Attachment J-1 T-ARC(X) System Spec Version 1.0 20200611 rev1.pdf

T-ARC(X) SYSTEM SPECIFICATION VERSION 1.0 (11 JUNE 2020)

T-ARC (X) NAVY CABLE SHIP

System Specification Attachment J-1

Version 1.0 11 June 2020

Solicitation No. N00024-20-R-2211

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and DOD Contractors only (Critical Technology, 11 Jun 2020). Other requests for this document shall be referred to PEO Ships (PMS325).

ii DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and DOD Contractors only (Critical Technology, 11 Jun 2020). Other requests for this document shall be referred to PEO Ships (PMS325).

T-ARC(X) NAVY CABLE SHIP

SYSTEM SPECIFICATION

TECHNICAL AUTHORITY APPROVAL:

___________________________ Date: ____________

J. CAREY FILLING

Chief Systems Engineer (Ships)

SEA 05D

PROGRAMMATIC AUTHORITY APPROVAL:

____________________________ Date: _____________ Mr. Michael P. Kosar Program Manager Support Ships, Boats and Craft

PMS325

12 June 2020 iii

DISTRIBUTION STATEMENT D: Distribution authorized to the Department of Defense and DOD Contractors only (Critical Technology, 11 Jun 2020). Other requests for this document shall be referred to PEO Ships (PMS325).

T-ARC(X) SYSTEM SPECIFICATION

TABLE OF CONTENTS

1 SCOPE

1.1 INTRODUCTION

2 APPLICABLE DOCUMENTS

2.1 GENERAL

2.2 GOVERNMENT DOCUMENTS

2.2.1 SPECIFICATIONS, STANDARDS, AND HANDBOOKS

2.2.2 OTHER GOVERNMENT DOCUMENTS

2.3 NON-GOVERNMENT DOCUMENTS

2.4 ORDER OF PRECEDENCE

3 REQUIREMENTS

3.070 GENERAL REQUIREMENTS FOR DESIGN AND CONSTRUCTION

3.070.1 SERVICE LIFE

3.070.2 CLASSIFICATION, CERTIFICATION, AND REGULATORY

REQUIREMENTS

3.070.3 SHIP CHARACTERISTICS

3.070.4 OPERATING PROFILE AND CONCEPT OF OPERATIONS

3.070.5 ENVIRONMENTAL CONDITIONS

3.070.5.1 TEMPERATURES AND HUMIDITY

3.070.5.2 WIND, SNOW, ICE, AND GREENWATER LOADS

3.070.6 MANEUVERABILITY

3.070.7 MASS PROPERTIES AND STABILITY LIMITS

3.070.8 LOADS AND ENDURANCE STORES

3.070.9 LOADING CONDITIONS AND LIMITS

3.070.10 SPACE AND WEIGHT RESERVATIONS

3.070.11 CYBERSECURITY

3.070.12 ICE STRENGTHENING

3.070.13 SHORE CONNECTIONS

3.070.14 MISSION VANS AND INTERFACES

3.071 ACCESS

3.071.1 GENERAL

3.071.2 VESTIBULES

3.071.3 SPARES AND STORES HANDLING

3.071.4 EQUIPMENT AND MACHINERY

3.071.5 HATCHES AND SCUTTLES

3.073 NOISE AND VIBRATION

3.073.1 AIRBORNE NOISE

iv

3.073.2 SONAR SELF-NOISE

3.073.3 BUBBLE SWEEPDOWN

3.073.4 VIBRATION

3.076 RELIABILITY, AVAILABILITY, AND MAINTAINABILITY

3.077 ENVIRONMENT, SAFETY, AND OCCUPATIONAL HEALTH

3.078 MATERIALS

3.079 GENERAL SEAKEEPING

3.080 LOGISTICS AND READINESS

3.080.1 LOGISTICS SUPPORT REQUIREMENT

3.080.2 SUPPLY SUPPORT

3.080.3 MAINTENANCE

3.080.4 OUTFITTING/FITTING OUT

3.080.5 STANDARDIZATION

3.080.6 COMPUTER RESOURCES

3.080.7 FACILITIES

3.088 HUMAN FACTORS ENGINEERING

3.100 REQUIREMENTS FOR HULL STRUCTURE

3.100.1 LOADS NOT ADDRESSED BY ABS

3.100.2 HULL STRUCTURE

3.100.3 STRESS RISERS

3.100.4 CORROSION

3.100.5 TANKS

3.100.6 DOCKING PLUGS

3.100.7 COAMINGS

3.130 HULL DECKS

3.170 MASTS

3.180 FOUNDATIONS

3.184 NAVIGATION SYSTEM AND MISSION ELECTRONIC SYSTEM (MES)

ALIGNMENT

3.184.1 DEFINITION AND REALIZATION OF REFERENCE FRAME

3.184.2 MASTER REFERENCE BLOCK AND REFERENCE FRAME

3.184.3 INSTALLATION ALIGNMENT

3.184.4 MEASUREMENT OF COMPONENT POSITION AND ROTATION

3.200 GENERAL REQUIREMENTS FOR MACHINERY PLANT

3.202 CONTROL AND MONITORING SYSTEMS

3.202.1 MACHINERY CENTRALIZED CONTROL SYSTEM

3.202.2 POWER MANAGEMENT SYSTEM (PMS)

3.202.3 SHORE POWER MONITORING CAPABILITY

3.233 DIESEL ENGINES

v

3.235 ELECTRIC PROPULSION

3.236 MAIN PROPULSION THRUSTERS AND PODDED PROPULSOR SYSTEMS

3.241 REDUCTION GEARS

3.243 PROPULSION SHAFTING

3.245 PROPELLERS

3.256 SEAWATER COOLING SYSTEM

3.258 COMBUSTION AIR AND EXHAUST SYSTEMS

3.258.1 GENERAL

3.258.2 COMBUSTION AIR SYSTEMS

3.258.3 COMBUSTION EXHAUST SYSTEMS

3.260 LUBE OIL

3.260.1 GENERAL

3.260.2 TANKS

3.260.3 LUBE OIL FILL AND TRANSFER SYSTEM

3.260.4 LUBE OIL PURIFICATION SYSTEM

3.260.5 LUBE OIL SERVICE SYSTEM

3.300 GENERAL REQUIREMENTS FOR ELECTRICAL SYSTEMS

3.300.1 GENERAL

3.300.2 ELECTRIC POWER

3.300.2.1 CLEAN POWER

3.300.3 ELECTRICAL SYSTEMS

3.300.4 SHORE POWER

3.302 MOTORS AND ASSOCIATED EQUIPMENT

3.302.1 MOTORS

3.302.2 CONTROLLERS

3.302.3 GROUP CONTROL CENTERS

3.303 PROTECTIVE DEVICES

3.304 CABLE

3.304.1 GENERAL

3.304.2 CABLE ROUTING AND PENETRATION

3.304.3 CABLE SEPARATION

3.304.4 CABLE CONDUIT

3.310 ELECTRIC POWER GENERATION

3.313 SHIP’S BATTERIES AND CHARGING EQUIPMENT

3.314 CONVERSION DEVICES

3.320 POWER DISTRIBUTION SYSTEMS

3.320.1 RECEPTACLES

3.320.2 EQUIPMENT LOCATED IN THE WEATHER

3.320.3 EMERGENCY POWER DISTRIBUTION

vi

3.324 SWITCHBOARDS AND PANELS

3.330 LIGHTING SYSTEMS

3.330.1 GENERAL

3.330.2 INTERIOR LIGHTING

3.330.3 EXTERIOR LIGHTING

3.330.4 WATERLINE/HULL SECURITY LIGHTING

3.330.5 EMERGENCY LIGHTING

3.400 GENERAL REQUIREMENTS FOR COMMAND AND SURVEILLANCE

SYSTEMS

3.402 SECURITY REQUIREMENTS

3.405 ANTENNA SYSTEMS

3.405.1 SHIP ANTENNA SYSTEMS

3.405.2 NAVAL COMMUNICATIONS ANTENNA SYSTEMS

3.406 BONDING AND GROUNDING

3.407 ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3)

