Addendum 2_Attachmen 1.pdf

5525 Nobel Drive, Suite 110 | Madison, WI 53711 | 608.277.1728 | www.jdrengineering.com

SHOP DRAWING REVIEW

This review is limited to checking for general conformance with the design concept, and for general compliance with information given in the Construction Documents. Corrections or comments made on these shop drawings do not relieve the contractor from the obligation to comply with the requirements of the drawings and specifications. Approval of a specific item shall not constitute approval of an assembly in which the item is a component. Contractor is responsible for: confirming and correlating all dimensions and quantities; information that pertains solely to the fabrication processes; the means, methods, techniques, sequences and procedures of construction; performing work in a safe and satisfactory manner; and coordinating work with that of all other trades.

Project Name: SSCG Phase 1 Date: 03/22/2024

Project No: 22.0249 Reviewed By: Joe Mullvain

Description: 28 13 00 Access Control

A p p ro v e d

A p p ro v e d a s

C o rr e ct

R

-v is e a n d

R e su b m it

R je ct ed

S u b m it S p e ci fi e d

I te m

S u b m it ta l N o t

R e q u e st e d

R e tu rn n o t

R e v ie w

Item No. References Comments

☒ ☐ ☐ ☐ ☐ ☐ 1 Keyscan Door

Controller No objections.

☒ ☐ ☐ ☐ ☐ ☐ 2 Access Control Panel No objections.

☒ ☐ ☐ ☐ ☐ ☐ 3 Elevator Control

Panels No objections.

☒ ☐ ☐ ☐ ☐ ☐ 4 Access Control Power

Supply No objections.

☒ ☐ ☐ ☐ ☐ ☐ 5 Communication

Modules No objections.

☒ ☐ ☐ ☐ ☐ ☐ 6 Lead Acid Battery No objections.

☒ ☐ ☐ ☐ ☐ ☐ 7 Reader/Keypad No objections.

☒ ☐ ☐ ☐ ☐ ☐ 8 Cabinet Locks No objections.

☒ ☐ ☐ ☐ ☐ ☐ 9 Control Wire No objections.

☒ ☐ ☐ ☐ ☐ ☐ 10 J-Hooks No objections.

☐ ☒ ☐ ☐ ☐ ☐ 11 Balance of Submittal Confirm final requirements with Owner IT/security group.

☐ ☐ ☐ ☐ ☐ ☐ 12

9361-State St Campus Garage Mixed-Use Project-CONS #81-Access Control SD & PD

Created by Joe Mullvain with Autodesk® Construction Cloud™ on Mar 22, 2024 at 3:40 PM CDT Page 1 of 3

Submittal item detail

#28 13 00-81-0: Access Control SD & PD

Status Created on Due date

Open In Review

Mar 4, 2024 Mar 27, 2024

ID 227

Ball in court Joe Mullvain (JDR Engineering Inc.)

Michael Jochman (JDR Engineering Inc.)

Rachel Steffen (EUA (Eppstein Uhen Architects, Inc.)) Todd King (EUA (Eppstein Uhen Architects, Inc.))

DESIGN-A/E-PROJ MGR

Manager DESIGN-A/E-PROJ MGR

Responsible contractor CONTRACTOR-GC-PROJ MGR

Watchers PROJECT USERS

Spec section 28 13 00 Electronic Safety and Security

Spec sub section

Description Access Control SD & PD

Final Response

Final Response Attachments

Final Response Comments

Package https://acc.autodesk.com/build/submittals/projects/096dc208-2e01-49e8-ae16-9afe0638c914/items?preview=a94842db-ed03-4db5-9bdc-d5c4ed2b6217&tab=overview https://acc.autodesk.com/build/submittals/projects/096dc208-2e01-49e8-ae16-9afe0638c914/items?preview=a94842db-ed03-4db5-9bdc-d5c4ed2b6217&tab=overview

Created by Joe Mullvain with Autodesk® Construction Cloud™ on Mar 22, 2024 at 3:40 PM CDT Page 2 of 3

Ball in court Sent Due Returned Response/Action Attachments

Submitted

CONTRACTOR-GC-PROJ

MGR

Submitted by Tyler Welch

Mar 4, 2024 May 19, 2024 Mar 20, 2024 Submitted 28 13 00-1 Access Control PD.pdf

Comments -

Sent for review

DESIGN-A/E-PROJ MGR

Sent by Justin Krajci

Mar 20, 2024 Jun 2, 2024 Mar 20, 2024 Sent for review 28 13 00-1 Access Control PD.pdf

Comments -

Review Step 1

Todd King (EUA (Eppstein Uhen Architects, Inc.))

Mar 20, 2024 Mar 26, 2024 -

Comments

Joe Mullvain (JDR Engineering Inc.)

Mar 20, 2024 Mar 26, 2024 -

Comments

Michael Jochman (JDR Engineering Inc.)

Mar 20, 2024 Mar 26, 2024 -

Comments https://developer.api.autodesk.com/reports/v2/attachments/urn%3Aadsk.wipprod%3Afs.file%3Avf.Xj4YGpL3TTa69T-C9_7lRQ%3Fversion%3D1?region=US&token=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhIjp7InVybiI6InVybjphZHNrLndpcHByb2Q6ZnMuZmlsZTp2Zi5YajRZR3BMM1RUYTY5VC1DOV83bFJRP3ZlcnNpb249MSJ9LCJpYXQiOjE3MTExNDAwMDEsImV4cCI6MTcxMzczMjAwMX0.eAztcLuE7Kvt_PYcbp4ELgJd9-N1TgL9NywMwKyWL5g https://developer.api.autodesk.com/reports/v2/attachments/urn%3Aadsk.wipprod%3Afs.file%3Avf.Xj4YGpL3TTa69T-C9_7lRQ%3Fversion%3D1?region=US&token=eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkYXRhIjp7InVybiI6InVybjphZHNrLndpcHByb2Q6ZnMuZmlsZTp2Zi5YajRZR3BMM1RUYTY5VC1DOV83bFJRP3ZlcnNpb249MSJ9LCJpYXQiOjE3MTExNDAwMDEsImV4cCI6MTcxMzczMjAwMX0.eAztcLuE7Kvt_PYcbp4ELgJd9-N1TgL9NywMwKyWL5g

Created by Joe Mullvain with Autodesk® Construction Cloud™ on Mar 22, 2024 at 3:40 PM CDT Page 3 of 3

Ball in court Sent Due Returned Response/Action Attachments

Rachel Steffen (EUA (Eppstein Uhen Architects, Inc.))

Mar 20, 2024 Mar 26, 2024 -

Comments

DESIGN-A/E-PROJ MGR Mar 20, 2024 Mar 26, 2024 -

Comments

Review Step 2

COM-ENG-CB/RFI/SUBM

MGR

Comments

SUBMITTAL

TRANSMITTAL

P.O Box 7726 Madison WI 53707 Phone: 608.222.5100

Project: 23-2008-0 State Street Campus Garage

Date Submitted: Response Due:

To: Stevens Construction Corp.

