Attachment 0006 QUALITY ASSURANCE PROVISIONS 11-1-2801 CLEVIS ASSEMBLY.pdf
PDF 196 KB Posted
- Attached to
- Solicitation for G15 Cargo Parachute, Bag, Cargo Aerial Delivery A-24, Parachute, Cargo Extraction Assembly
- Solicitation number
- W912CH-24-R-0026
About this file
This document is a Quality Assurance Provisions document for a Clevis Assembly product, part number 11-1-2801. The key details are:
The document outlines the inspection and acceptance criteria for the Clevis Assembly, including requirements for first article inspection, conformance sampling, visual examinations, and dimensional examinations. It specifies the classification of visual nonconformities and notes that any nonconformity shall be cause for rejection of the lot. The contractor must submit a quality plan detailing the inspection methods prior to first article inspection. Nonconformities not listed in the document will be classified by the procuring activity.
View the file
Other files
Show all 32
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
11 Feb 2020
Quality Assurance Provisions:
“Clevis Assembly”
P/N: 11-1-2801
1. First Article Inspection (FAI). The FAI includes:
a. A review of material Certifications of Compliance.
b. End item visual examination (see 3.3).
c. End item dimensional examination (see 3.4).
2. Acceptance/rejection criteria for the FAI. Materials not as specified, any visual nonconformity, and any dimension out of tolerance shall be cause for rejection of the
FAI.
3. Conformance inspection.
3.1 Sampling. Sampling shall be performed in accordance with ANSI/ASQ Z1.4.
3.2 Conformance inspection. The end items shall be examined for materials and the visual/dimensional nonconformities (see 3.3 and 3.4). The lot size shall be expressed in units of “Clevis Assembles”. The sample unit shall be one “Clevis Assembly”.
The inspection level shall be S-4 except that no sample shall contain less than 10 assemblies.
3.3 End item visual examination. The end items shall be examined for the nonconformities listed in Table I. Any nonconformity shall be cause for rejection of the lot.
TABLE I. End item visual nonconformities
Classification Examine Defect_ Major Minors
Materials Not as specified 101
Heat Treatment Omitted or not as specified 102
Finish Omitted or not type specified 103 An breaks through coating to metal 104
Any evidence of corrosion 105 Dirt, oil, grease or other foreign matter 201
Method of Forming Not as specified 106
Surface Roughness Omitted or not as specified 107
DISTRIBUTION STATEMENT A
THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED.
11 Feb 2020
Quality Assurance Provisions:
“Clevis Assembly”
P/N: 11-1-2801
TABLE I cont. End item visual nonconformities
Classification Examine Defect_ Major Minors
Construction and Any component cracked, malformed, Workmanship misaligned or damaged 108
Sharp edges, burrs, or metal slivers, components incorrectly assembled, loose or missing 109
Identification Missing, incomplete, illegible, improper location, or not as specified 202
3.4. End Item Dimensional Examination. The contractor shall submit a quality plan to the government for approval prior to the FAI. The plan must detail methods of inspections to insure the items are manufactured and tested to the requirements of the Technical Data Package. The end item critical dimensions shall be inspected as specified in the standard. Any non-conforming dimensions shall be cause for the rejection of the lot.
4.0 Classification of nonconformities. Classification of nonconformities not listed in Table 1 shall be as specified by the procuring activity.
DISTRIBUTION STATEMENT A
THIS DOCUMENT IS APPROVED FOR PUBLIC RELEASE, DISTRIBUTION IS UNLIMITED.
File details come from the government source that posted it. Updated .