Attachment 1 Folder 1 AR-ETP-25-116_Lightweight Base Layer Shirt_4.0_4Feb2026.pdf

Department of Defense Clothing and Textiles

Product Code AR-ETP-25-116

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Scope

Description Scope

This specification covers the requirements for the All Range Tactical Clothing (ARTC) base layer shirt

Design

The shirt shall be constructed with a flame resistant jersey knit fabric. The shirt shall be long sleeves with flat seam construction.

Size and Length / Stature Combinations X Small / No Length

Small / No Length

Medium / No Length

Large / No Length

X Large / No Length

XX Large / No Length

Intended End Use

Page 1 of 22/4/2026

General Statements - Scope Category Description Statements

Classification End Item General Statement The end item(s) shall be of the following types, classes and styles as specified in the contract..

Schedule of sizes End Item General Statement The end items are available in the following sizes as specified in the contract

Page 2 of 22/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Components Image/Sketch Product Code Description QTY Additional Description Placement Comments

AR-CTP-24-134 Thread, Meta-Aramid, Spun Staple Tex 27, 476/498 Coyote

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-135 Care Instruction Non-woven

Materials Image/Sketch Product Code Description Placement Material Type Total Composition Comments

AR-MTP-25-215 Lightweight Jersey Knit Knit

Materials and Components

General Statements - Materials and Components Category Description Statements

Recycled, recovered, or environmentally preferable materials General Statement Recycled, recovered, environmentally preferable, or biobased materials should be used to the maximum extent possible, provided that the material meets or exceeds the operational and maintenance requirements, and promotes economically advantageous life cycle costs.

Requirements General Statement The materials and components shall conform to the requirements specified in material properties in accordance with the Quality Requirements and Inspections Methods.

Label Image/Sketch Product Code Description Material Comments

AR-CTP-24-111 Heat Transfer Size Label

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Material- Colors Image/Sketch Product Code Description Placement

AR-MTP-25-215 Lightweight Jersey Knit

Component-Colors Image/Sketch Product Code Description

AR-CTP-24-134 Thread, Meta-Aramid, Spun Staple

Label - Colors

Colors

General Statements - Colors Category Description Statements

General Statement - Colors Material The fabric(s) shall be in the following color(s) as specified in the contract.

Colorways Color Family Color Image/Swatch L A B Comments

Image/Sketch Product Code Description

AR-CTP-24-135 Care Instruction

AR-CTP-24-111 Heat Transfer Size Label

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Label and Artwork Placement

General Statements - Label and Artwork Placement GS Tab Category Description Statements

Label and Artwork Placement Artwork General Statement The artwork shall conform to the requirements listed when examined as specified.

Label and Artwork Placement Label General Statement The label(s) shall conform to the requirements listed when examined as specified.

Label Additional Details

Label Label Placement Measurement Image/Sketch Comments

|Heat Transfer Size Label Inside garment 3/4" down from back neck raw edge, center back torso (inside)

|Care Instruction From side seam 2" from bottom hem shall include in “Use & Care Instructions” in 8-point font and a QR code (½”x ½”)

Artwork Artwork Placement Measurement Image/Sketch Comments

Artwork Additional Details

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Pattern List Pattern Name Piece Part Cut Parts Material Name comments n/a BACK 1 Lightweight Jersey Knit n/a FRONT 1 Lightweight Jersey Knit n/a SLEEVE 2 Lightweight Jersey Knit n/a COLLAR 1 Lightweight Jersey Knit

Patterns

General Statements - Patterns GS Tab Category Description Detail Statements

Patterns General Statement - Patterns

Standard Standard patterns, providing a seam allowance of ⅜ inch for all seams except where otherwise specified, will be furnished by the Government. The list of pattern parts and computer nomenclature is provided to ensure that the pattern set provided is complete. The Government patterns shall not be altered in any way, and shall only be used for cutting the contractor’s working patterns. The working patterns shall be identical to the Government patterns, except that additional notching, if needed to facilitate manufacture is permitted on the contractor’s working pattern. Minor modifications are permitted where necessary to accommodate the manufacturer’s processes and the use of automated equipment provided the modifications do not alter the dimensional, serviceability, or appearance requirements cited in this document or governed by the Government pattern.

