Attachment_E_Food_Services_Drawings.pdf
PDF 11 MB Posted
- Solicitation number
- RFP 32101-01232026-SR1
- Issued by
- Davidson County, Tennessee
About this file
This is a food service equipment drawing and specification document for the Multi-Agency Law Enforcement Training Academy (MALETA) housing, dining, and kennel facility located at 6300 Cockrill Bend Circle in Nashville, Tennessee. The document provides comprehensive architectural and engineering drawings for a commercial kitchen and servery designed to support intensive law enforcement training operations. The facility encompasses multiple functional areas including food storage (walk-in coolers and freezers for produce, general merchandise, and specialized temperature zones), preparation stations (cooking, baking, salad preparation), serving areas (soup, deli, pizza, short order, grab-and-go, and merchandiser stations), and a complete warewashing and soiled-ware handling system. The equipment schedule (FS-0.2) lists 228 items ranging from basic storage shelving and preparation tables to specialized equipment including combi ovens, tilting kettles, convection ovens, fryers, ice makers, and a high-temperature flight-type dish machine. The drawings indicate capacity for producing up to 1,400 meals per service period with three daily service periods (Sunday dinner through Friday lunch, plus weekend and holiday meals). The contract establishes a five-year dining services term with projected annual meal volumes increasing from 200,000 meals in Year 1 to 292,820 meals in Year 5, plus 300 to 439 special event meals annually. A virtual pre-response conference was scheduled for July 1, 2026, with written questions due July 8, 2026 at 2:00 p.m. and proposals due August 5, 2026 at 2:00 p.m.
The drawings specify detailed mechanical, electrical, and plumbing (MEP) requirements for all equipment including utility connections, refrigeration lines, drainage systems, and electrical circuits. All utility materials, piping, conduit, and installation work are the responsibility of the general contractor and respective trade contractors (plumbing, electrical, refrigeration, and HVAC), while the kitchen equipment contractor furnishes equipment and pre-engineered components. The facility design incorporates remote refrigeration condensing units located on the roof with lines concealed above the finished ceiling, 6-inch diameter soda conduits with minimum 24-inch sweeping bends running below the floor slab, and comprehensive drainage systems including floor troughs with anti-spill features and grease trap provisions. Compliance requirements include adherence to Tennessee Department of Health regulations, FDA Food Code standards, local building codes, and all applicable state and local codes for utilities and construction. The state provides the building facility, all installed equipment, utilities (excluding grease and cooking oil disposal), office space, internet connectivity, printer, furniture, and secure storage, while the food service contractor bears responsibility for food sourcing, preparation, beverages, disposables, smallwares, health inspections, trash removal, and grease disposal.
View the file
Other files
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
F S
-2 .1
F S
-2 .1
F S
-1 .1
F S
-1 .1
R
MERCHANDISE
FREEZER
MERCHANDISE
COOLER
NON FOOD STORAGE
GENERAL
FREEZER
THAW COOLER
FREEZER
PRODUCE
COOLER
GENERAL
COOLER
POT WASHING
STAGING
PREP
COOK
COOK
PREP
JAN. CLOS.
DRY
STORAGE
FUTURE
COOLER
RECEIVING
PREP PREP
PREP
F
F
PIZZA SHORT ORDER
SALAD
GRAB-N-GO
DELI SOUP
DINING
ICE
R R
R HR
R R
RR
WAREWASH
J.C.
TRAY RETURN
TRAY RETURN
BEVERAGE
BEVERAGE
CASHIER
REF. DISPLAY
REF. DISPLAY
DESSERT
COLDENTREE
TRAYS
TRAYS
ENTREE COLD
DESSERT
H R
H R
H/P R
B/C
CASHIER
CASHIER
OFFICEOFFICEOFFICE
R
R
R
TRAYS
TRAYS
PREP
STAGING
SODA
1 1
R.O.
DINING
DINING
DINING
DINING
7 9 10 11 1312 14 15 16 17 18
E
H
F
G
D
J
OFFICE
BAKE
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:5
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
OVERALL KITCHEN /
SERVERY /
WAREWASH
EQUIPMENT PLAN
FS-0.1
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/8" = 1'-0"
OVERALL KITCHEN / SERVERY / WAREWASH EQUIPMENT PLAN
FOOD SERVICE SHEET INDEX
NUMBER NAME
FS-0.1 OVERALL KITCHEN / SERVERY / WAREWASH EQUIPMENT PLAN
FS-0.2 SCHEDULE OF EQUIPMENT
FS-1.1 KITCHEN AND SERVERY EQUIPMENT PLAN
FS-1.2 KITCHEN AND SERVERY PLUMBING PLAN
FS-1.3 KITCHEN AND SERVERY ELECTRICAL PLAN
FS-1.4 KITCHEN AND SERVERY SLAB PENETRATION & SODA CONDUIT PLAN
FS-1.5 KITCHEN AND SERVERY SPECIAL CONDITIONS PLAN
FS-1.6 KITCHEN AND SERVERY REFRIGERATION PLAN
FS-2.1 SERVERY AND WAREWASH EQUIPMENT PLAN
FS-2.2 SERVERY AND WAREWASH PLUMBING PLAN
FS-2.3 SERVERY AND WAREWASH ELECTRICAL PLAN
FS-2.4 SERVERY AND WAREWASH SLAB PENETRATION & SODA CONDUIT PLAN
FS-2.5 SERVERY AND WAREWASH SPECIAL CONDITIONS PLAN
FS-3.1 ROOF REMOTE CONDENSING UNIT EQUIPMENT & ELECTRICAL PLAN
FS-3.2 ROOF REMOTE CONDENSING UNIT REFRIGERATION & SPECIAL CONDITIONS PLAN
FS-4.1 MEP SCHEDULES
FS-4.2 MEP NOTES AND SYMBOLS
FS-4.3 DETAILS / WALL BACKING DETAILS
FS-4.4 ADA DETAILS
FS-5.1 ISOMETRIC AND ELEVATIONS VIEWS
FS-5.2 ISOMETRIC AND ELEVATION VIEWS
FS-5.3 ISOMETRIC AND ELEVATION VIEWS
FS-5.4 ISOMETRIC AND ELEVATION VIEWS
FS-5.5 ISOMETRIC AND ELEVATION VIEWS
FOOD SERVICE SHEET INDEX
NUMBER NAME
FS-5.6 ISOMETRIC AND ELEVATION VIEWS
FS-5.7 ISOMETRIC AND ELEVATION VIEWS
FS-5.8 ISOMETRIC AND ELEVATION VIEWS
FS-6.1 HOOD DRAWING 1 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.2 HOOD DRAWING 2 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.3 HOOD DRAWING 3 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.4 HOOD DRAWING 4 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.5 HOOD DRAWING 5 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.6 HOOD DRAWING 6 OF 13 CAPTIVIVE AIRE DOCUMENTS
FS-6.7 HOOD DRAWING 7 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.8 HOOD DRAWING 8 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.9 HOOD DRAWING 9 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.10 HOOD DRAWING 10 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.11 HOOD DRAWING 11 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.12 HOOD DRAWING 12 OF 13 CAPTIVE AIRE DOCUMENTS