3.420 DYNAMIC POSITIONING SYSTEM AND INDEPENDENT AUTOPILOT

3.420.1 DYNAMIC POSITIONING SYSTEM

3.420.2 DPS AUTOMATIC CONTROL MODE

3.420.3 INDEPENDENT AUTOPILOT

3.421 NON-ELECTRICAL NAVIGATION AIDS

3.421.1 MAGNETIC COMPASS

3.421.2 PELORUS STANDS

3.421.3 BAROMETER

3.421.4 BINOCULARS

3.422 ELECTRICAL NAVIGATION AIDS & NAVIGATION LIGHTS

3.426 NAVIGATION SYSTEMS

3.426.1 GENERAL

3.426.2 ELECTRONIC CHART DISPLAY AND INFORMATION SYSTEM

3.426.3 SURFACE SEARCH RADAR

3.426.4 AUTOMATIC IDENTIFICATION SYSTEM

3.426.5 SPEED LOG

3.426.6 GYROCOMPASSES

3.426.7 DEPTH SOUNDER

3.431 INTERIOR COMMUNICATIONS SYSTEMS

3.431.1 WIRELESS COMMUNICATIONS SYSTEMS

3.431.2 SOUND POWERED TELEPHONE SYSTEM

3.431.3 MISSION COMMUNICATIONS SYSTEM

3.431.4 PBX TELEPHONE SYSTEM

3.431.5 ANNOUNCING SYSTEMS

vii

3.431.5.1 GENERAL ANNOUNCING CIRCUIT

3.431.5.2 INTERSHIP ANNOUNCING (LOUD HAILER CIRCUIT) (6MC)

3.431.5.3 BRIDGE ANNOUNCING CIRCUIT (18MC)

3.432 SHIPWIDE LOCAL AREA NETWORKS

3.434 ENTERTAINMENT AND TRAINING SYSTEM

3.436 ALARMS AND INDICATORS

3.436.1 GENERAL

3.436.2 CHEMICAL, BIOLOGICAL, RADIOLOGICAL (CBR) DETECTION

3.436.3 FIRE AND SMOKE DETECTION SYSTEMS

3.436.4 FLOODING ALARMS

3.436.5 WATERTIGHT DOOR INDICATOR SYSTEM

3.436.6 EXTERNAL INTRUSION DETECTION SECURITY SYSTEM

3.436.7 INTERNAL INTRUSION DETECTION SECURITY SYSTEM

3.436.8 GENERAL EMERGENCY ALARM SYSTEM

3.436.9 MEDICAL FACILITY ALARMS

3.436.10 REGRIGERATED SPACE LOCKED-IN ALARM

3.436.11 STEERING CASUALTY ALARM

3.436.12 TANK LEVEL INDICATORS (TLIs)

3.436.13 PROPULSION SHAFT REVOLUTION COUNTERS

3.439 CCTV SYSTEM

3.440 EXTERIOR COMMUNICATIONS SYSTEMS

3.440.1 GENERAL

3.440.2 SHIP COMMUNICATIONS EQUIPMENT

3.440.3 NAVAL COMMUNICATIONS EQUIPMENT

3.443 SHIP’S WHISTLE

3.455 IDENTIFICATION SYSTEMS

3.461 MISSION SONAR SYSTEMS (MSS)

3.461.1 MSS REMOTE DISPLAY CONSOLE

3.461.2 SONAR SYNCHRONIZATION UNIT

3.461.3 MULTIBEAM SURVEY SYSTEM – DEEP WATER

3.461.4 SUB BOTTOM PROFILER

3.461.5 ACOUSTIC NAVIGATION AND TRACKING SYSTEM

3.461.6 SINGLEBEAM SURVEY SYSTEM

3.461.7 ACOUSTIC DOPPLER CURRENT PROFILER

3.461.8 SURFACE SOUND VELOCIMETER SYSTEM

3.461.9 EXPENDABLE SOUND VELOCITY PROFILER (XSVP)

3.461.10 ACOUSTIC MONITORING SYSTEM

3.461.11 ATTITUDE, HEADING & REFERENCE SYSTEM/INERTIAL

REFERENCE SYSTEM

3.500 GENERAL REQUIREMENTS FOR AUXILIARY SYSTEMS

viii

3.503 PUMPS

3.504 INSTRUMENTS AND INSTRUMENT BOARDS

3.504.1 GENERAL

3.504.2 PRESSURE GAUGES

3.504.3 THERMOMETERS

3.504.4 CLOCKS

3.505 REQUIREMENTS FOR PIPING SYSTEMS

3.505.1 GENERAL

3.505.2 MATERIALS

3.505.3 FLOW VELOCITY

3.505.4 SEACHESTS

3.506 OVERFLOWS, AIR ESCAPES, AND SOUNDING ARRANGEMENTS

3.507 MACHINERY AND PIPING DESIGNATION AND MARKING

3.508 THERMAL INSULATION FOR MACHINERY, EQUIPMENT, AND PIPING

3.509 THERMAL INSULATION AND ACOUSTIC ABSORPTIVE TREATMENT FOR

DUCTING AND TRUNKS

3.512 HEATING, VENTILATION, AND AIR CONDITIONING

3.512.1 GENERAL

3.512.2 AIR CONDITIONING (A/C) SYSTEMS

3.512.3 MACHINERY SPACE VENTILATION

3.514 AIR CONDITIONING MACHINERY

3.516 REFRIGERATION

3.516.1 GENERAL

3.516.2 SHIPS SERVICE REFRIGERATION SYSTEM DESIGN

3.516.3 REFRIGERATED STORAGE COMPARTMENTS

3.521 FIREMAIN SYSTEM

3.523 COUNTERMEASURES WASHDOWN

3.528 MAIN AND SECONDARY DRAINAGE SYSTEMS

3.528.1 GENERAL

3.528.2 DECK DRAINS

3.528.3 PLUMBING DRAINS

3.528.4 CLEANOUTS

3.528.5 PLUMBING VENTS

3.529 BILGE AND BALLAST SYSTEM

3.529.1 GENERAL

3.529.2 DEWATERING BILGE SYSTEM

3.529.3 BALLASTING/DEBALLASTING

3.531 FRESHWATER PRODUCTION AND SERVICE

3.532 FRESH WATER SERVICE SYSTEMS

ix

3.532.1 CHILLED WATER SYSTEM

3.532.2 FRESHWATER COOLING SYSTEMS

3.532.2.1 LOW TEMPERATURE FRESHWATER COOLING SYSTEM(S)

3.532.2.2 HIGH TEMPERATURE FRESHWATER COOLING SYSTEM(S)

3.532.3 COOLANT WATER DRAINS

3.533 POTABLE WATER SYSTEMS

3.533.1 GENERAL

3.533.2 BROMINATION SYSTEM

3.533.3 SHIP’S POTABLE WATER

3.541 SHIP’S FUEL SYSTEMS

3.541.1 GENERAL

3.541.2 TANKS

3.541.3 FUEL FILL AND TRANSFER SYSTEM

3.541.4 FUEL PURIFICATION SYSTEMS

3.541.5 FUEL SERVICE SYSTEMS

3.541.6 WORKBOAT AND RESCUE BOAT REFUELING STATIONS

3.541.7 TANK VENTING AND OVERPRESSURIZATION PROTECTION

3.541.8 FUEL STRIPPING SYSTEM

3.551 COMPRESSED AIR SYSTEMS

3.551.1 GENERAL

3.551.2 STARTING AIR

3.551.3 LOW PRESSURE AIR

3.551.4 BREATHING AIR COMPRESSOR SYSTEM

3.555 FIREFIGHTING SYSTEMS

3.555.1 FIXED FLOODING SYSTEMS

3.555.2 MACHINERY SPACE FIREFIGHTING

3.555.3 GALLEY FIRE SUPPRESSION

3.555.4 FIRE EXTINGUISHERS

3.555.5 SMALL ARMS MAGAZINE SPRINKLING SYSTEM

3.555.6 LITHIUM BATTERY ROOM SPRINKLING

3.556 HYDRAULIC SYSTEMS

3.562 STEERING SYSTEMS

3.565 ROLL STABILIZATION

3.568 AUXILIARY THRUSTER(S)

3.573 HANDLING GEAR

3.573.1 GENERAL

3.573.2 CRANES

3.573.3 MAIN CRANE(S)

3.573.4 STORES CRANE(S)

3.573.5 OVERHEAD LIFTING DEVICES

x

3.573.5.1 MISSION OVERHEAD LIFTING DEVICES

3.581 ANCHORING SYSTEMS

3.582 MOORING AND TOWING SYSTEMS

3.582.1 FENDERS

3.583 FAST RESCUE BOAT, LIFEBOATS, AND WORKBOAT

3.588 AIRCRAFT INTERFACE

3.589 ELEVATORS AND DUMBWAITERS

3.593 ENVIRONMENTAL POLLUTION CONTROL SYSTEMS

