Attachment 03 - HySecurity Arm.pdf

StrongArm™

(M30/M50)

Unmatched user safety.

Ultimate hardened security a Nice company

M50 with standard galvanized finish M50 with custom color

2 www.hysecurity.com | 800-321-9947

Ultimate Hardened Security Crash Tested Barriers

Powerful:

Move gates up to 20,000 lb

Tough:

Secure steel chassis and tamper resistant cover

Reliable:

UPS models remain functional during a power outage

Programmable:

Configurable for specific site requirements

Connected:

Remote monitoring, management, and maintenance.

20K

M30 with standard galvanized finish M30 NP (no power)

3www.hysecurity.com | 800-321-9947

StrongArm M30/M50 6 models Clear Opening 12 to 24 ft (3.6 to 7.3 m) Open/Close Time 6 to 8 seconds Emergency Fast Close 5 to 7 seconds

Fast:

1 - 3 ft/s operating speed.

Emergency Fast Operate at 3 ft/s

Smart:

Integrated primary/secondary controls and preprogrammed relay settings

All weather performance:

Wide temperature range without heater

Durable:

Decades long life and low maintenance

Made in USA:

Designed, tested and built with global materials

4 www.hysecurity.com | 800-321-9947

StrongArm M30 NP 60 to 120 seconds Open time 15 to 25 seconds Close time

12 to 24 ft clear opening

StrongArm M50 6 to 8 seconds Open/Close time

12 to 24 ft clear opening

StrongArm M50 NP 60 to 120 seconds Open time 15 to 25 seconds Close time

12 to 24 ft clear opening

StrongArm M30 6 to 8 seconds Open/Close time

12 to 24 ft clear opening

StrongArm® M30/M50 models Model StrongArm M30 StrongArm M50 StrongArm M30 NP StrongArm M50 NP Crash Certifi ed ASTM F2656-07 M30-P1* ASTM F2656-07 M50-P2* ASTM F2656-07 M30-P1* ASTM F2656-07 M50-P2*

Duty Cycle 100 cycles/hr**, option for continuous duty Manually operated Manually operated

Horsepower 2 hp —

Drive Hydraulic —

Open/Close Time 6 to 8 seconds depending on arm length Open time: approx. 1 to 3 minutes depending on arm length

Close time: approx. 15 to 25 seconds depending on arm length

Emergency Fast Operate Time

5 to 7 seconds depending on arm length —

Clear Opening 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments) Call for custom arm length

12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments) Call for custom arm length

Full Open Angle 90º Adjustable 88º ± 2º

Ingress Protection IP56 IP56

Temperature Rating -40º to 158º F (-40º to 70º C) or -10° to 158° F (-23° to 70° C) using biodegradable fl uid

40º to 158º F (-40º to 70º C) or -10° to 158° F (-23° to 70° C) using biodegradable fl uid

1 Phase Power 208/230V, 60/50 Hz 20A —

3 Phase Power 208/230V, 60/50 Hz, 380/460V, 60/50 Hz —

Communication RS-232, RS-485 —

User Controls Smart Touch Controller with 70+ confi gurable settings, programmed via the keypad and display or a PC using S.T.A.R.T. software.

Relays Three confi gurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs

Finish Hot dipped galvanized standard. Optional signal yellow or custom color. Hot dipped galvanized standard. Optional signal yellow or custom color.

Foundation

Shallow mount: 6 x 6 x 2 ft (183 x 183 x 61 cm), 4,000 psi concrete or (CO + 8

ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm), 5,000 psi concrete. Deep mount: 4 x 4 x 4 ft (122 x 122 x 122 cm) 4,000 psi concrete. #5 rebar, grade 60.

6 x 6 x 4 ft (183 x 183 x 122 cm) 4,000 psi concrete, #6 rebar, grade 60

Shallow mount: 6 x 6 x 2 ft (183 x 183 x 61 cm), 4,000 psi concrete or (CO + 8 ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm), 5,000 psi concrete.

Deep mount: 4 x 4 x 4 ft (122 x 122 x 122 cm) 4,000 psi concrete. #5 rebar, grade 60.

6 x 6 x 4 ft (183 x 183 x 122 cm) 4,000 psi concrete, #6 rebar, grade 60

Electrical Certifi cation

Control panel certifi ed to UL 508A by ETL —

Warranty 5 year w/product registration 5 year w/product registration

UPS Battery Backup Power***

AC Power Supply with HyInverter AC***

StrongArm M30 AC Power Supply with HyInverter AC

StrongArm M50 AC Power Supply with HyInverter

AC

Additional Model

CE Certifi cation StrongArm M30 CE StrongArm M50 CE —

* P1 and P2 rated for 12 ft clear opening. StrongArm M50 received a P2 rating with penetration limited to 1.17 m. Contact HySecurity to receive a copy of the ASTM F2656-07 M30 or M50 Test Certifi cation.

