Att3 Solicitation Provisions and Clauses.pdf
PDF 128 KB Posted
- Attached to
- B330 Mold Remediation
- Solicitation number
- W50S9B26Q0022
- Issued by
-
Department of the Army National Guard
About this file
This document is a clauses list for federal contract W50S9B26Q0022, incorporating by reference and providing in full text the standard and special contract clauses applicable to the procurement.
The contract includes comprehensive clauses addressing compliance, security, and operational requirements across multiple domains. Key compliance areas include safeguarding covered defense information and cyber incident reporting (252.204-7012), prohibition on acquisition of covered defense telecommunications equipment or services (252.204-7018 and 252.204-7017), and restrictions on business operations with the Maduro regime and Xinjiang Uyghur Autonomous Region (252.225-7056 and 252.225-7060). Security-related clauses address prohibited parties and exclusions (52.240-91), with alternate provisions allowing the contracting officer to designate applicable FASCSA orders from DHS, DoD, or DNI. Payment and invoicing procedures utilize the Wide Area Workflow (WAWF) system with specific routing data codes (Pay Official DoDAAC F87700, Issue By/Admin DoDAAC W50S9B), while additional clauses govern electronic fund transfers, material and workmanship standards, site conditions, and construction wage rate requirements for labor-intensive work. The contract incorporates commercial products and services terms, small business set-aside provisions (52.219-6), sustainable products requirements, and options for increased quantities with exercise deadline of 30 September 2026. Evaluation criteria for award include price and technical factors, with past performance as an additional consideration. Construction-related clauses address differing site conditions, accident prevention, utility services, and protection of existing vegetation and structures.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| Q and A3 21 Sep 26.docx | DOCX document | |
| w50s9b26q0022 amendment_0001.pdf | ||
| Att 7 Project Staging and Laydown Request Form B330.pdf | ||
| Q and A2 B330 BREAK RM 17SEP26.docx | DOCX document | |
| Att 6 B330 Mec RM AHU_Trane Brand.pdf | ||
| Q and A1 B330 Mold Remediation.docx | DOCX document | |
| Combined_Synopsis_Solicitation W50S9B26Q0022.docx | DOCX document | |
| Att1 SOW MUHJ 26-2011 Restore Break RM B330.docx | DOCX document | |
| Att 2 Existing Floor Plan and Existing Site Conditions.pdf | ||
| Att 4 WD VA20260022.pdf | ||
| Att5 JBLE FORM 1 - MAY 2025 (V5).pdf |
Show all 11
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DOCUMENT NUMBER
W50S9B26Q0022
CLAUSES INCORPORATED BY REFERENCE
CLAUSE
NO
ALT NO/
DEV NO
CLAUSE TITLE YEAR-
MO
SECTION
252.203-7000 Requirements Relating to Compensation of Former DoD
Officials.
2011-09 SEC I
252.203-7002 Requirement to Inform Employees of Whistleblower Rights. 2022-12 SEC I
252.203-7005 Representation Relating to Compensation of Former DoD Officials.
2022-09 SEC K
252.204-7008 Compliance with Safeguarding Covered Defense Information Controls.
2016-10 SEC K
252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting.
2024-05 SEC I
252.204-7018 Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
2023-01 SEC I
252.204-7024 Notice on the Use of the Supplier Performance Risk System. 2023-03 SEC L 252.223-7008 Prohibition of Hexavalent Chromium. 2023-01 SEC I
252.225-7055 Representation Regarding Business Operations with the Maduro Regime.
2022-05 SEC K
252.225-7056 Prohibition Regarding Business Operations with the Maduro Regime.
2023-01 SEC I
252.225-7059 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region-Representation.
2023-06 SEC K
252.225-7060 Prohibition on Certain Procurements from the Xinjiang Uyghur Autonomous Region.
2023-06 SEC I
252.232-7003 Electronic Submission of Payment Requests and Receiving Reports.
2018-12 SEC G
252.232-7010 Levies on Contract Payments. 2006-12 SEC I 252.236-7000 Modification Proposals--Price Breakdown. 1991-12 SEC G 252.247-7023 Transportation of Supplies by Sea. 2024-10 SEC I
52.203-18 Prohibition on Contracting with Entities that Require Certain
Internal Confidentiality Agreements or Statements- Representation.
2017-01 SEC L
52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements.
2017-01 SEC I
52.204-13 System for Award Management-Maintenance. (Deviation 2026-O0038)
2026-02 SEC I
52.204-7 System for Award Management-Registration. (Deviation 2026- O0038)
2026-02 SEC L
52.209-10 Prohibition on Contracting With Inverted Domestic Corporations. (Deviation 2026-O0038)
2026-02 SEC I
52.219-6 Notice of Total Small Business Set-Aside. (Deviation 2026- O0038)
2026-02 SEC I
52.222-50 Combating Trafficking in Persons. (Deviation 2026-O0038) 2026-02 SEC I
52.222-90 Addressing DEI Discrimination by Federal Contractors.
