Attachment A - SOOs.pdf

Attachment A for Solicitation SPE601-26-R-0304

STATEMENT OF OBJECTIVES (SOO)

The following is a summary of Statements of Objective associated with this solicitation:

SOO Sioux City ANG - CDSSIOUXCI

SOO Tinker AFB - CDSTINKER2

SOO Peterson SFB - CDSPETERSO

SOO Montana ANG - CDSMONTANA

SOO St. Paul ANG - CDSSTPAULA

SOO Tinker AFB - CDSBLD3221

SOO Vance AFB - CDSVANCEAF

SOO White Sands Missile Range - CDSARMWSMR

SOO Tinker AFB - CDSBLD9001

SOO Cannon AFB - CDSCANNONA

SOO Altus AFB - CDSALTUSAF

SOO Buckley ANG - CDSBUCKLEY

SOO Little Rock AFB - CDSLITTLER

SOO Tinker AFB 72 LRS - CDSTINKERA

SOO Kirtland - CDSKIRTLAN

SOO Tinker React Lab - CDSTINKLAB

SOO Tinker AFB - CDSBLD3001

SOO Tulsa ANG - CDSTULSAAN

NOTE: Files for each Statement of Objective (SOO) are attached to this document

STATEMENT OF OBJECTIVES 3 OCT 2025

TSW ID: CDSALTUSAF

DODAAC: FP8028 PPN: 9.1C

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government- owned tanks at Altus AFB, OK.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, or the most current version.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Deliveries shall be made from 0600-1800 hours, Monday-Friday, excluding federal holidays.

Product deliveries shall be made to the following address:

97/LRS/LGRF

(Fuels Service Center Facility 354) 717 S. 1ST Street Altus AFB, OK 73523-5110

GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location # of Tanks/ Capacity-Gallons MAWP* Facility 354 2 – 6,000 GL 50 PSIG *Maximum Allowable Working Pressure

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin. Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

EXPEDITED/EMERGENCY DELIVERY: Emergency deliveries shall be within three

(3) calendar days of request unless otherwise determined by the DLA Contracting Officer. After emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with the customer.

DETENTION FEE: The Contractor shall be paid for detention beyond free time for delays caused by the Government. Free time will commence at the time the Contractor’s transport truck or truck and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released.

For items involving multiple drops, time between drops will not be included in the free time.

FILL LINE RESTRICTION ORIFICE: ☒ FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for Implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location.

Driver must call 580-481-6641 Ten (10) minutes prior to arrival.

STATEMENT OF OBJECTIVES 3 OCT 2025

TSW ID: CDSALTUSAF DODAAC: FP8028 PPN: 9.1C

STATEMENT OF OBJECTIVES

3 OCT 2025

BUCKLEY ANG CO

TSW ID: CDSBUCKLEY

DODAAC: FP8100 PPN: 9.1C

SCOPE: The Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b.

destination into Government-owned tanks at Buckley ANG, Aurora, CO.

PRODUCT: Aviator’s Breathing Oxygen (ABO), Type II, NSN ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, or the most current version.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY:

Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

DELIVERY ADDRESS: Deliveries shall be made from 0700-1400 hours, Mountain Standard Time (MST), Tuesday-Friday, excluding federal holidays. Product deliveries shall be made to the following address:

140 LRS/LGRF

Bulk Fuel Storage Area, BLDG 1053 Aurora, CO 80011-9514

DESCRIPTION OF GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

Location #of Tanks/Capacity-Gallons MAWP*

BLDG 1053 One (1) – 3000 GL 50 PSIG

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin. Quantity determination and acceptance shall be at destination. The contractor shall obtain a customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

EXPEDITED / EMERGENCY DELIVERY: Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer. After an emergency delivery order is placed, the contractor shall coordinate delivery time and acceptance of emergency deliveries with the customer.

DETENTION FEE: The Contractor shall be paid for detention beyond free time for delays caused by the Government. Free time will commence at the time the Contractor’s transport truck or truck and trailer arrive at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

FILL LINE RESTRICTION ORIFICE: FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for Implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-

59. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth.

Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while at each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location.

STATEMENT OF OBJECTIVES, 30 SEP 2025

Cannon AFB

TSW CDSCANNONA

DODAAC FP8093 PPN: 9.1C

SCOPE: The Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination to Cannon AFB, NM.

PRODUCT SPECIFICATIONS: Aviator’s Breathing Oxygen (ABO), Type II, NSN 6830- 01-644-2463, shall meet the requirements of MIL-PRF-27210J or the most current version.

PRODUCT DELIVERY: For routine deliveries, the product shall be delivered within 7 days after receipt of an order from the appointed Scheduling Officer.

Deliveries shall be made from 0700-1500 hours, Monday-Friday, excluding federal holidays.

27 SOLRS/LGRF Cannon AFB 114 N Perimeter Rd Bldg 218 Clovis, New Mexico 88103

Description of Government-Owned Tanks: ABO shall be delivered into Government owned

Location # of Tanks/ Capacity-Gallons MAWP* Bldg 218 (Future Install) 1 - 3000 gallons 25 psig

Description of Contractor-Provided Tanks: ABO shall be delivered into Contractor owned

Bldg 218 2 - 2000 gallons 38 psig

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin.

Quantity determination and acceptance shall be at destination. The contractor shall obtain the customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

EXPEDITED/EMERGENCY DELIVERY: Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer.

After an emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure During Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. A subsequent inspection by the Contractor representative may be performed to validate compliance. NOTE: Over-pressure protection devices shall not be installed on Government-owned storage tanks without prior coordination with DLA Energy-FEM and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

Contractor’s transport truck or truck and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

TANK USAGE FEE: Contractor shall install their Contractor provided tanks on existing cement pads, within the existing system footprints, no later than 30 calendar days from start of contract performance. The Contractor shall also perform all inspections and maintenance of Contractor provided tanks to assure systems provide safe and uninterrupted support. Contractor provided tanks may be chilled through initial deliveries, but initial deliveries into Contractor provided tanks shall not qualify as a “Hot Fill” service. The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment, or to retain the current equipment.

The Contractor may be required to provide a temporary system during change out of existing system or tanks to eliminate any delay in supply of product.

INSTALLATION OF EQUIPMENT: Contractor shall install their Contractor provided equipment within the existing system footprints, no later than 30 calendar days from start of contract performance. The Contractor shall also perform all inspections and maintenance of Contractor provided equipment to assure systems provide safe and uninterrupted support. The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment, or to retain the current equipment.

REMOVAL OF EQUIPMENT: The Contractor provided tanks/equipment shall be removed by the Contractor within 30 calendar days after contract termination. The Contractor will coordinate with the follow-on supplier to effect removal of current equipment and installation of new equipment.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel to provide social security numbers and be subjected to background checks. A driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility.

STATEMENT OF OBJECTIVES, 30 SEP 2025

TSW CDSCANNONA DODAAC FP8093 PPN: 9.1C

STATEMENT OF OBJECTIVES, 30 SEP 2025

377th LGRF Kirtland AFB

TSW CDSKIRTLAN

DODAAC FP8047 PPN: 9.1C

SCOPE: The Defense Logistics Agency Energy (DLA Energy), as the Department of related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government tanks at Kirtland AFB, NM.

PRODUCT SPECIFICATIONS: Aviator’s Breathing Oxygen (ABO), Type II, NSN 6830- 01-644-2463, shall meet the requirements of Commercial Item Description MIL-PRF- 27210J or most current version.

PRODUCT DELIVERY: For routine deliveries, the product shall be delivered within 7 days after receipt of an order from the appointed Scheduling Officer.

Deliveries shall be made from 0600-1400 hours, Monday-Friday, excluding federal holidays.