Title:

Type:

Spec:

Requested By:

We are sending:

SUBMITTAL PACKAGE

FOR

STATE STREET CAMPUS GARAGE

ACCESS CONTROL

SPEC SECTION 28 13 00

Prepared by Electrical Contractor:

NEXT Electric, LLC Arden Parfitt, Senior Project Manager

4009 Felland Rd., Suite 106 Madison, WI 53718

Arden.Parfitt@nextelectricllc.com Ph: (608) 371-1158 Fax: (262) 506-3201 www.nextelectricllc.com mailto:Arden.Parfitt@nextelectricllc.com http://www.nextelectricllc.com/ info@ibsystemsinc.com www.ibsystemsinc.com

SUBMITTALS

PREPARED BY:

STATE STREET CAMPUS GARAGE

KEYSCAN ACCESS CONTROL

JAMIE PUCKETT

Project Manager

INTEGRAL BUILDING SYSTEMS

Submittal issued:

February 28, 2024

717 Post Road

Madison, WI 53713

Phone: 608.467.9193

Fax: 608.237.2050

Email: support@ibsystemsinc.com

Integral Building Systems

City of Madison mailto:info@ibsystemsinc.com http://www.ibsystemsinc.com/ mailto:support@ibsystemsinc.com

TABLE OF CONTENTS

Part # Description Cover Page Page 1 Table of Contents Page 2

ACCESS CONTROL

Section # Part # Description Page No 28 13 00 28 13 00 28 13 00: Electronic Access Control Page 3 28 13 00 CA150 Keyscan 1 door reader control Page 4 28 13 00 CA8500 Keyscan 8 door reader control Page 12 28 13 00 EC1500 Keyscan 1 elevator cab control Page 14 28 13 00 EC2500 Keyscan 2 elevator cab control Page 16 28 13 00 AL168175CB Panel Power Supply - 1 Per Panel Page 18 28 13 00 AL600ULACM 6.0 2-4-8 Door Power Supply - 1 Per Panel Page 20 28 13 00 AL600ULX Altronix HID Reader Power Supply Page 22 28 13 00 NETCOM2P Keyscan Plugon Network Communication Board Page 24 28 13 00 IM-1272F1 Battery Back-Up Page 26 28 13 00 40KNKS-00-000000 Signo40K, Wall mount w/Keypad, 13.56mHz Profile, OSDP/Wiegand, Pigtail, Page 28 28 13 00 3513B RCI Cabinet Lock Page 30 28 13 00 3525B RCI Electronic Locking Handle Page 31 28 13 00 ACCESS-COMPOS-DB OSP Rated Access Control Bundle Cable Page 33 28 13 00 VNTC 18-6C SHLD OSP Rated 18/6 Shielded Cable Page 35 28 13 00 VNTC 18-2C OSP Rated 18/2 Unshielded Cable Page 36 28 13 00 W-JH21 1 5/16" J-Hooks Page 37

Page No

RState Street Parking Ramp

City of Madison

28 13 00: Electronic Access Control

Division 28 Submittals

Single Door PoE Equipped Controller Single Door PoE Equipped Controller

CA150

2 Keyscan - CA150

Keyscan Single Door PoE Equipped Controller CA150

Keyscan has always offered access control solutions that optimize system designs and maximize installation flexibility. At the heart of our organization is a vibrant team of engineers and product specialists that continually evaluate new and emerging technologies. Their aim is to select proven technologies that will enhance our product offering without compromising reliability and security.

The innovative CA150 represents the latest addition to our already flexible line up of 2, 4 and 8 reader access control units and elevator floor access control units.

When it comes to performance, capacities and overall capability, the CA150 is comparable with our full range of access control units. From its total number of supported credentials to total number of supported timezones, not a single detail was overlooked.

Exclusive to the CA150 is the fact that it’s equipped to support power-over-ethernet (PoE). That single door at the far end of a building or those customers that have one critical door to be secured have never been so easily accommodated.

Don’t be mistaken, this is no watered down, single door access control unit. Every aspect has been considered to make the CA150 one of the most powerful single door controllers on the market today. We wouldn’t accept anything less and you shouldn’t. We invite you to learn more about this powerful new addition to the Keyscan family of access control units.

Keyscan is pleased to introduce the CA150, a culmination of these efforts.

amy.ahlers Highlight

Dual Processors Dual processors ensure full panel operation even during system downloads.

Flash Memory Equipped with flash memory, the CA150 offers the same impressive characteristics found in the rest of our access control unit (ACU) lineup.

Network Connectivity Equipped with a PoE ready TCP/IP module the CA150 is designed to reduce installation time, lengthy wiring runs and power requirements.

With PoE the CA150 supplies power (680 mA) designed to power reader, door strike, request to exit (PIR) and many other auxiliary devices.

With DHCP supported, the CA150 is a true cutting-edge network appliance with an uncompromising access control feature set.

Two Powered Relays The CA150 comes with two heavy duty powered relays for door strike and auxiliary output control, each providing up to an impressive 500mA at 12VDC.

Four Supervised Inputs The CA150 supports a request to exit (RTE), door contact, and two programmable auxiliary inputs providing you with uncompromising access control capabilities.

Two Reader Ports (In/Out) The CA150 offers two reader inputs. When the application calls for both, in and out reader validations, the CA150 is ready when needed.

System VII Managing the CA150 is provided through Keyscan’s renowned access control management software, with all of its impressive features and capabilities.

The CA150 provides unprecedented system design flexibility. While designed to support a single door it is a fundamental part of our complete lineup of controllers and may be networked along with our family of access control units as a part of a larger system. From the simplest one door system to several hundred doors; from single-sites to multiple-sites; from on-site managed access control to centrally managed access control; or Keyscan Hosted Services, Keyscan offers a true end-to-end access control solution.

Remaining at the heart of every Keyscan system is the strength of Keyscan’s Access Control Management software. The CA150 leverages this very same software platform. By doing so, Keyscan’s single door controller offers many of the same features and capabilities that have been deployed at some of the largest access control installations around the globe. The CA150 is the perfect choice for smaller businesses to implement access control today with the ability to expand their access control systems at a later time.

CA150 Features Include:

CA150 Single Door Controller Benefits

The CA150 is also the perfect solution for Centrally Managed Access Control. With all of the on-site features (network connectivity, power requirements, and door access) all contained in a single part, setting up customer sites couldn’t be easier.

Reverse networking functionality is built into the on-board Ethernet connection and, with the AES Encryption, provides a secure connection from customer sites to the central host.

Whether opening a new site with one door, or adding an additional door to an existing site, the CA150 makes everything easier.

Family of Access Control Units

4 Keyscan - CA150

CA150 Single Door PoE Equipped Controller Design Overview

A) Status LEDs System status, communication and bit counter LEDs allow for diagnostics and troubleshooting.

B) Dual Processors Dual processors ensure uninterrupted panel operation even during system downloads.

C) Flash Memory

D) Tamper Switch If the CA150 cover is removed, for any reason, the tamper switch will activate triggering a Panel Tamper Alarm.

E) Network Connectivity Equipped with a PoE enabled Ethernet port (IEEE 802.3af).

DHCP supported including encrypted and non-encrypted data transmission modes.

F) System Jumpers Readily accessible system jumpers allow for convenient system configuration.

G) Wiring Knockouts Multiple wiring knockouts maximize installation flexibility and cabling concealment.

H) Four Supervised Inputs Inputs allow for request to exit (RTE), door contact input and two auxiliary inputs.

I) Two Reader Ports Provides IN and OUT reader capabilities.

Readers powered in PoE or DC supply mode up to 12VDC @500mA per port.

J) Two Heavy Duty Relays 1 Strike Relay and 1 Auxiliary Relay are provided.

Selectable powered or non-powered modes.