FS-6.13 HOOD DRAWING 13 OF 13 CAPTIVE AIRE DOCUMENTS
FS-7.1 CHAMPION FLIGHT TYPE DISH MACHINE
FS-7.2 SOILEDWARE HANDLING SYSTEM 1 OF 2 CHAMPION DOCUMENTS
FS-7.3 SOILEDWARE HANDLING SYSTEM 2 OF 2 CHAMPION DOCUMENTS
FS-8.1 COOLER DRAWING 1 OF 2 KOLPAK DOCUMENTS FOR ITEM #12
FS-8.2 COOLER DRAWING 2 OF 2 KOLPAK DOCUMENTS FOR ITEM #12
FS-8.3 COOLER DRAWING 1 KOLPAK DOCUMENT FOR ITEM #71
FS-8.4 COOLER DRAWING 1 OF 2 KOLPAK DOCUMENTS FOR ITEM #163
FS-8.5 COOLER DRAWING 2 OF 2 KOLPAK DOCUMENTS FOR ITEM #163
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:0
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SCHEDULE OF
EQUIPMENT
FS-0.2
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
SCHEDULE OF EQUIPMENT
ITEM QTY. DESCRIPTION MANUFACTURER MODEL NUMBER REMARKS
1 1 MOP SINK/CAN WASH IMC TEDDY DL-20-1 -
2 1 MOP/BROOM RACK ADVANCE TABCO K242 -
3 23 MOBILE TRASH RECEPTACLE - - BY OWNER
4 1 DUNNAGE RACK METRO HP2248PDMB -
5 LOT CHEMICAL STORAGE SHELVING METRO MAX Q -
6 1 S/S STANDARD FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
7 - SPARE NUMBER - - -
8 LOT OVERHEAD DRY STORAGE TRACK SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
9 LOT S/S CORNER GUARD FABRICATOR CUSTOM -
10 - SPARE NUMBER - - -
11 LOT DRY STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
12 1 WALK-IN COOLER FREEZER ASSEMBLY KOLPAK CUSTOM W/ E-CONTROL MONITORING N EACH COMPARTMENT
13 1 BLOWER COIL +35° KOLPAK CUSTOM FOR THAW COOLER
14 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR THAW COOLER
15 8 REMOTE CONDENSING UNIT STAND FABRICATOR CUSTOM 7 (NEW) 1 (FUTURE)
16 LOT THAW COOLER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
17 36 MOBILE PAN RACK CHANNEL WA03 (2) FUTURE
18 - SPARE NUMBER - - -
19 - SPARE NUMBER - - -
20 - SPARE NUMBER - - -
21 LOT OVERHEAD GENERAL FREEZER TRACK SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
22 LOT GENERAL FREEZER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
23 1 BLOWER COIL -10° KOLPAK CUSTOM FOR GENERAL FREEZER
24 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR GENERAL FREEZER
25 LOT FREEZER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
26 - SPARE NUMBER - - -
27 1 BLOWER COIL -10° KOLPAK CUSTOM FOR FREEZER
28 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR FREEZER
29 - SPARE NUMBER - - -
30 - SPARE NUMBER - - -
31 LOT GENERAL COOLER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
32 LOT OVERHEAD GENERAL COOLER TRACK SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
33 2 BLOWER COIL + 35° KOLPAK CUSTOM FOR GENERAL COOLER
34 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR GENERAL COOLER
35 LOT PRODUCE COOLER STORAGE SHELVING METRO MAX Q W/ SOILID BOTTOM SHELF
36 - SPARE NUMBER - - -
37 1 BLOWER COIL + 35° KOLPAK CUSTOM FOR PRODUCE COOLER
38 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR PRODUCE COOLER
39 - SPARE NUMBER - - -
40 - SPARE NUMBER - - -
41 2 WATER FILTRATION SYSTEM EVERPURE EV9275-02 -
42 2 SODA SYSTEM - - BY VENDOR
43 1 S/S WALL SHELF FABRICATOR CUSTOM -
44 2 AMBIENT CARBONATOR - - BY VENDOR
45 1 REVERSE OSMOSIS WATER FILTRATION SYSTEM EVERPURE EZ-RO 375/16ATM -
46 1 DUNNAGE RACK METRO HP2230PDMB -
47 LOT NON-FOOD STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
48 - SPARE NUMBER - - -
49 - SPARE NUMBER - - -
50 1 PREPARATION TABLE W/ SINKS FABRICATOR CUSTOM -
50.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT -
51 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
52 2 FOOD PROCESSOR ROBOT COUPE R502 -
53 1 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
53.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
54 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
55 8 HAND SINK W/ SIDE SPLASHES IMC TEDDY ADA-WS W.O./ SOAP AND TOWELL DISPENSER
56 1 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
56.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
57 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
58 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
59 1 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
59.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
60 - SPARE NUMBER - - -
61 1 5 QT. MIXER GLOBE SP05 -
62 1 PREPARATION TABLE W/ SINKS FABRICATOR CUSTOM -
62.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT -
63 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
64 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
65 1 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
65.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
66 1 MOBILE MIXER STAND FABRICATOR CUSTOM W/ UTILITY TREE
67 1 20 QT. MIXER GLOBE SP20 -
68 1 MOBILE SLICER STAND FABRICATOR CUSTOM -
69 1 SLICER GLOBE S13A -
70 - SPARE NUMBER - - -
71 1 WALK-IN COOLER ASSEMBLY KOLPAK CUSTOM (FUTURE)
72 LOT COOLER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF (FUTURE)
73 1 BLOWER COIL + 35° KOLPAK CUSTOM FOR COOLER (FUTURE)
74 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR COOLER (FUTURE)
75 2 GLASS COOLER DOORS KOLPAK CUSTOM (FUTURE)
76 1 PREPARATION TABLE W/ SINKS FABRICATOR CUSTOM -
76.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT -
77 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
78 2 SCALE EDLUND DCS-2 -
79 - SPARE NUMBER - - -
80 1 PREPARATION TABLE FABRICATOR CUSTOM -
81 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
82 3 EYE WASH STATION T&S BRASS EW-7360B-TMV -
83 1 HOOD UTILITY CABINET / FIRE SUPPRESSION CAPTIVE AIRE CUSTOM FOR HOOD #85
84 LOT S/S WALL FLASHING FABRICATOR CUSTOM -
85 1 EXHAUST HOOD CAPTIVE-AIRE CUSTOM -
86 3 COMBI OVEN W/ STAND ALTO-SHAAM PRO 7-20G -
87 1 20 GAL. TILTING KETTLE GROEN DH-20A W/ DOUBLE PANTRY FAUCET
88 1 40 GAL. TILTING KETTLE GROEN DH-40A W/ DOUBLE PANTRY FAUCET
89 1 HOOD UTILITY CABINET / FIRE SUPPRESSION CAPTIVE AIRE CUSTOM FOR ITEM HOOD #94
90 1 S/S ANTI SPILL FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
91 2 S/S ANTI SPILL FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
92 1 40 GAL. TILTING BRAISING PAN GROEN BPM-40GA W/ DOUBLE PANTRY FAUCET
93 3 DUAL COMBI OVEN MANIFOLD EVERPURE 164-89912 -
94 1 EXHAUST HOOD CAPTIVE-AIRE CUSTOM -