3.593.1 SEWAGE AND GRAY WATER SYSTEMS

3.593.2 OIL POLLUTION SYSTEMS

3.593.3 SOLID WASTE HANDLING SYSTEMS

3.593.4 FOOD WASTE

3.593.5 MEDICAL WASTE

3.595 CABLE MISSION SYSTEMS

3.595.1 CABLE HIGHWAY

3.595.2 CABLE TANKS LAYOUT & DESIGN

3.595.3 REPEATER STORAGE AND HANDLING

3.595.4 MISSION SPACES AND ROOMS

3.595.5 CABLE HANDLING EQUIPMENT

3.595.6 SEA PLOW

3.595.7 REMOTELY OPERATED VEHICLE

3.595.8 CABLE GEAR

3.595.9 MOONPOOL

3.600 GENERAL REQUIREMENTS FOR OUTFIT AND FURNISHINGS

3.602 DESIGNATING AND MARKING

3.602.1 LABELS, MARKINGS, AND PLACARDS

3.604 LOCKS AND KEYS

3.604.1 DOOR LOCKS

3.604.2 KEYS

3.612 RAILS, STANCHIONS, LIFELINES, AND SAFETY NETS

3.613 FLAG HOISTS

3.621 JOINER WORK

3.621.1 GENERAL

3.621.2 JOINER BULKHEADS

3.621.3 JOINER LINERS

3.621.4 JOINER CEILINGS

3.623 LADDERS AND STAIRS

3.623.1 GENERAL

3.623.2 ACCOMMODATION LADDERS

xi

3.624 ACCESS CLOSURES

3.624.1 INTERIOR DOORS

3.624.2 EXTERIOR DOORS

3.624.3 HATCHES AND SCUTTLES

3.625 WINDOWS AND PORTLIGHTS

3.631 CORROSION PREVENTION AND CONTROL

3.631.1 LIMITATIONS

3.631.2 SURFACE PREPARATION

3.631.3 STRIPE COATING

3.631.4 ENGINE EXHAUST TREATMENT SYSTEM REDUCING AGENT

SERVICE AND STORAGE TANKS

3.633 CATHODIC PROTECTION

3.634 DECK COVERING

3.635 COMPARTMENT TREATMENTS

3.635.1 GENERAL

3.635.2 INSULATION, THERMAL

3.635.3 INSULATION, ACOUSTIC

3.635.4 VAPOR BARRIERS

3.637 SHEATHING

3.640 LIVING SPACES

3.641 STATEROOMS

3.641.1 LOCATION AND SIZE

3.641.2 ARRANGEMENTS AND CLEARANCES

3.641.3 FURNISHINGS AND MATERIALS

3.644 SANITARY SPACES AND FIXTURES

3.644.1 STATEROOM SANITARY SPACES

3.644.2 DECK HEADS

3.644.3 CLEANING GEAR LOCKERS

3.644.4 EMERGENCY WASH FACILITIES

3.644.5 ENGINEER’S CHANGE ROOM

3.645 LEISURE SPACES

3.651 FOOD SERVICE SPACES

3.651.1 EQUIPMENT AND INSTALLATION

3.651.2 GALLEY

3.651.3 SCULLERY

3.651.4 MESSROOMS

3.652 MEDICAL FACILITIES

3.652.1 DISTRIBUTED MEDICAL SUPPORT EQUIPMENT

3.654 SHIP STORE

xii

3.655 LAUNDRY SPACES

3.661 ADMINISTRATIVE SPACES

3.661.1 LOCATIONS

3.661.3 FURNISHINGS AND MATERIALS

3.662 CONTROL SPACES

3.662.1 PILOT HOUSE

3.662.1.1 GENERAL

3.662.1.2 CONSOLES, CONTROL, AND DISPLAYS

3.662.1.3 PILOT HOUSE FURNISHINGS

3.662.2 ENGINEER’S OPERATING STATION

3.662.3 QUARTERDECK STATIONS

3.663 NAVAL COMMUNICATIONS CENTER

3.664 DAMAGE CONTROL SPACES

3.664.1 DAMAGE CONTROL CENTRAL

3.664.2 DAMAGE CONTROL LOCKERS AND SECONDARY DAMAGE

CONTROL CENTRAL

3.664.3 BREATHING AIR COMPRESSOR ROOM

3.665 WORKSHOPS, LABORATORIES, AND MAINTENANCE AREAS

3.665.1 MACHINE SHOP

3.665.2 DIESEL REPAIR SHOP

3.665.3 ELECTRICAL WORKSHOP

3.665.4 MACHINERY SPACE FUEL OIL, LUBE OIL, AND WATER SAMPLING

TEST LABORATORY

3.665.5 ELECTRONICS TEST SHOP

3.665.6 AUXILIARY MACHINERY ROOM WORKSHOP

3.665.7 BOSUN WORKSHOP

3.670 STOWAGE SPACES

3.671 LOCKERS AND SPECIAL STOWAGE

3.671.1 WATERLINE SECURITY LIGHTING SYSTEM STOWAGE

3.671.2 POTABLE WATER TREATMENT STORAGE LOCKER

3.671.3 POTABLE WATER HOSE STOWAGE

3.671.4 GAS FREE PORTABLE SENSOR STOWAGE

3.671.5 MOORING LINE STOWAGE

3.671.6 SEWAGE TREATMENT CHEMICAL STOWAGE

3.671.7 SEWAGE SPILL RESPONSE LOCKER

3.671.8 GUARDLINE STOWAGE

3.671.9 PYROTECHNIC LOCKER

3.671.10 FLAG STOWAGE

3.671.11 SHORING STOWAGE

3.671.12 COMPRESSED GAS CYLINDER STOWAGE

xiii

3.671.13 ACCOMMODATION LADDER EQUIPMENT LOCKER

3.672 STOREROOMS

3.672.1 GENERAL STORES STOREROOM

3.672.2 SHIP SPARE PARTS STOREROOM

3.672.3 ENGINEER STOREROOM(S)

3.672.4 ELECTRICAL STOREROOM

3.672.5 SHORE POWER CABLE STOREROOM

3.672.6 BOSUN STOREROOM

3.672.7 BOAT GEAR LOCKER

3.672.8 FOUL WEATHER GEAR LOCKERS

3.672.9 PAINT LOCKER

3.672.10 BAGGAGE STOREROOM

3.672.11 MORALE, WELFARE, AND RECREATION STOREROOM

3.672.12 FOOD SERVICE PROVISION STOREROOM

3.672.13 MEDICAL STORES LOCKER

3.672.14 SHIP’S STORE STOREROOM

3.672.15 LINEN LOCKERS

3.672.16 CHEMICAL, BIOLOGICAL, AND RADIOLOGICAL DEFENSE

EQUIPMENT STOREROOM

3.672.17 FLAMMABLE LIQUIDS STOREROOM

3.672.18 NON-FLAMMABLE HAZARDOUS MATERIALS STOREROOM

3.672.19 USED HAZARDOUS MATERIALS STOREROOM

3.700 GENERAL REQUIREMENTS FOR ARMAMENT SYSTEMS

3.711 ANTITERRORISM/FORCE PROTECTION (AT/FP) WEAPONS MOUNTS AND

READY SERVICE LOCKERS

3.763 AT/FP SMALL ARMS MAGAZINE

3.764 SHIP’S ARMORY

4 VERIFICATION

LIST OF TABLES

Table 1: [3.070.3-1] Number of Personnel Table 2: [3.070.4-1] Notional Annual Operating Profile Table 3: [3.070.5.1-1] Environmental Conditions – Temperatures and Humidity Table 4: [3.070.8-1] Non-Payload Variable Loads Table 5: [3.070.8-2] Provisions/Store Endurance Table 6: [3.070.8-3] Tank Loads Table 7: [3.070.9-1] Loading Conditions Table 8: [3.073.2-1] Sonar Self Noise Level Requirements Table 9: [3.079-1] Seakeeping Criteria Table 10: [3.070-2] Sea State Properties Table Table 11: [3.184.2-1] Survey Specifications xiv