(Deviation 2026-O0040, Revision 1)
2026-04 SEC I
52.223-23 Sustainable Products. (Deviation 2026-O0038) 2026-02 SEC I
52.226-8 Encouraging Contractor Policies to Ban Text Messaging While Driving.
2024-05 SEC I
52.232-33 Payment by Electronic Funds Transfer-System for Award Management.
2018-10 SEC I
52.232-40 Providing Accelerated Payments to Small Business Subcontractors.
2023-03 SEC I
52.233-3 Protest after Award. (Deviation 2026-O0038) 2026-02 SEC I
52.233-4 Applicable Law for Breach of Contract Claim. (Deviation 2026-O0038)
2026-02 SEC I
52.236-5 Material and Workmanship. (Deviation 2026-O0038) 2026-02 SEC I 52.236-7 Permits and Responsibilities. (Deviation 2026-O0038) 2026-02 SEC I
52.240-90 Security Prohibitions and Exclusions Representations and Certifications. (Deviation 2026-O0038)
2026-02 SEC K
52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038) 2026-02 SEC I
52.212-1 Instructions to Offerors-Commercial Products and Commercial Services. (Deviation 2026-O0038)
2026-02 SEC L
52.212-4 Terms and Conditions-Commercial Products and Commercial Services. (Deviation 2026-O0038)
2026-02 SEC I
52.222-3 Convict Labor. (Deviation 2026-O0038) 2026-02 SEC I 52.236-2 Differing Site Conditions. (Deviation 2026-O0038) 2026-02 SEC I
52.236-3 Site Investigation and Conditions Affecting the Work.
(Deviation 2026-O0038)
2026-02 SEC I
52.236-6 Superintendence by the Contractor. (Deviation 2026-O0038) 2026-02 SEC I 52.236-8 Other Contracts. (Deviation 2026-O0038) 2026-02 SEC I
52.236-9 Protection of Existing Vegetation, Structures, Equipment, Utilities, and Improvements. (Deviation 2026-O0038)
2026-02 SEC I
52.236-10 Operations and Storage Areas. (Deviation 2026-O0038) 2026-02 SEC I 52.236-12 Cleaning Up. (Deviation 2026-O0038) 2026-02 SEC I 52.236-13 Accident Prevention. (Deviation 2026-O0038) 2026-02 SEC I 52.217-5 Evaluation of Options. (Deviation 2026-O0038) 2026-02 SEC M
52.236-14 Availability and Use of Utility Services. (Deviation 2026- O0038)
2026-02 SEC I
CLAUSES IN FULL TEXT
CLAUSE
NO
CLAUSE TITLE ALT NO/
DEV NO
YEAR-
MO
CLAUSE TEXT
252.204-7017 Prohibition on the Acquisition of Covered Defense
Telecommunications Equipment or Services-Representation.
2021-05
PROHIBITION ON THE ACQUISITION OF COVERED DEFENSE TELECOMMUNICATIONS
EQUIPMENT OR SERVICES-REPRESENTATION (MAY 2021)
The Offeror is not required to complete the representation in this provision if the Offeror has represented in the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument."
(a) . "Covered defense telecommunications equipment or services," "covered mission,"Definitions "critical technology," and "substantial or essential component," as used in this provision, have the meanings given in the 252.204-7018 clause, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services, of this solicitation.
(b) . Section 1656 of the National Defense Authorization Act for Fiscal Year 2018Prohibition (Pub. L. 115-91) prohibits agencies from procuring or obtaining, or extending or renewing a contract to procure or obtain, any equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system.
(c) . The Offeror shall review the list of excluded parties in the System for Award Procedures Management (SAM) at for entities that are excluded when providing any https://www.sam.gov equipment, system, or service to carry out covered missions that uses covered defense telecommunications equipment or services as a substantial or essential component of any system, or as critical technology as part of any system, unless a waiver is granted.
(d) . If in its annual representations and certifications in SAM the Offeror has Representation represented in paragraph (c) of the provision at 252.204-7016, Covered Defense Telecommunications Equipment or Services-Representation, that it "does" provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument, then the Offeror shall complete the following additional representation:
The Offeror represents that it will will not provide covered defense telecommunications equipment or services as a part of its offered products or services to DoD in the performance of any award resulting from this solicitation.
(e) . If the Offeror has represented in paragraph (d) of this provision that it "will Disclosures provide covered defense telecommunications equipment or services," the Offeror shall provide the following information as part of the offer:
(1) A description of all covered defense telecommunications equipment and services offered (include brand or manufacturer; product, such as model number, original equipment manufacturer (OEM) number, manufacturer part number, or wholesaler number; and item description, as applicable).
