ATTACHMENT 8 - Drawings - Part 5.pdf

PDF 16 MB Posted

Attached to
Y1DA--Specialty Treatment Expansion (Minor) Construction - Tampa
Solicitation number
36C77623B0016
Issued by

About this file

Written by GovTribe AI ·

This file is an attachment to a federal contract solicitation for construction services. The Department of Veterans Affairs Technology Acquisition Center Austin is seeking proposals to expand specialty treatment facilities at the Tampa VA Medical Center. Offerors must submit proposals by the date listed in solicitation number 36C77623B0016 to be considered for award of a contract to perform minor construction work expanding specialty care capabilities. The attachment provides technical drawings of the project scope. Interested parties should review all solicitation documents for full details on response requirements and evaluation criteria.

View the file

Other files

File Type Posted
Technical Questions - FINAL - Tampa 9-22-23.pdf PDF
2226 - ASI 1- Technical Clarifications - 08-31-23 - Part 1.pdf PDF
2226 - ASI 1- Technical Clarifications - 08-31-23 - Part 2.pdf PDF
0941.2300130.0000- AA-1 - 100% SUBMITTAL JAMES HALEY VETERANS HOSPITAL AA-1.pdf PDF
GEO_James_Haley_Veterans_Hospital_Heliport_-_AES.PDF PDF
Building 1- Life Safety Plans- 4-11-13 FOR REFERENCE ONLY - Part 1.pdf PDF
Building 1- Life Safety Plans- 4-11-13 FOR REFERENCE ONLY - Part 2.pdf PDF
36C77623B0016 0004.pdf PDF
James Haley Veterans Hospital - Record Drawings 2.pdf PDF
James Haley Veterans Hospital - Record Drawings 1.pdf PDF
ATTACHMENT 13 - Wage Rates - Hillsborough 9-15-23.pdf PDF
36C77623B0016 0003.pdf PDF
36C77623B0016 0002.pdf PDF
ATTACHMENT 13 - Wage Rates - Hillsborough 8-25-23.pdf PDF
Site Visit Sign-in Sheet - Tampa 8-15-23.pdf PDF
36C77623B0016 0001.pdf PDF
ATTACHMENT 14 - Contractor Safety - Environmental Form.docx DOCX document
ATTACHMENT 15 - Site Visit Instructions.pdf PDF
ATTACHMENT 13 - Wage Rates - Hillsborough 1-13-23.pdf PDF
ATTACHMENT 10 - Drawings - Part 7.pdf PDF
ATTACHMENT 1 - Specifications - Volume 1.pdf PDF
ATTACHMENT 5 - Drawings - Part 2.pdf PDF
36C77623B0016 - 8-7-23.pdf PDF
ATTACHMENT 12 - Limitations on Subcontracting - Construction.docx DOCX document
ATTACHMENT 6 - Drawings - Part 3.pdf PDF
ATTACHMENT 11 - Drawings - Part 8.pdf PDF
ATTACHMENT 7 - Drawings - Part 4.pdf PDF
ATTACHMENT 4 - Drawings - Part 1.pdf PDF
ATTACHMENT 9 - Drawings - Part 6.pdf PDF
ATTACHMENT 3 - Specifications - Volume 3 - Reference Only.pdf PDF
ATTACHMENT 2 - Specifications - Volume 2.pdf PDF
Show all 31

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

HVAC GENERAL NOTES

SUZANNE LEVISEUR P.E.

LICENSE NO. 36120

ttv architects, inc.

115 EAST FORSYTH ST

JACKSONVILLE, FLORIDA 32202

T 904.798.8333 F 904.798.8335 www.ttvarch.com

FL Lic#AA0002609

HADDAD ENGINEERING INC.

3030 HARTLEY ROAD SUITE #290

JACKSONVILLE, FL 32257

T 904.262.5066 F 904.262.7139 www.haddadeng.com

CERTIFICATE OF AUTHORIZATION NO. 4000

08-19-22 PHYSICAL AND ELECTRICAL SECURITY UPDATE

AutoCAD SHX Text

HEATING COIL TYPE

AutoCAD SHX Text

TERMINAL BOX SCHEDULE

AutoCAD SHX Text

CAV-G-1

AutoCAD SHX Text

INLET SIZE (INCHES)

AutoCAD SHX Text

AIR FLOW (CFM-MIN/MAX.)

AutoCAD SHX Text

SOUND RATING (NC)

AutoCAD SHX Text

MINIMUM S.P. (IN. W.G.)

AutoCAD SHX Text

UNIT NO.

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

HEATING MINIMUM CFM

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

CAPACITY TOTAL (MBH)

AutoCAD SHX Text

COIL ROWS

AutoCAD SHX Text ENT. AIR/LVG. AIR dB/dB (F)

AutoCAD SHX Text

MAX. AIR P.D. (IN. W.G.)

AutoCAD SHX Text

WATER FLOW RATE (GPM)

AutoCAD SHX Text

ENT./LVG. WATER TEMPERATURE

AutoCAD SHX Text

MAX. WATER P.D. (FT. W.G.)

AutoCAD SHX Text

AutoCAD SHX Text 1090/1090

AutoCAD SHX Text

AutoCAD SHX Text 0.23

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 23.3

AutoCAD SHX Text

AutoCAD SHX Text 55/74.7

AutoCAD SHX Text 0.3

AutoCAD SHX Text 4.1

AutoCAD SHX Text 160/155

AutoCAD SHX Text 1.6

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

SDV-9

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

CAV-G-2

AutoCAD SHX Text

AutoCAD SHX Text 1320/1320

AutoCAD SHX Text

AutoCAD SHX Text 0.32

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 26.2

AutoCAD SHX Text

AutoCAD SHX Text 55/73.3

AutoCAD SHX Text 0.4

AutoCAD SHX Text 5.8

AutoCAD SHX Text 3.0

AutoCAD SHX Text

SDV-9

AutoCAD SHX Text

AutoCAD SHX Text 11.4

AutoCAD SHX Text 0.19

AutoCAD SHX Text

AutoCAD SHX Text 520/520

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SDV-7

AutoCAD SHX Text

AutoCAD SHX Text 0.2

AutoCAD SHX Text 1.1

AutoCAD SHX Text 1.0

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-G-3

AutoCAD SHX Text

AutoCAD SHX Text 5.4

AutoCAD SHX Text 0.05

AutoCAD SHX Text

AutoCAD SHX Text 190/190

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SDV-5

AutoCAD SHX Text

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/80.3

AutoCAD SHX Text

CAV-G-6

AutoCAD SHX Text

AutoCAD SHX Text 4.7

AutoCAD SHX Text 0.03

AutoCAD SHX Text

AutoCAD SHX Text 140/140

AutoCAD SHX Text 049, 050

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SDV-4

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/85.1

AutoCAD SHX Text

CAV-G-5

AutoCAD SHX Text

AutoCAD SHX Text 5.4

AutoCAD SHX Text 0.05

AutoCAD SHX Text

AutoCAD SHX Text 190/190

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SDV-5

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/80.3

AutoCAD SHX Text

CAV-G-4

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 040, 043, 044, 060

AutoCAD SHX Text

AutoCAD SHX Text 16.1

AutoCAD SHX Text 0.23

AutoCAD SHX Text

AutoCAD SHX Text 740/740

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

SDV-8

AutoCAD SHX Text 0.3

AutoCAD SHX Text 3.5

AutoCAD SHX Text 7.2

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-G-7

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 15.9

AutoCAD SHX Text 0.22

AutoCAD SHX Text

AutoCAD SHX Text 730/730

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.3

AutoCAD SHX Text 3.9

AutoCAD SHX Text 6.5

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-G-8

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 8.2

AutoCAD SHX Text 0.15

AutoCAD SHX Text

AutoCAD SHX Text 460/460

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.2

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.5

AutoCAD SHX Text 55/71.2

AutoCAD SHX Text

CAV-G-9

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 11.1

AutoCAD SHX Text 0.2

AutoCAD SHX Text

AutoCAD SHX Text 510/510

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

AutoCAD SHX Text 0.2

AutoCAD SHX Text 1.1

AutoCAD SHX Text 0.9

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-G-10

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

STEAM TO HOT WATER HEAT EXCHANGER SCHEDULE

AutoCAD SHX Text

MARK

AutoCAD SHX Text

LOCATION

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

WATER CONDITIONS

AutoCAD SHX Text

STEAM

AutoCAD SHX Text

PRESSURE

AutoCAD SHX Text

REMARKS

AutoCAD SHX Text

FLOW

AutoCAD SHX Text

EWT

AutoCAD SHX Text

LWT

AutoCAD SHX Text

WPD (MAX.)