Table 12: [3.258-1] Exhaust Reagent Operating Profile Table 13: [3.300.2.1-1] 480 VAC Clean Power System Requirements Table 14: [3.300.2.1-2] 208 VAC/120 VAC Clean Power System Requirements Table 15: [3.505-1] Valve types by use and size Table 16: [3.516-1] Refrigeration system design conditions Table 17: [3.593.3-1] Solid Waste Generation Rates Table 18: [3.631.2-1] Surface Preparation Standards (per SSPC) Table 19: [3.633-1]: Requirements for Impressed Current Cathodic Protection Anodes Table 20: [3.641-1] Number and Size of Staterooms

LIST OF FIGURES

Figure 1: [3.595.9.1-1] Concept Sketch of Moonpool Door Openings xv

LIST OF APPENDICES

APPENDIX A ACRONYM LIST ......................................................................................... A-1 APPENDIX B MOBILITY PERFORMANCE CALCULATIONS ..................................... B-1 APPENDIX C CONCEPT OF OPERATIONS .................................................................... C-1 APPENDIX D DAMAGE STABILITY CRITERIA ............................................................ D-1

APPENDIX E MILITARY SEALIFT COMMAND MAINTENANCE PHILOSOPHY .... E-1

APPENDIX F DIESEL ENGINE APPROVAL TEST ......................................................... F-1 APPENDIX G PIPING SYSTEM REQUIREMENTS ......................................................... G-1

APPENDIX H MSC PAINT APPROVAL PROCEDURES AND PRESERVATION

INSTRUCTIONS .......................................................................................... H-1 APPENDIX I DECK COVERINGS ...................................................................................... I-1

1 SCOPE

1.1 INTRODUCTION

This System Specification provides the initial draft requirements for concept baseline definition for T-ARC(X) also referred to as “the ship.” System Specification updates will be developed and issued as revisions to support further design maturation during the execution of the industry studies contracts based in part on participating contractor recommendations. The System Specification will be updated and incorporated in the Detail Design and Construction (DD&C) Request for Proposals (RFP).

2 APPLICABLE DOCUMENTS

2.1 GENERAL

The documents listed in this section are referenced in this specification, including the appendices. While every effort has been made to ensure the completeness of this list, document users are cautioned that they shall meet all specified requirements documents cited in this specification, whether or not they are listed in this section. Documents, drawings, and publications form a part of this document to the extent specified herein. Where the referenced documents use terms similar to “recommendation”, “guideline”, or “guidance” in its title or text, features indicated by the use of such terms shall be mandatory.

2.2 GOVERNMENT DOCUMENTS

Effective issue: The issue or revision of the documents, drawings and publications specified herein shall apply.

2.2.1 SPECIFICATIONS, STANDARDS, AND HANDBOOKS

2.2.1.1 DEPARTMENT OF DEFENSE (DoD)

Specifications

MIL-DTL-16884 Fuel, Naval Distillate MIL-S-901 Shock Tests. H.I. (High-Impact) Shipboard Machinery, Equipment, And Systems, Requirements For

Standards

DoD-STD-1399 (Navy) Interface Standard for Shipboard Systems, Ship Motion and Attitude

MIL-STD-461 Interface Standard, Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment

MIL-STD-882 Standard Practice, System Safety

MIL-STD-1310 (Navy) Standard Practice, Shipboard Bonding, Grounding, and Other Techniques for Electromagnetic Compatibility, Electromagnetic Pulse (EMP) Mitigation, and Safety

Handbooks

DoD-HDBK-289 (SH) Lighting On Naval Ships

2.2.2 OTHER GOVERNMENT DOCUMENTS

2.2.2.1 DEPARTMENT OF DEFENSE

Instructions and Directives

DoD Instruction 8100.04 DoD Unified Capabilities (UC) DoD Instruction 8500.1 Information Assurance (IA) DoD Instruction 8510.01 Risk Management Framework (RMF) for DoD Information

Technology (IT) UFC 4-150-02 Dockside Utilities for Ship Service, with Change 5

National Security Telecommunications and Information Systems Security Advisory Memorandum (NSTISSAM)

TEMPEST/2-95 Red/Black Installation Guidance

2.2.2.2 DEPARTMENT OF THE NAVY

Information Assurance (IA) Publications

Module 5239-22 Information Assurance Protected Distribution System (PDS) Publication

Module 5239-31 Information Assurance Shipboard Red/Black Installation Publication

Military Sealift Command (MSC)

COMSCINST 3541.2 Shipboard Damage Control Policy for MSC Ships

COMSCINST 5530.3 Military Sealift Command (MSC) Shipboard Antiterrorism (AT) Program

MSC Drawing No. 664-8393510 Damage Control Locker Standard Arrangements

MSC Drawing No. 664-8393515 Breathing Air Compressor Room Standard Arrangements

MSC Drawing No. 802-4844759 Standard Plan for Decontamination Station MSC QMS N0720-006.00-AQ Identifying Markings

[None] Guidance for Implementing and Validating MSC ECDIS with DNC® and TOD0 Capabilities

MSC QMS N0720-110.00-P Habitability Standards for New Construction Large Ships

MSC QMS N0720-111.00-P Steward Department and Food Service Standards for New Construction Large Ships

MSC QMS N0720-112.00-P Engine Department and Shop Standards for New Construction Large Ships

MSC QMS N0720-113.00-P Deck Department and Pilot House Standards for New Construction Large Ships

