Attachment 3 - Specifications.pdf
PDF 1022 KB Posted
- Attached to
- Hydraulic Paper Cutter Purchase and Maintenance
- Solicitation number
- SP700025Q10510001
- Issued by
-
Defense Logistics Agency
About this file
This document is a specifications attachment for a 37" Hydraulic Programmable Paper Cutter with an air table and touch screen. The paper cutter features a maximum cutting width of 37", maximum cut depth of 40", and a hydraulic and manual clamping method with a maximum clamping force of 7000 lbs. Key features include a power soft clamp, air table, digital hand wheel, and automatic false clamp detection, along with safety features like light safety curtains and two-hand timed non-repeat cut buttons.
The specifications also detail warranty and maintenance requirements. The equipment comes with a one-year manufacturer's warranty covering parts, labor, and travel time, with on-site service typically by the next business day. The contractor must provide additional post-warranty options for one, two, and five years. Maintenance includes four years of monthly service, with an 8-hour response time for remote or on-site diagnosis, and coverage from 8:00 am to 5:00 pm local time. The service must include a technician calling the primary operator within 30 minutes of a service call to discuss the issue and expected arrival time.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
37” Hydraulic Programmable Paper Cutter w/ Air Table, and Touch Screen
Paper Cutter Specifications Maximum Cutting Width: 37″ / 94cm Maximum Cut Depth: 40″/ 102cm Minimum Cut: without false clamp plate 3/4″ / 19mm : with false clamp plate 2-5/8″ / 6.7cm Clamp Opening: without false clamp plate 5-1/8″ / 13cm : with false clamp plate 4-7/8″ / 12.4cm Clamping Method Hydraulic and Manual Maximum Clamping Force 7000 lbs / 3100 daN Back-gauge Control Power
DIMENSIONS
Table Space: in front of knife 25″ / 63.5cm : behind knife 40″ / 102cm Table Height 36″ / 92cm Overall Height 60″ / 153cm Overall Width (with side tables) 109″ / 277cm Overall Width (without side tables) 63-1/2″ / 162cm Overall Length 86-1/4″ / 219cm Mounting Dimension 36″ / 91.4cm Door Pass-through: assembled 63-1/2″ / 162cm with table/treadle removed 35″ / 89cm
FEATURES to reduce operator fatigue and maximize productivity:
Power soft clamp Air table Digital hand wheel Automatic false clamp detection
SAFETY FEATURES associated with UL and CE certification:
Light safety curtains Enclosed rear table Two-hand timed non-repeat cut buttons Knife safety latch.
CONTROLLER COLOR TOUCH-SCREEN:
Variable mode data entry, Automatic fraction to decimal calculation Unlimited program storage capacity.
Programmable electronic clamp pressure control per cut.
Program creation through features such as:
o repeat and loop commands, o label cutting o sheet division tools
SP7000-25-Q-1051 Attachment 3 – SPECIFICATIONS 1
Warranty: One (1) Year Warranty - Manufacturer's Warranty.
All expenses for parts, labor and travel time.
On-site service, typically by the next business day.
An extended Manufacturer Warranty extends the time period of the standard manufacturer warranty to replace or repair defective devices.
The contractor shall provide a minimum one (1), two (2) post warranty, and five (5) year manufacturer’s warranty.
The contractor MUST register each device with the Manufacturer to allow for DLA to, if it chooses, purchase an extended (post) warranty.
Maintenance:
Four (4) years of monthly maintenance.
8-hour response time from technician to perform remote or in person diagnosis. On site next business day equipped with correct replacement parts according to diagnosis already performed.
The offeror shall provide 8:00 am-5:00 pm, local time, maintenance and repair coverage which includes 8 hour service response for all equipment for maintenance services including travel, parts, labor, software version upgrades (up-to the hardware capability) and retrofits for all equipment including all components. A telephone call may not be an acceptable service response. A service technician must call the primary operator within 30 minutes of the service call to discuss the service problem and time of arrival. The technician must be able to perform all aspects of maintenance and actively engage in resolving the reported issue.
SP7000-25-Q-1051 Attachment 3 – SPECIFICATIONS 2
File details come from the government source that posted it. Updated .