95 2 DOUBLE CONVECTION OVEN GARLAND MCO-GS-20-ESS W/ CASTERS
96 1 6 BURNER RANGE W/ CONVECTION OVEN GARLAND C36-6C W/ CASTERS
97 1 POT FILLER T&S BRASS B-0594-CR -
98 (11) SETS WHEEL POSITION DEVICE T&S BRASS POSI-SET -
99 LOT S/S WALL FLASHING FABRICATOR CUSTOM -
100 1 LANDING TABLE W/ OVERSHELF & UTENSIL RACK FABRICATOR CUSTOM -
101 2 COUNTER TOP CHAR BROILER GARLAND GTBG36-AR36 W/ 8" PLATE SHELF
102 1 REFRIGERATED EQUIPMENT STAND CONTINENTAL D108GN W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
103 3 COUNTER TOP GRIDDLE W/ THERMOSTAT GARLAND GTGG36-GT36M W/ 8" PLATE SHELF
104 1 DOUBLE FRYER/FILTER ASSEMBLY PITCO SE14S-2FD W/ CASTERS
105 2 FREEZER (ONE W/ SS BACK) CONTINENTAL D1FENSS W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
106 1 LANDING TABLE W/ OVERSHELF & UTENSIL RACK FABRICATOR CUSTOM -
107 1 BLAST CHILLER / SHOCK FREEZER IRINOX EASYFRESH NEXT LL -
108 2 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
108.1 2 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
109 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
110 1 PREPARATION TABLE W/ SINKS FABRICATOR CUSTOM -
110.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT -
111 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
112 1 INTELLIGATE TEMPERARTURE MONITORING SYSTEM E-CONTROL SYSTEMS IG1-1000ZB W/ REQUIRED E. SENSORS/INTELLICHECK AND INTELLIRINSE
SCHEDULE OF EQUIPMENT
ITEM QTY. DESCRIPTION MANUFACTURER MODEL NUMBER REMARKS
113 1 WATER FILTRATION SYSTEM EVERPURE EV9324-02 -
114 1 ICE STORAGE BIN HOSHIZAKI B-700SF -
115 1 S/S STANDARD FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
116 - SPARE NUMBER - - -
117 1 CUBE ICE MAKER HOSHIZAKI KM-1100MAJ AIR COOLED
118 2 MOBILE ICE BIN CAMBRO ICS100L -
119 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
120 1 PREPARATION TABLE FABRICATOR CUSTOM -
121 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
122 1 CONVEYOR TOASTER HATCO TQ-10 -
123 1 PREPARATION TABLE FABRICATOR CUSTOM -
124 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
125 1 SMART WALL G3 (SHORT WALL) METRO CUSTOM GREY
126 4 REFRIGERATED SANDWICH PREPARATION UNIT CONTINENTAL D60N24M-FB-D W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
127 1 PREPARATION TABLE W/ SINK FABRICATOR CUSTOM -
127.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
128 4 ROLL-IN REFRIGERATOR CONTINENTAL D2RINSS-E W/ EXPANSION VALVE / E-CONTROL MONITORING
129 1 MOBILE HEATER/PROOFER METRO C539-CFC-U -
130 - SPARE NUMBER - - -
131 3 INGREDIENT BIN CAMBRO IBS27148 -
132 1 SMART WALL G3 (TALL WALL) METRO CUSTOM GREY
133 1 BAKER'S TABLE W /SINK FABRICATOR CUSTOM -
133.1 1 SPLASH MOUNT FAUCET T&S BRASS B-0231-CR-KIT MOD 061X -
134 1 60 QT. MIXER GLOBE SP60 -
135 LOT MIXER ACCESSORY STORAGE SHELVING METRO S.E. BRITE -
136 1 WALL MOUNTED HOSE REEL W/ MIXING CABINET T&S BRASS B-2339 -
137 3 MOBILE POT PAN DRYING RACK METRO PR48VX3-XDR -
138 2 S/S STANDARD FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
139 - SPARE NUMBER - - -
140 - SPARE NUMBER - - -
141 1 3-COMPARTMENT POT / PAN WASH SINK FABRICATOR CUSTOM -
141.1 2 SPLASH MOUNT FAUCET T&S BRASS B-0290-04 -
142 1 SMART WALL G3 (TALL WALL) METRO CUSTOM GREY
143 2 REFRIGERATED MERCHANDISE DISPLAY CASE TRUE GDM-33-HC-LD -
144 1 COUNTER FABRICATOR CUSTOM W/ LOCKING DOORS / DRAWERS
145 1 SLAT WALL FABRICATOR CUSTOM -
146 1 UNDERCOUNTER FREEZER CONTINENTAL SWF27-U-GD W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
147 1 MICROWAVE OVEN SHARP R-21LCF -
148 3 FLOATING WALL SHELF FABRICATOR CUSTOM -
149 1 UNDERCOUNTER REFIGERATOR CONTINENTAL D48N-U W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
150 1 FLASH BAKE OVEN TURBOCHEF i3 -
151 1 S/S WALL SHELF FABRICATOR CUSTOM -
152 1 BACK COUNTER W/ SINK FABRICATOR CUSTOM QUARTZ TOP / S/S BODY
152.1 1 DECK / WORKBOARD MOUNTED FAUCET T&S BRASS B-1120-CR-LN W/ 061X W/ B-0426
153 1 PROOFER / OVEN NU-VU QBT-5/10 W/ CASTERS
154 1 ROLL-IN HEATED CABINET CONTINENTAL DL1WI-SS-E W/ E-CONTROL MONITORING
155 - SPARE NUMBER - - -
156 6 HAND SINK W/ SIDE SPLASHES ADVANCE TABCO 7-PS-66W -
157 1 TRAY / SOUP / SANDWICH SERVING COUNTER FABRICATOR CUSTOM W/ PLATE SHELF
158 2 1 TIER FOOD SHEILD W/ LED LIGHTS PREMIER CUSTOM -
159 4 DROP-IN SOUP WELL WELLS SS10TDUIAF -
160 - SPARE NUMBER - - -
161 1 MULTI TIERED BREAD DISPLAY W/ SHIELDS PREMIER CUSTOM -
162 1 1 TIER FOOD SHIELD W/ LED LIGHTS PREMIER CUSTOM FLAT FRONT SHIELDS
163 1 WALK-IN MERCHANDISE COOLER / FREEZER KOLPAK CUSTOM W/ E-CONTROL MONITORING IN EACH COMPARTMENT
164 1 BLOWER COIL -10° KOLPAK CUSTOM FOR MERCHANDISE FREEZER
165 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR MERCHANDISE FREEZER
166 2 FREEZER MERCHANDISE SHELVING KOLPAK CUSTOM -
167 2 GLASS MERCHANDISE FREEZER DOORS KOLPAK CUSTOM -
168 LOT MERCHANDISE FREEZER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
169 5 GLASS MERCHANDISE COOLER DOORS KOLPAK CUSTOM -
170 - SPARE NUMBER - - -
171 - SPARE NUMBER - - -
172 1 BLOWER COIL + 35° KOLPAK CUSTOM FOR MERCHANDISE COOLER
173 1 REMOTE CONDENSING UNIT KOLPAK CUSTOM FOR MERCHANDISE COOLER
174 LOT MERCHANDISE COOLER STORAGE SHELVING METRO MAX Q W/ SOLID BOTTOM SHELF
175 5 COOLER MERCHANDISE SHELVING KOLPAK CUSTOM W/ SOILD BOTTOM SHELF
176 1 REFRIGERATOR CONTINENTAL D1RSENSS W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
177 1 REFRIGERATED PIZZA PREPARATION UNIT CONTINENTAL PA43N-D W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
178 1 SHORT ORDER EXHAUST HOOD CAPTIVE-AIRE CUSTOM W/ CONTROL CABINET / FIRE SUPPRESSION
179 - SPARE NUMBER - - -
180 - SPARE NUMBER - - -
181 1 DOUBLE STACK CONVEYOR OVEN LINCOLN 1133-000-U W/ STAND
182 LOT S/S WALL FLASHING FABRICATOR CUSTOM -
183 1 REFRIGERATED EQUIPMENT STAND CONTINENTAL D72GN W/ CASTERS / EXPANSION VALVE / E-CONTROL MONITORING
184 1 SINGLE FRYER / FILTER ASSEMBLY PITCO SE14S-1FD W/ CASTERS
185 1 TRAY / ENTREE / PIZZA SERVING COUNTER FABRICATOR CUSTOM W/ PLATE SHELF
186 3 1 TIER FOOD SHEILD W/ HEAT / LED LIGHTS PREMIER CUSTOM -
187 4 2-WELL HOT/COLD FOOD UNIT WELLS HRCP-7200 W/ /AUTO-FILL
188 1 1 TIER FOOD SHEILD W/ HEAT / LED LIGHTS PREMIER CUSTOM FLAT SHIELD IN FRONT OF SANDWICH PREP UNIT / NO HEAT OVER PREP.