MSC QMS N0720-114.00-P Medical Space Standards for New Construction Large Ships

MSC QMS N0732-221.00-AQ Emergency Escape Breathing Devices MSC QMS N0732-227.00-AQ Damage Control Markings

Naval Sea Systems Command (NAVSEA) Drawings

BUSHIPS Drawing No. 803-1400075 N.T. Door Medium Steel 26 X 66 BUSHIPS Drawing No. S3209-866181 Hull Type Drawing Log Desk Drop Leaf

Aluminum NAVSEA Drawing No. 803-921865 Cathodic Protection Hull Zinc Anodes NAVSEA Drawing No. 803-5184287 Rack, Stowage, Multi-Purpose Gas

Cylinder NAVSEA Drawing No. 803-6397261 Doors Watertight, Individually Dogged

Arrangement NAVSEA Drawing No. 804-1360106 Locker Details NAVSEA Drawing No. 804-4444649 Locker, Pistol NAVSEA Drawing No. 804-4444650 Connections Surface Ship Sewage

Discharge NAVSHIPS Drawing No. 804-860159 Storerooms, Details NAVSHIPS Drawing No. 804-2255403 Accommodation Ladder Boat Fender, Shl

Bumper, Lwr Platform Assy & Det For All Ships Except Those Operating w/Amph Craft

NAVSHIPS Drawing No. 804-4444648 Locker, Small Arms, Arrangement & Details

NAVSHIPS Drawing No. 804-4563098 Bins, Storeroom Stowage Aids NAVSHIPS Drawing No. 804-4563099 Storeroom Stowage Aids J & K Racks E

& L Counters

Instructions

NAVSEAINST 5000.8 Naval SYSCOM Risk Management Policy NAVSEAINST 5100.12 System Safety Engineering Policy NAVSEAINST 9096.6B Weight and KG Margin Policy NAVSEAINST 9405.1A Numbering Identification System for

Surface Ship Antennas

Manuals

NAVSEA S9086-KC-STM-010/CH-300 Electric Plant - General NAVSEA S9522-AA-HBK-010 Description, Operation and Maintenance

Handbook for Magazine Sprinkler Systems

Other NAVSEA documents

NAVSEA OP 4 Ammunition and Explosive Safety Afloat NAVSEA OP 3565 Electromagnetic Radiation Hazards (Hazards to Personnel, Fuel and Other Flammable Material)

[None]

Metric Guide for Naval Ship Systems Design and Acquisition

[None] NAVSEA Prohibited and Controlled Chemicals List (PCCL)

[None] NAVSEA Qualified Products List (QPL)

Office of the Chief of Naval Operations (OPNAV) NTTP 4-01.4 Underway Replenishment OPNAVINST 5090.1 Environmental Readiness Program OPNAVINST 5100.19 Navy Safety and Occupational Health (SOH)

Program Manual for Forces Afloat OPNAVINST 5530.13 Department of the Navy Physical Security

Instruction for Conventional Arms, Ammunition, and Explosives (AA&E)

Other Navy publications

CNSS Policy No. 11 Acquisition of Information Assurance (IA) and IA- Enabled Information Technology (IT) Products

GSA Commercial Item Description A-A-59470

Cabinets, Modular Drawer Storage (Naval Shipboard)

NTRP 1-03.5 Defense Readiness Reporting System - Navy Reporting Manual

SECNAV M-5510.36 Department of the Navy Information Security Program

[None] NOSSA Explosives Safety Design Validation [None] Damage Control Allowance Equipage Lists [None] DD&C Accepted Weight Estimate

2.2.2.3 OTHER GOVERNMENT AGENCIES

Centers for Disease Control and Prevention (CDC)

Vessel Sanitation Program 2018 Operations Manual

Defense Information Systems Agency (DISA)

DISA Approved Products List

Federal Communications Commission (FCC)

Regulations on Global Maritime Distress and Safety System

National Counterintelligence and Security Center (NCSC)

Technical Specifications for Construction and Management of Sensitive Compartmented and Information Facilities

United States Coast Guard (USCG)

Navigation and Vessel Inspection Circulators (NVIC) 9-81

Navigation and Vessel Inspection Circulars (NVIC) 1-89

Guidance Regarding Shipboard Helicopters

Underwater Survey Guidance

Navigation and Vessel Inspection Circulars (NVIC) 02-95 Change 3

U.S. Coast Guard's Alternate Compliance Program

United States Environmental Protection Agency (EPA)

Vessel General Permit

United States Food and Drug Administration (FDA) Certificate of Sanitary Construction

United States Government

33 CFR Navigation and Navigable Waters 46 CFR Shipping 47 CFR Telecommunication [None] Clean Air Act, 42 U.S.C.

[None] Federal Information Processing Standards

United States Public Health Service (USPHS)

Publication No. 68 Handbook of Sanitation of Vessels in Operation: Sanitation Features and Facilities on Vessels in Operation

Publication No. 393 Handbook on Sanitation of Vessel Construction: Standards of Sanitation and Ratproofing for the Construction of Vessels

2.3 NON-GOVERNMENT DOCUMENTS

Effective issue: The issue or revision of documents, drawings, and publications in effect at Detail Design and Construction Request for Proposal due date shall apply unless otherwise specified herein.

American Bureau of Shipping (ABS) (versions as required by ABS)

Classification Certificate Guidance Notes on Ship Vibration Guide for Bridge Design and Navigational

Equipment/Systems Guide for Certification of Lifting Appliances Guide for Crew Habitability on Ships Guide for Dynamic Positioning Systems for DPS-2 Vessels Guide for ‘SafeHull-Dynamic Loading Approach’ for

Vessels Guide for Spectral-Based Fatigue Analysis for Vessels Rules for Building and Classing Marine Vessels (Also referred to as “Marine Vessel Rules (MVR)”)

American National Standards Institutes (ANSI)

ANSI C63.12 Electromagnetic Compatibility Limits, Recommended Practice

ANSI/AGMA 2015-1-A01 Accuracy Classification System - Tangential Measurements for Cylindrical Gears

ANSI/ASA S2.25 Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships

ANSI/ASA S2.26 Vibration Testing Requirements and Acceptance Criteria for Shipboard Equipment

ANSI/ASA S2.27 Guidelines for the Measurement and Evaluation of Vibration of Ship Propulsion Machinery

ANSI/ASA S2.28 Guide for the Measurement and Evaluation of Broadband Vibration of Surface Ship Auxiliary Rotating Machinery

ANSI/BHMA A156.2 Bored and Preassembled Locks and Latches ANSI/BHMA A156.5 Cylinders and Input Devices for Locks ANSI/ISEA Z358.1 American National Standard for Emergency Eyewash and Shower Equipment ANSI/NEMA Z535.2 Environmental and Facility Safety Signs

American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE)

[None] ASHRAE Handbook - HVAC Systems and Equipment Standard 34 Designation and Safety Classification of Refrigerants

American Society of Mechanical Engineers (ASME)

ASME A17.1/CSA B44 Handbook on Safety Code for Elevators and Escalators

ASME A112.19.2/CSA B45.1 Ceramic Plumbing Fixtures ASME B16.5 Pipe Flanges and Flanged Fittings: NPS 1/2 through

NPS 24 Metric/Inch Standard ASME B40.100 Pressure Gauges and Gauge Attachments ASME B46.1 Surface Texture (Surface Roughness, Waviness, and

Lay) ASME BPVC Boiler and Pressure Vessel Code

American Society of Plumbing Engineers (ASPE)

Domestic Water Heating Design Manual

American Society for Testing and Materials (ASTM)

ASTM A480/A480M Standard Specification for General Requirements for Flat- Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

