Attachment 3 Sarco FT Series Traps.pdf
PDF 134 KB Posted
- Attached to
- Remove and Replace Greenhouse Hot Water Heaters Federal contract opportunity
- Solicitation number
- 12305B22Q0093
About this file
This document contains technical specifications for Sarco float and thermostatic steam traps models FT-15, FT-30, FT-75, FT-125, FT-150, FT-200, FTI-15, FTI-30, FTI-75, FTI-125, FTI-200, FTB, FT, FTI and FTB. The specifications include materials of construction, typical applications, installation and maintenance instructions, dimensions, spare parts, and a product index. Additionally, there is a federal contract opportunity notice seeking quotes to remove and replace two existing hot water heaters with instantaneous steam water heaters, valves, traps, piping and associated parts at two buildings for the US Department of Agriculture Agricultural Research Service by July 21, 2022. Questions regarding the solicitation must be submitted in writing by July 21 and will be posted on sam.gov.
View the file
Other files for this federal contract opportunity
Show all 27
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
St ea m T ra ps
Fl oa t & Th er m os ta tic
St ea m T ra ps
Fl oa t & Th er m os ta tic
Cast Iron Float & Thermostatic Steam Traps
FT-15, FT-30, FT-75, FT-125
The trap contains a float valve mechanism which modulates to discharge condensate continuously at steam temperature, while non-condensible gases are released by a sep-arate internal balanced pressure thermostatic air vent.
In the interests of development and improvement of the product, we reserve the right to change the specification.
Model FT-15 FT-30 FT-75 FT-125
PMO 15 psig 30 psig 75 psig 125 psig
Sizes 3/4", 1", 1-1/4", 1-1/2", 2"
Connections NPT
Construction Cast Iron Body & Cover Stainless Steel Internals
Options
Gauge Glass, Vacuum Breaker
No. Part Material 1 Body Cast Iron ASTM A126 CL B 2 Cover Screws Carbon Steel ASTM A449 3 Cover Gasket Graphite 4 Cover Cast Iron ASTM A126 CL B 5 Valve Seat Stainless Steel 6 Valve Seat Gasket Stainless Steel 7 Ball Float Stainless Steel 8 Float Arm Stainless Steel 9 Air Vent Assembly Stainless Steel Air Vent Head Stainless Steel Air Vent Seat Stainless Steel 15 Seat Bracket Stainless Steel 16 Pivot Pins Stainless Steel 17 Head Bracket, Stop, Link Stainless Steel 18 Valve Head Stainless Steel
Construction Materials
Local regulation may restrict the use of this product below the conditions quoted. Limiting conditions refer to standard connections only.
8,18
All 1-1/2", 2"
1-1/4" FT-75,
FT-125
For Capacities, See TIS 2.317
All 3/4", 1"
1-1/4" FT-15, FT-30
2 8 7 13 18 16
6 5
Limiting Operating Conditions
Typical Applications All process equipment, particularly when controlled by modulating temperature con-trol valves; unit heaters, air heating coils, heat exchangers and steam main drip sta-tions.
Max. Operating Pressure (PMO) FT-15: 15 psig (1.0 barg) FT-30: 30 psig (2.1 barg) FT-75: 75 psig (5.2 barg) FT-125: 125 psig (8.6 barg)
Max. Operating Temperature 450˚F (232˚C) at all operating pressures
Pressure Shell Design Conditions
PMA 125 psig/up to 450˚F 9 barg/up to 232˚C Max. allowable pressure
TMA 450˚F/0-125 psig 232˚C/0-9 barg Max. allowable temperature
TI-2-313-US 9.18
St ea m T ra ps
Fl oa t & Th er m os ta tic
St ea m T ra ps
Fl oa t & Th er m os ta tic
Cast Iron Float & Thermostatic Steam Traps
FT-15, FT-30, FT-75, FT-125
Maintenance This product can be maintained without disturbing the pip-ing connections. Complete isolation from both supply and return line is required before any servicing is performed.
The trap should be disassembled periodically for inspec-tion and cleaning of the valve head and seat, operating mechanism and air vent.
Worn or damaged parts should be replaced using a com-plete valve mechanism assembly and/or air vent assembly.
Complete installation and maintenance instructions are given in IM-2-300, which accompanies the product.
Spirax Sarco, Inc., 1150 Northpoint Blvd, Blythewood, SC 29016 Telephone: (803) 714-2000 FAX (803) 714-2222
TI-2-313-US 9.18
Sample Specification Steam traps shall be of the mechanical ball float type having cast iron bodies, NPT connections, and all stainless steel internals. Incorporated into the trap body shall be a stainless steel balanced pressure thermostatic air vent capable of withstanding up to 450˚F(25˚C) and resisting waterhammer without sustaining damage. Internals of the trap shall be completely servicable without disturbing the piping.
Installation A pipeline strainer should be installed ahead of any steam trap. Full port isolating valves should be placed to permit servicing. The trap should be installed below the drainage point of the equipment with a collecting leg before the trap, in a position so that the float arm is in a horizontal plane so that the float rises and falls vertically, and with the direction of flow as indicated on the body. Refer to IM-2-300 for complete instructions.
