PERFORMANCE WORK STATEMENT/STATEMENT OF WORK

NCTAMS LANT

BLDG. MB-100 DISINTEGRATOR MAINTENANCE CONTRACT

1.0 INTRODUCTION:

1.1 Naval Computer and Telecommunications Area Master Station Atlantic (NCTAMS

LANT) delivers and defends responsive, resilient, and secure computer and telecommunications systems, providing information superiority for global, maritime and joint forces. NCTAMS LANT provides classified and unclassified voice, messaging, data and video to ships, submarines, aircraft and ground forces operating worldwide in support of Naval and Joint missions. NCTAMS LANT’s vision is to be a world-class communications infrastructurpe that ensures information superiority by providing assured command and control to operational forces globally throughout all dimensions of warfare. BACKGROUND: Disintegrators are required to properly dispose of classified material in support 24 Hour operations.

2.0 BACKGROUND:

2.1 Destruction of classified or sensitive material is necessary to meet command mission and maintain current, heightened OPSEC requirements. Proper destruction of these materials is vital to ensuring that information is not compromised which could lead to an occurrence of unauthorized disclosure of information.

3.0 SCOPE OF WORK:

3.1 Repair and maintenance contract for one Whittaker Brothers Model Datastroyer 310

Disintegrator Serial # 5123, one SEM Model 200 Disintegrator Serial # 201-1207, and two Data Security Inc. Model SSMD-2M Solid State Hard Drive Disintegrator

Serial # 72-1789 and Serial # 72-1790.

3.2 Contractor will provide required number of qualified and or certified maintenance technicians necessary to provide standard and preventative maintenance.

3.2.1 Maintenance of equipment to include blade replacement, lubrication

(specifically bin tipper chains and sprockets), cleaning, removing dull knives, installing sharpened knives, sharpening dull knives, replacing belts, and repairs as required.

3.2.2 Lubrication: Lubricate PTO parts, including chains and sprockets, using appropriate food-grade lubricants.

3.2.3 Cutting Chamber Care: Clear all debris from the cutting chamber.

3.2.4 Blade/Knife Inspection: Check/Correct the tension of the shredder knife stack to ensure efficient cutting.

3.2.5 Blade Maintenance: Inspect knives for wear or damage, particularly if it's a high-security (1/4” – 3/32”) configuration, to ensure a 1,800 lbs/hour throughput isn't compromised.

3.2.6 Cleaning: Clear dust and debris from the machine control box, motor, and screen area to ensure optimal destruction.

3.2.7 Electrical Inspection: Inspect electrical connections and belt alignment.

3.2.8 Filters: Clean or replace cooling filters for the motor.

3.2.9 Inspection: Check for abnormal noises, loose or worn parts, and oil leaks.

3.2.10 Sensor Cleaning: Clean to prevent auto-start/stop malfunctions.

3.2.11 Evacuation System: Clean the discharge screen and check the bags on the evacuation system (like the FC1) for proper airflow.

3.2.12 conduct any recommended maintenance, replacements, or actions outlined in Whittaker Brothers Model Datastroyer 310 Disintegrator Operating

Instructions and Maintenance Manual, SEM Model 200 Disintegrator

Operation and Maintenance Manual, and Data Security Inc. Model

SSMD-2M Solid State Hard Drive Disintegrator Maintenance Manual.

3.2.13 Contractor will provide all services and materials.

3.3 Safety and Troubleshooting:

3.3.1 Clear Jams: Turn off and unplug the machine before clearing jams.

3.3.2 Safety Interlocks: Inspect safety features and emergency stop systems.

3.3.3 Use Proper Oil: Only use recommended shredder oil for the blades

3.4 Location of Performance: 1518 Piersey St. Norfolk, VA 23511, Bldg. MB-100 Rm.

109 COMSEC and Rm. 126 disintegrator room.

3.5 Proposed Period of Performance, once annually or repair as required. Maintenance schedule to be determined based on offer and award determination.

Base Period 30 September 2026 to 29 September 2027

Option Period One 30 September 2027 to 29 September 2028

Option Period Two 30 September 2028 to 29 September 2029

Option Period Three 30 September 2029 to 29 September 2030

Option Period Four 30 September 2030 to 29 September 2031

52.217-8 30 September 2031 to 29 March 2032

4.0 LOCATION WORK HOURS:

4.1 The majority of the work is to be performed during normal Government workdays defined as 0700 – 1500 hours local time in the identified location, excluding weekends and Government holidays (New Year’s Day, Martin Luther King’s

Birthday, President’s Day, Memorial Day, Juneteenth, Fourth of July, Labor Day, Indigenous Day, Veterans’ Day, Thanksgiving Day, and Christmas Day).