ASTM D975 Standard Specification for Diesel Fuel Oils ASTM F683 Standard Practice for Selection and Application of Thermal

Insulation for Piping and Machinery ASTM F707/F707M Standard Specification for Modular Gage Boards ASTM F718 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet ASTM F721 Standard Specification for Gage Piping Assemblies ASTM F765 Standard Specification for Wildcats, Ship Anchor Chain ASTM F821/F821M Standard Specification for Domestic Use Doors and

Frames, Steel, Interior, Marine ASTM F841 Standard Specification for Thrusters, Tunnel, Permanently

Installed in Marine Vessels ASTM F998 Standard Specification for Centrifugal Pump, Shipboard

Use ASTM F1005 Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration ASTM F1106 Standard Specification for Warping Heads, Rope Handling

(Gypsy Head, Capstan Head)

ASTM F1134 Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

ASTM F1155 Standard Specification for Selection and Application of Piping System Materials

ASTM F1166 Standard Practice for Human Engineering Design for Marine Systems, Equipment and Facilities

ASTM F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy ASTM F1323 Standard Specification for Shipboard Incinerators ASTM F1347 Standard Specification for Manually Operated Fueling Hose

Reels ASTM F1510 Standard Specification for Rotary Positive Displacement

Pumps, Ships Use ASTM F1511 Standard Specification for Mechanical Seals for Shipboard

Pump Applications ASTM F1718 Standard Specification for Rotary Positive Displacement

Distillate Fuel Pumps ASTM F2070 Standard Specification for Transducers, Pressure and

Differential, Pressure, Electrical and Fiber-Optic ASTM F2283 Standard Specification for Shipboard Oil Pollution

Abatement System ASTM F2362 Standard Specification for Temperature Monitoring

Equipment

International Code Council (ICC)

[None] International Plumbing Code

International Electrotechnical Commission (IEC) IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) IEC 60533 Electrical and Electronic Installations in Ships -

Electromagnetic Compatibility IEC 60947-2 Low Voltage Switchgear and Control Gear - Part 2: Circuit

Breakers IEC 61162-1 Maritime Navigation and Radiocommunication Equipment and

Systems - Digital Interfaces - Part 1: Single Talker and Multiple Listeners

IEC 61162-2 Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and Multiple Listeners, High-Speed Transmission

IEC Publication 61000-4

Electromagnetic Compatibility Standard for Industrial Process Measurements and Control Equipment

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std. 45.1 Recommended Practice for Electrical Installations on Shipboard-Design

IEEE Std. 45.2 Recommended Practice for Electrical Installations on Shipboard-Controls

IEEE Std. 45.3 Recommended Practice for Electrical Installations on Shipboard-Systems Engineering

IEEE Std. 45.4 Recommended Practice for Electrical Installations on Shipboard-Marine Sectors and Mission Systems

IEEE Std. 45.5 Recommended Practice for Electrical Installations on Shipboard-Safety Considerations

IEEE Std. 45.6 Recommended Practice for Electrical Installations on Shipboard-Electrical Testing

IEEE Std. 45.7 Recommended Practice for Electrical Installations on Shipboard-AC Switchboards

IEEE Std. 45.8 Recommended Practice for Electrical Installations on Shipboard-Cable Systems

IEEE Std. 518-1982 IEEE Guide for the Installation of Electrical Equipment to Minimize Electrical Noise Inputs to Controllers from External Sources

IEEE Std. 1580 IEEE Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Facilities

IEEE Std. 1709 IEEE Recommended Practice for 1 kV to 35 kV Medium- Voltage DC Power Systems on Ships

IEEE Std. C37.13 IEEE Standard for Low-Voltage AC Circuit Power Breakers Used in Enclosures

IEEE Std. C95.1 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 gHz

International Chamber of Shipping

[None] Guide to Helicopter/Ship Operations

International Maritime Organization (IMO) IMO-110E International Convention for the Safety of Life at Sea

(SOLAS)

IMO-155E International Code for Fire Safety Systems IMO-200E International Maritime Dangerous Goods Code

(IMDG Code) IMO-210E IMDG Code Supplement IMO-520E International Convention for the Prevention of

Pollution from Ships (MARPOL convention) IMO-847E Code on Intact Stability IMO-877M Prevention of Corrosion on Board Ships IMO-904E Convention on the International Regulations for

Preventing Collisions at Sea (COLREG 1972)

IMO FAL.2/Circ.131- MEPC.1/Circ.873- MSC.1/Circ.1586- LEG.2/Circ.3

List Of Certificates And Documents Required To Be Carried On Board Ships, 2017

IMO MSC/Circ. 913 Guidelines For The Approval Of Fixed Water-Based Local Application Fire-Fighting Systems For Use In Category A Machinery Spaces

IMO Resolution MEPC.107(49) Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships

IMO Resolution MEPC.157(55) Recommendations on Standards for the Rate of Discharge of Untreated Sewage from Ships

IMO Resolution MEPC.209(63) Guidelines on Design and Construction to Facilitate Sediment Control on Ships (G12)

IMO Resolution MEPC.227(64) 2012 Guidelines on Implementation of Effluent Standards and Performance Tests for Sewage Treatment Plants

IMO Resolution MSC.215(82) Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks in All Types of Ships and Double-Side Skin Spaces of Bulk Carriers

IMO Resolution MSC.337(91) Code on Noise Level On Board Ships

International Organization for Standardization (ISO)

ISO 484-1 Shipbuilding - Ship Screw Propellers - Manufacturing Tolerances - Part 1: Propellers of Diameter Greater than 2.50 M

ISO 668 Series 1 Freight Containers - Classification, Dimensions And Ratings

ISO 3730 Shipbuilding and Marine Structures - Mooring Winches ISO 4568 Shipbuilding - Sea-Going Vessels - Windlasses and Anchor

Capstans ISO 6482 Shipbuilding - Deck Machinery - Warping End Profiles ISO 8217 Petroleum Products - Fuels (Class F) - Specifications of Marine

Fuels ISO 8468 Ships and Marine Technology - Ship’s Bridge Layout and

Associated Equipment - Requirements and Guidelines ISO 13795 Ships and Marine Technology - Ship’s Mooring and Towing

Fittings - Welded Steel Bollards for Sea-Going Vessels

International Telecommunications Union (ITU)

ITU-R M.1371 Technical Characteristics for an Automatic Identification System Using Time-Division Multiple Access in the VHF Maritime Mobile Frequency Band

National Association of Corrosion Engineers (NACE)

SP0178 Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to be Lined for Immersion Service

National Electrical Manufacturers Association (NEMA)

NEMA MG 1 Motors and Generators

National Fire Protection Association (NFPA)

NFPA 30 Flammable and Combustible Liquids Code NFPA 70E Standard for Electrical Safety in the Workplace NFPA 72 National Fire Alarm and Signaling Code NFPA 86 Standard for Ovens and Furnaces NFPA 400 Hazardous Materials Code NFPA 1901 Standard for Automotive Fire Apparatus NFPA 2001 Standard on Clean Agent Fire Extinguishing Systems

North Atlantic Treaty Organization (NATO)

STANAG 4194 Standardized Wave and Wind Environments and Shipboard Reporting of Sea Conditions

Panama Canal Authority (ACP)

Op Notice to Shipping No. N-1-2015

Vessel Requirements

Society of Allied Weight Engineers (SAWE)

Recommended Practice M-1

Weight Control Technical Requirements for Naval Surface Ships

Society of Naval Architects and Marine Engineers (SNAME)

SNAME T&R Bulletin No. 3-15 Guide to the Design and Testing of Anchors Windlasses for Merchant Ships

