Attachment 6 Med Gas Inventory v8.2.23.xlsx

Out of Compliance

5.1.11.2 Shutoff Valves (p 99-59)

5.1.11.2.4 Source Valves (p 99-60)

Table 5.1.11 on p99-60 for standard color designations & pressures 5.1.11.2.4: "…shall be labeled in substance as follows: SOURCE VALVE FOR THE (SOURCE NAME)" ***Unable to personally complete due to time contraints, but this should be evaluated -Kali 8/3/23 3 Proper Labeling of Main Line Valves 5.1.4.1.3 Labeling (p 99-47)

5.1.11.2.5 Main Line Valves (p 99-60)

Table 5.1.11 on p99-60 for standard color designations & pressures 5.1.11.2.5: "…shall be labeled in substance as follows: MAIN LINE VALVE FOR THE (GAS/VACUUM NAME) SERVING (NAME OF THE BUILDING)" ***Unable to personally complete due to time contraints, but this should be evaluated -Kali 8/3/23 4 Proper Labeling of Riser Valves 5.1.4.1.3 Labeling (p 99-47)

5.1.11.2.6 Riser Valves (p 99-60)

Table 5.1.11 on p99-60 for standard color designations & pressures 5.1.11.2.6: "…shall be labeled in substance as follows: RISER FOR THE (GAS/VACUUM NAME) SERVING (NAME OF THE AREA/BUILDING SERVED BY THE PARTICULAR RISER)" ***Unable to personally complete due to time contraints, but this should be evaluated -Kali 8/3/23 5 Proper Labeling of Service Valves 5.1.4.1.3 Labeling (p 99-47)

5.1.11.2.7 Service Valves (p 99-60)

Table 5.1.11 on p99-60 for standard color designations & pressures 5.1.11.2.7: "…shall be labeled in substance as follows: SERVICE VALVE FOR THE (GAS/VACUUM NAME) SERVING (NAME OF THE AREA/BUILDING SERVED BY THE PARTICULAR VALVE)" ALL AREAS Most of the existing Service Valve (SV) boxes are not labeled for areas serviced and/or labels affixed to the removeable metal covers - full audit & correction should be made for all SV boxes; With panels that do not have a non-removable surface to affix label, a separate solution must be executed (EX: SV boxes without trim around the removable cover will require a plaque/wall-mounted, non-removeable label installed above the box to highlight areas serviced)

6 Proper Labeling of Zone Valve Boxes 5.1.4.1.3 Labeling (p 99-47)

5.1.11.2.8 Service Valves (p 99-60)

5.1.11.4.3: "Where medical gas systems operate at pressures other than the standard gauge pressure... the area alarm panel identification shall include the nonstandard operating pressure in addition to the name of the gas."

5.1.11.1.2: "…operating pressure in addition to the name of the gas shall be labeled" where pressure is not standard 5.1.11.1.3: "...piping in the immediate area of the WAGD systems shall be labeled to indicate both systems."

5.1.11.1.4: "Pipe labels shall be located as follows: (1) At intervals of not more than 6.1m (20ft), (2) At least once in or above every room, (3) On both sides of walls or partitions penetrated by the piping, (4) At least once in every story height traversed by risers" 5.1.11.1.6: "...compressor intakes, vacuum exhausts, and relief valve vent lines shall meet the requirements of 5.1.11.1.1" ***Unable to personally complete due to time contraints, but this should be evaluated -Kali 8/3/23

5.1.4.6.1: "All station outlets/inlets shall be supplied through a zone valve…"

11 Decommissioning A.5.1.14.3.5 (p99-181) "When spaces are converted, the inlets and outlets should be addressed in one of the following ways: (1) Inlets and outlets removed and tubing capped, (2) Inlets and outlets plugged and provided with a blank-off plate, (3) Inlets and outlets remain accessible for maintenance and testing, (4) Other means deemed appropriate by the AHJ.

Proper decommisioning of systems should include identifying them as not in service. The associated zone valve box and alarm panels should be kept up-to-date with the chages made to rooms no longer served."

BLDG1 and 25 1st

BLDG1 2nd