Powered mode provides up to 12VDC @ 500mA per relay; Non-powered provides dry contact rated for 4 amp, 30VDC; 6 amp, 24VDC.

K) Removable Terminal Blocks

L) RS232 Connectivity An RS232 communication link is provided for panel to computer communication.

M) DC Input/Output When PoE is not available a 12VDC input option is provided. Also available is a 12VDC output to supply any local auxiliary device such as a PIR or glass-break sensor rated for 12VDC up to 250mA.

6 Keyscan - CA150

CA150 – Standard LAN/WAN Application The CA150 supports either PoE or direct 12VDC supplies, providing maximum system design flexibility based on what infrastructure is available at any given site. For those sites that may not have PoE capable infrastructure a single or multi-port Midspan PoE injector may be required.

CA150 – Mixed ACU Application The CA150 may be networked along with Keyscan’s family of access control units. The CA150 integrates with Keyscan’s software without security concerns, providing maximum system design and flexibility.

CIM &

NETCOMP

CA4500

CA150 CA150

CA150

CA150

Additional ACU(s)

LAN/WAN

Non-PoE Cat5

Non-PoE Cat5

PoE

Power

Power

Power

Single Mid-Span

PoE Injector

Single Mid-Span PoE Injector

External 12VDC power supply

External 12VDC power supply

Keyscan Access Control

Management Software

LAN/WAN

Keyscan Access Control

Management Software

The CA150 operates as a Class 0 PoE Powered Device (PD). As such, the CA150 requires the allocation of 15.4 Watts from the PoE switch or injector. Of the 15.4 Watts, the CA150 provides 680mA at 12 volts - approximately 8 Watts - to power connected peripheral devices such as readers, door strikes, PIR sensors, etc.

Selection of a PoE switch must be based on the Power demand of all of the loads connected to the switch. The PD Class (0-4) for each device connected to the switch must be known and the sum of all loads, for a conservative and reliable design, should not exceed 75% of the total available Power. As loads are disconnected and others connected, the total Power consumption must be re-assessed. Keyscan recommends the use of low port count PoE switches, maximum 8 ports, to minimize the impact of a switch failure on the Access Control System and, that all PoE switches be powered using a UPS.

For those that require centrally managed access control (CMAC) offering, the CA150 is ready. Equipped with an encrypted PoE capable TCP/IP Ethernet adapter, it is as close to a “plug-and-play” access control offering you will find in the industry.

Managed Access Control (CMAC) Application

When network connectivity is not available, the RS232 communication port provides a convenient way to configure and download events to the CA150 when needed.

CA150 – Simple System Application

PoE considerations:

For CMAC applications, a host server infrastructure is required. This infrastructure provides system database, communications receiver and web-client provisions.

CIM &

NETCOMP

CA4500

CA150

CA150

Keyscan K-WEB

RS232

External 12VDC power supply

Keyscan Access Control

Management Software

901 Burns Street East Whitby, Ontario, L1N 6A6, Canada Toll Free: 1.888.KEYSCAN (Canada/US)

Tel: +1.905.430.7226 Web: www.keyscan.ca

To learn more contact your Keyscan Regional Sales Manager or call: 1 888 KEYSCAN (539.7226)

KEY 2013-08

Information in this folder is intended for general use only. Keyscan Inc., reserves the right to alter designs and specifications without notice or obligation.

© Keyscan Inc. (2013) Printed in Canada

KEYSCAN’S FULL LINE UP OF ACCESS CONTROL UNITS

Keyscan Inc. LR110441-1 complies to:

UL STD 294 Fifth Ed. Access Control System Units

CA8500; CA4500; CA250; EC1500; EC2500

16V ac, 40VA, Class 2 input; relay output contacts, 24V ac, 10A; 30V dc; 5A

CSA STD C22.2 205-M1983 Signal Equipment 187789

PoE Single Door Control System

Multiple Reader Access Control Systems Elevator Floor Control Systems

CA150 CA250 CA4500 CA8500 EC1500 EC2500

Doors/Elevator Floors Supported

1 door 2 doors 4 doors 8 doors 1 cab

(up to 40 floors) 2 cabs

(up to 16 floors)

Reader Ports 2 (In/Out) 2 4 8 1 2

Multi-ACU Compatibility Yes (Ethernet) Yes Yes Yes Yes Yes

System Status LEDs Yes Yes Yes Yes Yes Yes

Dual Processors Yes Yes Yes Yes Yes Yes

Flash Memory Yes Yes Yes Yes Yes Yes

Power Fail Output NA Yes Yes Yes Yes Yes

Floor Monitor Inputs (Supervised)

NA NA NA NA Yes Yes

Request to Exit (RTE) Inputs (Supervised)

1 2 4 8 NA NA

Door Contact Inputs 1 2 4 8 NA NA

Auxiliary Inputs (Supervised)

2 8 16 16 NA NA

I/O Input Expansion NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Auxiliary Output Relays 1 2 4 8 NA NA

Expansion Auxiliary Output Relays

NA NA 8 8 NA NA

I/O Outputs NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Door Output Relays 1 2 4 8 NA NA

No. of Cardholders 32,000 32,000 32,000 32,000 32,000 32,000

Transaction File Buffer 6000 6000 6000 6000 6000 6000

Time Zones 256 256 256 256 256 256

Time Schedules 512 512 512 512 512 512

Group Levels 511 511 511 511 511 511

Holiday Dates 64 64 64 64 64 64

Ethernet Ready Equipped Optional Optional Optional Optional Optional

PoE - Power over Ethernet (IEEE 802.3af)

Equipped NA NA NA NA NA

CMAC Reverse IP Equipped Optional Optional Optional Optional Optional

Serial Communication Yes (single panel) Yes Yes Yes Yes Yes

A cc es s

Co nt ro l U ni t

In pu ts O ut pu ts Ca pa ci ty Co nn ec ti vi ty

Keyscan CA8500 - 8 Reader Access Control Panel

CA8500

8 Reader Access Control Panel

Door 1

OR OR

OR OR

1 Pair 22GA 1 Pair

18GA 2 Pair

22GA

2x 16.5 VAC, 37 or 40VA Transformer (not supplied)

16 Aux Alarm Inputs (N/C, single or dual resistor supervision)

8 Aux output relays

IOCB1616

16 input/16 output

8 Pre-alert output relays

8 Accessibility output relays

12 VDC / 7AH back up battery (not supplied)

Mix and match the CA8500 with any of Keyscan’s family of access control units

Ribbon Cable NETCOM2P/6P

OR

NETCOM2P/6P

& CIM

OR

Reverse Network Connection Option

REMOTE SITE(S)MULTIPLE PANELS

LAN/WAN

OR OR

OR OR

OR OR

Door 5

OR OR

Door 6

OR OR

Door 7

OR OR

Door 8

Door 2

Door 3

Door 4

5 Contuctor shielded 22GA Max distance 100 ft

Direct connect RS232

6 Conductor shielded 18 or 22 GA. Max Distance 500 ftDoor

Contact Strike or Maglock RTE

Keyscan or compatible readers

2 Twisted Pairs (CAT5) Distance: 1st to last CIM, maximum CAN Bus 1 distance 3280 ft (1000m) @ 9600 bps

A CIM is required per controller when there is more than one controller on the communication bus.

