Attachment 3 System Architecture and Topology Description.pdf

ATTACHMENT 3: SYSTEM ARCHITECTURE & TOPOLOGY

DESCRIPTION

Solicitation Number: W91247-26-Q-1CD5

Document Type: Technical Architecture Exhibit

1. Functional System Overview The Fort Bragg Primary Crash Alarm Network (PCN) and Secondary Crash Alarm Network (SCN) consist of three (3) physically independent airfield deployments at Simmons Army Airfield (SAAF), Mackall Army Airfield (MAAF), and Pope Army Airfield (PAAF).

Each airfield deployment connects the Air Traffic Control (ATC) Tower, Base Operations, Fire Station Dispatch, Medical/Rescue, and outlying emergency endpoints over an isolated Layer 2 Virtual Local Area Network (VLAN) provided as a Government-Furnished Service (GFS) by the Fort Bragg Network Enterprise Center

(NEC).

The contractor shall de-install the currently existing system, equipment, and peripheral devices in all three towers, and dispose of them accordingly with all pertinent laws and regulations, and install the new equipment and system and provide maintenance and support according to the SOW.

| FORT BRAGG NEC LAYER 2 NETWORK |

| (Isolated Emergency VLAN) | v v

| SIMMONS AAF NET | | MACKALL AAF NET | | POPE AAF NET |

| Core Server & Switch | | Primary/Standby Svr | | Core Svr & Sw | | (11 PoE Switches) | | (8 PoE Switches) | | (9 PoE Switches) | v v v | Simmons Endpoints | | Mackall Endpoints | | Pope Endpoints | | • SAAF ATC Tower | | • MAAF ATC Tower | | • PAAF ATC Tower | | • SAAF Base Ops | | • MAAF Base Ops | | • PAAF AMOPS | | • Crash Station #2 | | • Crash Station #4 | | • Crash Sta #7 | | • MEDEVAC (P8944) | | • Crash Station #9 | | • Byars Clinic | | • Provost Marshall | | • TMC 14 | | • Command Post | | • Fort Bragg Ops | | • UAS Facility | | • MOCC (B900) | | • Weather / Safety | | • Versar (AVN Fuel) | | • Alt Cmd Post | | • Amentum / Versar | | • Weather | | • RAS / Weather | | • 82 SDO | | • E911 Vesta | | • E911 Vesta | | • E911 Vesta | *** The minimum requirements for notification are as follows:

Initiating the Crash Alert

Primary Crash Initiation in the tower

Crash Rescue

MEDEVAC

911/E911 Fire Station

Notifying Air Traffic Control Chief

***Note: Local Regulatory Authority & Supplemental Requirements (AR 95- 2): In accordance with Army Regulation (AR) 95-2 (Aviation: Air Traffic Control, Airfield Operations, Airspace, and Range Services), local airfield operational authorities and facility managers retain explicit authority to establish supplemental technical and operational requirements necessary to maintain airfield safety of flight and emergency readiness. All contractor-provided hardware, installation practices, and network configurations must fully satisfy these local airfield supplemental standards as directed by the Fort Bragg DPTMS Airfield Division and NAVAIDs Branch.

2. Comprehensive Airfield Network Topology & Endpoint Schedule

A. Simmons Army Airfield (SAAF) Topology Details

• Central Equipment Location: Main Chassis & Core Fiber Switch (Extreme 5420F-24S-4XE) housed in 7th Floor ATC Tower Comm Room (or 1st Floor Comm Closet) in dedicated rack space.

• Network & Power Isolation: Dedicated rack/wall cabinet, black Cat6 patch cables, local 1.5kVA UPS.

• Connected Buildings & Endpoints:

1. Building P4343 (Simmons ATC Tower Cab): Primary Crash Initiator, Touchscreen GUI Console, Cisco 8841 IP Phone w/ PTT handset, Cisco C9200CX PoE Switch.

2. Building P4541 (Simmons Base Operations): Alternate Initiator, Touchscreen GUI Console, PCN & SCN IP Phones w/ PTT handset, Cisco C9200CX PoE Switch.

3. Building P4541 (ATC Chief & Safety Offices): PCN & SCN IP Phones, Cisco C9200CX PoE Switch.

4. Building P4539 (Crash Station #2): PCN & SCN IP Phones, Bogen PA Amplifier UTI Interface Module via Analog Adapter, Cisco C9200CX PoE Switch.