4.2 Government Furnished Material – none.

4.3 Contractor Furnished Material – The contract maintenance person/s shall provide labor, tools, materials, supplies, equipment, diagnostics, and major and minor components as necessary to maintain or repair the following:

4.3.1 Whittaker Brothers Model Datastroyer 310 Disintegrator Serial # 5123

4.3.2 SEM Model 200 Disintegrator Serial # 201-1207

4.3.3 Data Security Inc. Model SSMD-2M Solid State Hard Drive Disintegrator

Serial # 72-1789

4.3.4 Data Security Inc. Model SSMD-2M Solid State Hard Drive Disintegrator

Serial # 72-1790

4.4 The contract technicians shall furnish everything required to perform the services specified by this PWS to include periodic maintenance, diagnostics, repair, and operational testing.

5.0 APPLICABLE DOCUMENTS

5.1 All work to be performed in conjunction with this PWS shall be in accordance with the appropriate applicable documents. The work shall also comply with all

Federal and U.S. Navy policies and regulations applying to telecommunication and electrical installations including the National Electric Code. The following is a partial list of documents, which are applicable to this PWS; however, it may not be inclusive of all DOD or Industrial directives, which may be applicable to some specific tasks. In that case, the latest and highest authority level documentation will take precedence.

5.2 COMSPAWAR M-4720.1, Shore Installation Process Handbook (V4.0), 12

November 2014

5.3 MIL-STD-188-124B N3, Grounding, Bonding, and Shielding for Electronic

Common Long Haul/Tactical Communications Systems including Ground based

Communications - Electronics Facilities and Equipment

5.4 NFPA 70, National Electrical Code; current addition MIL-HDBK-419A, Vol. 2, Grounding, Bonding, and Shielding for Electronic Equipment and Facilities

5.5 NSTISSAM TEMPEST/2-a95, 12 December 1995 with Amendment NSTISSAM

5.6 TIA/EIA 607, Grounding and Bonding Requirements for Telecommunications in

Commercial Buildings

5.7 TIA/EIA 568-B.1, Commercial Building Telecommunications Wiring Standard

5.8 OPNAVINST 5100.23G, CH-1, Navy Safety and Occupational Health Program

5.9 DOA Technical Criteria for the Installation of Information Infrastructure

Architecture (I3A)

5.10 Whittaker Brothers Model Datastroyer 310 Disintegrator Operating

Instructions and Maintenance Manual

5.11 SEM Model 200 Disintegrator Operation and Maintenance Manual

5.12 Data Security Inc. Model SSMD-2M Solid State Hard Drive Disintegrator

Maintenance Manual.

6.0 QUALITY CONTROL SURVEILLANCE PLAN (QASP)

6.1 The Contractor shall maintain an inspection system and quality control program, covering the services under this PWS. The design of the inspection system is left to the Contractor's discretion and relates to the Government's quality assurance program and provides the desired quality control.

6.2 The Government will inspect and monitor the Contractor's performance.

Techniques may include announced and unannounced Operational Readiness

Inspections, Function Checks, and customer complaints.

6.3 Corrective Actions; Contractor shall complete all maintenance or repairs to the satisfaction of the government, meeting all safety and operational requirements.

6.4 Conditions Found:

6.4.1 Contractor shall identify and provide a written report of any pre-existing conditions within thirty (30) calendar days of start performance period. Government personnel will validate the contractor’s findings and record any discrepancies. Discrepancies not resolved between the contractor and site POC/COR shall be negotiated between the government Contracting Officer (KO) and contractor concerning pre-existing condition findings. How and whether to remedy pre-existing conditions is at the Navy’s discretion. The absence of an official written report by the contractor within the specified timeframe shall indicate there are no “pre-existing conditions”.

6.4.2 If COR or Contracting Officer determines the Condition Found does not warrant additional services, contractor shall continue with original scope of work.

6.5 Safety section. Contractor shall perform all work in accordance with

OPNAVINST 5100.23G, CH-1, Navy Safety and Occupational Health

Program and or applicable state or federal safety standards.