377th LGRF 3300 Lowery Ave, SE BLDG 255 Kirtland AFB NM 87117

Government-Owned Tanks: ABO shall be delivered into Government Tanks

Bldg 255 Bldg 255

1 – 3000 gallons 1 – 3000 gallons

60 psig 60 psig

Quantity determination and acceptance shall be at destination. The contractor shall obtain the customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF

After an emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

protection is required to comply with CGA P-59, Prevention of Over-Pressure During Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. A subsequent inspection by the Contractor representative may be performed to validate compliance. NOTE: Over-pressure protection devices shall not be installed on

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

Contractor’s transport truck or truck and trailer arrives at the delivery destination driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location.

STATEMENT OF OBJECTIVES, 30 SEP 2025

TSW CDSKIRTLAN DODAAC FP8047 PPN: 9.1C

STATEMENT OF OBJECTIVES, 08 Apr 25 Little Rock AFB, AR

TSW ID: CDSLITTLER

DODAAC: FP8109 PPN: 9.1c related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at Little Rock AFB, AR.

PRODUCT: ABO (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, or the most current version.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1400 hours, Monday-Friday, excluding federal

19 LRS/LGRF

CMSGT Williams Drive, Bldg 298 Little Rock AFB, AR 72099-4958 accessible.

Location Tank(s) Capacity-Gallons MAWP

Bldg 298 2 – 6,000 GL 50 psig

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin. Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

calendar days of request unless otherwise determined with the DLA Contracting Officer. After an emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

protection is required to comply with CGA P-59, Prevention of Over-Pressure During Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. A subsequent inspection by the Contractor representative may be performed to validate compliance. NOTE: Over-pressure protection devices shall not be installed on cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes prior to pushing liquid into the tank.

Contractor’s transport truck or truck and trailer arrives at the delivery destination driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the

STATEMENT OF OBJECTIVES, 7 OCT 2025

Montana Air National Guard

TSW ID: CDSMONTANA

DODAAC: FP8114 PPN: 9.1C

SCOPE: Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government- owned tanks at Montana ANG, MT.

specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Product shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

Deliveries shall be made from 0700-1430 hours, Monday-Friday, excluding federal holidays.

2800 Airport Avenue B Bldg19 Great Fall IAP, MT 59404

BLDG 19 1-3,000 GL 30 psig

Quantity determination and acceptance shall be at destination. Contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

FILL LINE RESTRICTION ORIFICE: FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for Implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. NOTE:

Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

EXPEDITED/EMERGENCY DELIVERY: Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer. After emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

DETENTION FEE: The Contractor shall be paid for detention beyond free time for delays caused by the Government. Free time will commence at the time the Contractor’s transport truck or truck and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location.

STATEMENT OF OBJECTIVES

3 OCT 2025

PETERSON SFB, CO

TSW ID: CDSPETERSO

DODAAC: FP8178 PPN: 9.1C

SCOPE: The Defense Logistics Agency Energy (DLA Energy), as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b.

destination into Government-owned tanks at Peterson SFB, CO.

PRODUCT: Aviator’s Breathing Oxygen (ABO), Type II, (NSN 6830-01-644-2463) shall meet the requirements of Type II of specification MIL-PRF-27210J, or the most current version.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to Wide Area Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

PRODUCT DELIVERY: Routine product deliveries shall be delivered within 7 calendar days after receipt of an order from the appointed Delivery Scheduler.

DELIVERY ADDRESS: Deliveries shall be made from 0700-1430 hours, Mountain Standard Time (MST), Monday-Friday, excluding federal holidays. Product deliveries shall be made to the following address:

21 LRS/LGRF

667 West Ent Avenue, BLDG 667 Peterson SFB, CO 80914-2332

DESCRIPTION OF GOVERNMENT-OWNED ABO TANKS: ABO shall be delivered into the following Government-owned storage vessel listed below. The storage vessels will be trailer accessible.

METHOD OF MEASUREMENT: Method of measurement shall be by truck mounted calibrated flow meter.

