Attachment 2 Leslie Skidded Heater Brochure.pdf
PDF 75 KB Posted
- Attached to
- Remove and Replace Greenhouse Hot Water Heaters Federal contract opportunity
- Solicitation number
- 12305B22Q0093
About this file
This document contains a technical brochure for Constantemp skid mounted steam water heating systems and the related federal contract opportunity for their procurement and installation. The opportunity is to remove and replace two existing hot water heaters with instantaneous steam water heaters, valves, traps, piping and associated parts at an Agricultural Research Service facility. Responses are due by July 29, 2022. Questions regarding the opportunity must be submitted in writing by July 21. The selected contractor will provide all labor, materials, equipment and supervision for the installation. A mandatory site visit is also required.
View the file
Other files for this federal contract opportunity
Show all 27
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CONSTANTEMP SKID
MOUNTED HEATER
E-600L SKIDDED STEAM WATER HEATING SYSTEM
APPLICATION DATA
● See individual heaters
RATINGS
See individual heaters
FEATURES
● Save Time
● Save Manpower
● Feed-forward control
● Economical
● Completely assembled
● Only 4 connections required
– Steam
– Cold water
– Hot water
– Condensate
● 100% Leslie components
● 100% Leslie assembly
● 100% pressure tested
OPTIONS
● Recirculation Package
● Recirculation Pump
● Steam Reducing Valve
● Pressure Assisted Condensate Pump
● Pressure Gradient Monitor
SIZING INFORMATION
SEE INDIVIDUAL HEATERS
CONSTANTEMP SKID MOUNTED HEATER
SPECIFICATIONS
Constantemp heater to be mounted on a skid with all traps, strainers, pressure and temperatures gauges all fully assembled and piped. Complete package to be pressure tested for leaks.
Unit to be assembled so that is sufficient room be-tween heat exchanger and traps for proper operation.
Customer shall only need to hook up steam, cold water in, hot water out and condensate.
FRONT ELEVATION
B
A
C
END ELEVATION
COLD WATER
INLET “N”
HOT WATER
OUTLET “O”
STEAM
INLET “P”
CONDENSATE
OUTLET “R”
J
K
L
M
D
F E H
G
Dimensions are approximate and may vary slightly then shown. All dimensions are in inches. Standard tolerance for location of all pipe connections and envelope dimensions is plus or minus 1/2".
End Connection E1500L/300L E4500L/600L E7500L/900L E1050L/1200L “N” Cold Water Inlet 11⁄2 MNPT 2 MNPT 21⁄2 MNPT 21⁄2 MNPT “O” Hot Water Outlet 2 FNPT 2 FNPT 21⁄2 FNPT 21⁄2 FNPT “P” Steam Inlet 3 150# Fig. RF 3 150# Fig. RF 4 150# Fig. RF 4 150# Fig. RF “R” Condensate Outlet 1 150# Fig. RF 11⁄2 150# Fig. RF 11⁄2 150# Fig. RF 11⁄2 150# Fig. RF
Model A B C D E F G H J K L M E1500L/E300L 281⁄4 141⁄8 551⁄2 371⁄2 301⁄2 151⁄4 63⁄8 41⁄4 4515⁄16 345⁄8 221⁄2 12 22.5 12
(718) (359) (1410) (953) (775) (387) (162) (108) (1167) (879) (572) (305) (559) (305)
E4500L/E600L 281⁄4 141⁄8 581⁄4 395⁄8 301⁄2 151⁄4 81⁄2 43⁄8 467⁄8 351⁄4 221⁄4 133⁄4 221⁄4 133⁄4
(718) (359) (1480) (1006) (775) (387) (216) (111) (1188) (895) (565) (349) (565) (349)
E7500L/E900L 281⁄4 141⁄4 681⁄4 425⁄8 301⁄2 151⁄4 111⁄2 43⁄4 475⁄8 351⁄4 19 11 19 11
(718) (359) (1734) (1083) (775) (387) (292 (121) (1210) (895) (483) (279) (483) (279)
E10500L/E1200L 311⁄2 151⁄4 681⁄4 44 301⁄2 151⁄4 111⁄2 91⁄2 475⁄8 351⁄4 19 11 19 11
(800) (387) (1734) (1118) (775) (387) (292) (241) (1210) (895) (483) (279) (483) (279)
MATERIALS OF CONSTRUCTION
Heater: …………………………See Individual Heater Skid: …………………………21⁄2 x 21⁄2 x 1⁄4 Angle Iron
DIMENSIONS inches (mm)
File details come from the government source that posted it. Updated .