Patterns Component Parts General Statement Component parts shall be cut from the materials specified and in accordance with the pattern parts listed to achieve the desired fit.

Pattern Support Details Pattern Name Piece Part Cut Part Comments

Page 1 of 12/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Construction

General Statements - Construction GS Tab Category Description Detail Statements

Construction General Statement - Construction

End Item End item construction shall conform to the requirements and figures to maintain end item configuration as verified by the quality requirements and inspection methods specified. Following the exact sequence of operations is not required, provided the finished end item meets the finished form, fit, and function requirements as those produced by following the sequence of operations.

Construction Seams and Stitches General Statement The end item shall be made in accordance with the stitches and seams specified. The contractor is not required to follow a specific sequence of operations provided the finished end item meets the finished form, fit, and function.

Construction Workmanship End Item General Statement General Statement The finished end item shall be uniform, and the occurrence of defects shall not exceed the established Acceptance Quality Limits (AQL) and shall not adversely affect the serviceability, appearance, and uniformity of the product.

Page 1 of 32/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Construction Images

Page 2 of 32/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Additional Images and Description Image/Sketch Description

Stitches and Seams Seaming

Area/Location Seaming Area

Operation Operation Detail Stitch Type Seam Type Additional Details Stitches Per Inch(SPI) Comments

Bottom Hem Double 3/4" turn and coverstitch;

overlapping 1" and secure with 1/4" vertical backstitch

406 EFa-2 Double needle coverstitch 14-16

Sleeve Hem Double 3/4" turn and coverstitch;

overlapping 1" and secure with 1/4" vertical backstitch

406 EFa-2 Double needle coverstitch 14-16

Sides, Armhole, Sleeves, Collar, Shoulder

Flatlock 607 FSa-1 Flatlock 14-16

Bartacks / Tacks / Backtacks Placement Size(Inches) Stiches Per Inch Number Horizontal Vertical Comments

Collar 1/4 16 þ ¨

See drawing

Construction Details Secondary Construction Area / Location Description Requirement Image/Sketch

Construction Details Construction Area / Location Description Requirement Image Number

Page 3 of 32/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules

General Statements -TOFM & Grade Rules GS Tab Category Description Detail Statements

TOFM and Grade Rules Finished Dimensions General Statement The finished end item shall conform to the measurements specified in the

Table of Finished Dimensions (TOFM) as defined by the Method of Measure

(MOM).

TOFM and Grade Rules Method of Measure General Statement All measurements are taken with garments laid on a flat, clean surface with all folds smooth, being careful not to stretch or distort the garment. All measurements are taken from the front of the garment unless otherwise noted.

Page 1 of 32/4/2026

Grade Rules

Code Point of Measure How To Measure Base Tol X Small Small Mediu m Large X

Large

XX

Large

¨ 018 Neck width (back) Measure straight across from HPS to HPS.

7 1/4 - 1/4 - 1/4 0 3/8 3/8 3/8

¨ 018 Neck Opening at Seam, On Half Fold garment in half at CF and CB, matching shoulder seams, and measure neck seam on curve with collar relaxed.

9 1/2 1/4 - 1/2 - 1/2 0 1/2 1/2 1/2

¨ ACS003 Collar minimum neck stretch on half 13 1/4 - 1/2 - 1/2 0 1/2 1/2 1/2

¨ 020 Center Front neck drop Find horizontal line between from HPS to HPS and measure distance from the center of this line down to CF neck seam.

3 1/2 1/4 - 1/4 - 1/4 0 1/4 1/4 1/4

¨ 020 Center back neck drop Find horizontal line between from HPS to HPS and measure distance from the center of this line down to CB neck seam.

