B-36251 Exhibit D Specification for 45 Passenger People Convicted of Crimes Transport Buses 053123.docx

State of Illinois Department of Central Management Services State of Illinois Department of Central Management Services Exhibit D Exhibit D

Specifications for 45 Passenger People Convicted of Crimes Transport Bus

The following specifications describe the minimum requirements for a transport bus. The vehicle shall be new, of current design and manufacture and a production model. Any additions, deletions or variations from these specifications must be noted for review/approval by the State or the vehicle may be rejected at delivery. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise optioned.

Parts and service for the transport bus should be readily available in the State of Illinois.

Unless otherwise specified, the proposed equipment shall be complete in all parts and options ready for immediate use upon delivery.

Make:

Model:

Manufacturer:

The State reserves the right to waive minor informalities, deficiencies, or technical variance which by their nature are restrictive to a given manufacturer, if in its judgement, it would be in the best interest of the State. Transport buses must conform to the Federal Motor Vehicle Safety Standards and the Illinois requirements.

Specifications:

1. All standard equipment, no deletions

2. Flexible floor plans with ADA capability

3. Meets or exceeds Federal Motor Vehicle Safety Standards (FMVSS)

4. Vehicle must meet minimum clearance of 11 feet and 6 inches for underground parking structure

5. Camera with recording capacity

6. Wall behind driver to separate area between driver and passenger

7. Cage welded tubular steel cage

8. Wheelbase: 177 inches minimum

9. Gross Vehicle Weight Rating of 15,500 pounds minimum

10. Front axle: 4,600 pounds minimum

11. Rear axle: 9,500 pounds minimum

12. Front springs: 4,600 pounds minimum

13. Rear springs: 9,500 pound minimum

14. Battery: dual 600 CCA (minimum 1,200 CCA)

15. Engine 6.0-liter gasoline/diesel minimum, Hybrid, or Electric Engine

16. Engine oil cooler (not required on Electric engine)

17. Heavy duty radiator (not required on Electric engine)

18. Automatic transmission with overdrive (not required on Electric engine)

19. Driveshaft guards

20. Front and rear shock absorbers

21. Front and rear stabilizer bar

22. 4-wheel disc brakes with anti-lock system

23. 220 AMP alternator minimum (not required on Electric engine)

24. Dual rear wheels

25. Tires: LT225/75R16 all season radials

26. 32-gallon fuel tank (approximate—not required for Electric Engine)

27. Power steering

28. Intermittent windshield wipers with electric washers

29. In-dash heater and defroster

30. Temperature, oil pressure and coolant gauges

31. Voltmeter

32. Driver’s high back seat with lap and shoulder harness

33. Driver’s sun visor

34. Driver’s storage console with 12V power point

35. Driver’s side air bag

36. Driver’s cup holder

37. Driver’s seat air suspension with arms

38. OEM in-dash air conditioning

39. Tinted windshield and driver’s door glass

40. Aluminum or galvanized steel body construction

41. 1 ½ inch fiberglass or equal insulation in roof, side, and rear quarter panels