189 2 ROLL-IN HEATED CABINET CONTINENTAL DL2WI-SS-E W/ E-CONTROL MONITORING
190 1 TRAY / ENTREE / DESSERT / SERVING COUNTER FABRICATOR CUSTOM W/ PLATE SHELF
191 1 DROP-IN REFRIGERATED COLD PAN WELLS RCP-7300 -
192 1 HEATED SANDWICH SLIDE HATCO GR2SDS-48D -
193 1 DOUBLE SIDED SALAD COUNTER FABRICATOR CUSTOM W/ PLATE SHELF
194 4 DROP-IN REFRIGERATED COLD PAN WELLS RCP-7400 -
195 1 DOUBLE SIDED 1TIER FOOD SHIELD W/ LED LIGHTS PREMIER CUSTOM -
196 1 TRAY / ENTREE / DESSERT / SERVING COUNTER FABRICATOR CUSTOM W/ PLATE SHELF
197 6 1 TIER FOOD SHEILD W/ HEAT / LED LIGHTS PREMIER CUSTOM -
198 6 2-WELL HOT FOOD UNIT W/ AUTO FILL WELLS MOD-200TDM/AF -
199 2 1 TIER FOOD SHEILD W/ LED LIGHTS PREMIER CUSTOM -
200 2 BACK COUNTER FABRICATOR CUSTOM QUARTZ TOP / S/S BODY
201 2 2 TIER FOOD SHIELD W/ LED LIGHTS PREMIER CUSTOM -
202 2 DROP IN, FROST TOP HATCO FTB-S2 -
203 2 REFRIGERATED GRAB-N-GO CASE STRUCTURAL CONCEPTS BN57R W/ LOCKING NIGHT COVER
204 3 DOUBLE-SIDED CASHIER STAND FABRICATOR CUSTOM -
205 3 PRINTER - - BY OWNER
206 3 POS SYSEM - - BY OWNER
207 2 BEVERAGE COUNTER FABRICATOR CUSTOM -
208 8 COUNTER TOP CUP DISPENSER SAN JAMAR C2903 -
209 2 WATER FILTRATION SYSTEM EVERPURE EV9272-27 W/ (2) EV969331 CARTRIDGES / FOR ICE MAKER #212
210 4 WATER FILTRATION SYSTEM EVERPURE QTCR-1 FOR BEVERAGE EQUIPMENT, ITEM #213 / #214
211 2 DROP-IN ICE / SODA DISPENSER FOLLETT VU300M20DP -
212 2 CUBLETTE ICE MAKER FOLLETT HCC1010AVS AIR COOLED
213 4 DUAL ICED TEA BREWER W/ URNS - - BY VENDOR
214 2 COFFEE BREWER W/ URNS - - BY VENDOR
215 7 MOBILE POKER CHIP DISH DOLLY METRO PCD11A -
216 3 S/S STANDARD FLOOR TROUGH W/ GRATE IMC TEDDY CUSTOM SIZE AS SHOWN PER PLAN
217 2 MOBILE TRASH TRUCK - - BY OWNER
218 1 MOP / STORAGE CABINET IMC TEDDY CMSC-R -
219 2 S/S WALL SHELF FABRICATOR CUSTOM -
220 - SPARE NUMBER - - -
221 4 MOBILE SILVER SOAK SINK BI-LINE CUSTOM -
222 1 TROUGHVEYOR SALVAJOR 500-TVL W/ T&S BRASS B-0455
223 1 TROUGHVEYOR SALVAJOR 500-TVR W/ T&S BRASS B-0455
224 1 SOILEDWARE HANDLING SYSTEM W/ CONVEYOR BI-LINE CUSTOM W/ OVERHEAD RACK STORAGE / SIGHT AND SOUND BARRIER / DROP OFF WINDOWS
225 1 HIGH TEMP FLIGHT TYPE DISH MACHINE CHAMPION EUCCW6 PRO W/ DRAIN TEMPERING KIT
226 1 WATER SOFTENING SYSTEM CHAMPION CC208C -
227 2 EXHAUST DUCT FABRICATOR CUSTOM FOR ITEM# 225
228 12 MOBILE CUP/GLASS RACK DOLLY METRO D2121C -
FS-5.2AFS-5.1B C
R H
R
R
R
FS-5.4
C
HP
FS-5.3C
FS-5.3 B
FS-5.5
A
FS-5.2 B
D
FS-5.2
D
FS-5.4
E
FS-5.6
B
FS-5.5
B
D
MERCHANDISE
FREEZER
MERCHANDISE
COOLER
NON-FOOD STORAGE
6 8 8
11 11
42 43 44 42 44
171717
17 17 66 67 68
GENERAL
FREEZER
THAW COOLER
FREEZER
PRODUCE
COOLER
GENERAL
COOLER
POT WASHING
PREP
COOK
COOK
JAN. CLOS.
DRY
STORAGE
COOLER
RECEIVING
72 72
PREP
PREP
PREP
76.1
53.1
50.1
56.1
59.1
98 F
61 55
65.1
110.1
FS-5.4 A
12817 17
17129131131133135
75 75
17 17
166166 167
R
149 150 151 17126126
/1 FS-2.1
/1 FS-2.1
F
159159159159158162
R
181 182 98 101 103 98183 98 18498
186187126187188191192
194 194195
PIZZA
SHORT ORDER
SALAD
GRAB-N-GO
DELI SOUP
DINING
ICE
133.1 131
MANAGER
CLERICAL
PRODUCTION
MANAGER
R
34" 34"
36"
36"36"
34" 24"24"
34"
34" 24"
24"
24"
24"
24"
24"
24"
B/C
15341
FS-5.4
B
47 47
FS-5.4
D
FS-5.1 D
PURCHASE
MANAGER
108.1
127.1
108.1
62.1
PREP
PREP
PREP
PREP
9 9
137137137
138 138
R
R
R R
P.O.