CA8500.qxp_Layout 1 11/15/2013 9:45 AM Page 1

CA8500

8 Reader Access Control Panel

KEY 2013-11

Information on this sheet is intended for general use only. Keyscan Inc reserves the right to alter designs and specifications without notice or obligation. © Keyscan, Inc (2013) Printed in Canada

901 Burns Street East Whitby, Ontario, L1N 6A6, Canada Toll Free: 1.888.KEYSCAN (Canada/US)

Tel: +1.905.430.7226 Web: www.keyscan.ca

PoE Single Door Control System

Multiple Reader Access Control Systems Elevator Floor Control Systems

CA150 CA250 CA4500 CA8500 EC1500 EC2500

Doors/Elevator Floors Supported

1 door 2 doors 4 doors 8 doors 1 cab

(up to 40 floors) 2 cabs

(up to 16 floors)

Reader Ports 2 (In/Out) 2 4 8 1 2

Multi-ACU Compatibility Yes (Ethernet) Yes Yes Yes Yes Yes

System Status LEDs Yes Yes Yes Yes Yes Yes

Dual Processors Yes Yes Yes Yes Yes Yes

Flash Memory Yes Yes Yes Yes Yes Yes

Power Fail Output NA Yes Yes Yes Yes Yes

Floor Monitor Inputs (Supervised)

NA NA NA NA Yes Yes

Request to Exit (RTE) Inputs (Supervised)

1 2 4 8 NA NA

Door Contact Inputs 1 2 4 8 NA NA

Auxiliary Inputs (Supervised)

2 8 16 16 NA NA

I/O Input Expansion NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Auxiliary Output Relays 1 2 4 8 NA NA

Expansion Auxiliary Output Relays

NA NA 8 8 NA NA

I/O Outputs NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Door Output Relays 1 2 4 8 NA NA

No. of Cardholders 32,000 32,000 32,000 32,000 32,000 32,000

Transaction File Buffer 6000 6000 6000 6000 6000 6000

Time Zones 256 256 256 256 256 256

Time Schedules 512 512 512 512 512 512

Group Levels 511 511 511 511 511 511

Holiday Dates 64 64 64 64 64 64

Ethernet Ready Equipped Optional Optional Optional Optional Optional

PoE - Power over Ethernet (IEEE 802.3af)

Equipped NA NA NA NA NA

CMAC Reverse IP Equipped Optional Optional Optional Optional Optional

Serial Communication Yes (single panel) Yes Yes Yes Yes Yes

A cc es s

Co nt ro l U ni t

In pu ts O ut pu ts Ca pa ci ty Co nn ec ti vi ty

CA8500.qxp_Layout 1 11/15/2013 9:45 AM Page 2 w w w . k e y s c a n . c a

MULTIPLE

PANELS

6 CONDUCTOR SHIELDED 22GA

MAX. DISTANCE 500’

OPTIONAL EQUIPMENT

ADD OCB8 IN BANKS OF 8 TO

CONTROL UP TO 40 FLOORS

ADD UP TO

4 OCB8’S

RIBBON CABLE

2 X 16.5 VAC, 37 OR 40VA TRANSFORMER (NOT SUPPLIED)

12V DC/7AH BACK UP

BATTERY (NOT SUPPLIED)

16 x 2 N/O FLOOR INPUTS

A CB485 IS REQUIRED PER

CONTROLLER WHEN THERE

IS MORE THAN ONE ON SITE CB485

1 OCB8 BOARD

(STANDARD)

5 CONDUCTOR SHIELDED 22GA

MAX. DISTANCE 100’

DIRECT CONNECT RS232

DATA CABLE (40-2322)

SPDT DRY CONTACTS

STATIC PROTECTED

WSSKP1

or

2 TWISTED PAIRS (CAT5) MAX.

DISTANCE 2000’

TO REMOTE SITES

TELEPHONE LINE

OR LAN/WAN

REMOTE SITE

or

NETCOM2P/6P

CB485

MODEM

(MC33H)

MC9600

MODEM

KPROX2

LAN/WAN

* Combine with Keyscans family of controllers

EC1500

1 Reader Elevator Control Panel

Keyscan Inc. reserves the right to alter designs and specifications without notice or obligation overview of the features in every Keyscan system

PoE Single Door Control System

Keyscan Multiple Reader Control Systems Keyscan Elevator Control Systems

CA150 CA250 CA4500 CA8500 EC1500 EC2500

A c c e ss

C o n tr o l U n it

Doors Supported 1 door 2 doors 4 doors 8 doors 1 cab up to 40 floors 2 cabs / up to 16 floors

Reader Ports 2 (In/Out) 2 4 8 1 2

Multi -ACU Support Unlimited Unlimited Unlimited Unlimited Unlimited Unlimited

System Status LEDs Yes Yes Yes Yes Yes Yes

Dual Processors Yes Yes Yes Yes Yes Yes

Flash Memory Yes Yes Yes Yes Yes Yes

Power Fail Output NA Yes Yes Yes NA NA

Floor Monitor Inputs (Supervised)

NA NA NA NA Yes Yes

In p u ts

Request to Exit (RTE) Inputs (Supervised)

1 2 4 8 NA NA

Door Contact Inputs 1 2 4 8 NA NA

Auxiliary Inputs (Supervised)

2 8 16 16 NA NA

I/O Input Expansion NA NA 64 (banks of 16) 64 (banks of 16) NA NA

O u tp u ts

Auxilliary Output Relays

1 2 4 8 NA NA

Expansion Auxiliary Output Relays

NA NA 8 8 NA NA

I/O Outputs NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Door Output Relays 1 2 4 8 NA NA

C a p a c it y

No. of Cardholders 32,000 32,000 32,000 32,000 32,000 32,000

Transaction File Buffer

6000 6000 6000 6000 6000 6000

Time Zones 256 256 256 256 256 256

Time Schedules 512 512 512 512 512 512

Group Levels 511 511 511 511 511 511

Holiday Dates 64 64 64 64 64 64

C o n n e c ti vi ty

Ethernet Ready Equipped Optional Optional Optional Optional Optional

POE - Power over Ethernet (IEEE 802.3af)

Equipped NA NA NA NA NA

CMAC Reverse IP Equipped Optional Optional Optional Optional Optional

Serial Communication

Yes (single panel) Yes Yes Yes Yes Yes

Dial Up Communication (Optional)

NA Yes Yes Yes Yes Yes

Keyscan’s family of Access Control Units are inter-dependable and scalable to support any sized application.

Keyscan Inc.