AutoCAD SHX Text

ENT

AutoCAD SHX Text

CONTROL

AutoCAD SHX Text

VALVE

AutoCAD SHX Text

CAPACITY

AutoCAD SHX Text

GPM

AutoCAD SHX Text °F

AutoCAD SHX Text °F

AutoCAD SHX Text

FT

AutoCAD SHX Text

PSIG

AutoCAD SHX Text

LBS/HR

AutoCAD SHX Text

MBH

AutoCAD SHX Text

HX-1

AutoCAD SHX Text

GB-044

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 846.7

AutoCAD SHX Text

AutoCAD SHX Text

HX-2

AutoCAD SHX Text

GB-044

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 846.7

AutoCAD SHX Text

UNIT IS STAND-BY

AutoCAD SHX Text

SYSTEM AND/OR SERVICE

AutoCAD SHX Text

HEATING WATER

AutoCAD SHX Text

HEATING WATER

AutoCAD SHX Text

SHELL & TUBE

AutoCAD SHX Text

SHELL & TUBE

AutoCAD SHX Text CO-22-1, CO-23-1, CO-24-1, CO-25-1, 045, 046, 047, 048, 059, 066, 067, 068, 069, 070, 072

AutoCAD SHX Text 058, 061, 062, 063

AutoCAD SHX Text 055, 056, 057

AutoCAD SHX Text

HEATING COIL TYPE

AutoCAD SHX Text

TERMINAL BOX SCHEDULE

AutoCAD SHX Text

INLET SIZE (INCHES)

AutoCAD SHX Text

AIR FLOW (CFM-MIN/MAX.)

AutoCAD SHX Text

SOUND RATING (NC)

AutoCAD SHX Text

UNIT NO.

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

HEATING MINIMUM CFM

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

CAPACITY TOTAL (MBH)

AutoCAD SHX Text

COIL ROWS

AutoCAD SHX Text ENT. AIR/LVG. AIR dB/dB (F)

AutoCAD SHX Text

MAX. AIR P.D. (IN. W.G.)

AutoCAD SHX Text

WATER FLOW RATE (GPM)

AutoCAD SHX Text

ENT./LVG. WATER TEMPERATURE

AutoCAD SHX Text

MAX. WATER P.D. (FT. W.G.)

AutoCAD SHX Text

AutoCAD SHX Text 100/100

AutoCAD SHX Text 0.01

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 3800/3800

AutoCAD SHX Text 0.01

AutoCAD SHX Text

AutoCAD SHX Text 0.01

AutoCAD SHX Text

AutoCAD SHX Text 2190/2190

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 44.1

AutoCAD SHX Text 0.27

AutoCAD SHX Text

AutoCAD SHX Text 2310/2310

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

AutoCAD SHX Text 0.4

AutoCAD SHX Text 4.8

AutoCAD SHX Text 3.1

AutoCAD SHX Text 55/72.6

AutoCAD SHX Text

CAV-1-6

AutoCAD SHX Text

AutoCAD SHX Text 13.9

AutoCAD SHX Text 0.10

AutoCAD SHX Text

AutoCAD SHX Text 640/640

AutoCAD SHX Text 04, 05

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.2

AutoCAD SHX Text 1.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-1-5

AutoCAD SHX Text

AutoCAD SHX Text 51.7

AutoCAD SHX Text 0.25

AutoCAD SHX Text

AutoCAD SHX Text 2740/2740

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.4

AutoCAD SHX Text 5.1

AutoCAD SHX Text 3.7

AutoCAD SHX Text 55/72.4

AutoCAD SHX Text

CAV-1-4

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.7

AutoCAD SHX Text 0.03

AutoCAD SHX Text

AutoCAD SHX Text 130/130

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/87.7

AutoCAD SHX Text

CAV-1-7

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 6.3

AutoCAD SHX Text 0.11

AutoCAD SHX Text

AutoCAD SHX Text 260/260

AutoCAD SHX Text 017, 018

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/76.8

AutoCAD SHX Text

CAV-1-8

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 10.7

AutoCAD SHX Text 0.12

AutoCAD SHX Text

AutoCAD SHX Text 490/490

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text 0.2

AutoCAD SHX Text 1.0

AutoCAD SHX Text 0.7

AutoCAD SHX Text 55/75

AutoCAD SHX Text

CAV-1-9

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 6.8

AutoCAD SHX Text 0.17

AutoCAD SHX Text

AutoCAD SHX Text 330/330

AutoCAD SHX Text

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.5

AutoCAD SHX Text 0.2

AutoCAD SHX Text 55/73.7

AutoCAD SHX Text

CAV-1-10

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

AutoCAD SHX Text 20.2

AutoCAD SHX Text 0.18

AutoCAD SHX Text

AutoCAD SHX Text 930/930

AutoCAD SHX Text

UNDER 20

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

AutoCAD SHX Text 0.2

AutoCAD SHX Text 2.6

AutoCAD SHX Text 0.7

AutoCAD SHX Text 55/75

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 06, 07

AutoCAD SHX Text

AutoCAD SHX Text

CAV-1-11

AutoCAD SHX Text

CAV-1-2

AutoCAD SHX Text

CAV-1-3

AutoCAD SHX Text

CAV-1-1

AutoCAD SHX Text 02A

AutoCAD SHX Text 012, 013, 014, 015, 016, C1-61-1

AutoCAD SHX Text 010, 011, 019, 023, 024, 09, C1-60-1, C1-62-1, C1-62-1, C1-63-1

AutoCAD SHX Text

MINIMUM S.P. (IN. W.G.)

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text 160/154

AutoCAD SHX Text 160/139

AutoCAD SHX Text 160/138

AutoCAD SHX Text 160/141

AutoCAD SHX Text 160/138

AutoCAD SHX Text 160/151

AutoCAD SHX Text 160/150

AutoCAD SHX Text 160/127

AutoCAD SHX Text 160/139

AutoCAD SHX Text 160/139

AutoCAD SHX Text 160/134

AutoCAD SHX Text 160/141

AutoCAD SHX Text 160/141

AutoCAD SHX Text 160/135

AutoCAD SHX Text 160/138

AutoCAD SHX Text 160/133

AutoCAD SHX Text 160/144

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

PRICE

AutoCAD SHX Text

SDV-7

AutoCAD SHX Text

SDV-8

AutoCAD SHX Text

SDV-7

AutoCAD SHX Text

SDV-4

AutoCAD SHX Text

SDV-16

AutoCAD SHX Text

SDV-14

AutoCAD SHX Text

SDV-14

AutoCAD SHX Text

SDV-9

AutoCAD SHX Text

SDV-16

AutoCAD SHX Text

SDV-4

AutoCAD SHX Text

SDV-8

AutoCAD SHX Text

SDV-6

AutoCAD SHX Text

SDV-6

AutoCAD SHX Text

SDV-9

AutoCAD SHX Text NOTES: 1. NC VALUES SCHEDULED ARE DISCHARGE RATINGS WITH AN INLET TO DISCHARGE STATIC PRESSURE DIFFERENCE OF 0.50"w.g. MANUFACTURERS OTHER THAN THE BASIS OF DESIGN MUST BE WITHIN 1dB OF ALL DISCHARGE AND RADIATION SOUND POWER VALUES NC VALUES SCHEDULED ARE DISCHARGE RATINGS WITH AN INLET TO DISCHARGE STATIC PRESSURE DIFFERENCE OF 0.50"w.g. MANUFACTURERS OTHER THAN THE BASIS OF DESIGN MUST BE WITHIN 1dB OF ALL DISCHARGE AND RADIATION SOUND POWER VALUES CATALOGUED BY THE MANUFACTURER OF THE BASIS OF DESIGN OR ADDITIONAL ATTENUATION MUST BE FURNISHED. 2. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. SEE FLOOR PLANS FOR PROPOSED CONTROL PANEL LOCATION. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. SEE FLOOR PLANS FOR PROPOSED CONTROL PANEL LOCATION. 3. ACCEPTABLE ALTERNATE MANUFACTURER IS PHOENIX CONTROLS.ACCEPTABLE ALTERNATE MANUFACTURER IS PHOENIX CONTROLS.

AutoCAD SHX Text

EFFICIENCY

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

FILTER DATA:

AutoCAD SHX Text

TYPE - PREFILTER

AutoCAD SHX Text

CARRIER

AutoCAD SHX Text 39M21

AutoCAD SHX Text 1, 3, 4, 5, 6, 7

AutoCAD SHX Text

UNIT DESIGNATION

AutoCAD SHX Text

EXTERNAL. S. P./TOTAL S.P. (IN. W.G.)

AutoCAD SHX Text

HORSEPOWER (MAXIMUM)

AutoCAD SHX Text

CFM TOTAL/OUTSIDE AIR

AutoCAD SHX Text

COOLING COIL DATA:

AutoCAD SHX Text

VOLTS/PHASE/HERTZ

AutoCAD SHX Text

MAX. WATER P. D. (FT. W.G.)

AutoCAD SHX Text

ENT./LVG. WATER TEMPERATURE

AutoCAD SHX Text

WATER FLOW RATE (GPM)

AutoCAD SHX Text

MIN. ROWS/ MAX. FINS

AutoCAD SHX Text

MAX. AIR P.D. (IN. W.G.)