47 47 47
136136
3 3141 142 141.1141.1
152.1
7 9 10 11 1312
E
H
F
G
D
J
34"
FS-5.1
E
83 89
F/B
FS-5.2C
/1 FS-2.1
BAKE
SODA
9 9
9 9
9 9
FS-5.1 A
FS-5.3 A
FS-5.2E
NOTE:
REFER TO FS-6.1 thru FS-6.13 FOR
EXHAUST HOOD DOCUMENTS
FS-5.6
A
MW
R. MERCHANDISERS
F
143 143
R R
FS-5.8 E
D
F
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:1
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY
EQUIPMENT PLAN
FS-1.1
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
KITCHEN / SERVERY EQUIPMENT PLAN
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
P2
P2
P2
P3
P3
P3
P3 P3
P3
P3
P3
P4 P5
P4 P5
P4 P5
P4 P5
P4P5 P4P5P4P5
P6
P6
P6
P6
P6
P6
P6
P9
P9
P9 P9
P.C. TO BRANCH TO
AMBIENT CARBONATORS
THRU - WATER FILTERS.
P6
P6
P2P2
P8
P6
P10
P1
P24
P.C. TO CONNECT TO
CUBE ICE MAKER THRU
WATER FILTER.
P.C. TO BRANCH FROM
MIXING VALVE TO WALL
MOUNTED HOSE REEL.
P29 P29
P1
P1 P1
P1 P1
P6
P1
P6
P1
P2
P22 P23
P2
P6
P3
P7
P7
NOTE:
DRAIN LOCATIONS SHOWN ARE TO A DEGREE ARBITRARY, THEREFORE,
SHOULD LOCATIONS CONFLICT W/STRUCTURAL ELEMENTS OR OTHER
UTILITY SYSTEM, SOME MOVEMENT OF THE ROUGH-IN POINT IS POSSIBLE.
ALWAYS MAKE THE DRAIN MORE ACCESSIBLE RATHER THAN OBSCURED
BY EQUIPMENT.
NOTE:
AREA FLOOR DRAINS TO BE LOCATED
AND PROVIDED BY P.C.
P7
/1 FS-2.2
/1 FS-2.2
/1 FS-2.2
P2
P3
P6
P6
P2
P6
P2
P4P5
P2
P3
P6
P2
P3
P3
P9
P9
P9
P2
P7
P4
P5
P6
7 9 10 11 1312
E
H
F
G
D
J
P4
P5
P11 P12
P11 P12
P11 P12
P.C. TO PROVIDE AND INSTALL 3/4" CPCV PIPING BETWEEN
R.O. SYSTEM AND COMBI OVENS. PIPING TO RUN ABOVE
FINISHED CEILING FASTENED SECURELY EN ROUTE.
TUBING TO RUN DOWN INSIDE WALL / CONNECT TO MANIFOLDS.
P13
P14
P15
P16
P17
P18
P19
P19
P20
P22
P21
P23
P23
P2
P2
P2
P2
P25
P26 P26P2
P4P5
P28
P1P1
P4P5
DRAIN FOR FUTURE
BLOWER COIL
P2 P2
P7
P6
P1
P1
P6
FROM R.O.
FROM R.O.
FROM R.O.
P29 P29
P1
P1
P27
P27
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:1
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY PLUMBING
PLAN
FS-1.2
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
KITCHEN / SERVERY PLUMBING PLAN
E2
E5
E6
E10
E10
E14
E15
E14 E15
E16
E17
E17 E17
E17
E17
E17
E17 E17
E17
E17 E17
E17
E17
E17
E17
E17
E17
E17
E17
E17
E18
E18
E19
E20 E21
E22
E1 E4
E35
E35
GENERAL
FREEZER
THAW COOLER
FREEZER
PRODUCE
COOLER
GENERAL
COOLER
COOLER
E1E1
E4
E1
E41
E26
E24
E25
E45
E43
E46E47
E49 E50 E17E46
E52
E53A
E53
E53BE53A
E53B
E53A
E53B
E53DE53CE53AE53C
E51
E5
E54
E56
E60 E61
E62 E62 E63
E4
E59
E58
E1
E40E64 E65
E48
E44
E66
E66G E66AE66DE66C E66H
E66EE66F
E66C
E66E
E66B
E69 E69E70
/1 FS-2.3
/1 FS-2.3
/1 FS-2.3
E19
E17
E17
E17
E35
E35
7 9 10 11 1312
E
H
F
G
D
J
E26 E28
E28
E33 E33
E33 E33
E29
E29
E29
E29
E29
E29
E30
E31
E32
E34
E36
E37
E37
E38
E39
E39
E.C. TO PROVIDE AND BRANCH CAT 5 CABLE
FROM UTILITY CABINET TO CASLINK @ HOOD
E.C. TO BRANCH 120V
FROM UTILITY CABINET
TO EXHAUST HOOD LIGHTS
E40
E17
E53B
E26
E28 E37
CAP FOR
FUTURE USE
CAP FOR
FUTURE USE
E25
E24
E12
E5
E8
NOTE:
REFER TO FS-6.1 thru FS-6.13 FOR
EXHAUST HOOD DOCUMENTS
E85 E85
E86
E87
E17
E17
E42
E88
E27
E27 E27
E27
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:1
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY
ELECTRICAL PLAN
FS-1.3
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
KITCHEN / SERVERY ELECTRICAL PLAN
7 9 10 11 1312
E
H
F
G
D
J
F S
-2 .4
F S
-2 .4
F S
-2 .4
179"
/4
S
S
SODA
SODA
SODA
SODA
DEPRESSION
79 1/2" 43"
138 1/2"
DEPRESSION
129 1/2"
D E
P R
E S
S
IO
N
/2
D E
P R
E S
S
IO
N
/2
6" DIAMETER CONDUIT FOR SODA LINE RUNS,
RUN CONDUIT UNDER SLAB AS INDICATED W/24"
MINIMUM SWEEPING BENDS. CONDUITS MUST BE
WATER TIGHT. CUT OFF @ 10" A.F.F. & CAP OFF.
INSTALLATION & MATERIAL OF CONDUIT TO
MEET ALL LOCAL & STATE CODES.
/4
16" 75"
G.C. TO PROVIDE BLOCK OUT FOR
STANDARD FLOOR TROUGH.
SEE DETAIL SHEET FS-4.3 FOR TYPE.
77 1/2" 36"
/2
/2
G.C. TO PROVIDE BLOCK OUT FOR
ANTI-SPILL FLOOR TROUGH.
SEE DETAIL SHEET FS-4.3 FOR TYPE.
G.C. TO PROVIDE 5" DEEP
DEPRESSION BELOW FINISHED
FLOOR FOR WALK-IN COOLER/
FREEZER ASSEMBLY. SEE
DETAIL SHEET FS-4.3
"8
/2
118 1/2" 18" 120 1/2"
9" 9"
/2
/2
118 1/2" 18" 120 1/2"
G.C. TO PROVIDE 5"
DEEP DEPRESSION
BELOW FINISHED
FLOOR FOR WALK-IN
COOLER/ FREEZER
ASSEMBLY. SEE
DETAIL SHEET FS-4.3
SODA CONDUIT LINES RUNNING
TO SERVERY. REFER TO FS-2.4
18" 60"
G.C. TO PROVIDE BLOCK OUT FOR
STANDARD FLOOR TROUGH.
SEE DETAIL SHEET FS-4.3 FOR TYPE
84" 18" 54 1/2" 84"
G.C. TO PROVIDE BLOCK OUT FOR
STANDARD FLOOR TROUGH.
SEE DETAIL SHEET FS-4.3 FOR TYPE.