** ExtremeCycle option available

*** 208/230VAC, single-phase AC operators only. See AC Power Supply with HyInverter AC for more information.

The operator’s normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage

Only HySecurity authorized distributors and installers, trained or authorized by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity’s crash-rated barrier products.

Patented dual arm design U.S. Pat. No. 9,822,501 B2

Specifications Crucial User Safety and Security

Additional Safety Features Additional Security Features Buzzer Standard equipment in all HySecurity products, the WARN BEFORE BUZZER �provides a loud 100dB audible beep in short continuous bursts 3 seconds prior to �the barrier moving open or close and all the while the barrier arm is in motion.

Hy5B Using Hy5B vehicle detectors eliminates the possibility of loop crosstalk since �each loop is assigned its own frequency range. False close signals due to crosstalk� are never an issue.�

• No External Limit Switches or resetting the limits after power loss. The hydraulic cylinder incorporates magnetic sensors, alleviating the need for vulnerable external limit switches or recalibration.

• Remote Operator Panel operates the crash barrier from a secure location keeping area personnel out of harm’s way.

• Mag Lock option available.

• UPS Backup Optional 230V AC Power Supply with HyInverter™ AC provides UPS battery backup for 208/230VAC, single-phase AC gate operators. Retain full functionality during an AC power outage.

5www.hysecurity.com | 800-321-9947

Key Locked Pivot Post covers protect against vandalism or� unauthorized system modifications that� could render the� crash barrier unsafe� or inoperable.

Traffic Signal warns �traffic with stop and go signals and advances �vehicles once the �arm is in the full �upright position. Signal is adjustable to face either direction, or mountable on either post.

Optional second traffic signal for 2-way traffic.

Pivot Post guard covers area with moving parts to help protect personnel �from injury or entrapment.

Bright LED arm lighting boosts visibility and inhibits �accidental impact.

*Monitored Photo Eye helps protect �a vehicle and avoid� personal injury or �death by stopping �the M30/M50 Arm.

Optional second photo eye available.

Entrapment shield drastically reduces the possibility �of personal injury or death by limiting entrapment zone.

PASSENGER VEHICLE Arm bumper height protects unauthorized passenger vehicles from passing underneath the upper arm which could potentially cause severe injury, or allow an explosive laden passenger vehicle to pass under the top arm.

Hydraulic Cylinder covers reduces the potential for entrapment and� personal injury.

Public side

Secure side

User Safety is not optional Many user safety devices are standard equipment on the StrongArm M30 and M50, reducing possibility of injury and end user liability.

Catch Jaws Secure the barrier arm in the event �of a vehicular penetration attempt.

Locks Arm securely locks hydraulically

StrongArm M50, shown in optional Safety Yellow, pictured

Monitored* Photo Eye Wired or wireless

Transmitter in Pivot Post

Receiver in Catch Post

*Operator is disabled if Photo Eye is inoperative.

Up to 24 ft (7.32 m) arms.

6 www.hysecurity.com | 800-321-9947

Proven Highest Reliability Drive

• HySecurity operators thrive for decades with minimal maintenance. We’ve manufactured hydraulic industrial and crash gate operators since 1980, many of which secure high security ACPs.

• Variable flow hydraulic system generates optimized barrier arm motion, enabling high speed, ultra smooth operation which prevents bounce or excessive wear on components.

• Double acting hydraulic system opens barrier arm to full 90° vertical and allows hydraulic locking in closed position which eliminates the need for external locking devices.

• Simple, compact hydraulic system contains only one gallon of high performance hydraulic fluid. Biodegradable fluid available upon request.

• Extreme temperature range: -40º to 158º F (-40º to 70º C) or -10° to 158° F (-23° to 70° C) using biodegradable fluid.

Proven Integrated, Intelligent Controls

• As the most reliable microprocessor-based control board in the industry, the Smart Touch Controller supplies extensive features, plus RS-485 command and control interfacing for networking systems.

• Smart Touch Control gives you seamless synchronization with all HySecurity operators for dual gate, sally port or sequenced gate applications.

• Over 10 years of proven field reliability communicating alerts, status, faults, and security breach conditions.

• Smart Touch Controller and keypad are conveniently and securely mounted inside the operator.

• Integrated encoder provides precise arm positioning and enables precise motion control eliminating the vulnerability of exposed mechanical limit switches.

• Connect to a laptop using HySecurity’s Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.) computer interface to upload the latest operator software, download fault logs, generate diagnostics, and program the operator.