42. Bus body to be completely undercoated

43. 73-inch minimum interior headroom

44. Aluminized interior side panels below the windows

45. One-piece rub rails with weep holes to prevent condensation

46. Double out, panic free, manual control entrance door

47. Wrap-around anti-ride rear bumper

48. Rear fender extensions

49. Front and rear mudflaps

50. Snow rail at lower skirt

51. Roof mounted strobe light

52. Armored side turn signal lights

53. Rear turn signals

54. Stop signals

55. Minimum 7-inch x 10-inch flat with 7-inch x 4-inch convex rearview mirrors

56. Fender mounted cross-view mirrors

57. Two-step stepwell with light

58. Stainless steel grab handle at entrance steps

59. Minimum 4-inch header bumper pads over entrance and emergency doors

60. Minimum ½ inch minimum exterior grade plywood subfloor

61. Minimum 1/8-inch minimum rubber floor covering

62. Minimum 3/16-inch minimum rubber in aisle and on entrance steps

63. High back passenger seats and barriers

64. Seat belts in all passenger seats

65. Aisle molding in floor

66. Static roof vent

67. Standard manufacturer’s interior paint

68. Reflective striping around all emergency exits

69. Split sash side windows with 12-inch clear opening, minimally

70. Window stop decals

71. Tinted side and rear windows

72. Tinted rear ¼ glass

73. Curb side safety window

74. Circuit control board for all body circuits mounted in an accessible location

75. Body circuit relay disconnect

76. Accessory switch panel located to the right of the driver for easy access

77. Overhead driver’s storage compartment with swinging door

78. Minimum four (4) dome lights for passengers

79. Driver’s dome light on separate switch

80. ½ inch emergency door warning light and buzzer for driver

81. Back up alarm

82. Noise suppression switch

83. Rear air conditioning, minimum 55,000 BTU tie-in system with side mounted condenser, may be dealer installed

84. Rear heater of 50,000 BTU minimum

85. Heater shut-off valves

86. Heater bleed valves

87. Minimum 6-inch x 16-inch interior mirror

88. Certificate holder

89. AM/FM stereo with front and rear speakers

90. LED lighting package for interior and exterior

91. Rear vandal lock with starter interrupt switch

92. Body protecting circuit breakers

93. Exterior color: school bus yellow with white roof; bumpers, warning lamp background and rub rails to be painted black

94. First Aid Kit

95. Fire Extinguisher—dry chemical type

96. Warning devices

97. Reflectors—front, left side, right side, rear

98. Fuel sender inspection plate (not required for Electric Engine)

99. Decals and/or lettering may include, but not be limited to: window stop, alternative fuel, report erratic driving, vehicle length, emergency exit, capacity, and all other required decals

100. New Illinois Inspection sticker

101. All required lettering and bus numbers. Bus To Be Delivered with New Illinois Inspection Sticker and All Required School Bus Lettering and Bus Numbers.

Options may include, but not be limited to:

Stop signal arm panels may be added at ordering entity’s request on the left side of the bus and operate in conjunction with the required panel, if available Tow hooks Cruise control Driver clipboard holder mounted stand Removable seat cushions In-dash OEM heater system Two (2) electric fans for front windows Heated mirrors Heated fuel and water separator, if available Roll out battery tray Air suspension Buses to be safety belt ready with belts supplied but not installed Light test check system Vandal locks all around bus on all doors Heavy duty crossing arm with wind deflectors installed No child left behind system—child check system Emergency roof hatch GPS installed on each bus Three (3) camera system installed on each bus with docking station and software, hook-up signals and speed readings Rear emergency door with upper and lower glass, one piece glass door Tilt or telescoping steering wheel column Engine block heater (not required on Electric engine)

Additional Option may include, but not be limited to:

· Removable or non-removable hinged guard table for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install Officer Seats for best fit between front partition and modesty panel/grab rail and the removable or non-removable hinged guard table (if configured to the order). Ensure no less than 8.0" from front of seat cushion to any obstruction in front.

· Firearm storage locker for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install the front Officer Seat for best fit between the front partition and modesty panel/grab rail and the guard desk/table (if configured to the order). Ensure no less than 8.0" from front of seat cushion to any obstruction in front.

· Lavatory for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install at the rear of the bus.

· Backup camera mounted in rearview mirror with two side view blind spot cameras.

· Live view surveillance camera system with windshield mounted monitor.

· Floor Drain for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements.

· Isolation Cell for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements.

· 6,000-pound impact locks on all doors.

· Covered security window/viewport.

· No access to any lock, handle, or opening/closing device from inside the unit.

· All controls accessed from the control switch in the diver area in a lockable console.

· Custom fabricated, powder coated steel screening and partitions.

· Rugged minimum 10-gauge powder coated steel bulkheads with spit guards.

· Steel interior doors with integrated door stops Illinois Administrative Code for Type I School Buses https://www.ilga.gov/commission/jcar/admincode/092/09200440sections.html Illinois Administrative Code for Type II School Buses (title 92, Chapter I, Subchapter e, Part 442) https://www.ilga.gov/commission/jcar/admincode/092/09200442sections.html Illinois Administrative Code for Multifunction School Activity Buses (Title 92, Chapter I, Subchapter d, Part 435) https://www.ilga.gov/commission/jcar/admincode/092/09200435sections.html Illinois Administrative Code for Special Education Transport https://www.ilga.gov/commission/jcar/admincode/092/09200444sections.html Illinois Administrative Code for Alternate Fuel System for School Buses https://www.ilga.gov/commission/jcar/admincode/092/09200449sections.html Federal Motor Vehicle Safety Standards https://www.ecfr.gov/current/title-49/subtitle-B/chapter-V/part-571

Examples of Bulkheads, Barriers, and Cells (For visual example only) image1.jpeg image2.jpeg image3.jpeg image4.jpeg