5. Building P8944 (MEDEVAC Dispatch): PCN IP Phone, Weather Alert IP Phone, Cisco C9200CX PoE Switch.

6. Building 2-5634 (Fort Bragg Provost Marshall / Military Police): SCN IP Phone, Cisco C9200CX PoE Switch.

7. Building 1-1326 (Fort Bragg Operations Center - FBOC): SCN IP Phone, Cisco C9200CX PoE Switch.

8. Building P3642 (Amentum / AFMB): Weather Alert IP Phone, Cisco C9200CX PoE Switch.

9. Building P6823 (Versar / AVN Fuel): Weather Alert IP Phone, Cisco C9200CX PoE Switch.

10. Building M1815 (82nd Airborne Staff Duty Officer - SDO): Weather Alert IP Phone, Cisco C9200CX PoE Switch.

11. Building 2-5935 (Fort Bragg E911 Vesta Dispatch): Vesta Dispatch Server SIP / FXO Trunk Link.

B. Mackall Army Airfield (MAAF) Topology Details

• Central Equipment Location: Primary & Backup Redundant Chassis & Core Fiber Switch (Extreme 5420F-24S-4XE) housed in 1st Floor ATC Tower Comm Room cabinet.

• Network & Power Isolation: Dedicated enclosure, black Cat6 patch cables, local 1.5kVA UPS.

• Connected Buildings & Endpoints:

12. Building T2767 (Mackall ATC Tower Cab): Primary Crash Initiator, Touchscreen GUI Console, Cisco 8841 IP Phone w/ PTT handset, Cisco C9200CX PoE Switch.

13. Building T2767 (ATC Facility Chief): PCN IP Phone.

14. Building T2462 (Mackall Base Operations): Initiator, Touchscreen GUI

Console, PCN & SCN IP Phones w/ PTT handset, Cisco C9200CX PoE Switch.

15. Building T2766 (Crash Station #4): PCN & SCN IP Phones, PA Amplifier

Line Interface, Cisco C9200CX PoE Switch.

16. Building T2725 (Crash Station #9): SCN IP Phone, Cisco C9200CX PoE

Switch.

17. Building T3358 (TMC 14): PCN & SCN IP Phones, Cisco C9200CX PoE

Switch.

18. Building T6200 (UAS Facility): Weather Alert IP Phone, Cisco C9200CX PoE

Switch.

19. Building T2462 (Versar / AVN Fuel): Weather Alert IP Phone, Cisco

C9200CX PoE Switch.

20. Building 2-5935 (Fort Bragg E911 Vesta Dispatch): Vesta Dispatch Server

C. Pope Army Airfield (PAAF) Topology Details

• Central Equipment Location: Main Chassis & Core Fiber Switch (Extreme 5420F-24S-4XE) housed in the 7th Floor ATC Tower Comm Room in dedicated rack space.

• Network & Power Isolation: Dedicated 2-post/wall cabinet, black Cat6 patch cables, local 1.5kVA UPS/PDU.

• Connected Buildings & Endpoints:

21. Pope ATC Tower (7th Floor Comm Room & Cab): Primary Crash Initiator, Touchscreen GUI Console, Cisco 8841 IP Phone w/ PTT handset, Voice Recorder Interface, Cisco C9200CX PoE Switch.

22. Building 758 (Pope AMOPS / Airfield Management): Initiator, Touchscreen GUI Console, PCN & SCN IP Phones w/ PTT handset, Cisco C9200CX PoE Switch.

23. Building 758 (Pope Safety Office): SCN Emergency IP Phone.

24. Building 758 (Pope Weather Office): SCN Emergency IP Phone.

25. Building O-0250 (Crash Station #7): PCN Emergency IP Phone, PA

Amplifier Line Interface, Cisco C9200CX PoE Switch.

26. Building 2-1959 (Byars Medical Clinic): PCN Emergency IP Phone, Cisco

C9200CX PoE Switch.

27. Building 900 (Pope Command Post): SCN Emergency IP Phone, Cisco

C9200CX PoE Switch.

28. Building 900 (MOCC - Maintenance Operations Control Center): SCN

Emergency IP Phone.

29. Building 309 (Alternate Command Post): SCN Emergency IP Phone, Cisco

C9200CX PoE Switch.

30. Building O-0378 (RAS - Radar Approach Station): SCN Emergency IP

Phone, Cisco C9200CX PoE Switch.

31. Building 2-5935 (Fort Bragg E911 Vesta Dispatch): Vesta Dispatch Server

3. General Installation & Connectivity Mandates

32. Black Patch Cable Standard: All copper interconnections between NEC Layer 2 handoff ports, crash phone PoE switches, and patch panels MUST use black Cat6 patch cords.

33. Dedicated Hardware Housing: No crash phone hardware (servers or switches) may be installed inside government NEC voice/data racks. All equipment must be mounted in dedicated contractor-supplied or government-furnished isolated cabinets.

34. Power Continuity: All core servers and peripheral PoE switches must plug into dedicated Uninterruptible Power Supply (UPS) units to prevent VoIP phone reboot cycles during airfield generator cutovers.

3. General Installation & Connectivity Mandates