1 1/4 - 1/8 - 1/8 0 1/8 1/8 1/8

¨ ACS001 Sleeve Length From center back neck to top of shoulder seam to sleeve hem at top of sleeve opening. 35 1/2 - 3/4 - 3/4 0 3/4 3/4 3/4

¨ TS005 Half Sleeve Opening Measure at bottom of sleeve hem from folded edge to folded edge 4 3/4 1/4 - 1/4 - 1/4 0 1/4 1/4 1/4

¨ L3S68 Bicep, 1" Down from Armhole, On Half Measure straight across sleeve 1" below armscye at an angle parallel to sleeve hem. 8 3/4 3/8 - 1/2 - 1/2 0 1/2 1/2 1/2

¨ B0003.1 Across Shoulder, seam edge to seam edge Measure straight across from left to right at top point of shoulder seam. 18 3/8 -1 -1 0 1 1 1/4 1 1/4

¨ ACS005 Chest Width Measure 1" below armhole, straight across garment from side to side. 21 1/4 1/2 -2 -2 0 2 2 2

¨ ACS007 Sweep Measure on Half along Bottom 20 3/4 1/2 -2 -2 0 2 2 2

¨ ACS004 Center Front Length Measure from high point of shoulder straight down to hem. 29 1/2 - 3/4 - 3/4 0 3/4 3/4 3/4

¨ ASC002 Center Back Length Measure from high point of shoulder straight down to hem. 0 0 - 3/4 - 3/4 0 3/4 3/4 3/4

Department of Defense Clothing and Textiles

Product Code AR-ETP-25-116

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

TOFM & Grade Rules Size Range Alpha Sizes XXS-4XL | Fit Type Unisex

Selected Sizes X Small|Small|Medium|Large|X Large|XX Large

Base Size Medium

Additional TOFM Details

Page 2 of 32/4/2026

Code Point Of Measure How to Measure Tol Base Size Grade

Page 3 of 32/4/2026

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods Inspection Conditions General Statement General Statement Unless otherwise specified in the contract inspections shall be performed in accordance with the test conditions specified in applicable test method documents and as specified by the inspection methods.

Inspection Methods In Process Examination General Statement General Statement In process examination shall be made at any point or during any phase of the manufacturing process to determine whether construction details which cannot be examined in the finished product, are in accordance with the requirements specified. Materials and components which contain defects and damages, as defined in the list of defects, shall be removed from production. Any in-process nonconformance remaining in the finished product shall be classified as a defect in accordance with the list of defects.

Inspection Methods Dimensional Examination General Statement General Statement The finished end item shall be examined for conformance to the dimensions specified in Table of Finished Measurements (TOFM) as defined by the Method of Measures (MOM) . Any measurement deviating from dimensions and tolerances specified shall be scored as a measurement defect.

Inspection Methods Visual Examination General Statement General Statement The end item shall be examined for defects in color, shade, design, material, finish, construction, workmanship, marking, and the defects shall be classified in accordance with the list of defects.

Inspection Methods Dimensional Examination General Statement General Statement The finished end item shall be examined for conformance to the dimensions specified in Table of Finished Measurements (TOFM) as defined by the Method of Measures (MOM) . Any measurement deviating from dimensions and tolerances specified shall be scored as a measurement defect.

General Statements - Conformance Category Description Detail Statements

Conformance Inspection End Item Acceptance Criteria General Statement Acceptance quality limits (AQL) as specified in the contract and/or order, except where otherwise indicated.

Conformance Inspection End Item Sampling General Statement Sampling for inspection shall be performed in accordance with ASQ/ANSI Z1.4. The sample shall be one (1) end item and the lot size shall be expressed in units of end items.

Conformance Inspection Requirement General Statement Samples shall be subjected to Conformance inspections for compliance with design, configuration, workmanship, dimensional and testing requirements. Conformance inspection shall consist of the inspection methods, examinations and tests specified.

Quality

General Statements - First Article Category Description Detail Statements

First Article Inspection - Quality

Acceptance Criteria General Statement The presence of defects exceeding AQLs specified in the contract or failure of any testing (end item, material or component) shall be cause for rejection of the first article.