901 Burns Street East, Whitby, ON Canada L1N 6A6 Phone: +1 905.430.7226 Fax: +1 905.430.7275 Toll Free: +1 888-KEYSCAN (539.7226) Web Site: www.keyscan.ca

KEY 2011-09

w w w . k e y s c a n . c a

MULTIPLE

PANELS

MODEM

(MC33H)

TO REMOTE SITES

TELEPHONE LINE

OR LAN/WAN

REMOTE SITE

or

NETCOM2P/6P

CB485

6 CONDUCTOR SHIELDED 22GA

MAX. DISTANCE 500’

2 X 16.5 VAC, 37 OR 40VA TRANSFORMER (NOT SUPPLIED)

12V DC/7AH BACK UP

BATTERY (NOT SUPPLIED)

RIBBON CABLE

OPTIONAL EQUIPMENT

ADD OCB8 IN BANKS OF 8

TO CONTROL UP TO 16

FLOORS PER ELEVATOR CAB

CAB

EL-1

CAB

EL-2

1 OCB8 BOARD

(INCLUDED

FOR CAB 1)

CAB

EL-1

1 0CB8 BOARD

(INCLUDED

FOR CAB 2)

CAB

EL-2

SPDT DRY CONTACTS

STATIC PROTECTED16 x 2 N/O FLOOR INPUTS

A CB485 IS REQUIRED

PER CONTROLLER

WHEN THERE IS MORE

THAN ONE ON SITE

CB485

5 CONDUCTOR SHIELDED 22GA

MAX. DISTANCE 100’

DIRECT CONNECT RS232

DATA CABLE (40-2322)

2 TWISTED PAIRS (CAT5) MAX.

DISTANCE 2000’

or

WSSKP1

or

MC9600

MODEM

KPROX2

LAN/WAN

* Combine with Keyscans family of controllers

EC2500

2 Reader Elevator Control Panel

Keyscan Inc. reserves the right to alter designs and specifications without notice or obligation overview of the features in every Keyscan system

PoE Single Door Control System

Keyscan Multiple Reader Control Systems Keyscan Elevator Control Systems

CA150 CA250 CA4500 CA8500 EC1500 EC2500

A c c e ss

C o n tr o l U n it

Doors Supported 1 door 2 doors 4 doors 8 doors 1 cab up to 40 floors 2 cabs / up to 16 floors

Reader Ports 2 (In/Out) 2 4 8 1 2

Multi -ACU Support Unlimited Unlimited Unlimited Unlimited Unlimited Unlimited

System Status LEDs Yes Yes Yes Yes Yes Yes

Dual Processors Yes Yes Yes Yes Yes Yes

Flash Memory Yes Yes Yes Yes Yes Yes

Power Fail Output NA Yes Yes Yes NA NA

Floor Monitor Inputs (Supervised)

NA NA NA NA Yes Yes

In p u ts

Request to Exit (RTE) Inputs (Supervised)

1 2 4 8 NA NA

Door Contact Inputs 1 2 4 8 NA NA

Auxiliary Inputs (Supervised)

2 8 16 16 NA NA

I/O Input Expansion NA NA 64 (banks of 16) 64 (banks of 16) NA NA

O u tp u ts

Auxilliary Output Relays

1 2 4 8 NA NA

Expansion Auxiliary Output Relays

NA NA 8 8 NA NA

I/O Outputs NA NA 64 (banks of 16) 64 (banks of 16) NA NA

Door Output Relays 1 2 4 8 NA NA

C a p a c it y

No. of Cardholders 32,000 32,000 32,000 32,000 32,000 32,000

Transaction File Buffer

6000 6000 6000 6000 6000 6000

Time Zones 256 256 256 256 256 256

Time Schedules 512 512 512 512 512 512

Group Levels 511 511 511 511 511 511

Holiday Dates 64 64 64 64 64 64

C o n n e c ti vi ty

Ethernet Ready Equipped Optional Optional Optional Optional Optional

POE - Power over Ethernet (IEEE 802.3af)

Equipped NA NA NA NA NA

CMAC Reverse IP Equipped Optional Optional Optional Optional Optional

Serial Communication

Yes (single panel) Yes Yes Yes Yes Yes

Dial Up Communication (Optional)

NA Yes Yes Yes Yes Yes

Keyscan’s family of Access Control Units are inter-dependable and scalable to support any sized application.

Keyscan Inc.

901 Burns Street East, Whitby, ON Canada L1N 6A6 Phone: +1 905.430.7226 Fax: +1 905.430.7275 Toll Free: +1 888-KEYSCAN (539.7226) Web Site: www.keyscan.ca

KEY 2011-09

Description Altronix AL168CB Series Multi-Output Power Supplies provide 16VAC or 18VAC distributed via eight (8) auto-resettable PTC protected outputs for powering multiple security system or access control panels.

- Eight (8) PTC protected outputs.

- AC power LED indicator.

- Surge suppression.

- Unit maintains camera synchronization.

- Spare fuses included.

- CE European Conformity.

- Lifetime Warranty / Made in the U.S.A.

AL168CB Series Power Supplies

AL168CB Series Power Supply Configuration Reference Chart

Rev. AL168CB-03222017

Key Features

AL168300CB

Altronix Model Number Output Voltage

Total Output Current (A)

Number of PTC Protected

Outputs

Output Current (max per output)

Main Fuse on Board Ratings

115VAC

50/60Hz Input

Current

AL168CB

16VAC 6A

2.5A

10A/250V 0.9A

18VAC 5.5A

AL168175CB 16VAC 10A 15A/250V 1.45A

AL168300CB

16VAC 18A

15A/32V 2.7A

18VAC 16A

AL168300CBM

16VAC 18A

18VAC 16A

AL168600CB

16VAC 40A

6A Two (2) 15A/32V 5.4A

18VAC 36A

AL168CB Series Power Supplies

Input

Outputs

Indicators (LED) AC Outputs Powered.

Agency Listings CE European Conformity

Physical and Environmental Dimensions (H x W x D)

AL168CB:

8.5” x 7.5” x 3.5” (215.9mm x 190.5mm x 88.9mm).

AL168175CB and AL168300CBM:

8.5” x 7.5” x 3.875” (215.9mm x 191mm x 98.4mm).

AL168300CB and AL168600CB:

13.5” x 13” x 3.25” (342.9mm x 330.2mm x 82.6mm).

Physical and Environmental (cont’d) Product Weight / Shipping (approx.)

Model Product Weight Shipping Weight AL168CB 6.0 lbs. (2.7 kg) 7.0 lbs. (3.18 kg) AL168175CB 8.15 lbs. (3.7 kg) 9.15 lbs. (4.17 kg) AL168300CBM 12.45 lbs. (5.65 kg) 13.5 lbs. (6.12 kg) AL168300CB 16.9 lbs. (7.67 kg) 18.1 lbs. (8.21 kg) AL168600CB 24.9 lbs. (11.29 kg) 26.1 lbs. (11.84 kg)

Model 16VAC 18VAC

AL168CB 49 51

AL168175CB 82 N/A

AL168300CBM 147 147

AL168300CB 147 147

AL168600CB 328 332

Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com

Specifications

AL600ULACM

• Eight (8) independently controlled fuse protected outputs.

AL600ULACMCB

• Eight (8) independently controlled

PTC protected outputs.

• Class 2 Rated power limited outputs.

• The AL600ULACM / AL600ULACMCB converts an 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. These power outputs can be converted to dry form "C" contacts (AL600ULACM only). Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. These units will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. The units are designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power.

The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.

• 12VDC or 24VDC @ 6 amp supply current.

• Power supply input options:

a) One (1) common power input for ACM8/ ACM8CB and lock power (factory installed).

b) Two (2) isolated power inputs - One (1) to power the ACM8/ACM8CB and one (1) for lock accessory power, (external power supply is required). (Current is determined by the power supply connected, not to exceed a maximum of 10 amp total).

• Eight (8) Access Control System trigger inputs.

Input options:

a) Eight (8) normally open (NO) inputs.

b) Eight (8) open collector inputs.

c) Any combination of the above.

• Eight (8) independently controlled outputs.

Output options:

a) Eight (8) Fail-Safe and/or Fail-Secure power outputs.

b) Eight (8) form “C” 5 amp rated relay outputs

(AL600ULACM only).

c) Any combination of the above

(AL600ULACM only).