/2
D E
P R
E S
S
IO
N
/2
15" 136"
G.C. TO PROVIDE 5" DEEP
DEPRESSION BELOW FINISHED
FLOOR FOR WALK-IN COOLER/
FREEZER ASSEMBLY. SEE
DETAIL SHEET FS-4.3
/2
D E
P R
E S
S
IO
N
DEPRESSION
257"
/4
236 1/2"
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:2
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY SLAB
PENETRATION &
SODA CONDUIT
PLAN
FS-1.4
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
KITCHEN / SERVERY SLAB BLOCK OUT & SODA CONDUIT PLAN
H
F
G
D
J
V01
V01
V01
V01
V01
V01
V01
V01
V02
V02
V02
V02
V03
V03
V03
V03
V04
V04
V04
V04
V05
V05
V05
V05
V06 V06 V06 V06 V07 V07
/1 FS-2.5
/1 FS-2.5
/1 FS-2.5
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR EYE WASH
WALL BACKING
FOR (LOW WALL)
SMART WALL
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR (LOW WALL)
SMART WALL
WALL BACKING FOR
REVERSE OSMOSIS
SYSTEM
WALL BACKING
FOR (LOW WALL)
SMART WALL
L O
W W
A L
L
A
.F .F
F U
L
R
IS
E R
WALL BACKING FOR
WATER FILTER
L O
W W
A L
L
A
.F .F
F U
E R
L O
W W
A L
L
A
.F .F
F U
E R
WALL BACKING
FOR (LOW WALL)
SMART WALL
WALL BACKING
FOR HAND SINK
L O
W W
A L
L
A
.F .F
F U
E R
WALL BACKING
FOR (LOW WALL)
SMART WALL
WALL BACKING
FOR (LOW WALL)
SMART WALL
G.C. TO PROVIDE FULL HEIGHT
NON COMBUSTIBLE WALL
HVAC DISTRIBUTION NOTE:
DO NOT INSTALL HIGH VELOCITY DIFFUSERS
WITHIN TEN (10) FEET OF EXHAUST HOOD.
PERFORATED DIFFUSERS ARE RECOMMENDED.
WAREWASHING AREA WALLS TO BE FRP, CERAMIC TILED,
OR SEALED W/EPOXY PAINT & SHALL BE SMOOTH, NON-
ABSORBENT, WASHABLE & LIGHT COLORED. FLOOR SURFACES
& 6" COVED BASE TO BE A NON-SLIP QUARRY TILE OR NON-SLIP
SEAMLESS FLOORING AND BE PITCHED TO AREA FLOOR DRAINS.
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR EYE WASH
WALL BACKING
FOR (TALL WALL)
SMART WALL
WALL BACKING FOR
WALL MOUNTED
HOSE REEL
WALL BACKING FOR
(TALL WALL) SMART WALL
WALL BACKING FOR
S/S WALL SHELF
WALL BACKING
FOR WATER
FILTERS
NOTE:
G.C. TO PROVIDE AND
INSTALL WALL BACKING.
NOTE:
G.C. TO PROVIDE AND
INSTALL WALL BACKING.
L O
W W
A L
L
A
.F .F
/2
F U
E R
L O
W W
A L
L
A
.F .F
F U
E R
WALL BACKING FOR
MOP BROOM RACK
G.C. TO PROVIDE AND INSTALL ANGLE IRON TO
UNDERSIDE OF ABOVE BUILDING STRUCTURE
TO SUPPORT EXHAUST VENTILATOR.
COORDINATE INSTALLATION W/ K.E.C.
L O
W W
A L
L
A
.F .F
F U
E R
L O
W W
A L
L
A
.F .F
F U
E R
WALL BACKING FOR HOOD
UTILITY CABINETS
NOTE: STORAGE AREA
TO BE AIR COOLED &
NOT EXCEED 80 F.
NOTE: STORAGE AREA
TO BE AIR COOLED &
NOT EXCEED 80 F.
CABINET ROUGH-IN
REQUIREMENT.
20-1/4" H - 14 1/4" W.- 5" D. @ 48" A.F.F.
G.C. TO PROVIDE WALL SLEEVE
FOR COIL DRAIN LINE. COORDINATE
SIZE AND LOCATION W/ K.E.C.
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR HAND SINK
WALL BACKING FOR
S/S WALL SHELF
G.C. TO PROVIDE AND INSTALL ANGLE IRON TO
UNDERSIDE OF ABOVE BUILDING STRUCTURE
TO SUPPORT EXHAUST VENTILATOR.
COORDINATE INSTALLATION W/ K.E.C.
G.C. TO PROVIDE FULL HEIGHT
NON COMBUSTIBLE WALL
G.C. TO PROVIDE WALL SLEEVE
FOR COIL DRAIN LINE. COORDINATE
SIZE AND LOCATION W/ K.E.C.
NOTE:
REFER TO FS-6.1 thru FS-6.13 FOR
EXHAUST HOOD DOCUMENTS
NOTE:
REFER TO FS-4.1 FOR
VENTILATION SCHEDULE
WALL BACKING
FOR COMBI OVEN
MANIFOLD
WALL BACKING
FOR COMBI OVEN
MANIFOLD
WALL BACKING
FOR SLAT WALL
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:2
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY SPECIAL
CONDITIONS PLAN
FS-1.5
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
KITCHEN / SERVERY SPECIAL CONDITIONS PLAN
Peter Heimbach Rectangle
Peter Heimbach Line
Peter Heimbach Line
H
F
G
D
J
MERCHANDISE
COOLER
GENERAL
FREEZER THAW COOLER
FREEZER
PRODUCE
COOLER
GENERAL
COOLER
COOLER
R-13
R-23
R-33
R-33
R-73
MERCHANDISE
FREEZER
R-164
R-172
K.E.C. TO RUN REFRIGERATION
LINES TO CONDENSING UNITS
LOCATED ON ROOF. (SEE FS-3.2)
LINES TO RUN ABOVE FINISHED
CEILING AND TO BE FASTENED
SECURELY TO STRUCTURE ABOVE.
COORDINATE LINE PATH WITH G.C.
K.E.C. TO RUN REFRIGERATION LINES TO CONDENSING
UNITS LOCATED ON ROOF. (SEE FS-3.2) LINES TO RUN
ABOVE FINISHED CEILING AND TO BE FASTENED SECURELY
TO STRUCTURE ABOVE. COORDINATE LINE PATH WITH G.C.
FUTURE
R-37
R-27
REMOTE CONDENSING UNITS LOCATED
ON ROOF DIRECTLY ABOVE THIS AREA
NOTE:
SEE REFRIGERATION CONNECTION
SCHEDULE. SHEET FS-4.1
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:2
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
KITCHEN AND
SERVERY
REFRIGERATION
PLAN
FS-1.6
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
KITCHEN / SERVERY REFRIGERATION PLAN
FS-5.7
A
FS-5.7
C
FS-5.8
/1 FS-1.1
/1 FS-1.1
156189
17 17
17 17
H R
ENTREE COLD
DESSERT
CASHIER
CASHIER
CASHIER
REF. DISPLAY
REF. DISPLAY
H R
197 197 197 199 194 186 187
197 197 197 199 194 186 187
17 17
214 215
221 221
ENTREE COLD
DESSERT
198 198 198
211 212
211 212
BEVERAGE
210210
210210
FS-5.8
B
R
R
14 15 16 17 18
E
H
F
G
J
217217
228 228 228 228 228 228
221 221
198 198
227 227
/1 FS-1.1
NOTE:
REFER TO FS-7.1 / FS-7.2 /
AND FS-7.3 FOR WAREWASH
EQUIPMENT DETAILS.