First Article Inspection - Quality

Requirement General Statement Samples shall be subjected to First Article inspection for compliance with design, configuration, workmanship, dimensional and testing requirements. First article inspection shall consist of the inspection methods, examinations and tests specified.

First Article Inspection - Quality

Sampling General Statement The sample size shall be as specified in the contract. The sample unit shall be one finished end item and the lot size shall be expressed in units of end items.

General Statements - Inspection Methods Category Description Detail Statements

Inspection Methods In Process Examination General Statement General Statement In process examination shall be made at any point or during any phase of the manufacturing process to determine whether construction details which cannot be examined in the finished product, are in accordance with the requirements specified. Materials and components which contain defects and damages, as defined in the list of defects, shall be removed from production. Any in-process nonconformance remaining in the finished product shall be classified as a defect in accordance with the list of defects.

Inspection Methods Inspection Conditions General Statement General Statement Unless otherwise specified in the contract inspections shall be performed in accordance with the test conditions specified in applicable test method documents and as specified by the inspection methods.

Inspection Methods End Item General Statement General Statement Finished end items shall be inspected in accordance with the inspection methods specified and those referenced specifications and standards unless otherwise excluded, amended, or modified in this specification or applicable procurement documents

Inspection Methods Testing End item General Statement General Statement Finished end items shall be examined and tested in accordance with the specified examinations and tests on the end item properties unless otherwise excluded, amended, or modified in this document or applicable procurement documents. End item physical tests apply to the finished end item to include all pre and post treatments, assemblies and operations.

Additional Quality General Statements Category Description Detail Statement

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Material Properties and Testing Requirements are to be found within the Material and Components identified.

End Item Properties and testing are to be found within End Item Testing

GENERAL STATEMENTS - MATERIAL AND COMPONENTS PHYSICAL REQUIREMENT

GS Tab Category Description Detail Statement

Material Properties and Testing Physical Requirements - Material Properties and Testing

End Item General Statement General Statement The end item shall conform to the requirements listed when tested as specified.

Material Properties and Testing Component Standard Samples General Statement The finished component shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Material Properties and Testing Material Standard Samples General Statement The finished material shall match the standard sample for shade and appearance and shall be equal to or better than the standard sample with respect to all characteristics for which the standard sample is referenced.

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Additional End Item Properties & Testing Requiremnts

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

End Item Testing

General Statements - End Item Testing Category Description Detail Statements

Physical Requirements - End Item Testing

General Statement The finished end item shall conform to the requirements listed when tested as specified.

End Item Testing

Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Dimensional Stability 50 washes, wales %|Percentage Maximum 10 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Table I, III, (Ai)

Dimensional Stability 50 washes, course %|Percentage Maximum 5 American Association of Textile Chemist and Colorists

(AATCC)

AATCC TM150|Dimensional Changes of Garments after Home Laundering|3363|

Table I, III, (Ai)

Toxicity The finished end item shall not present a health hazard and shall show compatibility with prolonged, direct skin contact, as specified in 40 CFR §798.2250, Dermal Toxicity, and 40 CFR §798.4100, Dermal Sensitization. Chemicals recognized by the Environmental Protection Agency as human carcinogens shall not be used.

Department of Defense - Internal

ITP6|Toxicity|3363|

Material Properties Color

Color Characteristic Characteristic Additional Detail UOM Min/Max Requirements Source Test method Test Method Options

Visual Shade Matching The color and appearance of the end item shall match the standard sample when viewed using the AATCC EP 9, Option C, with a primary light source simulating the spectral quality of average daylight, CIE Illuminant D65, with a color temperature of 6500 (± 200) Kelvin (K) illumination of 100 (± 20) foot candles. Alternatively, the color and appearance of the end item shall match the standard sample with a primary light source simulating artificial daylight, CIE Illuminant D75, with a color temperature of 7500K (± 200) illumination of 100 (± 20) foot candles in lieu of D65. The end item shall also be a good match to the standard sample with a secondary source simulating the spectral quality of incandescent lamplight, CIE Illuminant A, with a color temperature of 2856K (± 200).