• Eight (8) auxiliary power outputs (unswitched)

• Output ratings:

- Fuses are rated @ 3.5 amp (AL600ULACM).

- PTCs are rated @ 2.5 amp (AL600ULACMCB).

• ACM8 board main fuse is rated at 10 amp.

• Input 115VAC 60Hz rated @ 1.9 amp.

• Filtered and electronically regulated outputs

(built-in power supply).

• Red LEDs indicate outputs are triggered (relays energized).

• Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs.

Fire Alarm disconnect input options:

a) Normally open (NO) or normally closed (NC) dry contact input.

b) Polarity reversal input from FACP signaling circuit.

• Alarm output relay indicates that FACP input is triggered (form “C” contact rated @ 1 amp 28VDC not evaluated by UL).

• Green LED indicates when FACP disconnect is triggered.

• Built-in charger for sealed lead acid or gel type batteries.

• AL600ULXB (Power Supply Board) maximum charge current .7 amp.

• Automatic switch over to stand-by battery when AC fails.

• AC input and DC output LED indicators.

• Zero voltage drop when unit switches over to battery backup (AC failure condition).

• Short circuit and thermal overload protection.

• AC fail supervision (form "C" contact).

• Battery fail and battery presence supervision

(form "C" contact).

• Enclosure accommodates up to two (2)

12AH batteries.

AL600ULACM, AL600ULACMCB

Power Supply/Chargers w/Multi-Output Access Power Controllers Rev. DSAL600ULACM - A06F

Overview

Specifications

UL Listed for Access Control Systems Units

(UL 294).

CUL Listed - CSA Standard C22.2 No.205-M1983 Signal Equipment.

Agency Approvals

MEA - NYC Department of Buildings Approved.

CSFM - California State Fire Marshal Approved.

Enclosure Dimensions 15.5”H x 12”W x 4.5”D

.875"

1"

1.3"9.97"

13.53"

6.625"

2.25" 3.68" 4.56"

1.22"

1.22"

3.5"

1"

13.25"

2"

1.22"

12"

15.5"

4.5"

2.25" 3.68" 4.56"

1.22"

1.25"

2.2"

1"

Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com

- Available with 1, 4, 8 or 16 outputs

- Fused or PTC ptotected outputs

- Built-in charger for sealed lead acid or gel type batteries

- Instantaneous transfer to stand-by batteries

- Short circuit and overload protection

- AC input and DC output options

- UL Listed in the U.S. and Canada

- CSFM and MEA Approved

- Lifetime Warranty

- All units are available in grey or red enclosure

AL600ULX Series Power Supply Configuration Reference Chart

Key Features

Altronix Model Number

Input Rating:

115VAC,

60Hz

Input Fuse

Rating

Total Output Rating

(A)

Power Distribution

Module

Class 2 Rated Power-Limited

Outputs (auto-resettable)

Number of

Outputs

Fused Output Ratings

PTC

Output Ratings

Accommodates Batteries

AL600ULX

3.5A 5A/ 250V 6A

N/A – 1 6A – Two (2) 7AH

AL600ULXX Two (2) 12AH

AL600ULPD4

PD4UL – 4 3.5A –

Two (2) 7AH

AL600ULXPD4 Two (2) 12AH

AL600ULPD4CB

PD4ULCB P 4 – 2.5A

Two (2) 7AH

AL600ULXPD4CB Two (2) 12AH

AL600ULPD8

PD8UL – 8 3.5A –

Two (2) 7AH

AL600ULXPD8 Two (2) 12AH

AL600ULPD8CB

PD8ULCB P 8 – 2.5A

Two (2) 7AH

AL600ULXPD8CB Two (2) 12AH

AL600ULXPD16 Two (2) PD8UL – 16 3.5A – Two (2) 12AH

AL600ULXPD16CB Two (2) PD8ULCB P 16 – 2.5A Two (2) 12AH

AL600ULPD8

AL600ULX Series Power Supply/Chargers

Altronix AL600ULX series power supply/chargers convert a 115VAC, 60Hz input into a single fused, four (4), eight (8) or sixteen (16) fuse or PTC protected outputs. Outputs are selectable for 12VDC or 24VDC with a total of 6A max.

Lifetime Warranty Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com

Rev. 07262022

Input

Outputs

Back-up Battery (not included)

Supervision

Indicators (LED)

Agency Listings

Physical and Environmental

Model Product Weight Shipping Weight AL600ULX 7.05 lb. (3.2 kg) 8.9 lb. (4.1 kg) AL600ULXX 8.65 lb. (3.92 kg) 10.95 lb. (4.97 kg) AL600ULPD4(CB) 7.2 lb. (3.27 kg) 9.05 lb. (4.1 kg) AL600ULXPD4(CB) 8.7 lb. (3.95 kg) 11.05 lb. (5.01 kg) AL600ULPD8(CB) 7.3 lb. (3.31 kg) 9.15 lb. (4.15 kg) AL600ULXPD8(CB) 8.8 lb. (4.0 kg) 11.15 lb. (5.06 kg) AL600ULXPD16(CB) 8.95 lb. (4.06 kg) 11.25 lb. (5.1 kg)

Specifications

Lifetime Warranty Altronix Corporation | 140 58th St | Brooklyn, NY 11220 USA phone: +1 718.567.8181 | fax: +1 718.567.9056 | email: info@altronix.com | www.altronix.com

AL600ULX Series Power Supply/Chargers

Keyscan - NETCOM2P / NETCOM6P

NETCOM2P / NETCOM6P

Plug on TCP/IP Communication Modules

Keyscan’s NETCOM2P or NETCOM6P TCP/IP Communication modules are designed to work seamlessly with Keyscan’s CIM (Communication Interlink Module). They are both modular TCP/IP converters that plug directly into the Keyscan’s CIM communication module to establish network communication to the server or among multiple ACUs along a CAN Bus Network.

The CIM module with the network connection is referred to as CIM 0 and must have a jumper on J4. Keyscan recommends that you limit your communication loop and communication software not to exceed 100 readers or 12 panels.

The NETCOM2P and NETCOM6P must be programmed with the Keyscan NETCOM Program Tool Utility in order to function. Refer to the NETCOM2P/CIM or NETCOM6P/CIM programming guides for full instructions

Keyscan’s NETCOM2P and NETCOM6P (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate over a network.

Both NETCOM2P and NETCOM6P (encrypted) communication modules connect directly to the ACU or, for legacy systems, the CB-485 communication module allowing you to establish communication along an existing LAN/WAN network.

Keyscan’s NET6P-KHS (encrypted) TCP/IP communication modules are the fastest and easiest way to enable Keyscan Access Control Units (ACUs) to be connected and communicate via Keyscan Hosted Services.

The NET6P-KHS (encrypted) communication module is DHCP set up and pre-configured to automatically connect to Keyscan servers allowing you to establish communication along an existing LAN/WAN network.