INSPECTION AND ACCEPTANCE: Inspection for quality shall be performed at origin. Quantity determination and acceptance shall be at destination. The contractor shall obtain a customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

Location # of Tanks/Capacity - Gallons MAWP* BLDG 667 Two (2) - 400 GL EA 50 PSIG

EXPEDITED / EMERGENCY DELIVERY: Emergency deliveries shall be within three (3) calendar days of request unless otherwise determined with the DLA Contracting Officer. After an emergency delivery order is placed, the contractor shall coordinate delivery time and acceptance of emergency deliveries with the customer.

DETENTION FEE: The Contractor shall be paid for detention beyond free time for delays caused by the Government. Free time will commence at the time the Contractor’s transport truck or truck and trailer arrive at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for Implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59.

NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

SECURITY REQUIREMENTS: Delivery personnel shall be U.S. citizens. In addition, delivery personnel must possess a state or federally issued photo ID that displays the driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel to be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while at each facility. Security Forces will contact the POL shop upon the driver’s arrival and the driver will be escorted to the delivery location. Once the driver arrives at the gate, the driver must call (719) 556-4423 so the customer can send a person to meet the delivery driver at BLDG 667 to unlock the gate and off-load the ABO.

STATEMENT OF OBJECTIVES, 30 Sept 2025 Sioux City ANG, IA

TSW CDSSIOUXCI

DODAAC FP8116 PPN: 9.1C

related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, Government-owned tanks at Sioux City ANG, IA.

of an order from the appointed Delivery Scheduler. Expedited or emergency delivery requests shall be delivered within 3 calendar days of receipt of an order.

Deliveries shall be made from 0700-1500 hours CST, Tuesday-Friday, excluding federal

185 ARW/LGRF

2920 Headquarters Ave. / Bldg. 247 Sioux City, IA 51111

GOVERNMENT-OWNED ABO TANK(S): ABO shall be delivered into the following

Bldg 247 1 – 3,000 GL 50 psig

Government-owned tanks, required “non-pump assisted off-loads”, tank vent valves are required to be fully open during receipt operations, and are equipped with a 10 micron filter installed in-line with receiving connection which acts as a restriction orifice and mitigates tank pressure build up. In addition, Government-owned tanks are designed under Military Specifications and are not governed by commercial standards. At the Supplier’s expense they may equip conveyance or servicing hose with a tank over pressurization control device or shall use a conveyance without pump assisted off load.

customer signature for delivery at each location for acceptance of quantity. A copy of upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Government-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill to cool down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes prior to pushing liquid into the tank.

Contractor’s transport truck or truck and trailer arrives at the delivery destination driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Security Forces will contact the

STATEMENT OF OBJECTIVES 10 July 2025 St. Paul ANG

TSW ID: CDSSTPAULA

DODAAC: FP8068 PPN: 9.1c related services, requires delivery of Aviator’s Breathing Oxygen (ABO). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary to deliver product f.o.b. destination into Government-owned tanks at St. Paul ANG, MN.

specification MIL-PRF-27210J, or most current version.

of an order from the appointed Delivery Scheduler. Expedited or emergency delivery requests shall be delivered within 3 calendar days of receipt of an order.

Deliveries shall be made from 0700-1400 hours CST, Monday-Friday, excluding federal

606 Militia Drive Bldg 629 St. Paul, MN 55111-4120

Bldg 629 1 – 2,000 GL 30 psig Bldg 629 1 – 400 GL 30 psig shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

FXS0207

Cross-Out

After an emergency delivery order is placed, Contractor shall coordinate delivery time and caused by the Government. Free time will commence at the time the Contractor’s transport truck or truck and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, that additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Contractor and any required corrective actions shall be completed within 30 days after contract award.

NOTE: Over-pressure protection devices shall not be installed on Government-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard, converting the liquid product carried to a gas to purge/cool and remove minor constitutes prior to pushing liquid into the tank.

driver’s full name and date of birth. Deliveries to Military installations will require delivery personnel provide social security number and be subjected to background checks. Driver may also be required to provide proof of insurance and vehicle registration. Some locations will require delivery personnel be escorted while making deliveries. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. Driver must enter through Main Gate on Hiawatha Avenue to be escorted.