• Communications protocol smooths out power spikes and reduces field calls.

Ultra Reliable Simple, low cost installation

STC Board

STC Keypad

Programming Functions

OLED Display

Operating functions used with all HySecurity hydraulic operators

Hy5B Vehicle Detectors (up to 4) plug into sockets

Free Exit

Inside Loop

Outside Loop

Center Loop

StrongArm M50 operator, barrier arm, and foundation dimensions

StrongArm M30 operator, barrier arm, and foundation dimensions

2 ft (.61 m)

4.43 ft (1.35 m)

6 ft (1.85 m)

7.22 ft (2.2 m)

C/L

1.5 ft (.46 m)

C/L

2.82 ft (.86 m)

Clear Opening 12 ft to 24 ft (3.66 m to 7.32 m)

Drawing Not to Scale 6 ft x 6 ft (1.83 m x 1.83 m)

4,000 PSI concrete (minimum) for 2 ft depth 5,000 PSI concrete (minimum) for 1 ft depth. (CO + 8 ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm)

4,000 PSI concrete (minimum)

4 ft (1.22 m)

4.43 ft (1.35 m)

6 ft (1.85 m)

C/L

1.5 ft (.46 m)

C/L

2.82 ft (.86 m)

Drawing Not to Scale

7.22 ft (2.2 m)

6 ft x 6 ft (1.83 m x 1.83 m)

Clear Opening 12 ft to 24 ft (3.66 m to 7.32 m)

StrongArm M30 NP (Manual Operation) operator, barrier arm, and foundation dimensions

2 ft (61 cm)

4.43 ft (135 cm)

4 ft (122 cm)

C/L

1.5 ft (46 cm)

C/L

2.82 ft (86 cm)

Clear Opening 12 ft to 24 ft (366 cm to 732 cm)

Drawing Not to Scale 6 ft x 6 ft (183 cm x 183 cm)

4,000 PSI concrete (minimum) for 2 ft depth 5,000 PSI concrete (minimum) for 1 ft depth. (CO + 8 ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm)

7www.hysecurity.com | 800-321-9947

Standard benefits

• Ultra reliable hydraulics and controls

• Extremely low maintenance

• Dual arm design

• Highly visible LED lighting across entire length of upper arm

• Traffic signal

• Supervised photo eye

• Emergency Fast Close

• Hand pump for manual operation

• Integrated encoder provides precise arm positioning

• NEMA 3R all weather enclosure with superior hot dipped galvanized anti-corrosion finish

• Arm securely locks hydraulically

• Wide temperature range fluid standard. No heater necessary

Optional Benefits

• Hy5B™ vehicle detectors (plug-in)

• Biodegradable, non-toxic fluid

• Heater, recommended for biodegradable, non-toxic fluid in cold climates

• Main and remote operator panels

• Mag lock for additional security

• Custom color paint

• Up to four traffic signals for bi-directional traffic

• Uninterruptible Power Supply (UPS) for many cycles after

AC power loss* *Single-phase AC gate operator

System Design Support:

Contact Nice/HySecurity for help with custom site requirements, CAD drawings, tech manuals or other specifications support.

Simple, Low Cost Installation

• Plate mount design allows foundation construction independent of equipment installation.

• Self contained controls and hydraulics reduce the need for expensive and time consuming trenching of hydraulic hose and wiring to a remote control panel.

• Ultra rugged hot dipped galvanized steel for optimal corrosion protection. Available option: Hot dipped galvanized standard. Optional signal yellow or custom color.

• Shallow M30 mount 12 or 24 inch foundation depth reduces installation time and worries about utilities, water table, and other site concerns.

StrongArm M30 K4

Airport

Dam

Casino

Courthouse

Data Center

Contact HySecurity for an operator/parts distributor near you.

phone 253-867-3700 | 800-321-9947 hysecurity.com | sales@hysecurity.com

PN: 948109606 D0516 121222

a Nice company

Rating:

The power to stop a truck in its tracks, with approximately 1 meter of penetration*.

No-Power:

StrongArm M30 NP/M50 NP (No-power) models defend high security, low traffic, sites that do not have power.

Models:

International certification models (CE) available.

Speed:

Open access points in as quick as six seconds, reducing traffic backups by minimizing gate open times.

Design:

Patented dual arm design prevents vehicles of all sizes from breaching the secure perimeter.

Features:

StrongArm® M30 StrongArm® M50 Maximum security and stopping power Crash-rated vehicle barrier with patented dual arm design stops a 15,000 lb truck in its tracks.

M30

90°

Safety:

Monitored photo eye stops arm when obstructed for enhanced safety.