AutoCAD SHX Text

CAPACITY TOTAL/SENSIBLE (MBH)

AutoCAD SHX Text LVG. AIR dB/wB (F)

AutoCAD SHX Text ENT. AIR dB/wB (F)

AutoCAD SHX Text

FAN DATA

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

TYPE

AutoCAD SHX Text 6.6

AutoCAD SHX Text 0.9

AutoCAD SHX Text 48.6

AutoCAD SHX Text 45/55

AutoCAD SHX Text 81.8/67.7

AutoCAD SHX Text 52.9/52.7

AutoCAD SHX Text 8/8

AutoCAD SHX Text 243.9/174.2

AutoCAD SHX Text 460/3/60

AutoCAD SHX Text 1.5/4.3

AutoCAD SHX Text

AutoCAD SHX Text 5890/2010

AutoCAD SHX Text

AHU-G-1

AutoCAD SHX Text

GROUND FLOOR

AutoCAD SHX Text

CW/HW CV

AutoCAD SHX Text

AIR HANDLING UNIT SCHEDULE

AutoCAD SHX Text

MAX. AIR P.D. CLEAN/DIRTY

AutoCAD SHX Text 1.0/2.7

AutoCAD SHX Text

%%UCOMPONENTS LEGEND:

AutoCAD SHX Text

CCL - COOLING COIL

AutoCAD SHX Text FAN - PLENUM or FORWARD CURVED FAN

AutoCAD SHX Text

FFL - FINAL FILTER

AutoCAD SHX Text

FLT - PRE-FILTER

AutoCAD SHX Text

MXB - MIXING BOX

AutoCAD SHX Text

HCL - HEATING COIL

AutoCAD SHX Text

UNIT COMPONENTS

AutoCAD SHX Text

(IN DIRECTION OF AIR FLOW

AutoCAD SHX Text

SEE LEGEND BELOW)

AutoCAD SHX Text

MXB, FLT, HCL, FAN, CCL, FFL

AutoCAD SHX Text

FAN

AutoCAD SHX Text

CCL

AutoCAD SHX Text

FLT

AutoCAD SHX Text

MXB

AutoCAD SHX Text

HCL

AutoCAD SHX Text

EFFICIENCY

AutoCAD SHX Text

TYPE - FINAL FILTER

AutoCAD SHX Text

2" THROWAWAY/12" CARTRIDGE

AutoCAD SHX Text

CARRIER

AutoCAD SHX Text 39M25

AutoCAD SHX Text 1, 2, 3, 4, 5, 6, 7

AutoCAD SHX Text

MERV 8/MERV 14

AutoCAD SHX Text 3.7

AutoCAD SHX Text 0.7

AutoCAD SHX Text 79.6

AutoCAD SHX Text 45/55

AutoCAD SHX Text 77.9/68.6

AutoCAD SHX Text 55.0/54.2

AutoCAD SHX Text 6/8

AutoCAD SHX Text 399.1/332.8

AutoCAD SHX Text 460/3/60

AutoCAD SHX Text 1.5/5.2

AutoCAD SHX Text

AutoCAD SHX Text 13920/2030

AutoCAD SHX Text

RTU-1-1

AutoCAD SHX Text

FIRST FLOOR

AutoCAD SHX Text

CW/HW CV

AutoCAD SHX Text 1.3/3.5

AutoCAD SHX Text

PLENUM

AutoCAD SHX Text

PLENUM

AutoCAD SHX Text

MXB, FLT, HCL, FAN, CCL, FFL

AutoCAD SHX Text NOTES: 1. PROVIDE WITH ABB MODEL ACS350 VFD OR APPROVED EQUIVALENT. PROVIDE WITH DISCONNECT, BYPASS AND PROVIDE WITH ABB MODEL ACS350 VFD OR APPROVED EQUIVALENT. PROVIDE WITH DISCONNECT, BYPASS AND AUXILIARY CONTACTS. 2. EXT. S.P. DOES NOT INCLUDE FILTER. INCLUDES DUCTWORK ONLY. EXT. S.P. DOES NOT INCLUDE FILTER. INCLUDES DUCTWORK ONLY. 3. PROVIDE SMOKE DETECTOR(S) IN SUPPLY DUCT(S). (5) - PROVIDE MORE THAN ONE WHEN INSTALLATION OF ONE PROVIDE SMOKE DETECTOR(S) IN SUPPLY DUCT(S). (5) - PROVIDE MORE THAN ONE WHEN INSTALLATION OF ONE CANNOT BE DONE INACCORDANCE WITH MANUFACTURES REQUIREMENTS. 4. PROVIDE FACTORY FABRICATED MIXING BOX. PROVIDE FACTORY FABRICATED MIXING BOX. 5. FAN MOTOR SELECTION BASED ON DIRTY FILTERS. FAN MOTOR SELECTION BASED ON DIRTY FILTERS. 6. MAXIMUM FINS FOR COILS IS 11 PER FOOT. MAXIMUM FINS FOR COILS IS 11 PER FOOT. 7. MOTOR SHALL BE BALDOR SUPER "E" PREMIUM EFFICIENCY.MOTOR SHALL BE BALDOR SUPER "E" PREMIUM EFFICIENCY.

AutoCAD SHX Text

FFL

AutoCAD SHX Text

2" THROWAWAY/12" CARTRIDGE

AutoCAD SHX Text

2" THROWAWAY/12" CARTRIDGE

AutoCAD SHX Text

2" THROWAWAY/12" CARTRIDGE

AutoCAD SHX Text

MERV 8/MERV 14

AutoCAD SHX Text

MERV 8/MERV 14

AutoCAD SHX Text

MERV 8/MERV 14

AutoCAD SHX Text

HEATING COIL DATA:

AutoCAD SHX Text

MAX. WATER P. D. (FT. W.G.)

AutoCAD SHX Text

ENT./LVG. WATER TEMPERATURE

AutoCAD SHX Text

WATER FLOW RATE (GPM)

AutoCAD SHX Text

MIN. ROWS/ MAX. FINS

AutoCAD SHX Text

MAX. AIR P.D. (IN. W.G.)

AutoCAD SHX Text

CAPACITY TOTAL (MBH)

AutoCAD SHX Text

ENT./LVG. AIR TEMPERATURE (F)

AutoCAD SHX Text 1.5

AutoCAD SHX Text 0.3

AutoCAD SHX Text 15.9

AutoCAD SHX Text 160/140

AutoCAD SHX Text 56.4/82.3

AutoCAD SHX Text 1/8

AutoCAD SHX Text 156.6

AutoCAD SHX Text 4.0

AutoCAD SHX Text 0.3

AutoCAD SHX Text 36.9

AutoCAD SHX Text 160/140

AutoCAD SHX Text 64.2/88.7

AutoCAD SHX Text 1/8

AutoCAD SHX Text 362.9

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text

TYPICAL

AutoCAD SHX Text

%%UHVAC LEGEND

AutoCAD SHX Text

BTUH/1000

AutoCAD SHX Text

MANUAL VOLUME DAMPER

AutoCAD SHX Text

OUTSIDE AIR

AutoCAD SHX Text

SMOKE DETECTOR

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text

WITH

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

FLEX. RUN OUT

AutoCAD SHX Text

CFM

AutoCAD SHX Text

NECK SIZE

AutoCAD SHX Text

MBH

AutoCAD SHX Text

MVD

AutoCAD SHX Text 0.A.

AutoCAD SHX Text

SD

AutoCAD SHX Text

TYP.

AutoCAD SHX Text

FD

AutoCAD SHX Text W/

AutoCAD SHX Text

AIR HANDLING UNIT #1

AutoCAD SHX Text

CONDENSATE DRAIN

AutoCAD SHX Text

CONSTANT AIR VOLUME TERMINAL

AutoCAD SHX Text

ENERGY EFFICIENCY RATIO

AutoCAD SHX Text

EXHAUST FAN #1

AutoCAD SHX Text

ENTERING

AutoCAD SHX Text

EXTERNAL STATIC PRESSURE

AutoCAD SHX Text

HORSEPOWER

AutoCAD SHX Text

HOT WATER RETURN

AutoCAD SHX Text

CD

AutoCAD SHX Text

AHU-1

AutoCAD SHX Text

CAV

AutoCAD SHX Text E.E.R.

AutoCAD SHX Text

EF-1

AutoCAD SHX Text

ENT.

AutoCAD SHX Text

HP

AutoCAD SHX Text

ESP

AutoCAD SHX Text

HWR

AutoCAD SHX Text A

AutoCAD SHX Text

TEMPERATURE SENSOR

AutoCAD SHX Text 10" 410

AutoCAD SHX Text S

AutoCAD SHX Text T

AutoCAD SHX Text

CHILLED WATER RETURN

AutoCAD SHX Text

CHWR

AutoCAD SHX Text

CHILLED WATER SUPPLY

AutoCAD SHX Text

CHWS

AutoCAD SHX Text

VAV

AutoCAD SHX Text

VARIABLE AIR VOLUME

AutoCAD SHX Text

CV

AutoCAD SHX Text

CONSTANT VOLUME

AutoCAD SHX Text

UNDERCUT

AutoCAD SHX Text

HOT WATER SUPPLY

AutoCAD SHX Text

HWS

AutoCAD SHX Text U.C.