American Association of Textile Chemist and Colorists

(AATCC)

AATCC EP9|Evaluation Procedure for Visual Assessment of Color Difference of Textile|3363|

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Internal Test Procedures

Internal Test Procedures- Style Source Test Method Test method options Test method description

Department of Defense - Internal

ITP6|Toxicity|3363| If dermal toxicity testing is required, it will be conducted in accordance with Title 40 of the Code of Federal Regulations, current editions and applicable sections, which are consistent with OECD tests: Skin Sensitization 406 and Dermal Irritation 404 (https://www.oecd-ilibrary.org/environment/oecd-guidelines-for-the-testing-of -chemicals-section-4-health-effects_20745788?page=1). Dermal sensitization:

https://www.law.cornell.edu/cfr/text/40/798.4100 Dermal toxicity:https://www.law.cornell.edu/cfr/text/40/798.2250

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Defects End Item Item Defect Type NOs Defect Additional Detail Measurements Major Minor

1 Undershirts Material 01 Hole, cut, tear, smash, burn, drill hole, run, needle chew, abrasion damaging the fabric, affecting appearance or serviceability þ ¨

2 Undershirts Material 02 Any weakening defect such as smash, multiple float, thin place, drop stitch or loose slub that might develop into hole " þ ¨

3 Undershirts Assembly and Workmanship 03 Distorted parts or poor workmanship ¨ þ

4 Undershirts Stitching and Seaming 04 Needle chew ¨ þ

5 Undershirts Stitching and Seaming 05 Stitches per inch not as specified ¨ þ

6 Undershirts Stitching and Seaming 06 Stitching line not starting and/or ending where specified ¨ þ

7 Undershirts Stitching and Seaming 07 Seam allowance not as specified ¨ þ

8 Undershirts Stitching and Seaming 08 Omitted ¨ þ

9 Undershirts Stitching and Seaming 09 Seam and/or stitch type not as specified ¨ þ

10 Undershirts Bartacks 10 Omitted ¨ þ

11 Undershirts Bartacks 11 Length not as specified ¨ þ

12 Undershirts Bartacks 12 Loose and or tight stitch tension ¨ þ

13 Undershirts Bartacks 13 Placement not as specified and/or misaligned ¨ þ

14 Undershirts Cleanliness 14 Any spot and/or stain on outside that cannot be completely removed with a clean cloth moistened with water ¨ þ

15 Undershirts Cleanliness 15 Objectionable odor þ ¨

16 Undershirts Cleanliness 16 Thread ends on the outside of the garment ¨ þ

Defects

General Statements- Defects Category Description Detail Statement

1 Quality End Item General Statement General Statement The finished end item shall be examined and scored for the defects listed.

Defects End Item Item Defect Type NOs Defect Additional Detail Measurements Major Minor

17 Undershirts Labels 17 Omitted þ ¨

18 Undershirts Labels 18 Font size, type and/or color not as specified þ ¨

19 Undershirts Labels 19 Label size not as specified ¨ þ

20 Undershirts Labels 20 Label not attached and/or finished as specified ¨ þ

21 Undershirts Labels 21 Label placement not as specified and/or misaligned ¨ þ

22 Undershirts Labels 22 Label text incorrect, incomplete and/or illegible (smeared or bleeding) ¨ þ

23 Undershirts Labels 26 Label not scannable ¨ þ

24 Undershirts Labels 23 Label misshaped, distorted, creased, fraying, peeling or delaminating þ ¨

25 Undershirts Packaging 24 Any garment not packaged in accordance with the contract or purchase order ¨ þ

26 Undershirts Packaging 25 Any additional items included within the purchase order not in part of solicitation ¨ þ

27 Undershirts Shade 27 Variation in shade within a part or between parts ¨ þ

Additional Defects Part NOS Defect Major Minor

1 26 Stitches skipped or broken more than 1/4 inch but not more than 1/2 inch (on edge or top stitching when seam is seamed, turned, and stitched) ¨ þ