6.6 Contract deliverable. Contractor is responsible for maintaining and or repairing specified equipment is in tested following any action and is tested to ensure operability.

6.7 Sanitation and space cleanliness directions. Contractor is responsible for cleanliness of equipment and surrounding area following completion of maintenance or repair.

7.0 CANCELLATION/OTHER CONDITIONS

7.1 This contract may be cancelled in whole or in part with a 30-day written notice from the Contracting Officer. If this tasking is cancelled, the U.S.

Government shall be liable only for payment of services received before the effective date of the termination.

7.2 The contractor must be aware of contingencies. Due to the emergent nature of exercise and real-world communications requirements and schedules, adjustments in the amount of labor, overtime and other resources needed to complete the task may be required.

7.3 This contract may be terminated in whole or in part with a 30-day written notice from the Contracting Officer. In the event of such cancellation or if the

Government should decide not to exercise an option period, under no circumstances shall the Government be liable for proposal costs, administrative costs, severance, overhead, profit, or any other cost subsequent to the effective date of the whole/partial cancellation of non-exercise of option period. The Government will be liable only for payment for services received before the effective date of the whole/partial cancellation or non-exercise of option period.

8.0 BASE ACCESS/SECURITY

U.S. citizenship is required of all Contractor personnel. Contractor functions involve delivery of service to support the Department of the Navy mission requiring confidence or trust; position designation is at the Non-Critical Sensitive level. Position requires access to open storage secret areas. This contract does not require a DD Form 254

"Contract Security Classification Specification." The Security Manager, NCTAMS

LANT Code N00SM, via the COR, is the point-of-contact regarding issues for site access and for any security matters.

8.1 Contractor must be eligible to obtain Installation access through Naval Station

Norfolk Pass and ID office, access requires filling out an SF-5512 at least three weeks in advance and routing to Installation Pass and ID to ensure that access is granted.

9.0 CONTRACTOR PERSONNEL

9.1 STANDARDS OF BEHAVIOR; Contractor personnel shall present a neat, clean and professional appearance as generally observed in a professional setting and shall adhere to the US Navy’s no smoking policy. Smoking is allowed only in designated areas where it does not compromise the rights of non-smokers.

9.2 PERSONNEL REMOVAL; Government rules, regulations, laws, directives, and requirements which are issued during the contract term relating to law and order, installation administration, and security on the installation shall be applicable to all contractor employees or representatives who enter the installation. Violation of such rules, regulations, laws, directives, or requirements may result in the command removing personnel from the base.

Removal of employees does not relieve the contractor from the responsibility for the work defined in this contract.

9.3 REMOVAL BY INSTALLATION COMMANDER; The Installation

Commander may bar an individual from the installation for conduct determined to be contrary to good order, discipline, or installation security.

9.4 REMOVAL BY CONTRACTING OFFICER; The Contracting Officer

may require the contractor to remove any employee, working under this contract, for reason of misconduct or security. Contractor employees shall be subject to removal from the premises upon determination by the Contracting

Officer that such action is necessary in the interests of the government.

9.5 GENERAL/MISCELLANEOUS INFORMATION (Informational

Purposes Only);

9.5.1 Identification of Employees: The Contractor shall be responsible for furnishing identification cards to its employees as may be approved and directed by the Contracting Officer’s Representative.

The Contractor shall require its employees to display this identification at all times. Upon release of any employee, the

Contractor shall immediately take procession of the prescribed identification card.

9.5.2 Transportation: The contractor shall provide contractor-owned vehicle/transportation for use during working hours. Only contractor’s employees who possess a valid U.S. motor vehicle operator’s identification card shall operate the vehicle. All contractor motor vehicle operators must comply with traffic safety program set forth in OPNAV Instruction 5100.12.