SNAME T&R Bulletin No. 3-39 Guide for Shop and Installation Tests SNAME T&R Bulletin No. 3-47 Guide for Sea Trials SNAME T&R Bulletin No. 4-7 Thermal Insulation Report SNAME T&R Bulletin No. 4-16 Recommended Practices for Merchant Ship

Heating, Ventilation and Air Conditioning Design

Society for Protective Coatings (SSPC)

SSPC-SP 1 Solvent Cleaning SSPC-SP 2 Hand Tool Cleaning SSPC-SP 3 Power Tool Cleaning SSPC-SP 7/NACE No. 4 Brush-Off Blast Cleaning

SSPC-SP 10/NACE No. 2 Near-White Metal Blast Cleaning SSPC-SP 11 Power Tool Cleaning to Bare Metal

Suez Canal Authority (SCA)

[None] Rules of Navigation

Underwriters Laboratories (UL)

UL 489 Molded-Case Circuit Breakers, Molded-Case Switches and Circuit-Breaker Enclosures

2.4 ORDER OF PRECEDENCE

Any referenced document directly cited for use or application by an identifying number or name in this specification is a primary reference for each particular use or application for which it is so cited. Any document cited in a primary reference, or in a document referenced therein, is a sub-tier reference. A document that is a sub-tier reference in one application may be a primary reference in another application when it is cited directly. Where the referenced documents use terms similar to “recommendation”, “guideline”, or “guidance” in its title or text, features indicated by the use of such terms shall be mandatory.

In case of conflict between this System Specification and referenced documents, the following order of precedence shall apply:

• The text in this System Specification

• Primary references including ABS Marine Vessel Rules (MVR), except non-mandatory features of Type drawings

• Sub-tier references

The order of precedence of requirements of sections within this System Specification is dependent on the relative broadness of coverage of the various specification sections:

• Requirements within a section applicable to the entire ship (for example, General Requirements for Design and Construction) have the broadest application and apply to all systems and equipment unless otherwise specified in the more detailed sections.

• Requirements within a lead section (for example, a section that includes the general or common requirements for a number of similar systems, such as General Requirements for Piping Systems) have the next broadest application and shall apply to all systems and equipment in its grouping unless specifically modified in detailed system sections.

• Requirements within a detailed system section (for example, a section that includes the details of a particular ship system such as freshwater service systems) are the most specific requirements and apply only for the system covered in the detailed section.

Silence of one document with respect to details shown in another document or in another section of the same document shall not be considered an inconsistency. In cases where additional requirements in references cited herein constitute additional details or features, which do not violate the specified performance, then it shall not be considered a conflict. In these cases, the more stringent requirement shall be met.

In case of conflict between this System Specification and regulatory body, classification, and international regulations and requirements, the more stringent requirement shall take precedence.

If any item specified in this System Specification, or in its mandatory references, exceeds the regulatory body requirements, the more stringent requirement shall be met.

3 REQUIREMENTS

The following are the Government’s systems requirements for the T-ARC class vessels hereafter referred to as “the ship”. The requirements provided herein are supplementary to those required by the classification society, regulatory bodies, and international regulations. Included are requirements for systems and equipment that may or may not be included in the Contractor’s design. For example, if an auxiliary steam system is provided, then the requirements herein applicable to auxiliary steam systems shall be met. However, if the Contractor’s design meets the performance requirements herein without any auxiliary steam services, then the auxiliary steam system requirements, such as shore connections for shore steam, shore condensate, and reserve feed, are not applicable.

The metric system of measurement (International System of Units (SI)) shall be used for all elements of the ship requiring new design except where necessary to interface with existing English unit equipment or systems. NAVSEA publication “Metric Guide for Naval Ship Systems Design and Acquisition” may be used for guidance. Values cited in both SI units and U.S. Customary units typically are not exact equivalents. In these cases, either value may be used.

The effective date for references not specifically dated and/or indicated by revision number shall be those in effect at DD&C contract award. With NAVSEA approval, later effective dates of standards may be used for ease of procurement and cost reduction.

3.070 GENERAL REQUIREMENTS FOR DESIGN AND CONSTRUCTION

3.070.1 SERVICE LIFE

The ship shall be designed and constructed to provide a 40-year service life.

3.070.2 CLASSIFICATION, CERTIFICATION, AND REGULATORY

REQUIREMENTS

The ship shall be designed and constructed to commercial ship standards, complying with Maritime Laws and Regulations of the United States Government including USCG Regulations as applied in Navigation & Vessel Inspection Circular (NVIC) 2-95 Change-3 and ABS Rules for Building and Classing Marine Vessels (Marine Vessel Rules). The ship shall comply with the laws and Federal regulations of the United States and certification and classification requirements included, but not limited to, those specified herein.

The ship shall be certified in accordance with U.S. Coast Guard Regulations for Certification as a Cargo and Miscellaneous Vessel.

3.070.2.1 REGULATORY REQUIREMENTS

The ship, as delivered, shall comply with the applicable regulatory and classification requirements in effect at the time of award of DD&C, including those regulatory and classification requirements formally approved and scheduled for implementation prior to delivery of the ship. Requirements applicable to T-ARC(X) follow.

• Code of Federal Regulations (CFR) - Title 33 - Volume 2 - Chapter I - Subchapter O (Pollution)

• CFR – Title 46 – Subchapter I (Cargo and Miscellaneous Vessels)

• CFR - Title 47 - Volume 5 (Telecommunication)

• Safety of Life at Sea (SOLAS), including applicable amendments

• Federal Communication Commission Regulations on Global Maritime Distress and

Safety System (GMDSS)

• Suez Canal Regulations, for routine transit

• Panama Canal Regulations, for routine transit

• FDA Certificate of Sanitary Construction requirements

• CDC Vessel Sanitation Program 2018 Operations Manual

• Annex I of the International Convention for the Prevention of Marine Pollution from

Ships (MARPOL), 1973, as modified by the Protocol of 1978 relating thereto (MARPOL 73/78)

• EPA Regulations

• Annex III of MARPOL 73/74, Regulations for the Prevention of Pollution by Harmful

Substances Carried by Sea in Packaged Form

• Annex IV of MARPOL 74/74, Regulations for the Prevention of Pollution by Sewage from Ships

• Annex V of MARPOL 73/78, Regulations for the Prevention of Pollution by Garbage from Ships

• Annex VI of MARPOL 73/78, Regulations for the Prevention of Air Pollution from Ships

3.070.2.2 CLASSIFICATION

The ship shall be ABS classed to the ABS Rules for Building and Classifying Marine Vessels (Marine Vessel Rules – MVR) for unrestricted service with the following ABS Notations:

• A1 (Hull and Equipment)

• Circle E (Anchor and Chain Cable Equipment)

• AMS (Machinery and Systems)

• Automated Centralized Control Unmanned (ACCU)

• NIBS (Navigational Bridge Layout and Equipment/Systems) per ABS Guide for Bridge

Design and Navigational Equipment Systems

• Baltic Ice Class I C

• DPS-2 per ABS Guide for Dynamic Positioning Systems

• SH-DLA per ABS Guide for ‘SafeHull-Dynamic Loading Approach’ for Vessels

• SFA (40) per ABS Guide for Spectral-Based Fatigue Analysis for Vessels

• UWILD (Underwater Inspection in Lieu of Drydocking)

• NVIC 2-95 Change 3 ACP

• Crane Register Certificate (CRC) as applicable (SC, SElev, OC, OC-Subsea, OC-PL) per