AutoCAD SHX Text

1. CONNECTION TO EQUIPMENT SHALL BE VERIFIED WITH MANUFACTURER CERTIFIED DRAWINGS. VERIFY AND CONNECTION TO EQUIPMENT SHALL BE VERIFIED WITH MANUFACTURER CERTIFIED DRAWINGS. VERIFY AND PROVIDE DUCT TRANSITIONS TO FURNISHED EQUIPMENT. FIELD VERIFY AND COORDINATE ALL DIMENSIONS BEFORE FABRICATION. 2. VERIFY INSTALLED STRUCTURE PRIOR TO FABRICATION OF DUCTWORK AND THE PLACEMENT OF ROOFTOP VERIFY INSTALLED STRUCTURE PRIOR TO FABRICATION OF DUCTWORK AND THE PLACEMENT OF ROOFTOP UNITS AND THE HANGING OF DUCTWORK. COORDINATE ALL DUCTWORK WITH JOIST AND STEEL SPACING. 3. SEE SPECIFICATIONS FOR GAGES AND BRACING REQUIREMENTS OF DUCTWORK. ALL DUCT SIZES SHOWN SEE SPECIFICATIONS FOR GAGES AND BRACING REQUIREMENTS OF DUCTWORK. ALL DUCT SIZES SHOWN ARE INSIDE CLEAR DIMENSIONS. 4. ALL DUCTS SHALL BE GROUNDED ACROSS FLEXIBLE CONNECTIONS WITH COPPER FLEXIBLE STRAP 1/8" ALL DUCTS SHALL BE GROUNDED ACROSS FLEXIBLE CONNECTIONS WITH COPPER FLEXIBLE STRAP 1/8" BY 1/2" WIDE MULTI-STRANDED BRAID (#4 AWG) WITH FLAT LUG (3/16" HOLE DIAMETER) AT EACH END FOR ATTACHMENT. EACH FLEXIBLE STRAP SHALL BE 8" LONG. 5. ACCESS PANELS IN DUCT WORK AND CEILINGS SHALL BE PROVIDED FOR OPERATION AND MAINTENANCE ACCESS PANELS IN DUCT WORK AND CEILINGS SHALL BE PROVIDED FOR OPERATION AND MAINTENANCE OF ALL FANS, HEATERS, VALVES, DAMPERS, AND MECHANICAL EQUIPMENT. 6. PROVIDE EACH VAV BOX WITH AN INDIVIDUAL TEMPERATURE SENSOR. THE CENTERLINE OF THE SENSORS PROVIDE EACH VAV BOX WITH AN INDIVIDUAL TEMPERATURE SENSOR. THE CENTERLINE OF THE SENSORS SHALL BE LOCATED AT 46" AFF. 7. ALL DUCTS AND PIPING SHALL BE INSTALLED AS TIGHT AS POSSIBLE TO WALLS AND BEAMS. ALL DUCTS AND PIPING SHALL BE INSTALLED AS TIGHT AS POSSIBLE TO WALLS AND BEAMS. 8. FLEXIBLE DUCT CONNECTIONS SHALL BE PROVIDED ON ALL DUCT CONNECTIONS TO FANS AND AIR FLEXIBLE DUCT CONNECTIONS SHALL BE PROVIDED ON ALL DUCT CONNECTIONS TO FANS AND AIR HANDLING UNITS. FLEX SHALL BE A MINIMUM OF 4" AND A MAXIMUM OF 8" IN LENGTH. 9. INSIDE OR OUTSIDE OF DUCT VISIBLE THROUGH GRILLES, REGISTERS, AND DIFFUSERS OR EXPOSED DUCT INSIDE OR OUTSIDE OF DUCT VISIBLE THROUGH GRILLES, REGISTERS, AND DIFFUSERS OR EXPOSED DUCT AND EQUIPMENT SHALL BE PAINTED FLAT BLACK. 10. ALL EQUIPMENT, PIPING, AND DUCTWORK SHALL BE SUPPORTED AS DETAILED AND SPECIFIED. ALL EQUIPMENT, PIPING, AND DUCTWORK SHALL BE SUPPORTED AS DETAILED AND SPECIFIED. ADDITIONAL SUPPORTS SHALL BE PROVIDED AS REQUIRED TO PROVIDE A VIBRATION FREE INSTALLATION. 11. PROVIDE AND INSTALL IONIZATION TYPE SMOKE DETECTORS IN SUPPLY AIR STREAM FOR FAN SHUTDOWN PROVIDE AND INSTALL IONIZATION TYPE SMOKE DETECTORS IN SUPPLY AIR STREAM FOR FAN SHUTDOWN ON AIR HANDLING UNITS (AS SCHEDULED). SMOKE DETECTORS SHALL BE CONNECTED TO AUDIBLE/VISUAL ALARM. PROVIDE ACCESS FOR SMOKE DETECTORS IN DUCTWORK. 12. INSULATE THE BACKS OF EACH RETURN REGISTER AND SUPPLY DIFFUSER WITH A 2" THICK DUCTWRAP INSULATE THE BACKS OF EACH RETURN REGISTER AND SUPPLY DIFFUSER WITH A 2" THICK DUCTWRAP INSULATION. MINIMUM R-VALUE = R-6. 13. FLEXIBLE DUCT CONNECTING MAIN DUCT TO SUPPLY DIFFUSER SHALL NOT EXCEED 8 FEET IN LENGTH. FLEXIBLE DUCT CONNECTING MAIN DUCT TO SUPPLY DIFFUSER SHALL NOT EXCEED 8 FEET IN LENGTH. IF THE DISTANCE EXCEEDS THIS LIMIT, AN INSULATED METAL DUCT OF REQUIRED LENGTH AND EQUAL DIAMETER SHALL BE INSTALLED WITH AIR SCOOP AND DAMPER AT MAIN DUCT TO REDUCE FLEXIBLE DUCT TO A MAXIMUM LENGTH OF 8 FEET. THE FLEXIBLE DUCT SHALL BE UL 181 RATED. MINIMUM INSTALLED R-VALUE = R-6. 14. PROVIDE SPIN-IN CONE WITH LOCKING DAMPER AT EACH FLEXIBLE DUCT RUN OUT CONNECTING SUPPLY PROVIDE SPIN-IN CONE WITH LOCKING DAMPER AT EACH FLEXIBLE DUCT RUN OUT CONNECTING SUPPLY DUCT TO DIFFUSER. PROVIDE DAMPER EXTENSIONS TO ACCOMMODATE EXTERNAL INSULATION. 15. COORDINATE WITH ALL TRADES INVOLVED. PROVIDE OFFSETS AND TRANSITIONS AROUND OBSTRUCTIONS COORDINATE WITH ALL TRADES INVOLVED. PROVIDE OFFSETS AND TRANSITIONS AROUND OBSTRUCTIONS AT NO ADDITIONAL COST TO THE OWNER. 16. REFER TO TYPICAL DETAILS FOR INSTALLATION OF EQUIPMENT. REFER TO TYPICAL DETAILS FOR INSTALLATION OF EQUIPMENT. 17. REFRIGERANT PIPE IS SIZED IN ACCORDANCE WITH BASIS OF DESIGN MANUFACTURER'S AND ASHRAE'S REFRIGERANT PIPE IS SIZED IN ACCORDANCE WITH BASIS OF DESIGN MANUFACTURER'S AND ASHRAE'S RECOMMENDATIONS. APPROVED ALTERNATE EQUIPMENT SHALL HAVE THE PIPE SIZES REVISED IN ACCORDANCE WITH MANUFACTURER'S AND ASHRAE'S RECOMMENDATIONS. LINE LOSS SHALL NOT EXCEED ONE DEGREE FAHRENHEIT. 18. CONDENSATE DRAIN SHALL BE COPPER OR PVC. CONDENSATE TRAP DEPTH SHALL BE AS SHOWN IN CONDENSATE DRAIN SHALL BE COPPER OR PVC. CONDENSATE TRAP DEPTH SHALL BE AS SHOWN IN DETAIL ON DETAIL SHEET FOR ALL AHU'S & RTU'S. 19. ALL FINISHES DAMAGED OR REMOVED FOR THE INSTALLATION OF WORK SHALL BE REPLACED TO MATCH ALL FINISHES DAMAGED OR REMOVED FOR THE INSTALLATION OF WORK SHALL BE REPLACED TO MATCH ADJACENT FINISHES. 20. ALL PIPE PENTRATIONS THROUGH FIRE WALLS TO BE AIR TIGHT AND SEALED WITH FIRE-PROOF SEALANT. ALL PIPE PENTRATIONS THROUGH FIRE WALLS TO BE AIR TIGHT AND SEALED WITH FIRE-PROOF SEALANT. ALL DUCT PENETRATIONS THROUGH FIRE WALLS TO BE PROVIDED WITH FIRE DAMPERS INSTALLED IN ACCORDANCE WITH NFPA. 21. LOAD CALCULATIONS ARE BASED ON TRANE TRACE COMPUTER PROGRAM. ALL OUTSIDE AIR CALCULATIONS LOAD CALCULATIONS ARE BASED ON TRANE TRACE COMPUTER PROGRAM. ALL OUTSIDE AIR CALCULATIONS ARE BASED ON ASHRAE 62-2010. 22. OUTDOOR DESIGN AMBIENT FOR ALL EQUIPMENT IS 95 DEGREES FdB/ 77 DEGREES FwB IN SUMMER AND OUTDOOR DESIGN AMBIENT FOR ALL EQUIPMENT IS 95 DEGREES FdB/ 77 DEGREES FwB IN SUMMER AND 32 DEGREES FAHRENHEIT IN WINTER. 23. ALL DUCT PENETRATIONS OF THE FLOORS ARE TO BE PROVIDED WITH FIRE DAMPERS AND ACCESS ALL DUCT PENETRATIONS OF THE FLOORS ARE TO BE PROVIDED WITH FIRE DAMPERS AND ACCESS PANELS. ALL PIPE PENETRATIONS OF FLOORS TO BE SEALED WITH UL LISTED INTUMESCENT CAULK. 24. SET ALL HVAC SUPPLY, RETURN, AND EXHAUST SYSTEM AIR FLOW RATE TOLERANCES TO WITHIN PLUS 10 SET ALL HVAC SUPPLY, RETURN, AND EXHAUST SYSTEM AIR FLOW RATE TOLERANCES TO WITHIN PLUS 10 PERCENT (10%) OR MINUS ZERO PERCENT (0%). 25. MECHANICAL CONTRACTOR SHALL COORDINATE ALL ELECTRICAL REQUIREMENTS AND ACCESSORIES WITH MECHANICAL CONTRACTOR SHALL COORDINATE ALL ELECTRICAL REQUIREMENTS AND ACCESSORIES WITH ELECTRICAL CONTRACTOR PRIOR TO PURCHASE AND INSTALLATION AND SHALL BRING ANY DISCREPANCIES TO THE ATTENTION OF ENGINEER.