Dimensions (nominal) in inches and millimeters
Size A B C D E E1 F G Weight
3/4", 1" 6.2 4.6 3.3 3 5.75 – 1.3 0.3 9 lb 157 117 84 77 146 – 33 7.9 4.1 kg
1¼"* 1½" 8.5 4.25 3 0.7 – 8.4 3.5 – 18 lb 216 108 76 17 – 213 89 – 8.2 kg
2" 9.8 4.9 4.9 0.12 9.1 – 1.9 – 26 lb 249 124 124 3 230 – 49 – 11.8 kg
*1-1/4" 6.2 4.7 3 2.8 5.75 – 1.5 0.3 9.3 lb FT-15, FT-30 157 119 76 72 146 – 38 7.9 4.2 kg
A
AD
F
C
B
G
F
C
B
E
E E1
D
Spare Parts
Gasket Kit (3 of each) B, E Air Vent Kit H, J, L, M, N, O Valve Mechanism C, D, E, F, (G) Kit (less float) Float Kit P Replacement Module
3/4", 1", 1-1/4" FT-15
3/4", 1", 1-1/4" FT-30
3/4", 1", FT-15, FT-125
D E
F P B
C D E F G P B
Air Vent Assembly
Valve Mechanism Assembly including Pins & Links
Valve Mechanism Assembly
All 1-1/2", 2"
1-1/4" FT-75, FT-125
All 1-1/2", 2"
1-1/4" FT-75, FT-125
All 3/4", 1"
1-1/4" FT-15, FT-30
All 3/4", 1"
1-1/4" FT-15, FT-30
S p ira x S ar co
In c.
3/8" NPT Drain
3/8" NPT Drain
NO
J M H L
Consists of: Air Vent Assembly and Valve Mechanism (w/Float) attached to a Cover and supplied with a Cover Gasket, Nameplat and a set of Cover Bolts. (Assembled)
| Steam Trapping |
| Steam Traps Index |
| USTS II Universal Steam Trap Station |
| Universal Pipeline Connector |
| IPC20 and IPC21 Pipeline Connectors with Integral Spiratec Sensors |
| UFT32 Series |
| Balanced Pressure Thermostatic Steam Trap UBP32 with Universal Connector |
| UIB30 and UIB30H Sealed Inverted Bucket Steam Trap and Swivel Connector |
| USM21 Sealed Bimetallic Steam Trap for use with Pipeline Connectors |
| Thermo-Dynamic Steam Trap TDC |
| Thermo-Dynamic Steam Trap TDT Tracer Trap |
| Thermo-Dynamic Steam Trap TD42 |
| TD62LM and TD62M Thermodynamic Steam Trap with replaceable seats |
| TD120M High Pressure Thermo-Dynamic Steam Trap with Replaceable Seat |
| Cast Iron Float & Thermostatic Steam Traps FT-15, FT-30, FT-75, FT-125 |
| Cast Iron Float & Thermostatic Steam Traps FT-150, FT-200 |
| Cast Iron Float & Thermostatic Steam Traps FTI-15, FTI-30, FTI-75, FTI-125, FTI-200 |
| Cast Iron Float & Thermostatic Steam Traps FTB Super Capacity Series |
| Cast Iron Float & Thermostatic Steam Traps FT, FTI and FTB Capacities |
| Cast/Ductile Iron Float & Thermostatic Steam Trap FT14, IFT14 and FT14C |
| Float & Thermostatic Steam Trap FT14 |
| Cast Steel Float & Thermostatic Steam Traps FTB Super Capacity Series |
| Cast Steel Float & Thermostatic Steam Trap FT450 |
| Float & Thermostatic Steam Trap Capacities FT46, FT450 |
| Cast Steel Float & Thermostatic Steam Trap 3” and 4” FT450 |
| FTC80FB Cast Steel 1½" and 2" Ball Float Steam Trap |
| Stainless Steel Float & Thermostatic Steam Traps FTS150, FTS300 |
| Stainless Steel Float & Thermostatic Steam Trap FT 46 |
| FTS14 Austenitic Stainless Steel Float & Thermostatic Steam Trap |
| Balanced Pressure Thermostatic Steam Traps RTA-125, RTH-125, RTV-125 |
| Balanced Pressure Thermostatic Steam Trap T250 |
| Balanced Pressure Thermo-Matic Steam Trap TM600, TM600L, TM600N |
| BPC32 and BPC32Y Carbon Steel Balanced Pressure Thermostatic Steam Trap |
| Sealed Balanced Pressure Thermostatic Steam Trap TSS300 |
| Sealed Balanced Pressure Thermostatic Steam Trap DTS300 |
| Balanced Pressure Thermostatic Steam Trap MST21 & MST21H |
| Balanced Pressure Thermostatic Steam Trap SBP30LC |
| Cast Iron Inverted Bucket Steam Traps B Series |
| Cast Iron Inverted Bucket Steam Trap B Series Capacities Chart |
| Cast Iron Inverted Bucket Steam Trap Series 200 |
| Steel Inverted Bucket Steam Trap Series HM 34 |
| Steel Inverted Bucket Steam Trap Series HM 34 Capacities Chart |
| Stainless Steel Sealed Inverted Bucket Steam Trap SIB30 and SIB30H |
| Stainless Steel Sealed Inverted Bucket Steam Trap SIB 45 |
| Thermoton Liquid Expansion Steam Traps |
| No. 8 Liquid Expansion Steam Trap |
| SMC32 and SMC32Y Carbon Steel Bimetallic Steam Trap |
| HP80, HP100, HP150 and HP210 Series Bimetallic Steam Traps |
| HP45 Bimetallic Steam Trap |
| SPIRA-tec Steam Loss Detector System Type 30 (for use with SSL1 Sensor) |
| SPIRA-tec Remote Test Point R1 and R12 |
| R1C Steam Trap Failure Monitor |
| SPIRA-tec Automatic Steam Trap Monitor R16C |
| Trap Diffuser DF1, DF3 and Three Way Test Valve |
| MSC Manifolds for Steam Distribution and Condensate Collection |
| Vertical Condensate Collection Manifold - Fabricated |
| Vertical Steam Distribution Manifold - Fabricated |
File details come from the government source that posted it. Updated .