B-27266 Exhibit G Specification for 32 Passenger People Convicted of Crimes Transport Buses 091222.docx

State of Illinois Department of Central Management Services Exhibit G

Specifications for 32 Passenger People Convicted of Crimes Transport Bus

The following specifications describe the minimum requirements for a transport bus. The vehicle shall be new, of current design and manufacture and a production model. Any additions, deletions or variations from these specifications must be noted for review/approval by the State or the vehicle may be rejected at delivery. Any standard items appearing in the manufacturer’s regular published specifications shall be included unless otherwise optioned.

Parts and service for the transport bus should be readily available in the State of Illinois.

Unless otherwise specified, the proposed equipment shall be complete in all parts and options ready for immediate use upon delivery.

Make:

Model:

Manufacturer:

The State reserves the right to waive minor informalities, deficiencies, or technical variance which by their nature are restrictive to a given manufacturer, if in its judgement, it would be in the best interest of the State. Transport buses must conform to the Federal Motor Vehicle Safety Standards and the Illinois requirements.

Specifications:

1. All standard equipment, no deletions

2. Wheelbase: 177 inches minimum

3. Gross Vehicle Weight Rating of 14,200 pounds minimum

4. Front axle: 4,600 pounds minimum

5. Rear axle: 9,500 pounds minimum

6. Front springs: 4,600 pounds minimum

7. Rear springs: 9,500 pound minimum

8. Battery: dual 600 CCA (minimum 1,200 CCA)

9. Engine 6.0-liter gasoline/diesel minimum, Hybrid, or Electric Engine

10. Engine oil cooler (not required on Electric engine)

11. Heavy duty radiator (not required on Electric engine)

12. Automatic transmission with overdrive

13. Driveshaft guards

14. Front and rear shock absorbers

15. Front and rear stabilizer bar

16. 4-wheel disc brakes with anti-lock system

17. 220 AMP alternator minimum (not required on Electric engine)

18. Dual rear wheels

19. Tires: LT225/75R16 all season radials

20. 33-gallon fuel tank (approximate—not required for Electric Engine)

21. Power steering

22. Intermittent windshield wipers with electric washers

23. In-dash heater and defroster

24. Temperature, oil pressure and coolant gauges

25. Voltmeter

26. Driver’s high back seat with lap and shoulder harness

27. Driver’s sun visor

28. Driver’s storage console with 12V power point

29. Driver’s side air bag

30. Driver’s cup holder

31. Driver’s seat air suspension with arms

32. OEM in-dash air conditioning

33. Tinted windshield and driver’s door glass

34. Aluminum or galvanized steel body construction

35. 1 ½ inch fiberglass or equal insulation in roof, side, and rear quarter panels

36. Bus body to be completely undercoated

37. 73-inch minimum interior headroom

38. Aluminized interior side panels below the windows

39. One-piece rub rails with weep holes to prevent condensation

40. Double out, panic free, manual control entrance door

41. Wrap-around anti-ride rear bumper

42. Rear fender extensions

43. Front and rear mudflaps

44. Snow rail at lower skirt

45. Roof mounted strobe light

46. Front crossing gate control with one-time interrupt switch; shall meet FMVSS and Illinois minimum requirements for school buses