9.5.3 The Secretary of the Navy has determined that the illegal possession and use of drugs and paraphernalia by civilian and contract employees in the military setting contributes directly to military drug abuse and undermines command efforts to eliminate drug abuse among military personnel. The policy of the

Department of the Navy, including the Marine Corps, is to deter and detect drug offenses by civilian and contract employees on military installations. Measures to be taken to identify drug offenses on military installations, and to prevent introduction of illegal drugs and paraphernalia include routine, random inspections of vehicles and personal possessions on entry or exit, with drug detection dog teams, when available. Where there is probable cause to believe that a civilian or contract employee on board a

Naval or Marine Corps installation has been engaged in use, possession, or trafficking of drugs, that employee may be restricted or detained for the period necessary until that employee can be removed from the installation or can be turned over to local law enforcement authorities having jurisdiction, as appropriate. When illegal drugs are discovered during an inspection or search of a vehicle operated by a civilian or contract employee, the employee and vehicle may be detained for a reasonable period of time necessary to turn the employee and the vehicle over to appropriate civil law enforcement officials; action may be taken to suspend, revoke, or deny installation driving privileges. Implicit with the acceptance of this contract is the Contractor’s agreement to comply with Federal statues, laws, and regulations, including those regulations issued by the commander of the military installation.

10.0 POINTS OF CONTACT

10.1 Mike Hausmann, Security Officer

NCTAMS LANT (N00SM1)

1518 Piersey Street

Norfolk, VA 23511-2784

Commercial Telephone # 757-400-9119

E-mail address: christopher.m.hausmann.civ@us.navy.mil

11.0 SECURITY INFORMATION

11.1 Follow requirements of SWFLANTINST 5530.7R, 15 Sept 2022, (Must use latest revision), APPENDIX B- INVESTIGATIVE REQUIREMENTS FOR

ACCESS TO CA AND WRA.

11.2 Submit Form SECNAV 5512/1 (MAY 2021) (Must use latest revision), DEPARTMENT OF THE NAVY LOCAL POPULATION ID CARD/BASE

ACCESS PASS REGISTRATION

11.3 Badge Requirements. Identification Badges are required for access to each naval activity. The badges can be obtained at the Franklin Pass and I.D. Office located at the naval activity. Identification badges shall be worn at all times while on the activity and shall be in plain view in a conspicuous place above the waist.

Wearers of identification badges shall maintain a picture I.D. on their person. All contracting personnel will be required to have a pre-job brief on security awareness. Materials delivered by other than the Contractor's personnel who have identification badges, will require a bill-of-lading, or visit request, an escort for the vehicle and its driver into and out of the facility, and a SWFLANT 5530/57

(Rev. 03/21), RESTRICTED AREA VEHICLE ACCESS REQUEST, for the vehicles. See Section H paragraph 1 for additional building specific information.

a. Contractors needing access into the WRA will need swipe access granted by SWFLANT. Submit a Perimeter Intrusion Detection and Assessment

System (PIDAS) form 24 hours prior to visit to SWFLANT. Once contractor receives their badge from Pass and I.D., contractor will go to the ESB, building

6005, and receive a pin for swipe access to the turnstiles at the Entry Control

Points (ECPs).

11.4 Requirements for Access to Navy Installations:

a. Commander, Navy Installations Command (CNIC), has established the Defense

Biometric Identification System, (DBIDS), a standardized process for granting unescorted access privileges to vendors, contractors, suppliers and service providers not otherwise entitled to the issuance of a Common Access Card (CAC) who seek access to and can provide justification to enter Navy installations and facilities.

Participation in the DBIDS is not mandatory, and if the Contractor chooses not to participate, the Contractor's personnel will have to obtain daily passes, be subject to daily mandatory vehicle inspection, and will have limited access to the installation.

The Government will not be responsible for any cost or lost time associated with obtaining daily passes or added vehicle inspections incurred by nonparticipants in the

DBIDS. Alternatively, if the vendor so chooses, may voluntarily elect to obtain long-term credentials through enrollment, registration, background vetting, screening, issuance of credentials, and electronic validation of credentials. Further information regarding DBIDS can be found at www.cnic.navy.mil/operations-and-management/basesupport/DBIDS, The Contractor shall estimate a minimum of 25 business days for DBIDS processing.

b. Individuals must be United States Citizens: Contractor must certify employee and subcontractors are U.S. Citizens by viewing U.S. government issued document

Employment Eligibility Verification Form I-9. Personnel with valid government issued clearance are exempt from this requirement; verification can be accomplished using Defense Information System of Security (DISS).

c. Due to increased security requirements, foreign national access to the base will not be allowed except under extreme circumstances. Approval of access by foreign nationals requires a significant amount of time. The following information must be provided to the delivery site representative a minimum of 25 business days before a visit:

• Name

• Country of Origin

• Firm/Contract Number

• Area to be visited

• Reason for visit

• Exact dates when visit will occur.