ABS Guide for Certification of Lifting Appliances

3.070.2.3 CERTIFICATION

The Contractor shall obtain all required regulatory body and Government approvals and certifications to show vessel compliance with requirements identified herein. In addition to those certificates and documents required by IMO FAL.2/Circ.131-MEPC.1/Circ.873- MSC.1/Circ.1586-LEG.2/Circ.3 and the USCG, the following Certifications are required with vessel delivery:

• ABS Classification Certificates (Interim at delivery)

• U.S. Coast Guard Certificate of Inspection

• USCG Underwater Inspection in Lieu of Drydocking (UWILD) in accordance with

NVIC 1-89

• Panama Canal Tonnage Certificate

• Suez Canal Tonnage Certificate

• Food and Drug Administration Certificate of Sanitary Construction (The FDA will issue a Certificate of Sanitary Construction using the requirements in the CDC Vessel Sanitation Program 2018 Operations Manual)

• ABS Lifting Appliance Certification

• Naval Ordnance Safety and Security Activity (NOSSA) Explosives Safety Design

Validation (ESDV)

• Gangway Winch Wire Certificate(s) as applicable

• Dumbwaiter Certificate(s) as applicable

• Passenger Elevator Certificate(s) as applicable

• Cargo Ship Safety Construction Certificate (SLC)

• Cargo Ship Safety Equipment Certificate (SLE), including Record of Equipment

• Cargo Ship Safety Radio Certificate (SLR), including Record of Equipment

• International Regulations for Avoiding Collisions at Sea (COLREGS)

• USCG UWILD in accordance with NVIC 1-89

• Statements of Voluntary Compliance (SOVC) Certificates from ABS in lieu of the following:

• Voyage Data Recorder Certificate of Compliance

• International Sewage Pollution Prevention Certificate (ISPP)

• International Garbage Pollution Prevention Certificate (IGPP)

• International Air Pollution Prevention Certificate (IAPP)

• International Energy Efficiency Certificate

• International Anti-fouling System Certificate

• International Ballast Water Management Certificate

• International Oil Pollution Prevention Certificate (IOPP)

• Statements of Fact (SOF) Certificates from ABS are acceptable in lieu of the following:

• International Maritime Dangerous Goods Code (IMDG)

3.070.3 SHIP CHARACTERISTICS

Navigation draft at full load in seawater shall not exceed 8.07 m (26.5 ft).

The ship shall be capable of transiting the new Panama and Suez canals.

Sustained speed shall be 15 knots. Sustained speed shall be measured at Full Load Departure condition in calm water (no current, wind, or waves), clean bottom and propeller(s) using a maximum of 85% of the propulsors rated power.

Unrefueled range shall be a minimum of 14,500 nm at 15 knots in calm seas. Unrefueled range shall be in accordance with Appendix B.

Bollard pull shall be at least 120 MT in calm water at zero speed. The ship shall be capable of producing thrust of at least 80 MT at speeds up to 1 knot through sea state 5.

The ship, the Sea Plow, and the Sea Plow LARS shall be capable of accommodating Plow tow wire tensions of up to the maximum bollard pull of 120 MT, and capable of continuous Plow tow wire tension of up to 80 MT.

An emergency medical evacuation capability via helicopter is required.

The ship shall be operated and crewed by the MSC under the administrative command of the Special Mission Programs, PM2. MSC habitability standards shall be used for MSC crew, mission personnel and the Embarked Security Team (EST) per Military Sealift Command QMS N0720-110.00-P Habitability Standards for New Construction Large Ships and QMS N0720- 111.00-P Steward Department and Food Service Standards for New Construction Large Ships.

Table 3.070.3-1 summarizes projected accommodation number requirements. Berthing areas shall be sized to permit a wide range of male to female ratios.

Table 1: [3.070.3-1] Number of Personnel Ship Grade (MSC)

Master & Chief Engineer 2 Other Licensed 17 Chief Petty Officer (CPO) 14 Unlicensed 42 Total 75

Mission Personnel

Licensed 27 Total 27

EST Officer (MSC licensed equivalent) 1 Chief Petty Officer /Senior Non-Commissioned Officer (MSC licensed equivalent)

Enlisted (MSC unlicensed equivalent) 10 Total 12

Grand Total 114

3.070.4 OPERATING PROFILE AND CONCEPT OF OPERATIONS

The notional annual operating profile is shown in Table 3.070.4-1.

Table 2: [3.070.4-1] Notional Annual Operating Profile Operating Condition Days per

Year Speed3 (knots)

Dynamic Positioning

In-port (hot)1 14 - - In-port (cold)2 42 - - Maintenance (hot)1 55 - - Maintenance (cold)2 55 - - Transit 44 15 No Cable Installation with Sea Plow

52 1 Yes

Cable Installation without Sea Plow

38 3.5 Yes

Cable Repair with ROV and UUV and Package Ops

57 0.50 Yes

Bathymetric Survey and Projector Tow

8 10 Yes

Total 365 - -

Notes:

1. Hot Condition: On ship’s power

2. Cold Condition: On shore power

3. Average speed in operating condition

The Concept of Operations (CONOPS) is provided in Appendix C.

3.070.5 ENVIRONMENTAL CONDITIONS

3.070.5.1 TEMPERATURES AND HUMIDITY

The ship and all its systems shall be capable of getting underway and operating in the environmental conditions shown in Table 3.070.5.1-1:

Table 3: [3.070.5.1-1] Environmental Conditions – Temperatures and Humidity Maximum Minimum Outside Dry Bulb Temperature, °C 40 -18 Relative Humidity, Percent 95 0 Seawater Temperature, °C 35 -2

Equipment and machinery exposed to weather shall be capable of operating at an ambient temperature between -30 °C (-22 F) and 49 °C (120 F) and humidity of 0% to 100%. Equipment and machinery internal to the ship shall be rated at no less than the compartment design temperature in which installed.

The machinery necessary to operate the ship’s machinery plant shall be capable of starting and operating continuously over the ambient temperature range of -30 °C (-22 F) to 49 °C (120 F) with a relative humidity of 0% to 100%.

3.070.5.2 WIND, SNOW, ICE, AND GREENWATER LOADS

Ship structure, systems, and equipment exposed to the weather shall withstand a horizontal wind loading of 1.5 kN/m2 (31.3 lb/ft2) of projected area. Ship structure shall withstand a snow and ice weight of 0.4 kN/m2 (8.35 lb/ft2) on exposed surfaces. Exposed systems and equipment shall start and operate properly when initially covered with an ice weight of 0.22 kN/m2 (4.59 lb/ft2) on exposed surfaces.

Foundations and the structures that support them shall withstand a horizontal wave slap loading of 24 kN/m2 (500 lb/ft2) acting on the projected area of that portion of equipment and machinery mounted in the weather that is located beneath the height corresponding to the head required by ABS for weather deck design.

3.070.6 MANEUVERABILITY

The ship shall be directionally stable at all speeds in all loading conditions. The ship shall be capable of achieving a steady turning diameter of no more than four ship lengths in either direction at sustained speed, at full load condition and in calm water, without use of the bow thruster. The average yaw overshoot angle from the second overshoot on shall be no more than 10° for a 10-10 zig-zag maneuver at all speeds at full load. The track reach in a crash stop from transit speed shall be no more than 15 ship lengths.

The maneuverability requirements shall apply to the ship operating in deep, calm water without wind or current. Maneuverability requirements shall be met without the assistance of transverse thrusters, even if thrusters are provided.

3.070.7 MASS PROPERTIES AND STABILITY LIMITS

Weight estimates shall include Contractor-specified acquisition margins and Government-controlled margins for contract modifications and Government Furnished Material (GFM).

Weight and KG acquisition margins shall be in accordance with the guidance provided in Naval Sea Systems Command Instruction (NAVSEAINST) 9096.6B.