Attachment 4_Kennel Drawings.pdf

This is a complete set of 100% construction documents for the USDA Wildlife Services Utah Kennel Building project located at 4200 S. 600 E. Cache County Road, Millville, UT 84326. The project is designed by Cushing Terrell and includes comprehensive architectural, structural, civil, mechanical, plumbing, and electrical construction drawings.

The kennel building project encompasses approximately 3,389 gross square feet of non-combustible Type II-B construction classified as Agricultural Use (U-Occupancy). The facility includes two kennels (Kennel A and B, each approximately 1,388-1,389 square feet), a mechanical room (180 square feet), and a mud room (177 square feet). The building features radiant floor heating with concrete slabs on grade, eight-inch concrete masonry unit exterior walls, a metal roof system with translucent panels, and a prefabricated metal building structural frame. Key systems include a 285 MBH condensing boiler serving radiant floor heating circuits, hydronic piping with glycol feeder system, ceiling fans for ventilation, LED lighting with occupancy sensors, and emergency lighting. The project incorporates trench drains, plumbing fixtures including floor sinks and hose bibbs, and a complete electrical infrastructure with 200-amp main service and distributed receptacles. Construction involves site work including concrete pads, gravel roadways, utility connections (water, gas, sanitary sewer), erosion control measures, and coordination with existing site infrastructure. The documents are dated September 29, 2025, and include detailed specifications, schedules, and notes addressing structural, mechanical, plumbing, electrical, and civil design requirements per 2021 IBC and applicable codes.