STATEMENT OF OBJECTIVES, 02 OCTOBER 2025

TINKER AFB – PLASMA SPRAY SHOP (ENGINE COMPONENT REPAIR)

76 PMXG/MEPCI

TSW: CDSBLD3001

DODAAC: FP8151 PPN: 9.1C

SCOPE: The Defense Logistics Agency (DLA) Aerospace Energy Business Unit, as the Department of Defense (DoD) Integrated Materiel Manager (IMM) for Aerospace Energy products and related services, requires delivery of Liquid Oxygen (LOA), Liquid Nitrogen (LN8) and Liquid Argon (LAA) to Tinker AFB, OK into Government-owned tanks. The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of requested product f.o.b.

destination to Tinker AFB.

PRODUCT:

LOA – Liquid Oxygen, (NSN 9135-01-665-3259), Type II, Grade A, shall meet the requirements of MIL-PRF-25508J or the most current version.

LN8 - Liquid Nitrogen, (NSN 6830-01-666-3681), Type II, Grade L shall meet the requirements of CGA G-10.1 or the most current version.

LAA - Liquid Argon, (NSN 9135-01-649-5576), Type II, Grade A, shall meet the requirements of MIL-PRF 27415D or the most current version.

Workflow (WAWF). In addition, the Contractor shall include sept a copy of COA to

Quantity determination and acceptance shall be at destination. The contractor shall obtain customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

PRODUCT DELIVERY: Routine product deliveries shall be within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Delivery from 0700-1430 Monday-Friday. Closed on Federal Holidays.

TINKER AFB,

PLASMA SPRAY SHOP (Engine Component Repair)

76 PMXG/MEPCI

3001 Staff Drive, Bldg. 3001 (On West Drive, behind Bldg. 3001) Tinker AFB, OK. 73145

Special Access Required for LOA, LN8 and LAA:

The key to opening the gate can be obtained by calling (405) 736-5438.

DESCRIPTION OF GOVERNMENT- OWNED - LIQUID OXYGEN (LOA) TANKS:

LOA shall be delivered into the following Government-owned storage vessels listed below which will require a Contractor provided telemetry system. The storage vessels will be trailer accessible.

LOA TANK LOCATION TANK TYPE TANK CAPACITY *MAWP

On West Drive, (behind Bldg. 3001) 2 /ea. – LOA 900 GL 500 PSIG

*MAWP (Maximum Allowable Working Pressure)

DESCRIPTION OF GOVERNMENT - OWNED LIQUID NITROGEN - LN8 Tank:

LN8 shall be delivered into the following Government-owned storage vessels listed below which will require a Contractor provided telemetry system. The storage vessels will be trailer

LN8 TANK LOCATION TANK TYPE TANK CAPACITY *MAWP

On West Drive (Behind Bldg. 3001) 1 /ea. – LN8 700 GL 250 PSIG

*MAWP (Maximum Allowable Working Pressure

DESCRIPTION OF GOVERNMENT OWNED - LIQUID ARGON (LAA)TANKS:

LAA shall be delivered into the following Government Owned Tank provided storage vessel equipped with cryogenic evaporator and telemetry system listed below. The storage vessel will be trailer accessible.

LAA TANK LOCATION TANK TYPE TANK CAPACITY *MAWP

On West Drive (Behind Bldg. 3001 2 /ea. - LAA 43,024 LBS 250 PSIG

INSTALLATION OF CONTRACTOR-PROVIDED TELEMETRY EQUIPMENT:

The Contractor shall install their Contractor-provided telemetry equipment no later than 30 calendar days from start of contract performance.

REMOVAL OF CONTRACTOR-PROVIDED TELEMETRY EQUIPMENT:

The Contractor-provided equipment shall be removed by the Contractor within 30 calendar days after contract termination. The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment or to change out of existing system to eliminate any delay in supply of product.

EQUIPMENT USAGE FEE/TELEMETRY: The Contractor shall provide automatic fill-up telemetry capability for the tank located at building 3001. The tank shall be equipped with a solar powered remote telemetry unit with battery backup and maintained by the Contractor. The Contractor shall perform all inspections and maintenance of Contractor-provided equipment to assure system provides safe and uninterrupted support. The telemetry unit shall reliably monitor tank inventory levels and transmit product quantity data to the Supplier. The telemetry unit shall reliably monitor and transmit tank status regarding tank safety limits of current product pressure and temperature. The telemetry system shall be continuously monitored by the supplier who will trigger automatic refills of product when the tank levels reach 30% of capacity. Accessibility: As part of the auto-fill telemetry system, the Contractor shall provide an internet (Web) based application accessible by the Government. The Contractor shall submit an invoice for no more or less than the total delivered quantity, and each invoice submitted for automatic fill-up deliveries shall be accompanied by a record of the quantity delivered into the tank.

transport truck or truck, and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. The inspection by the Center (AFLCMC/WNZ), and the activity that physically possesses the tank(s). Contractor and any required corrective actions shall be completed within 30 days after contract award. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior approval from DLA Energy Contracting Officer, Service Control Point (AFPET), Air Force Life Cycle Management (AFLCMC/WNZ), and the activity that physically possesses the tank(s).

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will

Security Requirements: Contractor personnel shall provide a valid passport, driver’s insurance, vehicle paperwork, and shall be escorted at all times at each destination. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. In accordance with the Real ID Act of 2005, starting May 7, 2025, access to federal facilities requires a “REAL ID". If Driver’s license is not “Real ID” Act compliant, contractor must present an acceptable second form of identification (i.e. U.S. passport, passport card, military ID, etc...). For assistance, please contact Hunter Mackey: 405-734-4086.

PRODUCT:

PRODUCT:

PRODUCT:

Product deliveries shall be made to the following address:

Special Access Required for LOA, LN8 and LAA:

DESCRIPTION OF GOVERNMENT- OWNED - LIQUID OXYGEN (LOA) TANKS:

*MAWP (Maximum Allowable Working Pressure)

DESCRIPTION OF GOVERNMENT OWNED - LIQUID ARGON (LAA)TANKS:

*MAWP (Maximum Allowable Working Pressure)

INSTALLATION OF CONTRACTOR-PROVIDED TELEMETRY EQUIPMENT:

REMOVAL OF CONTRACTOR-PROVIDED TELEMETRY EQUIPMENT:

STATEMENT OF OBJECTIVES, 3 OCTOBER 2025

TINKER AFB – PLASMA SPRAY SHOP (BLADE REPAIR)

76 PMXG/MEPBB

TSW: CDSBLD3221

DODAAC: FP8151 PPN: 9.1C

SCOPE: The Defense Logistics Agency (DLA) Aerospace Energy Business Unit, as the products and related services, requires delivery of Liquid Argon to Tinker AFB, OK into Government-owned tanks. The Contractor shall provide all product, materials, supplies, management, tools, equipment, transportation and labor necessary for the delivery of requested product f.o.b. destination to Tinker AFB.

PRODUCT: Liquid Argon, Type II, Grade A, NSN 9135-01-649-5576, shall meet the requirements of MIL-PRF-27415D or the most current version.

Workflow (WAWF). In addition, the Contractor shall include a copy of COA to accompany each delivery to be provided to acceptor at delivery destination.

customer signature for delivery at each location for acceptance of quantity. A copy of the signed quantity acceptance document must be attached to the WAWF invoice submittal for payment.

PRODUCT DELIVERY: Routine product deliveries shall be within 7 calendar days after receipt of an order from the appointed Delivery Scheduler. Delivery from 0700-1500 Monday-Friday. Closed on Federal Holidays.

Tinker AFB, Plasma Spray Shop (Blade Repair)

76 PMXG/MEPBB

3221 East Drive., Bldg. 3221 (Locked cage behind Bldg. 3221) Tinker AFB, OK. 73145

DESCRIPTION OF GOVERNMENT OWNED LIQUID ARGON TANK:

LAA shall be delivered into the following Government Owned Tank provided storage storage vessel will be trailer accessible.