NETCOM2P and NETCOM6P (Encrypted) Plug on TCP/IP Communication Modules

Using NETCOM2P and NETCOM6P (Encrypted) on CIM based installations:

NET6P-KHS (Encrypted) for Keyscan Hosted Services:

Keyscan CIM shown with NETCOM2P

NETCOM2P / NETCOM6P

Plug on TCP/IP Communication Modules

KEY 2013-01

Information on this sheet is intended for general use only. Keyscan Inc reserves the right to alter designs and specifications without notice or obligation. © Keyscan Inc., (2013) Printed in Canada

901 Burns Street East Whitby, Ontario, L1N 6A6, Canada Toll Free: 1.888.KEYSCAN (Canada/US)

Tel: +1.905.430.7226 Web: www.keyscan.ca

Input Power through ACU 140 mA, + ACU 130 mA = 270 mA•

Input Power through CIM 140 mA + CIM 150 mA = 290 mA•

Network Interface RJ45 10/100 Ethernet•

Dimensions 1.625” x 1.9375” (41mm x 49mm)•

NETCOM6P

With AES Rijndael encryption•

Agency Approvals - Ethernet Socket

Complies with Class B limits of EN 55022 : 1998 • Direct & Indirect ESD Complies with EN 55024 : 1998

Environmental Tolerances Suitable for commercial and industrial • applications

NET6P-KHS (Keyscan Hosted Services only) DHCP IP set up; AES Rijndael encryption; Pre- • configured to connect with Keyscan Servers

Operating Temperature 5° to 70°C (41° to 158°F)•

Specifications:

Application using CIM Infrastructure

CAN Bus 1

CAT5 - 2

TWISTED PAIRS

CAN Bus 2

CIM n

ACU 2 ACU n

CIM 1

ACU 1

ACUs communicate via Keyscan’s new CIM infrastructure.

These ACUs are interlinked with CAN Bus 1 establishing a link with the Keyscan communication server via TCP/IP communication options.

These ACUs are also interlinked with CAN Bus 2 delivering ACU to ACU global communication between all shown ACUs.

For network TCP/IP add NETCOM2P /

NETCOM6P (encrypted)

CIM 0

7.0Ah

4.34 Ibs (1.97 Kg)

105A (5s)

Approx 33mΩ

Initial Charging Current less than 1A.2. Voltage 0 0 0 13.5V~13.8V at 77 F(25 C)Temp. Coefficient -10mV/ F

Specifications

Rated Voltage

(C ,1.75V/cell,20hrs)20

Temperature Effect on Capacity

C.O.V - Cutoff Voltage/cell. The battery is fully charged & being discharged to COV

C.O.V - Cutoff Voltage/cell. The battery is fully charged & being discharged to COV

ABS

Standby/Float Use

IM series batteries may be stored for up to 6 months 0 0 at 77 F(25 C) and then a freshening charge is required.

For higher temperatures - time interval will be shorter.

12V

103%

100%

86%

0 077±5 F (25±3 C)

5.95 inches ( 151 mm)

2.56 inches ( 65 mm)

3.68 inches (93.5 mm)

3.92 inches (99.5 mm)

F1

Layout

104 F (40 C)0 0

77 F (25 C)0 0

32 F ( 0 C)0 0

(25 )0C

(25 )0C

0 0Constant Current Discharge (Amperes) at 77 F(25 C)

0 0Constant Power Discharge (Watts/cell) at 77 F(25 C)

0 05～122 F (-15～50 C) 0 0-4～104 F (-20～40 C) 0 05～104 F (-15～40 C)

Discharge Charge Storage

Product Data Sheet

IM Series: IM-1272F1 (UT-1272F1) 12 Volt, 7.0 Amp. Hour

Dimensions

F.V/Time 5min 10min 15min 20min 30min 45min 1h 1.5h 2h 3h 4h 5h 6h 8h 10h 20h

1.85V/cell 17.0 12.5 9.90 8.10 6.12 4.64 3.91 2.90 2.38 1.72 1.36 1.16 0.99 0.780 0.637 0.343

1.80V/cell 18.5 13.2 10.3 8.35 6.28 4.73 3.99 2.95 2.41 1.74 1.38 1.18 1.01 0.790 0.644 0.347

1.75V/cell 19.9 13.8 10.7 8.60 6.43 4.83 4.06 3.00 2.45 1.77 1.40 1.19 1.02 0.800 0.653 0.350

1.70V/cell 21.4 14.4 11.1 8.86 6.57 4.92 4.13 3.05 2.49 1.79 1.42 1.21 1.03 0.809 0.660 0.354

1.67V/cell 22.3 14.8 11.3 9.01 6.67 4.98 4.17 3.08 2.51 1.81 1.43 1.22 1.04 0.816 0.665 0.356

1.60V/cell 24.3 15.7 11.8 9.40 6.87 5.11 4.27 3.14 2.56 1.84 1.46 1.24 1.06 0.829 0.675 0.361

F.V/Time 5min 10min 15min 20min 30min 45min 1h 1.5h 2h 3h 4h 5h 6h 8h 10h 20h

1.85V/cell 32.3 23.9 19.1 15.6 11.8 9.01 7.61 5.67 4.65 3.37 2.69 2.29 1.96 1.55 1.27 0.686

1.80V/cell 34.8 25.0 19.7 16.0 12.1 9.15 7.73 5.74 4.71 3.42 2.72 2.32 1.99 1.57 1.28 0.693

1.75V/cell 37.4 26.1 20.3 16.4 12.3 9.30 7.84 5.82 4.77 3.46 2.76 2.35 2.01 1.58 1.29 0.700

1.70V/cell 39.9 27.2 20.9 16.8 12.5 9.40 7.95 5.90 4.84 3.50 2.79 2.37 2.03 1.60 1.31 0.707

1.67V/cell 41.4 27.8 21.3 17.1 12.7 9.50 8.02 5.95 4.87 3.53 2.81 2.39 2.05 1.61 1.32 0.712

1.60V/cell 44.7 29.2 22.1 17.6 13.0 9.70 8.17 6.05 4.95 3.59 2.85 2.43 2.08 1.64 1.34 0.722

(20hr,0.350A,1.75V/cell)

(10hr,0.653A,1.75V/cell)

(5hr,1.19A,1.75V/cell)

(3hr,1.77A,1.75V/cell)

(1hr,4.27A,1.60V/cell)

7.00 Ah

6.53 Ah

5.85 Ah

5.30 Ah

4.27 Ah

5.94±0.08

.5

±0

.0

.6

±0

.0

.9

±0

.0

.6

0.03

70.19

0.06

F1

Standby Float Charging Characteristics/

Temperature Effectes on Battery Capacity

Applications

Temperature Effectes on Long Term Float Life

Battery TemperatureBattery Temperature

Standards General Features

Discharge Characteristics

Sales Offices

Sales: 1.800.233.6261

Website: www.adiglobaldistribution.us www.adiglobaldistribution.ca

Publication No.: LB- -PD-ADI-V1.1-202106IM-1272F1

Curves represent Constant Current draw ( Amp.)