(1) When/if approval is received; the individual(s) must be escorted at all times by a Kings Bay, GA designated individual.

d. Secret and Interim Clearances. Access to submarine including DD when submarine is present, must possess valid personnel security clearance, minimum

SECRET. INTERIM clearances are not authorized access to the engine room or restricted data and Navy Nuclear Propulsion Information (NNPI). Those with interim clearance will be issued a purple-colored badge. Send visit requests via the Defense

Information System for Security (DISS) to Security Manager at TRFKB SMO Code

444665 (TRF Sponsor/Phone#) and request areas of access.

The contractor will ensure that all entries into the Defense Information System for

Security (DISS) include the designation “Urgent, Emergent, or Critical Work.”

Failure to properly identify this requirement may result in delays to access and performance and will be considered noncompliant with this Statement of Work.

Applicable badge codes are as follows:

(a) Area 3: Access to Submarines

(b) Area 7: Waterfront Operations Area

(c) Area 8: Industrial/Support Operations Area

(d) Area 9: Site 6

(e) Area 12: Controlled Operational Area (COA) Checkpoint Charlie Gate

e. Personnel without a valid security clearance access level who require access to the Waterfront Restricted Area (WRA) (TRIDENT Refit Wharf

Enclave) or Site Six piers, less submarine or Dry Dock Basin access when submarine is present, must complete a trustworthiness determination background check and meet WRA access requirements contained in SWFLANTINST

5530.7R. Trustworthiness determination requires the individual to complete a government-initiated security questionnaire (SF 85P), OF-306 and provide fingerprints. Additionally, each individual must consent to a National Crime

Information Center (NCIC) background check. The government reserves the right to deny access based upon unfavorable trustworthiness determination, unfavorable NCIC results, or failure to provide requested security questionnaire information. Such determinations will be final. There are no appeal rights to a determination to deny access. It is the COs prerogative to deny access to any area under their jurisdiction.

f. Contractor is to provide a worksite access list containing company name, individual’s full name, social security account number, date and place of birth, date, citizenship, to SRS-36 Security Officer. Contractor is required to maintain an accurate worksite access list throughout the period of contract.

g. Contractor will adhere to personnel’s worksite access requirements as stated above when hiring subcontractor or temporary service personnel.

h. Visitors and delivery personnel who do not possess a clearance or a trustworthiness determination are required to be escorted while inside the WRA or Site VI piers, and must consent to NCIC background check before being granted access to

Submarine Base, Kings Bay, GA.

i. A limited number of Contractor personnel may be authorized WRA escort privileges upon favorable completion of trustworthiness determination process or with an approved security clearance. Escorts will exercise positive control of personnel while within restricted areas, or the designated escort and unescorted personnel will be ejected from the restricted area. If required due to time constraints, the government may provide this service until such time the contactor is capable of assumption.

11.5. Vehicle Permits:

a. All vehicles entering any naval activity are required to obtain a permit in accordance with facility regulations. The vehicle permits can be obtained from the

Engineering Service Building (ESB), Building 6005. Vehicles will be required to have a company logo or identification visible on both sides. All Contractor vehicles and equipment, when not in use, shall be locked or removed from the facility or otherwise disabled or secured preventing unauthorized operation.

b. Submit Form SWFLANT 5530/57 (Rev. 03/21) (Must use latest revision)

RESTRICTED AREA VEHICLE ACCESS REQUEST for vehicle entry to

SWFLANT Restricted Area; all vehicles, company and personnel, must be processed for vehicle passes. The following information will be requested by

SWFLANT located at ESB, building 6005, prior to issuance of vehicle passes.

(1) Current registration.

(2) Valid driver’s license.

(3) Proof of vehicle insurance.

(4) Valid rental agreement.

c. Parking will not be permitted on the waterfront. Access will be permitted for loading and unloading only.

Note 1: The Commercial Vehicle Inspection Station is located immediately inside the Franklin Gate. Security personnel at the Vehicle

Inspection station will search all Contractor vehicles. Contraband, i.e. drugs, alcohol, weapons, illegal substances, etc. are prohibited on SUBASE Kings Bay.

Note 2: If any issues arise with security force personnel, be compliant.

Notify the prime contractor or Navy Crane Center for proper handling of the situation as soon as possible. Do not confront, intimidate, harass, or otherwise interfere with security force personnel. Any of the previously mentioned actions may result in a security violation and subsequent removal from the installation.