AutoCAD SHX Text

MARK

AutoCAD SHX Text

LOCATION

AutoCAD SHX Text

SYSTEM AND/OR SERVICE

AutoCAD SHX Text

TYPE UNIT

AutoCAD SHX Text

FLOW EACH PUMP

AutoCAD SHX Text

DISCHARGE PRESSURE

AutoCAD SHX Text

MIN RECEIVER SIZE

AutoCAD SHX Text

MOTOR

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

NOMINAL POWER EACH

AutoCAD SHX Text

PHASE

AutoCAD SHX Text

VOLT

AutoCAD SHX Text

RPM

AutoCAD SHX Text

GPM

AutoCAD SHX Text

PSIG

AutoCAD SHX Text

GAL

AutoCAD SHX Text

HP

AutoCAD SHX Text

CP-1

AutoCAD SHX Text

MECH ROOM, GB-0403

AutoCAD SHX Text

BLDG STEAM

AutoCAD SHX Text

DUPLEX

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3/4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 1, 2

AutoCAD SHX Text

TOTAL FLOW

AutoCAD SHX Text

FIRE DAMPER

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text N/A

AutoCAD SHX Text NOTE 1. PROVIDE NON-RESETTABLE HOUR METER TO LOG RUN TIME OF EACH PUMP. PROVIDE NON-RESETTABLE HOUR METER TO LOG RUN TIME OF EACH PUMP. 2. VERIFY PUMPED CONDENSATE PRESSURE PRIOR TO PURCHASE.VERIFY PUMPED CONDENSATE PRESSURE PRIOR TO PURCHASE.

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

AIRFLOW (CFM)

AutoCAD SHX Text

SIZE (INCHES)

AutoCAD SHX Text

LINKED TO

AutoCAD SHX Text

UNIT NO.

AutoCAD SHX Text

AVT4224-17-I

AutoCAD SHX Text 0.15

AutoCAD SHX Text 12X24

AutoCAD SHX Text

RAV-1-1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

RAV-1-2

AutoCAD SHX Text

RAV-1-3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 0.05

AutoCAD SHX Text 0.1

AutoCAD SHX Text 0.1

AutoCAD SHX Text

AutoCAD SHX Text

RAV-1-4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

EAV-1-1

AutoCAD SHX Text

AutoCAD SHX Text 0.05

AutoCAD SHX Text

RETURN AND EXHAUST AIR VALVE SCHEDULE

AutoCAD SHX Text

MAX. PRESSURE DROP (IN. W.G.)

AutoCAD SHX Text

NOTES

AutoCAD SHX Text NOTES: 1. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. 2. PROVIDE FACTORY INSTALLED DISCONNECT. PROVIDE FACTORY INSTALLED DISCONNECT. 3. NEW CONTROLS SHALL BE COMPATIBLE AND INTEROPERABLE WITH THE EXISTING SYSTEM. ALL GRAPHICS ARE TO BE UPDATED FOR THESE REVISIONS.NEW CONTROLS SHALL BE COMPATIBLE AND INTEROPERABLE WITH THE EXISTING SYSTEM. ALL GRAPHICS ARE TO BE UPDATED FOR THESE REVISIONS.

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

CAV-1-1 & CAV-1-4

AutoCAD SHX Text

CAV1-6

AutoCAD SHX Text

CAV1-6

AutoCAD SHX Text

CAV1-6

AutoCAD SHX Text

CAV1-4

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

AVT4212-17-I

AutoCAD SHX Text

AVT4212-17-I

AutoCAD SHX Text

AVT4212-17-I

AutoCAD SHX Text

AVT4210-17-I

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

EAV-1-2

AutoCAD SHX Text 0.05

AutoCAD SHX Text 1, 2, 3

AutoCAD SHX Text

CAV1-6

AutoCAD SHX Text

ACCUTROL

AutoCAD SHX Text

AVT4210-17-I

AutoCAD SHX Text NOTES: 1. NC VALUES SCHEDULED ARE DISCHARGE RATINGS WITH AN INLET TO DISCHARGE STATIC PRESSURE DIFFERENCE OF 0.50"w.g. MANUFACTURERS OTHER THAN THE BASIS OF DESIGN MUST BE WITHIN 1dB OF ALL DISCHARGE AND RADIATION SOUND POWER VALUES CATALOGUED BY THE NC VALUES SCHEDULED ARE DISCHARGE RATINGS WITH AN INLET TO DISCHARGE STATIC PRESSURE DIFFERENCE OF 0.50"w.g. MANUFACTURERS OTHER THAN THE BASIS OF DESIGN MUST BE WITHIN 1dB OF ALL DISCHARGE AND RADIATION SOUND POWER VALUES CATALOGUED BY THE MANUFACTURER OF THE BASIS OF DESIGN OR ADDITIONAL ATTENUATION MUST BE FURNISHED. 2. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. SEE FLOOR PLANS FOR PROPOSED CONTROL PANEL LOCATION. CONTROLS FOR A COMPLETE AND OPERABLE SYSTEM SHALL BE PROVIDED AND INSTALLED BY CONTROLS CONTRACTOR. SEE FLOOR PLANS FOR PROPOSED CONTROL PANEL LOCATION. 3. ACCEPTABLE ALTERNATE MANUFACTURER IS PHOENIX CONTROLS.ACCEPTABLE ALTERNATE MANUFACTURER IS PHOENIX CONTROLS.

AutoCAD SHX Text

STEAM CONDENSATE PUMP SCHEDULE

AutoCAD SHX Text Drawing Title

AutoCAD SHX Text Approved: Project Director

AutoCAD SHX Text Project Title

AutoCAD SHX Text Date

AutoCAD SHX Text Location

AutoCAD SHX Text Checked

AutoCAD SHX Text Building Number

AutoCAD SHX Text Project Number

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text Drawn

AutoCAD SHX Text Dwg. of

AutoCAD SHX Text

CONSULTANTS:

AutoCAD SHX Text

JAMES A. HALEY VETERANS' HOSPITAL

AutoCAD SHX Text

ARCHITECT/ENGINEERS:

AutoCAD SHX Text

SPECIALTY TREATMENT EXPANSION

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text one quarter inch = one foot

AutoCAD SHX Text

VA FORM 08-6231

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text Office of Construction and Facilities Management

AutoCAD SHX Text

PROJECT- BUILDING #1

AutoCAD SHX Text

REVISION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

SL

AutoCAD SHX Text

JB

AutoCAD SHX Text 100%%% Submittal

AutoCAD SHX Text 04/06/18

AutoCAD SHX Text Construction Set Submittal

AutoCAD SHX Text 05/25/18

AutoCAD SHX Text Bid Submittal per VA Comments

AutoCAD SHX Text 01/27/20

AutoCAD SHX Text 05/25/18

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text Revisions to Meet Current Requirements

AutoCAD SHX Text 01/18/21

AutoCAD SHX Text Physical and Electrical Security Update

AutoCAD SHX Text 08/19/22

AutoCAD SHX Text

MECHANICAL LEGEND, NOTES, AND SCHEDULES

AutoCAD SHX Text

MH101

AutoCAD SHX Text

LICENSE NO. 36120

ttv architects, inc.

115 EAST FORSYTH ST

JACKSONVILLE, FLORIDA 32202

T 904.798.8333 F 904.798.8335 www.ttvarch.com

FL Lic#AA0002609

HADDAD ENGINEERING INC.

3030 HARTLEY ROAD SUITE #290

JACKSONVILLE, FL 32257

T 904.262.5066 F 904.262.7139 www.haddadeng.com

CERTIFICATE OF AUTHORIZATION NO. 4000

08-19-22 PHYSICAL AND ELECTRICAL SECURITY UPDATE

AutoCAD SHX Text

OR SPIN-IN BENEATH THE

AutoCAD SHX Text

TO NECK OF AIR DEVICE

AutoCAD SHX Text

CLAMP NEOPRENE SLEEVE

AutoCAD SHX Text

INSULATE BACK

AutoCAD SHX Text

INSULATION OF FLEXIBLE DUCT

AutoCAD SHX Text

INSULATED FLEXIBLE

AutoCAD SHX Text

OF DIFFUSER

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

SUPPLY DIFFUSER DETAIL

AutoCAD SHX Text

CEILING

AutoCAD SHX Text NOTE: WHEN RUNOUT LENGTH EXCEEDS 6 FEET, USE METAL DUCT TO LIMIT FLEX TO 6'-0" IN LENGTH.