WAREWASH
FS-5.6
C
B
A
C
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:2
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SERVERY AND
WAREWASH
EQUIPMENT PLAN
FS-2.1
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
SERVERY / WAREWASH EQUIPMENT PLAN
P4
P5
P4
P5
P29
P6P6 P1
P29P29
P29
P1
P9
P9
P9
P31
P1
P38
P34
P34
P2
P35
P37
P.C. TO BRANCH TO DISH
MACHINE THRU-WATER
SOFTENER
P36
P1 P1
P6
P30
P30
P30
P.C. TO BRANCH TO
ICE MAKER THRU-
WATER FILTER
P.C. TO BRANCH TO ICED TEA
BREWERS THRU-WATER FILTER
P.C. TO BRANCH TO
COFFEE BREWER
THRU-WATER FILTER
NOTE:
DRAIN LOCATIONS SHOWN ARE TO A DEGREE ARBITRARY, THEREFORE,
SHOULD LOCATIONS CONFLICT W/STRUCTURAL ELEMENTS OR OTHER
UTILITY SYSTEM, SOME MOVEMENT OF THE ROUGH-IN POINT IS POSSIBLE.
ALWAYS MAKE THE DRAIN MORE ACCESSIBLE RATHER THAN OBSCURED
BY EQUIPMENT.
NOTE:
AREA FLOOR DRAINS TO BE LOCATED
AND PROVIDED BY P.C.
/1 FS-1.2
/1 FS-1.2
/1 FS-1.2
14 15 16 17 18
E
H
F
G
J
P1P1P1P1
P29
P6P6 P1
P29P29
P29
P1P1P1P1
P1
P30
P30
P30
P.C. TO BRANCH TO
ICE MAKER THRU-
WATER FILTER
P.C. TO BRANCH TO ICED TEA
BREWERS THRU-WATER FILTER
P.C. TO BRANCH TO
COFFEE BREWER
THRU-WATER FILTER
P4 P5
P4 P5
P4 P5
P34
P34
P35
P6
P2
P2
P2
P2
P2
P2
P6
P6
P2
P32
P32
P33
P33
P2
P.C. TO BRANCH FROM
TROUGHVEYOR TO
TROUGH NOZZLES..
P.C. TO BRANCH FROM
TROUGHVEYOR TO
TROUGH NOZZLES.
P1
P1
P1
P6
P6
P6
P39
P39
NOTE:
REFER TO FS-7.1 / FS-7.2 /
AND FS-7.3 FOR WAREWASH
EQUIPMENT DETAILS.
P1 P1
P1
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:3
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SERVERY AND
WAREWASH
PLUMBING PLAN
FS-2.2
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
SERVERY / WAREWASH PLUMBING PLAN
E73
E75
E71D
E71D
E71D E71FE71C
E71A
E71G
E71H
E71E
E71E E71E E71B
E17 E46
E68G
E68H
E68A
E68BE68F
E68CE68E
E68D
E68D
E68D
E68E
E68E
E67E17 E46
E71
E68
E74
E76
E73
E75 E74
E76
E73
E75 E74
E76
E72
E72
E77 E78 E79
E79
E77 E79
E79
E78
E82
E82
E84
/1 FS-1.3
/1 FS-1.3
/1 FS-1.3
14 15 16 17 18
E
H
F
G
J
E67
E83
E83
E81
E81
E17
E17
E71J
E68J
E80
E80
NOTE:
REFER TO FS-7.1 / FS-7.2 /
AND FS-7.3 FOR WAREWASH
EQUIPMENT DETAILS.
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:3
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SERVERY AND
WAREWASH
ELECTRICAL PLAN
FS-2.3
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I F.J.F
1/13/25
21118
1/4" = 1'-0"
SERVERY / WAREWASH ELECTRICAL PLAN
14 15 16 17 18
H
F
G
J
F S
-1 .4
F S
-1 .4
F S
-1 .4
46"
46"
S
S
SODA
SODA
SODA
SODA
6" DIAMETER CONDUIT FOR SODA LINE RUNS,
RUN CONDUIT UNDER SLAB AS INDICATED W/24"
MINIMUM SWEEPING BENDS. CONDUITS MUST BE
WATER TIGHT. CUT OFF @ 10" A.F.F. & CAP OFF.
INSTALLATION & MATERIAL OF CONDUIT TO
MEET ALL LOCAL & STATE CODES.
SODA CONDUIT LINES RUNNING
FROM KITCHEN. REFER TO FS-1.4
84" 72"
84" 72"
/4
30" 18"
G.C. TO PROVIDE BLOCK OUT FOR
STANDARD FLOOR TROUGH.
SEE DETAIL SHEET FS-4.3 FOR TYPE.
/4
/4
/4
/4
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:3
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SERVERY AND
WAREWASH SLAB
PENETRATION &
SODA CONDUIT
PLAN
FS-2.4
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
SERVERY / WAREWASH SLAB BLOCK OUT & SODA CONDUIT PLAN
14 15 16 17 18
H
F
G
J
V09 V08
F S
-1 .5
F S
-1 .5
F S
-1 .5
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR HAND SINK
WALL BACKING
FOR EYE WASH
WAREWASHING AREA WALLS TO BE FRP,
CERAMIC TILED, OR SEALED W/EPOXY
PAINT & SHALL BE SMOOTH, NON-
ABSORBENT, WASHABLE & LIGHT
COLORED. FLOOR SURFACES & 6"
COVED BASE TO BE A NON-SLIP
QUARRY TILE OR NON-SLIP SEAMLESS
FLOORING AND BE PITCHED TO AREA
FLOOR DRAINS.
WALL BACKING FOR
MOP / STORAGE CABINET
SILL @ 34" A.F.F.
HEADER @ 63 1/2" A.F.F.
SILL @ 34" A.F.F.
HEADER @ 63 1/2" A.F.F.
NOTE:
G.C. TO PROVIDE AND INSTALL
WALL BACKING MATERIAL.
WINDOW OPENING
120" 43 1/2"
WINDOW OPENING
120" 43 1/2"
NOTE:
REFER TO FS-7.1 / FS-7.2 /
AND FS-7.3 FOR WAREWASH
EQUIPMENT DETAILS.
NOTE:
REFER TO FS-4.1 FOR
VENTILATION SCHEDULE
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:4
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
SERVERY AND
WAREWASH
SPECIAL
CONDITIONS PLAN
FS-2.5
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
SERVERY / WAREWASH SPECIAL CONDITIONS PLAN
76 9 10
H
J
6.1
GC PCFGF TC CMC MF
1534 38 1528 1524 15 14 15 74 15173 15 165 15
FOR FUTURE
COOLER
NOTE:
SEE SCHEDULE OF EQUIPMENT FS-0.2
76 9 10
H
J
6.1
TCGF FGC PC CMFMC
E57 E55 E23E3E7 E9 E13E11
NOTE:
SEE ELECTRICAL SCHEDULE FS-4.1
FOR FUTURE COOLER
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:4
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
ROOF REMOTE
CONDENSING UNIT
EQUIPMENT &
ELECTRICAL PLAN
FS-3.1
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
ROOF REMOTE CONDENSING UNIT EQUIPMENT PLAN
1/4" = 1'-0"
ROOF REMOTE CONDENSING UNIT ELECTRICAL PLAN
76 9 10
H
J
6.1
(TYPICAL) K.E.C. TO RUN REFRIGERATION
LINES BETWEEN CONDENSING UNIRTS AND
BLOWER COILS LOCATED IN THE KITCHEN.
REFER TO SHEET FS-1.6
NOTE:
K.E.C. TO RUN REFRIGERATION LINES ABOVE FINISHED
CEILING EN ROUTE TO KITCHEN. LINES TO BE FASTENED
SECURELY TO STRUCTURE ABOVE CEILING. COORDINATE
LINE PATH W/ G.C.
CAP FOR
FUTURE USE
76 9 10
H
J
6.1
FUTURE COOLER
CONDENSING UNIT
(TYPICAL) G.C. TO PROVIDE AND
INSTALL STAND FOR CONDENSING
UNIT. STAND TO MEET ALL LOCAL
AND STATE CODES
292" 40" 40" 40" 25 1/2" 25 1/2" 40" 40"
NOTE:
DIMENSIONS INDICATING LOCATIONS OF
CONDENSING UNITS SATISFY MANUFACTURES
CLEARANCE RECOMMENDATIONS FOR
REQUIRED AIR FLOW AND MAINTENANCE.
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:4
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
ROOF REMOTE
CONDENSING UNIT
REFRIGERATION &
SPECIAL
CONDITIONS PLAN
FS-3.2
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
1/4" = 1'-0"
ROOF REMOTE CONDENSING UNIT REFRIGERATION PLAN
1/4" = 1'-0"
ROOF REMOTE CONDENSING UNIT SPECIAL CONDITIONS PLAN
2'
4' 6'
3"
6" 1'
2'
1' 2'
3'
6" 1'
2' 4'
1'
2' 4'
8'
4' 8'
2'
4' 8'
8'
4'
8'
8'
Sheet Number
Drawing Title
Drawn By Checked By
Original Issue Date
Project No
Issue Description
G R
A P
H
IC
S C
A L
E : 1
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /1
'-0
G R
A P
H
IC
S C
A L
E : 3
/3
'-0
G
R A
P H
IC
S
C A
L E
: 1 /8
'-0
G
R A
P H
IC
S
C A
L E
: 3 /1
'-0
G R
A P
H
IC
S C
A L
E : 1
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
/2
'-0
G R
A P
H
IC
S C
A L
E : 3
/4
'-0
G R
A P
H
IC
S C
A L
E : 1
'-0
G
R A
P H
IC
S
C A
L E
: 3 /8
'-0
Description Date
DOCUMENT CHANGES
NOT VALID FOR
REGULATORY
APPROVAL,
PERMITTING OR
CONSTRUCTION IF
ARCHITECT'S SEAL
IS NOT PRESENT
Seals
S B
C
9/
7-
-2
1-
THIS DRAWING INDICATES THE GENERAL EXTENT OF THE WORK AND IS NOT
INTENDED TO INDICATE OR DESCRIBE ANY AND ALL WORK REQUIRED FOR THE
FULL PERFORMANCE AND COMPLETION OF THE REQUIREMENTS OF THE
CONTRACT DOCUMENTS.
3807 Charlotte Avenue, Nashville TN. 37209 ph: 615.321.5591 fax: 615.321.5689 www.inman-inc.com
CONSTRUCTION DOCUMENTS
1/
/2
5:
:5
P
M A ut od es k
D oc s:
//1
M ul ti- A ge nc y La w E nf or ce m en t T ra in in g
A ca de m y
M A
LE
T
A
M A
LE
T
A _0
H
O U
S
IN
G A
N D
D
IN
IN
G
_F S
_I N
M A
N _2
2.
rv t
MEP SCHEDULES
FS-4.1
M A
L E
T A
H O
U S
IN
G
, D
IN
IN
G
K
E N
N E
L
C o ck ri ll B en d
C ir cl e
B
C , N as h vi lle
, T N
W.W.I. F.J.F.
1/13/25
21118
PLUMBING CONNECTIONS SCHEDULE
NUMBER SIZE DESCRIPTION LOCATION A.F.F. SERVICE TO ITEM NO. REMARKS
P1 1" INDIRECT WASTE - - AIR GAP DRAIN - -
P2 2" INDIRECT WASTE - - AIR GAP DRAIN - -
P3 1/2" HOT & COLD WATER WALL 18" FAUCET - P.C. TO BRANCH TO CONNECTION AS REQUIRED
P4 1/2" HOT & COLD WATER WALL 20" HAND SINK / EYE WASH STATION 55 / 82 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P5 1-1/2" DIRECT WASTE WALL 22" HAND SINK / EYE WASH STATION 55 / 82 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P6 - FLOOR SINK - - - - -
P7 - FUNNEL FLOOR DRAIN - - - - -
P8 1/2" HOT & COLD WATER WALL 18" MOP SINK / CAN WASH 1 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P9 4" DIRECT WASTE FLOOR - FLOOR TROUGH 6/90/91/115/138/216 -
P10 1/2" COLD WATER WALL 76" REVERSE OSMOSIS SYSTEM 45 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P11 3/4" COLD WATER (2) CONNECTIONS WALL 18" / 36" COMBI OVEN 86 P.C. TO BRANCH TO CONNECTION AS REQUIRED / CAP ONE FOR FUTURE USE
P12 3/4" GAS @ 98,000 BTU EACH (2) CONNECTIONS WALL 18" / 36" COMBI OVEN 86 P.C. TO BRANCH TO CONNECTION AS REQUIRED / CAP ONE FOR FUTURE USE
P13 1/2" GAS @ 72,000 BTU WALL 18" 20 GAL. TILTING KETTLE 87 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P14 1/2" HOT & COLD WATER WALL 18" 20 GAL. TILTING KETTLE 87 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P15 1/2" GAS @ 100,000 BTU WALL 18" 40 GAL. TILTING KETTLE 88 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P16 1/2" HOT & COLD WATER WALL 18" 40 GAL. TILT KETTLE 88 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P17 1/2" GAS @ 144,000 BTU WALL 18" 40 GAL. TILTING BRAISING PAN 92 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P18 1/2" HOT & COLD WATER WALL 18" 40 GAL. TILTING BRAISING PAN 92 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P19 1" GAS @ 60,000 BTU EACH (2) CONNECTIONS WALL 18" / 36" DOUBLE CONVECTION OVEN 95 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P20 1" GAS @ 247,000 BTU WALL 36" 6 BURNER RANGE W/ CONVECTION OVEN 96 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P21 1/2" COLD WATER WALL 52" POT FILLER 97 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P22 3/4" GAS @ BTU 108,000 WALL 18" COUNTER TOP CHAR BROILER 101 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P23 3/4" GAS @ BTU 84,000 WALL 18" COUNTER TOP GRIDDLE 103 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P24 3/4" COLD WATER WALL 76" WATER FILTRATION ASSEMBLY 113 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P25 1/2" HOT & COLD WATER WALL 72" WALL MOUNTED HOSE W/ MIXING CABINET 136 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P26 3/4" HOT & COLD WATER WALL 18" FAUCET - P.C. TO BRANCH TO CONNECTION AS REQUIRED
P27 1/2" COLD WATER WALL 92" WATER FILTRATION SYSTEM 41 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P28 1/2" COLD WATER WALL 18" PROOFER OVEN 153 P.C. TO BRANCH TO CONNECTION AS REQUIRED
P29 1/2" COLD WATER FLOOR STUB (AUTO FILL) 187 / 198 / 159 P.C.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .