Attachment 13 Prior Customer Questionnaire.pdf

Acquisition Delta, Innovation and Prototyping Space Test Program (STP)

Space Test Experiment Platform 2.0 (STEP 2.0)

Attachment 13 Prior Customer Questionnaire

RFP: FA8809-24-R-B001

Version 1 Space Systems Command

Acquisition Delta, Innovation and Prototyping DoD Space Test Program

(SSC/SZIS)

Kirtland Air Force Base Albuquerque, NM 87117

STEP 2.0 IDIQ

Attachment 13 Prior Customer Questionnaire RFP: FA8809-24-R-B001

Acquisition Delta, Innovation and Prototyping Space Test Program (STP)

Space Test Experiment Platform 2.0 (STEP 2.0)

SUBMITTED BY:

Date

DAVID J. LORE, Major, USSF Program Manager, STEP 2.0

APPROVED BY:

Date

BRIAN A. SHIMEK, Lt Colonel, USSF Director, DoD Space Test Program

Intentionally Left Blank

Space Test Program multi-award Indefinite Delivery Indefinite Quantity (ID/IQ) STEP 2.0 contract award is limited to spacecraft (SC) offerors that can demonstrate responsibility as prime or subcontractor on a minimum of one spacecraft development, as an aerospace company.

Terminology:

SC refers to the SC bus with no payloads (PLs). A PL is the space-borne hardware and software components of an experiment (e.g., instruments, booms, and antennas) supplied as Government Furnished Property (GFP) from STP or reimbursable customers. The PL suite is the combination of all PLs on the mission. The SV is the SC integrated with the PL suite. Prime Contractor refers to the company in charge of overseeing the completion from start to finish. Subcontractor refers to a company who performs part or all of the obligations of another company’s contract.

Instructions:

Please do not add any additional comments as to how the work was completed in Section I, II and III. Mark only in the Section III with an X for applicable work. If the contractor was not responsible for a listed task in a prior contracting effort, please leave blank. Each offeror completes Sections 1 & II of the PCQ while the prior customer completes Section III to verify the contractor’s responses.

I. Contractor Information

Name of Company Being Verified: Address:

Point of Contact: Phone: Proposal Phone

II. Customer Information

A.

Agency/Company Name: Address:

Contracting Officer/Company Representative Name:

Phone: Email Address:

Technical Representative Lead Name: Phone: Email Address:

B.

Mission Name or Designation: Contract Phone:

C.

Date of Contract: Period of Performance (including options):

From: To:

Total Days on Orbit:

Launch Date: Post Launch Acceptance Review / Nominal Operations Readiness Review (NORR) Date:

Orbit Parameters: Inclination:

Perigee: Apogee:

LEO/MEO/GEO/Other:

Prior Customer Questionnaires

III. Contractor Verification

The contractor demonstrated the following contractor responsibilities for spacecraft development*, which included the following:

During the contract performance being verified, this firm was the:

Prime Contractor

Subcontractor

Spacecraft manufacturer Conducted SV Integration and Test (I&T) Conducted space vehicle to launch vehicle I&T support Conducted pre-launch operations support and launch support Conducted on-orbit space vehicle checkout Mission Operator

* Development implies design, fabrication, assembly, and testing.

Verifier’s Name Title

Verifier’s Signature