AutoCAD SHX Text

DAMPER & AIR SCOOP

AutoCAD SHX Text

SPIN-IN W/VOLUME

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

DAMPER: 24 GAGE GALVANIZED STEEL

AutoCAD SHX Text

COLLAR SCOOP: 26 GAGE GALVANIZED STEEL

AutoCAD SHX Text

%%UMETAL:

AutoCAD SHX Text

SEE TABLE

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

PLACES APROX.

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text

SEE DRAWING

AutoCAD SHX Text

LENGTH

AutoCAD SHX Text

DIA.

AutoCAD SHX Text

18 IN

AutoCAD SHX Text

14 IN

AutoCAD SHX Text

12 IN

AutoCAD SHX Text

16 IN

AutoCAD SHX Text

8 IN

AutoCAD SHX Text

9 IN

AutoCAD SHX Text

10 IN

AutoCAD SHX Text

5 IN

AutoCAD SHX Text

7 IN

AutoCAD SHX Text

6 IN

AutoCAD SHX Text

SPOT WELD 5

AutoCAD SHX Text

SPOT WELD

AutoCAD SHX Text

BOTH SIDES

AutoCAD SHX Text

DIA.

AutoCAD SHX Text

4 IN

AutoCAD SHX Text

18 IN

AutoCAD SHX Text

14 IN

AutoCAD SHX Text

16 IN

AutoCAD SHX Text

12 IN

AutoCAD SHX Text

9 IN

AutoCAD SHX Text

10 IN

AutoCAD SHX Text

8 IN

AutoCAD SHX Text

6 IN

AutoCAD SHX Text

7 IN

AutoCAD SHX Text

5 IN

AutoCAD SHX Text

4 IN

AutoCAD SHX Text

SPIN-IN COLLAR DETAILS

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

LOW PRESSURE DUCT FITTINGS

AutoCAD SHX Text

APPROVED

AutoCAD SHX Text

EQUAL.

AutoCAD SHX Text

DUCT INSULATION

AutoCAD SHX Text

SCREW CAP

AutoCAD SHX Text

BASE GSKT.

AutoCAD SHX Text

(WHEN REQUIRED)

AutoCAD SHX Text

VENT LOCK NO.

AutoCAD SHX Text

699 INSTR.

AutoCAD SHX Text

TEST HOLE OR

AutoCAD SHX Text

SPLITTER DAMPER

AutoCAD SHX Text 1/8"%%C

AutoCAD SHX Text

TEST

AutoCAD SHX Text

HOLE

AutoCAD SHX Text

INSTRUMENT

AutoCAD SHX Text

24" MIN.

AutoCAD SHX Text

TEST HOLE

AutoCAD SHX Text

DEVICE

AutoCAD SHX Text

SPLITTER

AutoCAD SHX Text

W/LOCKING

AutoCAD SHX Text

%%USPLITTER, BRANCH TAKE-OFF

AutoCAD SHX Text

TOP OF DUCT

AutoCAD SHX Text

%%UINSTRUMENT TEST HOLE

AutoCAD SHX Text

INSIDE WALL OF DUCT

AutoCAD SHX Text

CONSTANT AIR VOLUME TERMINAL

AutoCAD SHX Text

SUPPORT CAV TERMINAL INDEPENDENTLY OF DUCTWORK WITH VIBRATION ISOLATORS

AutoCAD SHX Text

INSULATE VAV OR ANY PORTIONS OF VAV TERMINAL IF NOT FACTORY LINED OR INSULATED.

AutoCAD SHX Text

MINIMUM 6" STRAIGHT DUCT FROM END

AutoCAD SHX Text

OF SHEET METAL TO FIRST BEND

AutoCAD SHX Text

CENTERLINE RADIUS

AutoCAD SHX Text

BENDS SHALL BE

AutoCAD SHX Text

INSULATE DUCT COLLARS OF VAV TERMINAL.

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text 1.

AutoCAD SHX Text 2.

AutoCAD SHX Text 3.

AutoCAD SHX Text

FLEX DUCT SIZE TO MATCH

AutoCAD SHX Text

TERMINAL INLET UNLESS

AutoCAD SHX Text

OTHERWISE NOTED ON PLANS.

AutoCAD SHX Text

SUPPLY

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

EXTERNALLY

AutoCAD SHX Text

INSULATE

AutoCAD SHX Text

MINIMUM 3 DIAMETERS OF

AutoCAD SHX Text

STRAIGHT FLEX DUCT

AutoCAD SHX Text

UPSTREAM OF TERMINAL

AutoCAD SHX Text

MADE WITH NOT

AutoCAD SHX Text

LESS THAN 1

AutoCAD SHX Text

DUCT DIAMETER

AutoCAD SHX Text

FLEX DUCT

AutoCAD SHX Text

CAV BOX

AutoCAD SHX Text

PROVIDE SHEET METAL

AutoCAD SHX Text

TRANSITION TO INLET

AutoCAD SHX Text

IF FLEX DUCT SIZE IS

AutoCAD SHX Text

DIFFERENT THAN TERMINAL

AutoCAD SHX Text

INLET

AutoCAD SHX Text

WITH GROUND STRAP

AutoCAD SHX Text

FLEXIBLE CONNECTOR

AutoCAD SHX Text

AIR

AutoCAD SHX Text

FLOW

AutoCAD SHX Text

EXTERNALLY INSULATE

AutoCAD SHX Text

CONICAL TAP FITTING

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

GREATER THAN 12"

AutoCAD SHX Text

WALL

AutoCAD SHX Text

DUCT

AutoCAD SHX Text

AIR FLOW

AutoCAD SHX Text

SPLITTER

AutoCAD SHX Text

DAMPER

AutoCAD SHX Text

AIR FLOW

AutoCAD SHX Text

WORM GEAR OR

AutoCAD SHX Text

CONTROL

AutoCAD SHX Text

WALL

AutoCAD SHX Text

PIN & HINGE

AutoCAD SHX Text

AIR EXTRACTOR

AutoCAD SHX Text

SIDEWALL REGISTER DETAIL

AutoCAD SHX Text

UTILIZE SPLITTER DAMPER.

AutoCAD SHX Text

WHEN DIMENSION > 12"

AutoCAD SHX Text

UTILIZE EXTRACTOR AT DUCT

AutoCAD SHX Text

TAP TO REGISTER.

AutoCAD SHX Text

WHEN DIMENSION < 12"

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

DUCT BRANCH DETAIL

AutoCAD SHX Text

RECTANGULAR

AutoCAD SHX Text

BRANCH DUCT

AutoCAD SHX Text

DEVICE

AutoCAD SHX Text

MAIN DUCT

AutoCAD SHX Text

AIR FLOW

AutoCAD SHX Text

(EITHER DIRECTION)

AutoCAD SHX Text

OPPOSED BLADE VOLUME

AutoCAD SHX Text

DAMPER WITH LOCKING

AutoCAD SHX Text

QUADRANT AND INSULATION

AutoCAD SHX Text

STAND-OFF

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MH101

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

ROOM AIR CHANGES / PRESSURIZATION SCHEDULE

AutoCAD SHX Text

ROOM NAME AND NUMBER

AutoCAD SHX Text

GB-043 TEL/DATA

AutoCAD SHX Text

GB-044 MECH/ELEC

AutoCAD SHX Text

GB-060 RESTROOM

AutoCAD SHX Text

CO-23-1 HALL

AutoCAD SHX Text

MINIMUM ACH

AutoCAD SHX Text

PRESSURIZATION

AutoCAD SHX Text

AutoCAD SHX Text 2.5

AutoCAD SHX Text

AutoCAD SHX Text 11.7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 9.5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