1C curve = 1 x Nominal capacity= 7amp. constant draw 0.05C curve = 0.05 x Nominal capacity = 0.35amp. draw

• Uninterruptable Power Supply (UPS)

• Emergency backup power supply

• All purpose

• Auto control system

• Communication power supply

• Alarm and security system

• DC power supply

• Electric Power System (EPS) • UL, CE Certified

• Compliance with IEC 60896 standards, EU Battery Directive

• High quality AGM separator: extend cycle life and prevent micro short circuit

Special exhaust structure and sealing technology, safe and reliable, flexible installation, convenient maintenance

High purity PbCaSn raw material alloy is used for plate grids, assuring less gassing & low self-discharge rate

• 05 years design life(77 F)

• Manufactured in IATF16949,ISO45001, ISO 9001 and ISO 14001 certified production facilities

0.05C0.1C 0.2C

0.4C

0.6C1C

2C3C

101 2 4 6 20 40 60 2 4 6 8 10

HMin

8 20

（V）

12V Battery

T e rm in a l V o lt a g e (V

Discharge Time

0 0 Temperature:77 F(25 C)

0 8 16 2012 24 28 32 36 40

(V)(XCA)%

Charge Volume

Charging Current

Charging Voltage

After 100% Discharge

Charge Voltage

(Constant 2.25v/cell)

Charging Current

0.10

0.15

0.20

0.25

0.05

Charging Time(hours)

After 50% Discharge

Charged Volume

0 00.10CA-2.25V/cell Temperature77 F(25 C)

0.25CA

0.17CA

0.1CA

C a p a c it y

-20 -10 0 10 20 30 40 50 60 oC oF-4 32 50 6814 12210486 140

F lo a t� lif e (y e a r)

20 25 30 35 40 45 50 oC oF1221048677 95 11368

VdS

Product Data Sheet

IM Series: IM-1272F1 (UT-1272F1) 12 Volt, 7.0 Amp. Hour

PHYSICAL ACCESS SOLUTIONS

HID Signo™ is the signature line of physical access control readers from HID Global. The versatility, performance and connected capabilities of HID Signo readers set a new industry benchmark for the most highly adaptable, interoperable and secure approach to electronic access control.

Offering an unparalleled breadth of functionality, HID Signo affords security system installers and administrators a simple and effective approach to secure access control for almost any scenario.

With support for the widest array of credential technologies — past, present and future — HID Signo is the perfect choice for those looking to make the transition to a secure authentication technology.

HID Signo readers transcend the traditional approach to security by being designed to be connected and managed remotely without needing to physically touch each device. This functionality empowers access control systems to dynamically respond as new needs, configurations or threats arise.

hidglobal.com

THE SIGNATURE LINE OF READERS FROM HID GLOBAL

� Highly Versatile — Support for the widest range of credential technologies, including HID Mobile Access® via native Bluetooth and Near Field Communication (NFC).

� Unparalleled Performance — Ultra secure storage of cryptographic keys on certified secure element hardware, plus a new surface detection feature that enables the reader to automatically recalibrate and optimize read range performance.

� Connected to the Future — All readers include out-of-the-box support for Open Supervised Device Protocol (OSDP) for secure bidirectional communication.

HID® Signo™ Readers Models: 20, 40, 20K, 40K

READY FOR THE FUTURE NOW

� Mobile-ready by default, including Apple's Enhanced Contactless Polling (ECP) to support credentials in Apple Wallet

� Sleek, innovative design to suit modern architecture

� Integrated OSDP for secure authentication and configuration post installation

� Built on a hardware platform designed to be adaptable to support future technology

� Designed to seamlessly integrate into the HID Origo® ecosystem

POWERFULLY SECURE

� Multi-Layered security to ensure data authenticity and privacy

� EAL5+ Certified Secure Element Hardware

� Native OSDP secure channel capability

� Trusted secure authentication using the SIO data model

� Supports iCLASS Elite™ and Corporate

1000 Programs

MEET EVERY NEED, ADAPT TO ANY SITUATION

� Go mobile with native Bluetooth and NFC support

� Integrated 125 kHz credential read support for easy migration

� Supports over 15 common credential technologies

� Flush mount terminal block and pigtail wiring options

� Robust outdoor performance with an IP65 rating

MANAGE, UPGRADE AND CONFIGURE

� Easily and securely managed using HID Reader Manager®

� Configure via a mobile device or OSDP

� Update firmware in response to threats

� Personalize by configuring audio visual or keypad settings

� Deactivate legacy credential technology to conclude secure migration

20 20K 40 40K http://www.hidglobal.com

SPECIFICATIONS

An ASSA ABLOY Group brand

© 2020 HID Global Corporation/ASSA ABLOY AB. All rights reserved. HID, HID Global, the HID Blue Brick logo, the Chain Design, HID Signo, iCLASS Elite, HID Reader Manger, Seos, iCLASS SE, iCLASS SR, iCLASS, HID Proximity, and Indala are trademarks or registered trademarks of HID Global or its licensor(s)/supplier(s) in the US and other countries and may not be used without permission. All other trademarks, service marks, and product or service names are trademarks or registered trademarks of their respective owners.

2020-09-21-pacs-signo-reader-family-ds-en PLT-04831

North America: +1 512 776 9000 Toll Free: 1 800 237 7769 Europe, Middle East, Africa: +44 1440 714 850 Asia Pacific: +852 3160 9800 Latin America: +52 55 9171 1108 hidglobal.com

HID Signo Reader Model 20 20K 40 40K

2.4 GHz (Bluetooth)

Credential Compatibility

Mobile Credentials powered by Seos® (HID Mobile Access)

13.56 MHz (NFC)

Credential Compatibility

Seos, iCLASS SE®, iCLASS SR®, iCLASS®, MIFARE Classic, MIFARE DESFire EV1/EV2, FeliCa™ & Contactless e-Purse Application Specification (CEPAS), Mobile Credentials powered by Seos (HID Mobile Access)

125 kHz Credential Compatibility HID Proximity®, Indala® Proximity, AWID Proximity, and EM Proximity

Typical Read Range1

Seos®, MIFARE Classic, MIFARE DESFire EV1/EV2 & ISO14443A Single Technology Cards –

1.6 to 4 in (4 to 10 cm)

HID / AWID Proximity®, Indala Proximity®, EM Proximity & 125 kHz Single Technology Cards –

2.4 to 4 in (6 to 10 cm)

Mounting Suited for mullion-mount door installations or any flat surface mounting

Suited to mount and cover single gang switch boxes with a slotted mounting plate for alternate back-box spacing

Color Black bezel with silver trim baseplate 2

Keypad No Yes (2 x 6 layout) No Yes (3 x 4 layout)

Dimensions (width x length x depth)

1.77 in x 4.78 in x

0.77 in

(45 mm x 121.5 mm x 19.5 mm)

1.78 in x 4.79 in x

0.85 in

(45 mm x 121.5 mm x 21.5 mm)

3.15 in x 4.78 in x

0.77 in

(80 mm x 121.5 mm x 19.5 mm)

3.16 in x 4.79 in x

0.85 in

(80 mm x 121.5 mm x 21.5 mm)

Product Weight

Pigtail: 3.35 oz (95 g)

Terminal: 2.65 oz (75 g)

Pigtail: 3.88 oz (110 g)

Terminal: 3.17 oz (90 g)

Pigtail: 4.94 oz (140 g)

Terminal: 4.23 oz (120 g)

Pigtail: 5.64 oz (160 g)

Terminal: 4.94 oz (140 g)

Operating Voltage 12V DC

Current Draw3

NSC4: 60 mA Peak: 250 mA

Max. Avg: 70 mA IPM5: 45 mA

NSC4: 65 mA Peak: 250 mA

Max. Avg: 75 mA IPM5: 48 mA

NSC4: 65 mA Peak: 250 mA

Max. Avg: 75 mA IPM5: 45 mA

NSC4: 70 mA Peak: 250 mA

Max. Avg: 80 mA IPM5: 55 mA

Device Input and Output Input: Tri-color LED, Buzzer, Hold @ Active Low

Output: Tamper Relay 0-60V DC @ 100mA Max (Dry Contact)

Operating Temperature & Humidity

-31° F to +150° F (-35° C to +66°…