2 27 Run offs more than 1/2 inch but not more than 1 inch on edge or top stitching if not resulting in open seam ¨ þ

3 28 Seven or more thread ends on the interior of the garment measuring more than 1/2 inch þ ¨

4 29 Barcode not visible on folded, packaged item ¨ þ

5 30 Barcode attachment causes damage to the item. ¨ þ

6 31 Thread color not as specified ¨ þ

7 32 Scissor or knife cut, tear, visible mend, pull, snag or burn þ ¨

8 33 Component part omitted þ ¨

9 34 The edge of any component part required to be forced out having folds of more than 1/8 inch ¨ þ

10 35 Shade variation within a part or between parts þ ¨

11 36 Dye streak, color not as specified ¨ þ

12 37 Open seam over 1/8 inch þ ¨

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Additional Packaging Details No Description

Packaging

General Statements- Packaging Category Description Detail Statement

General Statement - Packaging

Defense Logistics Agency (DLA) Troop Support For acquisition purposes, the packaging requirements shall be as specified in the contract or order. When packaging of materiel is to be performed by DoD or in-house contractor personnel, these personnel need to contact the responsible packaging activity to ascertain packaging requirements. Packaging requirements are maintained by the Inventory Control Point’s packaging activities within the Military Service or Defense Agency, or within the military service’s system commands. Packaging data retrieval is available from the managing Military Department’s or Defense Agency’s automated packaging files, CD-ROM products, or by contacting the responsible packaging activity.

2 General Statement - Packaging

General Preservation, packing and marking shall be as specified in the contract.

Additional Packaging General Statements Category Description Detail Statement

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Additional General Statements Category Description Detail Statement

General Statements

General Statements Category Description Detail Statement comments

1 Distribution Statement A DISTRIBUTION STATEMENT A. Approved for public release. Distribution is unlimited.

Comments, Suggestions or Questions

Combat Capabilities Development Command Soldier Center (CCDC SC)

Comments, suggestions, or questions on this document should be addressed to: Combat Capabilities Development Command Soldier Center, 10 General Greene Ave, Natick, MA 01760-5019

3 Non Government Publications

American Association of Textile Chemist and Colorists

(AATCC)

Document Source Copies of these documents are available online at https://aatcc.org

Non Government Publications

General Statement The following documents form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those specified in the solicitation or contract.

Other Government documents, drawings and publications

General Statement The following other Government documents, drawings, and publications form a part of this document to the extent specified herein. Unless otherwise specified, the issues are those specified in the solicitation or contract.

Government specifications, standards, and handbooks

General Statement The following specifications, standards, and handbooks form a part of this document to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or contract.

Other Government documents, drawings and publications

Code of Federal Regulations (CFR) Document Source Copies of these documents are available online at https://www.ecfr.gov

8 Non Government Publications

American Society for Quality (ASQ) Document Source Copies of this document are available online at https://asq.org

9 Non Government Publications

ASTM International Document Source Copies of these documents are available online at http://www.astm.org.

Order of Precedence General Statement Unless otherwise noted herein or in the contract, in the event of a conflict between the text of this document and the references cited herein, the text of this document takes precedence. Nothing in this document however, supersedes applicable laws and regulations unless a specific exemption has been obtained.

Description ARTC lightweight baselayer shirt (L2)

Legacy Reference

Style Status

Platform Combat

Environment Cold Weather

End Use

Gender Unisex

Enterprise DoD | 01

Service AR | Army

Category APP | Apparel

Sub Category Blouses Shirts Swtrs |

Size Range Alpha Sizes XXS-4XL |

Known Sources Others Product Code Vendor Comments

Additional Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

Known Sources Material Product Code Vendor Material Name Comments

Notes and Concluding Material

General Statements - Notes Category Description Detail Statement

Notes Grid Acquisition Requirement No Acquisition Type Acquisition Requirements

NSN

Base Size

Additional Notes

Item Details Intended End Use

Keyword listing

Comments

Concluding Material Project Number Preparing Activity

Review Activities Review Activities

Civilian Agencies Civilian Agencies

Custodian Custodian