(2) An explanation of the proposed use of covered defense telecommunications equipment and services and any factors relevant to determining if such use would be permissible under the prohibition referenced in paragraph (b) of this provision.
(3) For services, the entity providing the covered defense telecommunications services (include entity name, unique entity identifier, and Commercial and Government Entity (CAGE) code, if known).
(4) For equipment, the entity that produced or provided the covered defense telecommunications equipment (include entity name, unique entity identifier, CAGE code, and whether the entity was the OEM or a distributor, if known).
(End of provision)
252.232-7006 Wide Area WorkFlow Payment Instructions. 2023-01
WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)
(a) As used in this clause- Definitions.
"Department of Defense Activity Address Code (DoDAAC)" is a six position code that uniquely identifies a unit, activity, or organization.
"Document type" means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF).
"Local processing office (LPO)" is the office responsible for payment certification when payment certification is done external to the entitlement system.
"Payment request" and "receiving report" are defined in the clause at 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(b) The WAWF system provides the method to electronically process Electronic invoicing.
vendor payment requests and receiving reports, as authorized by Defense Federal Acquisition Regulation Supplement (DFARS) 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports.
(c) To access WAWF, the Contractor shall- WAWF access.
(1) Have a designated electronic business point of contact in the System for Award Management at https://www.sam.gov; and
(2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this web site.
(d) The Contractor should follow the training instructions of the WAWF Web- WAWF training.
Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/
(e) Document submissions may be via web entry, WAWF methods of document submission.
Electronic Data Interchange, or File Transfer Protocol.
(f) The Contractor shall use the following information when WAWF payment instructions.
submitting payment requests and receiving reports in WAWF for this contract or task or delivery order:
(1) The Contractor shall submit payment requests using the following Document type.
document type(s):
(i) For cost-type line items, including labor-hour or time-and-materials, submit a cost voucher.
(ii) For fixed price line items-
(A) That require shipment of a deliverable, submit the invoice and receiving report specified by the Contracting Officer.
(Contracting Officer: Insert applicable invoice and receiving report document type(s) for fixed price line items that require shipment of a deliverable.)
(B) For services that do not require shipment of a deliverable, submit either the Invoice 2in1, which meets the requirements for the invoice and receiving report, or the applicable invoice and receiving report, as specified by the Contracting Officer.
(Contracting Officer: Insert either "Invoice 2in1" or the applicable invoice and receiving report document type(s) for fixed price line items for services.)
(iii) For customary progress payments based on costs incurred, submit a progress payment request.
(iv) For performance based payments, submit a performance based payment request.
(v) For commercial financing, submit a commercial financing request.
(2) ) Fast Pay requests are only permitted when Federal Acquisition Regulation (FAR) 52.213-1 is included in the contract.
[Note: The Contractor may use a WAWF "combo" document type to create some combinations of invoice and receiving report in one step.]
(3) The Contractor shall use the information in the Routing Data Table Document routing.
below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system.
Routing Data Table*
Field Name in WAWF Data to be entered in WAWF
Pay Official DoDAAC F87700
Issue By DoDAAC W50S9B
Admin DoDAAC W50S9B
Inspect By DoDAAC ____
Ship To Code ____
Ship From Code ____
Mark For Code ____
Service Approver (DoDAAC) ____
Service Acceptor (DoDAAC) ____
Accept at Other DoDAAC ____
LPO DoDAAC ____
DCAA Auditor DoDAAC ____
Other DoDAAC(s) ____
(*Contracting Officer: Insert applicable DoDAAC information. If multiple ship to/acceptance locations apply, insert "See Schedule" or "Not applicable.")
(**Contracting Officer: If the contract provides for progress payments or performance-based payments, insert the DoDAAC for the contract administration office assigned the functions under FAR 42.302(a)(13).)
(4) The Contractor shall ensure a payment request includes documentationPayment request.
appropriate to the type of payment request in accordance with the payment clause, contract financing clause, or Federal Acquisition Regulation 52.216-7, Allowable Cost and Payment, as applicable.
(5) The Contractor shall ensure a receiving report meets the requirementsReceiving report.
of DFARS Appendix F.
(g) WAWF point of contact.
(1) The Contractor may obtain clarification regarding invoicing in WAWF from the following contracting activity's WAWF point of contact.
(Contracting Officer: Insert applicable information or "Not applicable.")
(2) Contact the WAWF helpdesk at 866-618-5988, if assistance is needed.
(End of clause)
252.236-7001 Contract Drawings and Specifications. 2000-08
CONTRACT DRAWINGS AND SPECIFICATIONS (AUG 2000)
(a) The Government will provide to the Contractor, without charge, one set of contract drawings and specifications, except publications incorporated into the technical provisions by reference, in electronic or paper media as chosen by the Contracting Officer.