REQUIRED

AutoCAD SHX Text

ACH PROVIDED

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

GB-040 WAITING

AutoCAD SHX Text

CO-22-1 HALL

AutoCAD SHX Text

GB-047 DIRTY

AutoCAD SHX Text

GB-048 PXYIS

AutoCAD SHX Text

GB-059 RESTROOM

AutoCAD SHX Text

GB-066 HAC

AutoCAD SHX Text

GB-068 MED PREP

AutoCAD SHX Text

GB-046 CLEAN

AutoCAD SHX Text

GB-045 EQUIP STORAGE

AutoCAD SHX Text

GB-067 RESTROOM

AutoCAD SHX Text

GB-069 LOCKER

AutoCAD SHX Text

GB-070 CHANGING

AutoCAD SHX Text

GB-058 EXAM 1

AutoCAD SHX Text

GB-056 OFFICE 2

AutoCAD SHX Text

GB-072 NURSES

AutoCAD SHX Text

GB-055 OFFICE 3

AutoCAD SHX Text

GB-057 OFFICE 1

AutoCAD SHX Text

GB-053 MINOR PROCEDURE 2

AutoCAD SHX Text

GB-051 CONFERENCE

AutoCAD SHX Text

ROOM AIR CHANGES / PRESSURIZATION SCHEDULE

AutoCAD SHX Text

ROOM NAME AND NUMBER

AutoCAD SHX Text

IB-06 EQUIP

AutoCAD SHX Text

IB-07 EQUIP ROOM

AutoCAD SHX Text

1B-02 BI-PLANE IR PROCEDURE

AutoCAD SHX Text

1B-04 SCRUB AREA

AutoCAD SHX Text

1B-08 SINGLE PLANE IR PROCEDURE

AutoCAD SHX Text

1B-02A EQUIP ROOM

AutoCAD SHX Text

1B-03 IRMS

AutoCAD SHX Text

1B-05 CONTROL ROOM

AutoCAD SHX Text

1B-021 CLEAN

AutoCAD SHX Text

1B-017 CONSULT

AutoCAD SHX Text

1B-013 HOLDING ROOM

AutoCAD SHX Text

1B-014 RESTROOM

AutoCAD SHX Text

1B-015 RESTROOM

AutoCAD SHX Text

1B-016 STAFF RESTROOM

AutoCAD SHX Text

1B-020 TEAM ROOM

AutoCAD SHX Text

1B-012 HOLDING

AutoCAD SHX Text

1B-018 OFFICE

AutoCAD SHX Text

C1-61-1 HALL

AutoCAD SHX Text

1B-010 HOLDING ROOM

AutoCAD SHX Text

1B-011 HOLDING ROOM

AutoCAD SHX Text

1B-019 EQUIP STORAGE

AutoCAD SHX Text

CO-24-1 HALL

AutoCAD SHX Text

CO-25-1 HALL

AutoCAD SHX Text

GB-061 EXAM 2

AutoCAD SHX Text

GB-062 EXAM 3

AutoCAD SHX Text

GB-063 EXAM 4

AutoCAD SHX Text

GB-049 OFFICE 5

AutoCAD SHX Text

GB-050 OFFICE 4

AutoCAD SHX Text

GB-054 MINOR PROCEDURE

AutoCAD SHX Text

GB-065 WOUND TREATMENT 2

AutoCAD SHX Text

GB-071 WOUND TREATMENT

AutoCAD SHX Text

1B-023 NURSE

AutoCAD SHX Text 1B-024

AutoCAD SHX Text

1B-09 HOLDING ROOM

AutoCAD SHX Text

C1-60-1 HALL

AutoCAD SHX Text

C1-62-1 HALL

AutoCAD SHX Text

C1-63-1 HALL

AutoCAD SHX Text

AutoCAD SHX Text 4.2

AutoCAD SHX Text

AutoCAD SHX Text 4.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.6

AutoCAD SHX Text

AutoCAD SHX Text 4.4

AutoCAD SHX Text

AutoCAD SHX Text 7.4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 11.4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 10.1

AutoCAD SHX Text

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 8.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6.2

AutoCAD SHX Text

AutoCAD SHX Text 6.1

AutoCAD SHX Text

AutoCAD SHX Text 6.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text 4.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.3

AutoCAD SHX Text

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text 5.5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 15.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 15.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 12.5

AutoCAD SHX Text

AutoCAD SHX Text 171.1

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6.1

AutoCAD SHX Text

AutoCAD SHX Text 124.5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 15.3

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 5.4

AutoCAD SHX Text

AutoCAD SHX Text 8.7

AutoCAD SHX Text

AutoCAD SHX Text 6.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 9.9

AutoCAD SHX Text

AutoCAD SHX Text 10.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 10.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.3

AutoCAD SHX Text

AutoCAD SHX Text 6.7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6.2

AutoCAD SHX Text

AutoCAD SHX Text 6.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.5

AutoCAD SHX Text

AutoCAD SHX Text 9.2

AutoCAD SHX Text

AutoCAD SHX Text 11.7

AutoCAD SHX Text

AutoCAD SHX Text 6.2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 4.9

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3.7

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

MINIMUM ACH

AutoCAD SHX Text

PRESSURIZATION

AutoCAD SHX Text

REQUIRED

AutoCAD SHX Text

ACH PROVIDED

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

ROOF CENTRIFUGAL EXHAUST FAN DETAIL

AutoCAD SHX Text

ATTACH FAN TO CURB

AutoCAD SHX Text

ROOF CONSTRUCTION

AutoCAD SHX Text

ELECTRICAL DISCONNECT

AutoCAD SHX Text

DIRECT DRIVE MOTOR

AutoCAD SHX Text

BELT OR

AutoCAD SHX Text

FLASHING

AutoCAD SHX Text

DAMPER

AutoCAD SHX Text

GASKET

AutoCAD SHX Text

CONNECT DUCT

AutoCAD SHX Text

BACKDRAFT

AutoCAD SHX Text

RUBBER CURB

AutoCAD SHX Text

FOR ACCESS TO

AutoCAD SHX Text

REMOVABLE COVER

AutoCAD SHX Text

VENTILATED MOTOR

AutoCAD SHX Text

MOTOR

AutoCAD SHX Text

COMPARTMENT

AutoCAD SHX Text

NEW CURB - SEE ARCHITECTURAL DRAWINGS FOR INSTALLATION DETAILS.

AutoCAD SHX Text

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MH101

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

RL-4F

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text

EXPANSION TANK SCHEDULE

AutoCAD SHX Text

AIR SEPARATOR SCHEDULE

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

UNIT DESIGNATION

AutoCAD SHX Text

PIPE SIZE

AutoCAD SHX Text

MAX. FLOW RATE (GPM)

AutoCAD SHX Text

MAX. PRESS. DROP (FT. W.G.)

AutoCAD SHX Text

UNIT DESIGNATION

AutoCAD SHX Text

MIN/MAX TEMPERATURE (F)

AutoCAD SHX Text

MIN/MAX PRESSURE (PSI)

AutoCAD SHX Text

SYSTEM VOLUME (GALLONS)

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AS-1-CW

AutoCAD SHX Text 4"

AutoCAD SHX Text

B-35LA

AutoCAD SHX Text 45/60

AutoCAD SHX Text 17/25

AutoCAD SHX Text

AutoCAD SHX Text

ET-1-CW

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

CHILLED WATER

AutoCAD SHX Text

RL-3N

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AS-2-HW

AutoCAD SHX Text 3"

AutoCAD SHX Text

B-85LA

AutoCAD SHX Text 60/160

AutoCAD SHX Text 55/75

AutoCAD SHX Text

AutoCAD SHX Text

ET-2-HW

AutoCAD SHX Text

HOT WATER

AutoCAD SHX Text

FLASH TANK DETAIL

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

AutoCAD SHX Text

MH101

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

FULL FACE EGGCRATE DETAIL

AutoCAD SHX Text

CEILING

AutoCAD SHX Text

RETURN OR EXHAUST DUCT

AutoCAD SHX Text

INSULATE BACK OF PLENUM

AutoCAD SHX Text

FIELD FABRICATED PLENUM

AutoCAD SHX Text

FULL FACE EGGCRATE

AutoCAD SHX Text

AutoCAD SHX Text

MH101

AutoCAD SHX Text

EXTERNALLY INSULATE DUCT DOWNSTREAM OF TERMINAL

AutoCAD SHX Text

81DAL

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 2

AutoCAD SHX Text

LAY-IN

AutoCAD SHX Text C

AutoCAD SHX Text

FACE SIZE

AutoCAD SHX Text

MARK

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

BORDER TYPE

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

AIR DISTRIBUTION SCHEDULE

AutoCAD SHX Text

LOUVER FACED

AutoCAD SHX Text

DIFFUSER

AutoCAD SHX Text

LAY-IN

AutoCAD SHX Text

ASCDA

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 3

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 3, 4

AutoCAD SHX Text

SEE DWGS.

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text B

AutoCAD SHX Text

SIDEWALL

AutoCAD SHX Text

SUPPLY

AutoCAD SHX Text

22DAL

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 3

AutoCAD SHX Text 24X24

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text E

AutoCAD SHX Text

LFD

AutoCAD SHX Text C1

AutoCAD SHX Text 24X24

AutoCAD SHX Text 12X12

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 3, 4

AutoCAD SHX Text 48X24

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text D

AutoCAD SHX Text

LAMINAR FLOW

AutoCAD SHX Text

DIFFUSER

AutoCAD SHX Text

LFD

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text P-1 & 2

AutoCAD SHX Text

PUMP SCHEDULE

AutoCAD SHX Text

HEAD (FT. W.G.)

AutoCAD SHX Text

FLOW RATE (GPM)

AutoCAD SHX Text

MINIMUM EFFICIENCY (%)

AutoCAD SHX Text

MAXIMUM HORSEPOWER

AutoCAD SHX Text

MAXIMUM SPEED (RPM)

AutoCAD SHX Text

VOLTS/PHASE/HERTZ

AutoCAD SHX Text

UNIT DESIGNATION

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

MOTOR DATA

AutoCAD SHX Text

PUMP DATA:

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

TYPE

AutoCAD SHX Text 460/3/60

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text SERIES e1510-2AD-es

AutoCAD SHX Text 1, 2, 3, 4

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

BASE MOUNTED

AutoCAD SHX Text

AutoCAD SHX Text

CH-1

AutoCAD SHX Text

1. PROVIDE STANDARD SEAL WITH FLUSH LINE.

AutoCAD SHX Text

2. PROVIDE HEAVY DUTY BASE. PUMP TO BE INSTALLED ON INTERTA BASE ON TOP

AutoCAD SHX Text

3. 2ND PUMP IS STAND-BY.