47. Electric stop arm with flashing lights

48. Armored side turn signal lights—yellow side turn lamps

49. Rear turn signals—yellow turn lamps

50. Stop signals—red stop lamps

51. Minimum 7-inch x 10-inch flat with 7-inch x 4-inch convex rearview mirrors

52. Fender mounted cross-view mirrors

53. Two-step stepwell with light

54. Stainless steel grab handle at entrance steps

55. Minimum 4-inch header bumper pads over entrance and emergency doors

56. Minimum ½ inch minimum exterior grade plywood subfloor

57. Minimum 1/8-inch minimum rubber floor covering

58. Minimum 3/16-inch minimum rubber in aisle and on entrance steps

59. High back passenger seats and barriers

60. Seat belts in all passenger seats

61. Aisle molding in floor

62. Static roof vent

63. Standard manufacturer’s interior paint

64. Reflective striping around all emergency exits

65. Split sash side windows with 12-inch clear opening, minimally

66. Window stop decals

67. Tinted side and rear windows

68. Tinted rear ¼ glass

69. Curb side safety window

70. Circuit control board for all body circuits mounted in an accessible location

71. Body circuit relay disconnect

72. Accessory switch panel located to the right of the driver for easy access

73. Overhead driver’s storage compartment with swinging door

74. Minimum four (4) dome lights for passengers

75. Driver’s dome light on separate switch

76. ½ inch emergency door warning light and buzzer for driver

77. Back up alarm

78. Eight lamp warning system

79. Noise suppression switch

80. Rear air conditioning, minimum 55,000 BTU tie-in system with side mounted condenser, may be dealer installed

81. Rear heater of 50,000 BTU minimum

82. Heater shut-off valves

83. Heater bleed valves

84. Minimum 6-inch x 16-inch interior mirror

85. Certificate holder

86. AM/FM stereo with front and rear speakers

87. LED lighting package for interior and exterior

88. Rear vandal lock with starter interrupt switch

89. Body protecting circuit breakers

90. Exterior color: school bus yellow with white roof; bumpers, warning lamp background and rub rails to be painted black

91. First Aid Kit

92. Fire Extinguisher—dry chemical type

93. Warning devices

94. Reflectors—front, left side, right side, rear

95. Fuel sender inspection plate (not required for Electric Engine)

96. Decals and/or lettering may include, but not be limited to: window stop, alternative fuel, report erratic driving, vehicle length, emergency exit, capacity, and all other required decals

97. New Illinois Inspection sticker

98. All required lettering and bus numbers. Bus To Be Delivered with New Illinois Inspection Sticker and All Required School Bus Lettering and Bus Numbers.

Options may include, but not be limited to:

Stop signal arm panels may be added at ordering entity’s request on the left side of the bus and operate in conjunction with the required panel, if available Tow hooks Cruise control Driver clipboard holder mounted stand Removable seat cushions In-dash OEM heater system Two (2) electric fans for front windows Heated mirrors Heated fuel and water separator, if available Roll out battery tray Air suspension Buses to be safety belt ready with belts supplied but not installed Light test check system Vandal locks all around bus on all doors Heavy duty crossing arm with wind deflectors installed No child left behind system—child check system Emergency roof hatch GPS installed on each bus Three (3) camera system installed on each bus with docking station and software, hook-up signals and speed readings Rear emergency door with upper and lower glass, one piece glass door Tilt or telescoping steering wheel column Engine block heater (not required on Electric engine)

Additi0onal Option may include, but not be limited to:

· Removable or non-removable hinged guard table for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install Officer Seats for best fit between front partition and modesty panel/grab rail and the removable or non-removable hinged guard table (if configured to the order). Ensure no less than 8.0" from front of seat cushion to any obstruction in front.

· Firearm storage locker for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install the front Officer Seat for best fit between the front partition and modesty panel/grab rail and the guard desk/table (if configured to the order). Ensure no less than 8.0" from front of seat cushion to any obstruction in front.

· Lavatory for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements. Install at the rear of the bus.

· Backup camera mounted in rearview mirror with two side view blind spot cameras.

· Live view surveillance camera system with windshield mounted monitor.

· Floor Drain for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements.

· Isolation Cell. for People Convicted of Crimes Transport. All standard equipment, no deletions. Must conform to the Federal Motor Vehicle Safety Standards, welding standards, electrical standards, and the Illinois requirements.

· 6,000-pound impact locks on all doors.

· Covered security window/viewport.

· No access to any lock, handle, or opening/closing device from inside the unit.

· All controls accessed from the control switch in the diver area in a lockable console.

· Custom fabricated, powder coated steel screening and partitions.

· Rugged minimum 10-gauge powder coated steel bulkheads with spit guards.

· Steel interior doors with integrated door stops Illinois Administrative Code for Type I School Buses https://www.ilga.gov/commission/jcar/admincode/092/09200440sections.html Illinois Administrative Code for Type II School Buses (title 92, Chapter I, Subchapter e, Part 442) https://www.ilga.gov/commission/jcar/admincode/092/09200442sections.html Illinois Administrative Code for Multifunction School Activity Buses (Title 92, Chapter I, Subchapter d, Part 435) https://www.ilga.gov/commission/jcar/admincode/092/09200435sections.html Illinois Administrative Code for Special Education Transport https://www.ilga.gov/commission/jcar/admincode/092/09200444sections.html Illinois Administrative Code for Alternate Fuel System for School Buses https://www.ilga.gov/commission/jcar/admincode/092/09200449sections.html Federal Motor Vehicle Safety Standards https://www.ecfr.gov/current/title-49/subtitle-B/chapter-V/part-571 image1.jpeg image2.jpeg image3.jpeg image4.jpeg