Attachment B - PWS_upfits.pdf

UNCLASSIFIED

Attachment B

HM047626R0029

03/27/2026

National Geospatial-Intelligence Agency (NGA)

Office of Force Protection

Performance Work Statement

The NGA Office of Force Protection East (Springfield, VA) has a requirement to upfit two (2)

2025 Ford Explorer Interceptor for their Operations unit (VIN 1FM5K8AB3SGC66617 & VIN

1FM5K8AB1SGC58452). The vehicles shall be upfit with the following items:

• NGA Police Emblem on both the passenger and driver side of vehicle, rear hatch area, and roof numbering. Vendor shall use Signs at Work for Emblem.

• Headlight taillight flasher (Will need integrated lights in the headlights and taillights).

Installed with plug-in connectors, single flash pattern, high beam override, built in shutdown protection against loss of ground, short circuit and under voltage, durable and non-corrosive

ABS plastic housing.

• Two outliner perimeter red and blue lights mounted under driver side and passenger side doors Mounted above side steps. Allows installation as a running board light, push bumper light, tailgate and distributes a bright output to increase vehicle visibility, aluminum housing and sealed light, heads that prevent corrosion and water ingress. Available in amber, blue, red, and white, split and solid cover combinations. 10 flash patterns including dim and steady burn override, powder coat aluminum frame, IP67 rated for dust and water resistant, phase 1 and phase 2 syncing capabilities, 12VDC, temperature range -40 degrees Fahrenheit to 170 degrees

Fahrenheit, 55” cable enclosed in a jacket, RoHS IP67 rated, 5-year warranty

• Speaker Kit. Compact, low profile design that works with all Code 3 sirens, designed to fit easily behind front grill, high efficiency (2) SOW speakers, two 180 AWG Wire connection, aluminum housing

• Excel siren with microphone

• Wide body console

• Dual cup holder

• Upper arm rest structure

• Faceplate for Harris radio

• Installation of customer supplied Police radio equipment.

• Black Rubber Floor Mats

• Supervisor flex 2-piece multi-color 6 modules order is RW/BW/RW - BW/RW/BW

• Half Cage for Prisoner Transport

• Light synchronizer system

• Inventory management system with pull out drawers in trunk area that does not prohibit accessing spare tire area.

• 20% Ceramic Window Tint driver and passenger widows to match rear, as well as, 35% sun visor tint for the front windshield

• Install price including parts: wire, loom, heat shrink, fuses, connectors, all auxiliary wiring to be protected through a power fuse module located under the hood. Fuse bus is energized with a solenoid that is energized with “KEY ON”. All wire, switches, relays, and power fuse modules must be properly secured and mounted as per industry standards. All leads from this main power point are to be fused using ATO/ATC bus 12 circuit’s 30A/100A Max fuse block with screw terminals for securing wires. All ring terminals and other circuit connections to be mechanically crimped using a ratcheting crimper to ensure proper tension and 3:1 adhesive lined black heat shrink to cover crimp to ensure added protection to connections. All circuits must have proper wiring gauge and circuit protection as recommended by equipment manufacturer.