AutoCAD SHX Text

END SUCTION

AutoCAD SHX Text P-3 & 4

AutoCAD SHX Text 460/3/60

AutoCAD SHX Text

BELL & GOSSETT

AutoCAD SHX Text SERIES e1531-1.5AD

AutoCAD SHX Text 1, 2, 3, 4

AutoCAD SHX Text 1 1/2

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

BASE MOUNTED

AutoCAD SHX Text

AutoCAD SHX Text

HX-1

AutoCAD SHX Text

END SUCTION

AutoCAD SHX Text

OF A 6" HIGH HOUSEKEEPING PAD.

AutoCAD SHX Text

4. PROVIDE WITH ABB MODEL ACS350 VFD OR APPROVED EQUIVALENT. PROVIDE WITH

AutoCAD SHX Text

DISCONNECT, BYPASS AND AUXILIARY CONTACTS.

AutoCAD SHX Text

FAN SCHEDULE

AutoCAD SHX Text

VOLTS/PHASE/HERTZ

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text

EXTERNAL S.P. (IN. W.G.)

AutoCAD SHX Text

DRIVE

AutoCAD SHX Text

SPEED (RPM)

AutoCAD SHX Text

MAXIMUM SONES

AutoCAD SHX Text

HP

AutoCAD SHX Text

FAN DATA

AutoCAD SHX Text

TYPE

AutoCAD SHX Text

AIR FLOW (CFM)

AutoCAD SHX Text SERVES (ROOM NO./AHU No.)

AutoCAD SHX Text

UNIT NO.

AutoCAD SHX Text 277/1/60

AutoCAD SHX Text 1, 2, 3, 4

AutoCAD SHX Text

GREENHECK

AutoCAD SHX Text 0.3

AutoCAD SHX Text

DIRECT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

ROOFTOP CENTRIFUGAL

AutoCAD SHX Text

AutoCAD SHX Text

EF-G-1

AutoCAD SHX Text 277/1/60

AutoCAD SHX Text 1, 2, 3, 5

AutoCAD SHX Text

G-163-VG

AutoCAD SHX Text

GREENHECK

AutoCAD SHX Text 0.2

AutoCAD SHX Text

DIRECT

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 3/4

AutoCAD SHX Text

AutoCAD SHX Text

EF-1-1

AutoCAD SHX Text NOTES: 1. PROVIDE BACKDRAFT DAMPER, VIBRATION ISOLATION, AND DISCONNECT. PROVIDE BACKDRAFT DAMPER, VIBRATION ISOLATION, AND DISCONNECT. 2. FANS SHALL BE RATED FOR HIGH WIND, BE PROVIDED WITH TIE DOWNS, AND, FANS SHALL BE RATED FOR HIGH WIND, BE PROVIDED WITH TIE DOWNS, AND, INSULATED ACOUSTICAL ROOF CURB. 3. PROVIDE SOLID STATE CONTROLLER. PROVIDE SOLID STATE CONTROLLER. 4. INTERLOCK WITH AHU-G-1. INTERLOCK WITH AHU-G-1. 5. INTERLOCK WITH RTU-1-1. INTERLOCK WITH RTU-1-1.

AutoCAD SHX Text

ROOFTOP CENTRIFUGAL

AutoCAD SHX Text

047, 059, 060, 066, 067, 069, CO-25-1

AutoCAD SHX Text

02, 08, 014, 015, 016, 024, CT-61-1

AutoCAD SHX Text

PRICE

AutoCAD SHX Text 1, 3

AutoCAD SHX Text

SEE DWGS.

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text G

AutoCAD SHX Text

SIDEWALL

AutoCAD SHX Text

RETURN

AutoCAD SHX Text

AutoCAD SHX Text

RUSKIN

AutoCAD SHX Text

AutoCAD SHX Text 30X30

AutoCAD SHX Text

SURFACE

AutoCAD SHX Text F

AutoCAD SHX Text

LOUVER

AutoCAD SHX Text

ELF6375

AutoCAD SHX Text

LAMINAR FLOW

AutoCAD SHX Text

DIFFUSER

AutoCAD SHX Text NOTES: 1. PROVIDE PROVIDE FACE OPERABLE OPPOSED BLADE DAMPER. PROVIDE PROVIDE FACE OPERABLE OPPOSED BLADE DAMPER. 2. EGGCRATE SHALL BE FULL FACE SIZE. EGGCRATE SHALL BE FULL FACE SIZE. 3. PROVIDE DAMPER AT FITTING OF LOW PRESSURE DUCTWORK. PROVIDE DAMPER AT FITTING OF LOW PRESSURE DUCTWORK. 4. CONTRACTOR TO VERIFY FRAMING DIMENSIONS PRIOR TO RELEASE OF AIR DISTRIBUTION DEVICES. CONTRACTOR TO VERIFY FRAMING DIMENSIONS PRIOR TO RELEASE OF AIR DISTRIBUTION DEVICES. 5. PROVIDE 10" DEEP PLENUM FULL SIZE OF LOUVER. ALSO PROVIDE BLAST SUPPRESSION DAMPER SIMILAR PROVIDE 10" DEEP PLENUM FULL SIZE OF LOUVER. ALSO PROVIDE BLAST SUPPRESSION DAMPER SIMILAR TO RUSKIN MODEL CBS8BL. SEE ARCHITECTURAL DRAWINGS FOR INSTALLATION DETAIL.

AutoCAD SHX Text

G-163-VG

AutoCAD SHX Text A

AutoCAD SHX Text A1

AutoCAD SHX Text 24X24

AutoCAD SHX Text 12X12

AutoCAD SHX Text

CH-1

AutoCAD SHX Text

UNIT DESIGNATION

AutoCAD SHX Text

PROVIDE UNIT MOUNTED STARTER AND DISCONNECT, GROUND FAULT

AutoCAD SHX Text

CONTROL, AND NEMA 4 RATED FLOW SWITCHES.

AutoCAD SHX Text

MINIMUM SYSTEM EFFICIENCY (IPLV-EER/COP)

AutoCAD SHX Text

VOLTS/PHASE/CYCLES

AutoCAD SHX Text

MANUFACTURER

AutoCAD SHX Text 1.

AutoCAD SHX Text

MODEL NO.

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text MAXIMUM INPUT POWER (kW)

AutoCAD SHX Text

MAXIMUM WATER PRESSURE DROP (FT. H20)

AutoCAD SHX Text

AMBIENT AIR TEMPERATURE (F)

AutoCAD SHX Text

LEAVING WATER TEMPERATURE (F)

AutoCAD SHX Text

ENTERING WATER TEMPERATURE (F)

AutoCAD SHX Text

WATER FLOW RATE (GPM-NORMAL/MIN.)

AutoCAD SHX Text

MINIMUM CAPACITY (ACTUAL/NOMINAL)

AutoCAD SHX Text

TYPE

AutoCAD SHX Text 13.1/3.8

AutoCAD SHX Text 460/3/60

AutoCAD SHX Text

CARRIER

AutoCAD SHX Text

30RB-060-6-5

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 55/60

AutoCAD SHX Text 132/75

AutoCAD SHX Text

AIR COOLED SCROLL

AutoCAD SHX Text

AutoCAD SHX Text

CHILLER SCHEDULE

AutoCAD SHX Text

SERVES

AutoCAD SHX Text

SPECIALTY TREATMENT

AutoCAD SHX Text

MINIMUM NO. CAPACITY STEPS

AutoCAD SHX Text

AutoCAD SHX Text

MINIMUM NO. CIRCUITS

AutoCAD SHX Text

AutoCAD SHX Text

A-WEIGHTED SPL AT THE ACOUSTIC CENTER OF THE CHILLER SHALL NOT

AutoCAD SHX Text 2.

AutoCAD SHX Text EXCEED THE 88 dBA.

AutoCAD SHX Text

PROVIDE BACNET CARD IN CHILLER INTERFACE.

AutoCAD SHX Text 3.

AutoCAD SHX Text

FURNISH STORAGE TANK IF CHILLER FURNISHED REQUIRES MORE THAN

AutoCAD SHX Text 4.

AutoCAD SHX Text

DIGITAL SCROLL COMPRESSOR IS ALSO ACCEPTABLE.

AutoCAD SHX Text 5.

AutoCAD SHX Text

290 GALLONS OF WATER IN THE SYSTEM.

AutoCAD SHX Text

CEILING EGGCRATE

AutoCAD SHX Text Drawing Title

AutoCAD SHX Text Approved: Project Director

AutoCAD SHX Text Project Title

AutoCAD SHX Text Date

AutoCAD SHX Text Location

AutoCAD SHX Text Checked

AutoCAD SHX Text Building Number

AutoCAD SHX Text Project Number

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text Drawn

AutoCAD SHX Text Dwg. of

AutoCAD SHX Text

CONSULTANTS:

AutoCAD SHX Text

JAMES A. HALEY VETERANS' HOSPITAL

AutoCAD SHX Text

ARCHITECT/ENGINEERS:

AutoCAD SHX Text

SPECIALTY TREATMENT EXPANSION

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

A…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .