Contractor shall notify the contracting officer in writing within the timeframes specified in paragraph (b) of this clause, that the data have been validated or updated, and provide the date of the validation or update.

(f) If the Contractor represented that it was other than a small business concern prior to award of this contract, the Contractor may, but is not required to, take the actions required by paragraphs (e) or (g) of this clause.

(g) If the Contractor does not have representations and certifications in SAM, or does not have a representation in SAM for the NAICS code applicable to this contract, the Contractor is required to complete the following rerepresentation and submit it to the contracting office, along with the contract number and the date on which the rerepresentation was completed:

(1) The Contractor represents that it is, is not a small business concern under NAICS Code assigned to contract number.____ ____

(2) [Complete only if the Contractor represented itself as a small business concern in paragraph (g) .] The Contractor represents that it(1) of this clause is, is not, a small disadvantaged business concern as defined in .13 CFR 124.1001

(3) . The Women-owned small business (WOSB) joint venture eligible under the WOSB Program Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __.]

(4) . The Economically disadvantaged women-owned small business (EDWOSB) joint venture Contractor represents that it is, is not a joint venture that complies with the requirements of 13 CFR 127.506(a) through (c). [ The ____ Contractor shall enter the name and unique entity identifier of each party to the joint venture: __ .]

(5) Service-disabled veteran-owned small business (SDVOSB) joint venture eligible under the . The Contractor represents that itSDVOSB Program is, is not an SDVOSB joint venture eligible under the SDVOSB Program that complies with the requirements of 13 CFR 128.402. [ The Contractor shall enter the name and unique entity identifier ____ of each party to the joint venture: __.]

(6) [ HUBZone joint venture eligible under the HUBZone Program. Complete only if the offeror is a ] The offeror represents, as part of its offer, that ItHUBZone small business concern.

is, is not a HUBZone joint venture that complies with the requirements of 13 CFR 126.616(a) through (c). [ The Contractor shall enter the name and unique entity identifier of each party to the joint ____ venture: .] Each HUBZone small business concern participating in the HUBZone joint venture must be certified as a HUBZone concern. [ Contractor to sign and date and insert authorized signer's name ____ and title.]

(End of clause)

52.252-1 Solicitation Provisions Incorporated by Reference. 1998-02

Solicitation Provisions Incorporated by Reference (FEB 1998)

This solicitation incorporates one or more solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at this/these address(es):

https://www.acquisition.gov/________[Insert one or more Internet addresses]

(End of provision)

52.252-2 Clauses Incorporated by Reference. 1998-02

Clauses Incorporated By Reference (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

https://www.acquisition.gov/ [Insert one or more Internet addresses]____ ____

(End of clause)

52.252-3 Alterations in Solicitation. 1984-04

Alterations in Solicitation (APR 1984)

Portions of this solicitation are altered as follows:

52.212-1 52.212-2 ____

(End of clause)

52.252-5 Authorized Deviations in Provisions. 2020-11

Authorized Deviations in Provisions (Nov 2020)

The use in this solicitation of any Federal Acquisition Regulation (48 CFR Chapter 1) provision (a) with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the provision.

The use in this solicitation of any [insert regulation name](48 CFR Chapter ) provision (b) DFARS 2 with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of provision)

52.252-6 Authorized Deviations in Clauses. 2020-11

Authorized Deviations in Clauses (Nov 2020)

The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter 1) (a) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the date of the clause.

The use in this solicitation or contract of any [insert regulation name] (48 CFR ) (b) DFARS Chapter 2 clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End of clause)

252.211-7003 Item Unique Identification and Valuation. 2023-01

ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)

(a) . As used in this clause- Definitions

"Automatic identification device" means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

"Concatenated unique item identifier" means-

(1) For items that are serialized within the enterprise identifier, the linking together of the unique identifier data elements in order of the issuing agency code, enterprise identifier, and unique serial number within the enterprise identifier; or

(2) For items that are serialized within the original part, lot, or batch number, the linking together of the unique identifier data elements in order of the issuing agency code; enterprise identifier;

original part, lot, or batch number; and serial number within the original part, lot, or batch number.

"Data matrix" means a two-dimensional matrix symbology, which is made up of square or, in some cases, round modules arranged within a perimeter finder pattern and uses the Error Checking and Correction 200 (ECC200) specification found within International Standards Organization (ISO) /International Electrotechnical Commission (IEC) 16022.

"Data qualifier" means a specified character (or string of characters) that immediately precedes a data field that defines the general category or intended use of the data that follows.

"DoD recognized unique identification equivalent" means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at .https://www.acq.osd.mil/asda/dpc/ce/ds/unique-id.html

"DoD item unique identification" means a system of marking items delivered to DoD with unique item identifiers that have machine-readable data elements to distinguish an item from all other like and unlike items. For items that are serialized within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier and a unique serial number. For items that are serialized within the part, lot, or batch number within the enterprise identifier, the unique item identifier shall include the data elements of the enterprise identifier; the original part, lot, or batch number; and the serial number.

" " means the entity (e.g., a manufacturer or vendor) responsible for assigning Enterprise unique item identifiers to items.

" identifier" means a code that is uniquely assigned to an enterprise by an issuing Enterprise agency.

"Government's unit acquisition cost" means-

(1) For fixed-price type line, subline, or exhibit line items, the unit price identified in the contract at the time of delivery;

(2) For cost-type or undefinitized line, subline, or exhibit line items, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery; and

(3) For items produced under a time-and-materials contract, the Contractor's estimated fully burdened unit cost to the Government at the time of delivery.

"Issuing agency" means an organization responsible for assigning a globally unique identifier to an enterprise, as indicated in the Register of Issuing Agency Codes for ISO/IEC 15459, located at http://www.aimglobal.org/?Reg_Authority15459.

"Issuing agency code" means a code that designates the registration (or controlling) authority for the enterprise identifier.

"Item" means a single hardware article or a single unit formed by a grouping of subassemblies, components, or constituent parts.

" or batch number" means an identifying number assigned by the enterprise to a Lot designated group of items, usually referred to as either a lot or a batch, all of which were manufactured under identical conditions.

"Machine-readable" means an automatic identification technology media, such as bar codes, contact memory buttons, radio frequency identification, or optical memory cards.

"Original part number" means a combination of numbers or letters assigned by the enterprise at item creation to a class of items with the same form, fit, function, and interface.

"Parent item" means the item assembly, intermediate component, or subassembly that has an embedded item with a unique item identifier or DoD recognized unique identification equivalent.

"Serial number within the enterprise identifier" means a…