Tough:

Aircraft-grade hydraulics and steel components provide the highest durability.

Arm:

Full 90° opening prevents tall vehicles from clipping arm.

Made in USA:

Designed, tested and built within USA from globally sourced materials.

StrongArm® M30/M50 High Security Anti-Ram

Technical Specifications SmartTouch powered by

StrongArm® M30/M50 models Model StrongArmCrash

M30 StrongArmCrash M30

CE

StrongArmCrash

M50 StrongArmCrash

M50 CE StrongArmCrash M30 NP StrongArmCrash

M50 NP

Crash Certifi ed ASTM F2656-07 M30-P1*

ASTM F2656-07

M30-P1*

ASTM F2656-07 M50-P2* ASTM F2656-07 M30-P1*

ASTM F2656-07

M50-P2*

Full Open Angle 90º Adjustable 88º ± 2º

Duty Cycle 100 cycles/hr** Manually operated with rotary crank

Horsepower 2 hp n/a

Drive Hydraulic

Open/Close Time 6 to 8 seconds depending on arm length Open time: approx. 1 to 3 minutes depending on arm length; Close time: approx. 15 to 25 seconds depending on arm length

Emergency Fast Operate

5 to 7 seconds depending on arm length

Clear Opening 12 to 24 ft in 2 ft increments (366 to 732 cm in 61 cm increments). Call for custom arm length.

UPS Battery Backup Cycles

Optional 230VAC Power Supply w/HyInverter™ AC for single-phase AC operators n/a

Temperature Rating -40° to 158° F (-40° to 70° C) or -10° to 158° F (-23° to 70° C) Using biodegradeable fl uid.

Single Phase Voltages

208/230V 50/60Hz n/a

Three Phase Voltages

208/230V 50/60Hz or 380/460V 50/60Hz n/a

Included Accessories

Operator ships with one traffi c light and wired through beam photo eye

Communication RS-232, RS-485 n/a

User Controls Smart Touch Controller with 70+ confi gurable settings. Smart Touch keypad and 32 character, OLED display or a PC using S.T.A.R.T. software.

n/a

Relays Two confi gurable user relays: 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs n/a

Finish Hot dipped galvanized standard. Optional textured powder coat over zinc-based undercoat.

Foundation

Shallow mount: 6 x 6 x 2 ft (183 x 183 x 61 cm), 4,000 psi concrete or (CO + 8 ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm), 5,000 psi concrete. Deep mount: 4 x 4 x 4 ft (122 x 122 x 122 cm) 4,000 psi concrete. #6 rebar, grade 60

6 x 6 x 4 ft (183 x 183 x 122 cm) 4,000 psi concrete, #6 rebar, grade 60

Shallow mount: 6 x 6 x 2 ft (183 x 183 x 61 cm), 4,000 psi concrete or (CO + 8 ft) x 6 x 1 ft ((CO +244 cm) x 183 x 30.5 cm), 5,000 psi concrete. Deep mount: 4 x 4 x 4 ft (122 x 122 x 122 cm) 4,000 psi concrete. #5 rebar, grade 60

6 x 6 x 4 ft (183 x 183 x 122 cm) 4,000 psi concrete, #6 rebar, grade 60

ETL Listed Certifi ed to UL 508A by ETL n/a

Warranty 5 year w/product registration

* P1 and P2 rated for 12 ft clear opening. StrongArm M30 features an ASTM F2656-07 M30 P1 rating (1m penetration). StrongArm M50 features an ASTM F2656-07 M50 P2 rating (1.2m penetration). Contact HySecurity to receive a copy of the ASTM F2656-07 M30 or M50 Test Certifi cation.

** The operator’s normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage. ExtremeCycle option available.

*** 208/230VAC, single-phase AC operators only. See AC Power Supply with HyInverter AC for more information.

Only HySecurity authorized distributors and installers, trained or authorized by HySecurity in proper installation techniques, operation and maintenance, are eligible to purchase HySecurity crash-rated barrier products. Patented dual arm design U.S. Pat. No. 9,822,501 B2

Note: Deep mount foundation is used for M30 crash test.

945159823 Rev-C 05/2023 D0800 support.hysecurity.com

Niceforyou.com ©2023 Nice North America LLC. HySecurity is a registered trademark of Nice North America LLC. All rights reserved.

All trademarks, logos and brand names are the property of their respective owners.

Nice/HySecurity is an industry leader of automated gate and perimeter security solutions.

The HySecurity brand provides high-quality, ultra-reliable industrial gate operators and crash-rated, Hostile Vehicle Mitigation (HVM) vehicle barriers designed to secure and protect critical infrastructure and facilities worldwide.