11.6 Installation Material and Equipment Deliveries:

a. Material deliveries to the worksite other than government authorized vehicles, provide name of company, name of driver, U.S. citizenship, vehicle information, purpose of delivery, actual date, time, point of contact (including phone number) and description of load material on government provided Restricted Area Vehicle Access Request

(RAVAR) form to TRF-KB

Security Office. Notification should be at least three working day prior to expected arrival.

b. No privately owned vehicles, including rental cars are allowed access to the WRA or Site Six pier.

c. Commercial vehicles making deliveries to installation sites on SUBASE Kings

Bay must enter the base via the Franklin (Contractor’s) Gate. All commercial vehicle drivers that enter SUBASE Kings Bay must first complete all required security forms as discussed in paragraphs 4.1 and 4.2.

d. Shipping Documents: Deliveries of installation materials and/or equipment required for this contract shall carry a shipping document identifying, as a minimum, the material or equipment to be delivered, the specific location of the delivery, the Prime

Contractor’s name, the Subcontractor’s name, and the Contracting Officer or appointed representative’s name and telephone number.

11.7. Gate Information:

a. Franklin Gate (Pass & I.D.) Hours - St. Mary’s Road

- Badge Office Hours: Open 6:00am until 2:30pm Monday through Friday. Closed

Weekends and Holidays. Gate Hours: Open 5:00am Monday through 6:00pm Friday.

Closed Weekends and Holidays.

b. Stimson Gate (Main) Hours - Kings Bay Road

- Badge Office Hours: Open 7:00am until 3:30pm Monday through Thursday.

Closed Fridays, Weekends and Holidays. Gate Hours: Open 5:00am until 6:30pm Monday through Thursday Open 5:30am Friday until 6:30pm Monday. Monday – Friday:

Contractor to obtain a badge and enter base at Franklin Gate.

Saturday – Sunday, Holidays: Contractor to enter base at Stimson Gate.

Contact: Franklin Pass and I.D. Office (912) 573-8609/8610/8612 if you have questions or need additional information.

11.8. Cameras. No cameras, including cell phone cameras, are allowed inside

Trident Refit Facility (TRIREFFAC) Kings Bay, Kings Bay, GA. Photography by the Contractor is prohibited. Construction progress photos, and all other necessary photo documentation, will be provided by authorized Government personnel only.

11.9. Portable Computer Equipment. Authority to operate computer systems on

TRIREFFACKB must be granted by TRIREFFAC-KB Code 600, IT Department and SWFLANT.

11.10. Prohibited Items. Contractors are prohibited from bringing onto federal property the following items:

a. All forms of alcohol and illegal drugs.

b. Shotguns, handguns, machineguns, firearm silencers, ammunition of any type, blasting caps or similar items of explosive material (i.e. fireworks), starter or flare pistols, pellet or BB guns, dynamite, teargas and their dispensing devices, and other similar devices.

c. Construction tools that require use of explosive materials are authorized if they are required to perform approved duties. Contractors who require one of the prohibited items listed above may bring the item onto the installation in performance of the contract (i.e., bird control, wildlife management, etc.), but only when specified in the contract.

d. Any blades in excess of three inches, switch blade knives, underwater spear guns, bows and arrows, crossbows, slingshots and blowguns, throw blade knives, blackjacks, nightsticks, clubs, brass knuckles, tomahawks, swords, bolas, fighting sticks, throwing discs, chains, and other similar items that can be used as a weapon.

e. Cameras, camcorders, cell phones with cameras, computers or tablets with cameras, etc.

f. Smoking is only permitted in designated areas.

11.11. Computer Access. If a laptop or tablet computer is required for performance of this statement of work, TRIREFFAC-KB information security must approve admission of the computer to the facility. The contractor shall submit a written and signed request on company letterhead at least 5 business days prior to start date to TRIREFFAC-KB Code 600, IT Department. The request shall contain the following information:

a. Shipyard point of contact: (Name, Code and Phone number)

b. Purpose for request: (Provide detailed explanation)

c. Area where equipment will be used:

(1) Shop/engineering Codes.

(2) Facility/Crane location on installation

d. Type of equipment

(1) Type (Laptop, Tablet, etc.) (2) Make, Model and Serial numbers.

(3) Company asset number (if any)

(4) How the equipment will be delivered (Hand carried, mail)

e. Duration of visit (arrival date - departure date

11.11 Access to the Submarine requires SECRET access.