Location Tank Type Tank

Capacity

UOM *MAWP

Locked cage, behind Bldg. 3221 1/ea. – LAA 20,930 LBS 250 PSIG

TELEMETRY USAGE: The Contractor shall provide and install solar powered telemetry monitoring system to each tank; ensuring product level is maintained at or above a 30% safety level unless otherwise adjusted by the Customer. Contractor shall coordinate installation with Customer and provide online web access to daily tank levels and usage rates to the Customer. Each telemetry system shall have a battery backup and meet industry standards for accurate data reporting.

EQUIPMENT INSTALLATION: Contractor shall install their Contractor provided equipment within the existing system footprints, no later than 30 calendar days from start of contract performance. The Contractor shall also perform all inspections and maintenance of Contractor provided equipment to assure systems provide safe and uninterrupted support.

The Contractor will coordinate with the current supplier to effect removal of current equipment and installation of new equipment, or to retain the current equipment.

REMOVAL OF EQUIPMENT: The Contractor provided tanks/equipment shall be removed by the Contractor within 30 calendar days after contract termination. The Contractor will coordinate with the follow-on supplier to effect removal of current equipment and installation of new equipment.

After an emergency delivery order is placed, Contractor shall coordinate delivery time and acceptance of emergency deliveries with customer.

FILL LINE RESTRICTION ORIFICE: If it is determined during supplier site visits or upon review of Customer tank technical information, additional tank over-pressure protection is required to comply with CGA P-59, Prevention of Over-Pressure during Filling of Cryogenic Vessels, the Contractor shall identify the deficiency to the designated Customer representative(s) for Implementation of corrective action. The Contractor may be requested to provide and install the additional tank protection, which may encompass any of the methods identified in the P-59. NOTE: Over-pressure protection devices shall not be installed on Customer-owned storage tanks without prior coordination with DLA Energy Contracting Officer and the activity that physically possesses the tank(s).

transport truck or truck, and trailer arrives at the delivery destination (receiving tank identified in the contract) and will end when the carrier is released. For items involving multiple drops, time between drops will not be included in the free time.

TANK HOT FILL: Occasionally, the Contractor may be required to perform a Hot Fill in order to cool-down and refill any tank that has gone empty and is warm. The supplier will use the commercial industrial gas standard that would remove the minor constitutes outlined in current product specifications.

Security Requirements: Contractor personnel shall provide a valid passport, driver’s insurance, vehicle paperwork, and shall be escorted at all times at each destination. All delivery vehicles are subject to search by security personnel prior to accessing delivery location and while on each facility. In accordance with the Real ID Act of 2005, starting May 7, 2025, access to federal facilities requires a “REAL ID". If Driver’s license is not “Real ID” Act compliant, contractor must present an acceptable second form of identification (i.e. U.S. passport, passport card, military ID, etc...). For assistance, please contact Hunter Mackey @ 405-734-4086. Special Access Required:

The key to opening the gate can be obtained by calling (405) 736-5438.

DESCRIPTION OF GOVERNMENT OWNED LIQUID ARGON TANK:

*MAWP (Maximum Allowable Working Pressure)

STATEMENT OF OBJECTIVES, 03 OCTOBER 2025

TINKER AFB, WELDING/ HEAT TREAT SHOP / 553 CMMXS/MXDPA

TSW: CDSBLD9001

DODAAC: FP8131 PPN: 9.1C

SCOPE: The Defense Logistics Agency (DLA Energy), as the Department of Defense services, requires delivery of Liquid Argon (LAA). The Contractor shall provide all materials, supplies, product, management, tools, equipment, transportation and labor necessary for the delivery of requested products f.o.b. destination into Government-owned tank at Tinker AFB, OK.

PRODUCT:

LAA - ARGON, LIQUID, GRADE A, 99.998%, BULK (NSN 9135-01-649-5576), Type II, Grade A shall meet the requirements of MIL-PRF 27415D or the most current version.

One copy of the Certificate of Analysis (COA) for each sample required by the specification shall be submitted by the Contractor as an attachment to…