(b) The Contractor shall-
(1) Check all drawings furnished immediately upon receipt;
(2) Compare all drawings and verify the figures before laying out the work;
(3) Promptly notify the Contracting Officer of any discrepancies;
(4) Be responsible for any errors that might have been avoided by complying with this paragraph (b); and
(5) Reproduce and print contract drawings and specifications as needed.
(c) In general--
(1) Large-scale drawings shall govern small-scale drawings; and
(2) The Contractor shall follow figures marked on drawings in preference to scale measurements.
(d) Omissions from the drawings or specifications or the misdescription of details of work that are manifestly necessary to carry out the intent of the drawings and specifications, or that are customarily performed, shall not relieve the Contractor from performing such omitted or misdescribed details of the work. The Contractor shall perform such details as if fully and correctly set forth and described in the drawings and specifications.
(e) The work shall conform to the specifications and the contract drawings identified on the following index of drawings:
Title File Drawing No.
(End of clause)
52.240-91 Security Prohibitions and Exclusions. (Deviation 2026-O0038)
(Alternate I)
ALT I 2026-02
Alternate I (FEB 2026) (DEVIATION 2026-O0038). As prescribed in 40.205(b), substitute the following paragraph (e)(1) for paragraph (e)(1) of the basic clause:
(e) .Governmentwide exclusion and removal orders
(1) Contractors are prohibited from providing or using as part of the performance of the contract any covered article, or any products or services produced or provided by a source, if the covered article or the source is prohibited by any applicable FASCSA orders identified by the checkbox(es) in this paragraph (e)(1). [Contracting Officer must select either "yes" or "no" for each of the following types of :]FASCSA orders
Yes
No
DHS FASCSA Order
Yes
No
DoD FASCSA Order
Yes
No
DNI FASCSA Order
52.217-7 Option for Increased Quantity-Separately Priced Line Item. 1989-03
Option for Increased Quantity-Separately Priced Line Item (MAR 1989)
The Government may require the delivery of the numbered line item, identified in the Schedule as an option item, in the quantity and at the price stated in the Schedule. The Contracting Officer may exercise the option by written notice to the Contractor within [insert in the clause the period of 30 September 2026 time in which the Contracting Officer has to exercise the option]. Delivery of added items shall continue at the same rate that like items are called for under the contract, unless the parties otherwise agree.
(End of clause)
52.212-2 Evaluation-Commercial Products and Commercial Services.
(Deviation 2026-O0038) 2026-02
Evaluation-Commercial Products and Commercial Services (Feb 2026) (Deviation 2026-O0038)
(a) Evaluation factors. The Government will award a contract resulting from this solicitation to the responsible Offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors will be used to evaluate offers:
[Insert evaluation factors in the relative order of importance. For requests for proposals, state:
Evaluation factors other than price when combined are [significantly more important than price /approximately equal to price/significantly less important] than price. For invitations for bids, list only price and price-related factors.]
Price
Technical
Past Performance
(b) . The Government will evaluate offers for award purposes by adding theOptions (if applicable) total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. The evaluation of options does not obligate the Government to exercise the option(s).
(c) . A written notice of award or acceptance of an offer furnished to the successfulNotice of award Offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award.
(End of provision)
252.204-7016 Covered Defense Telecommunications Equipment or Services-
Representation.
2019-12
COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES-
REPRESENTATION (DEC 2019)
(a) . As used in this provision, "covered defense telecommunications equipment orDefinitions services" has the meaning provided in the clause 252.204-7018, Prohibition on the Acquisition of Covered Defense Telecommunications Equipment or Services.
(b) . The Offeror shall review the list of excluded parties in the System for AwardProcedures Management (SAM) ( ) for entities excluded from receiving federal awards for https://www.sam.gov "covered defense telecommunications equipment or services".
(c) . The Offeror represents that itRepresentation does, does not provide covered defense telecommunications equipment or services as a part of its offered products or services to the Government in the performance of any contract, subcontract, or other contractual instrument.
(End of provision)
ADDITIONAL CLAUSES INCORPORATED
BY REFERENCE
CLAUSE NO CLAUSE TITLE
52.204-19 Incorporation by Reference of Representations and Certifications 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction under any Federal Law 52.222-6 Construction Wage Rate Requirements 52.222-7 Withholding of Funds 52.222-8 Payrolls and Basic Records 52.222-9 Apprentices and Trainees 52.222-10 Compliance with Copeland Act Requirements 52.222-11 Subcontracts (Labor Standards) 52.222-12 Contract Termination-Debarment 52.222-13 Compliance with Construction Wage Rate Requirements and Related Regulations 52.222-14 Disputes Concerning Labor Standards 52.222-15 Certification of Eligibility 52.242-14 Suspension of Work 52.244-6 Subcontracts for Commercial Products and Commercial Services
Blank Page
File details come from the government source that posted it. Updated .