Rev._Sections_08710_09650_11451.pdf

Mt Hebron Barracks Complex 175

DOOR HARDWARE 08710 (Amendment 4)

3.03 HARDWARE SCHEDULE

A. The following manufacturers are used for reference in the hardware schedule:

Group 1

1½ Pair butts Hager BB1191-NRP

1 Lock Schlage ND53PD-RHO-626

1 Closer Dorma 8900

1 Threshold Pemko 195A

1 Threshold Pemko 19325A

1 Kickplate Triangle Brass 10x34

1 Doorstop Glynn-Johnson WB33

1 Sweep Reese Enterprises DB595FA

1 Seal Reese Enterprises DS75A

Group 2

1½ Pair butts Hager BB1279

1 Push Plate Triangle Brass 7001

1 Pull Triangle Brass 7140

1 Closer Dorma 8600

1 Door Stop Glynn-Johnson WB33

Group 3

1½ Pair butts Hager BB1279

1 Lock Schlage D80PD-RHO-626

Group 4

3 Pair butts Hager BB1279

1 Lock Schlage D80PD-RHO-626

2 Flush Bolt Hager 283D-US26D

Group 5

1½ Pair butts Hager BB1279

1 Lock Schlage ND53PD-RHO-626

1 Door Stop Glynn-Johnson WB33

Group 6

2 Door Pull Trimco 1193-2

**END OF SECTION 08710**

Ken_Bobbie Polygon

Ken_Bobbie Polygon

Mt Hebron Barracks Complex 189 a

RUBBER BASE 09650

SECTION 09650

RUBBER BASE

PART 1 - GENERAL

1.01 SCOPE

A. Extent of rubber base is shown on drawings and in schedules.

1.02 QUALITY ASSURANCE

A. Manufacturer: Provide product of a single manufacturer, including recommended adhesives.

1.03 SUBMITTALS

A. Product Data: Submit manufacturer's technical data under provisions of Section

01300.

B. Samples for Verification Purposes:

1. Full size rubber base sample ring with all standard colors.

1.04 PROJECT CONDITIONS

A. Maintain minimum temperature of 65oF (18oC) in spaces to receive rubber base for at least 48 hours prior to installation, during installation, and for not less than 48 hours after installation. Store materials in spaces where they will be installed for at least 48 hours before beginning installation. Subsequently, maintain minimum temperature of 55oF (13oC) in areas where work is completed.

B. Install rubber base after other finishing operations, including painting, have been completed.

PART 2 - PRODUCTS

2.01 ACCEPTABLE MANUFACTURERS

A. Available Manufacturers: Subject to compliance with requirements, manufacturers offering products which may be incorporated in the work include, but are not limited to, the following:

1. Manufacturers of Rubber base:

a. Roppe

b. Burke

c. Allstate

Mt Hebron Barracks Complex 189 b

RUBBER BASE 09650

2.02 BASE MATERIALS

A. Base: ASTM F1861, Type TS rubber, Group 1 solid; Style B coved; 4 inch high;

0.125 inch thick; asbestos free; top set, in maximum practical lengths.

PART 3 - EXECUTION

3.01 INSTALLATION- BASE MATERIAL

A. Fit joints tight and vertical.

B. Install material in maximum practical lengths.

C. Maintain minimum measurement of 18 inches between joints.

D. Miter internal corners.

E. Field wrap external corners with longest practical lengths. “V” cut surface to 2/3 its thickness.

F. Install base on solid backing. Bond tight to wall and floor surfaces.

G. Scribe and fit to door frames and other interruptions.

**END OF SECTION 09650**

Mt Hebron Barracks Complex

RESIDENTIAL APPLIANCES/FURNITURE 11451 (Amendment 4)

SECTION 11451

RESIDENTIAL APPLIANCES/FURNITURE

PART 1 GENERAL

1.1 SECTION REQUIREMENTS

A. Submittals: Product Data.

PART 2 PRODUCTS

2.1 RESIDENTIAL APPLIANCES

A. Electric Range (Free standing range, variable rotary knobs or dials with front location, smooth ceramic cooktop with four radiant heating elements, self-cleaning, oven door with see through window, 240 Volts, 60 Hz, AC single phase power requirements, Color: White): General Electric, Whirlpool, Maytag, Kenmore, Amana Model, or equivalent..

B. Range Hood (Rectangular Thru Wall Ducted, minimum 160 CFM, 30 inches wide, multiple speed, back-draft damper with light, 115 Volt, 60 Hz. AC Single phase, Color: White): General Electric Model # JV338HWW, or equivalent Whirlpool, Kenmore.

C. Not Used.

D. Microwave Oven (1.8 cu. ft. or larger counter top microwave oven with turntable, 1,100 Watt rating, variable cooking levels with electronic controls, 115 Volt, 60

Hz., AC single phase, Color: White): Amana, General Electric, Whirlpool, Kitchen-Aid, or equivalent.

E. Side-by-Side Refrigerator/Freezer (Freestanding, 25 cu. ft. or larger, maximum 36 inches wide, through door ice and water with water filtration, spill saver adjustable glass shelves, 115 Volts, 60 Hz, AC single phase, Energy Star

Rated, Color: White): Amana Distinctions, Maytag, General Electric Energy

Star, Whirlpool Gold, Kitchen-Aid, Kenmore Elite, or equivalent.

F. Clothes Washing Machine: (Top loading 3.0 cu. ft. or larger, stainless steel wash tub, porcelain top and lid, multiple wash/spin cycle and temperature settings, Energy Star Compliant, 115 Volt, 60 Hz, AC single phase, Color: White,). Maytag

Atlantis, Kitchen-Aid Super Capacity Washer, Amana, Kenmore Elite, or equivalent NOTE: Match washer and dryer as a set made by the same manufacturer.

G. Electric Clothes Dryer (Front loading 7.0 cu. ft. capacity or larger, multiple cycles and temperature settings, electronic drying sensor, porcelain top, mechanical controls, drum light, 240 Volt, 60 Hz, Ac single phase, Color: White):

Mt Hebron Barracks Complex

RESIDENTIAL APPLIANCES/FURNITURE 11451 (Amendment 4)

Maytag Centennial Electric Dryer, Kenmore Electric Dryer, GE Electric Dryer, or equivalent. NOTE: Match washer and dryer as a set made by the same manufacturer.

H. Ceiling Fan (52 inch diameter, 5-blades, multiple speed, reversible operation, 115

Volt, 60 Hz, AC single phase, Color: White): Harbor Breeze Builders Best, Hunter

Silent Breeze, or equivalent.

3. PART 3 EXECUTION

3.1 INSTALLATION

A. Built-in Appliances: Securely anchor to supporting cabinetry or countertops with concealed fasteners. Verify that clearances are adequate for proper functioning and rough openings are completely concealed.

B. Freestanding Appliances: Place in final locations after finishes have been completed in each area. Verify that clearances are adequate to properly operate equipment.

**END OF SECTION 11451**