Add 1 3b. HERCULES_Tech_Spec_Brochure_BiParting_Sliding_Door_FA441820R0010 B.419.pdf

TECHNICAL SPECIFICATIONS

BI-PART SLIDING DOORS

TECHNICAL SPECIFICATIONS | HERCULES® BI-PART SLIDING DOORS

BI-PART

SLIDING DOORS

The Hercules Bi-Part Sliding Door is ideal for applications where fast opening and seal tight closing are important.

These doors are perfect for material handling traffic such as forklifts and pallet jacks.

All Bi-Part sliding doors are available for both cooler and freezer applications and for interior or exterior use. The Hercules Bi Part Sliding Door is also available with both electric (EBP) and manual operation (MBP).

Design Features

• 5 year limited warranty

• Every electric door is bench tested before shipping

• Durability and safety are ensured by use of NEMA-4 control box for electric doors

• Advanced, adaptive controller for electric doors with 7 programmable inputs for accessories

• Heavy duty hardware and tracks are built for long lasting usage.

• Bearings are sealed in grease and require no further lubrication. Maintenance is low and consists of light machine oil on easy to remove drive chain and track.

• Pneumatic safety device for electric doors along the entire length of the leading edge stops and reverses the door to open position if an obstruction is encountered while closing

Material Specifications (Custom design available)

Height: 7’ 8’ 10’ 12’ 14’ Width: 5’ 6’ 8’ 10’ Thickness: 4” 6” R-Value: 33 49 Insulation: Class 1 foamed in place Modified

Polyisocyanurate Door Panel: Interior frame consists of high density plastic lumber clad with the specified metal; the core is injected with foamed-in-place modified polyisocyanurate. All seams are sealed.

Vertical casings & header: High density plastic lumber clad with the specified metal

Metal: 24, 26 gauge stucco embossed, painted galvanized steel.

Hardware: Heavy duty hardware and track coated for corrosion resistance, including:

- Double “J” door track

- Each door panel suspended on two 4 wheel ball-bearing trolleys

- Floor mounted, adjustable, non-marring, self-lubricating stay rollers

- Spring loaded idler sprocket with adjustment to maintain proper drive chain tension

- Manual disconnects on front and back of door with concealed release on wallside

EBP/MBP

HERCULES® BI-PART SLIDING DOORS | TECHNICAL SPECIFICATIONS

Gaskets: Cloth reinforced neoprene gaskets, bulb type on vertical casings and header and sweeper gasket on bottom of door panel

Safety Edge: Full height pneumatic instant reversing safety edge on leading edge of door panel

Defrost: Freezer doors equipped with 120 volt perimeter cables to keep gaskets frost free

Operation: Manual, Electric

Options

• Stucco embossed aluminum cladding

• Stainless steel cladding

• White F.R.P. with stainless trim

• Freezer door with 120 V perimeter heater cable

• 123⁄4” x 123⁄4” insulated or heated vision panel

• Rain hood

• Kickplates

• Locking device

• Inside casings

• Meat rail construction

• Standard or high speed operator

• Radio control open/close

• Photo cell open/close/safety

• Motion detector open/close/safety

• Loop detector open/close/safety

• Time delay close

• Closing signal warning control

• Partial opening pedestrian control

• Electric interlock

• Heated control panel

• Custom designed doors to meet your individual needs

Hercules Power Operator UL Listed

• Operator listed under UL standard 508A for industrial control panels

• Brushless DC motor system provides necessary power in compact package

• NEMA-4 control box with adaptive controller

• Pneumatic instant reversing safety edge

• External wiring enclosed in waterproof flexible conduit

• Calibration to any door size with external battery backup

• Roller drive chain incorporating special link for manual disconnect

Operating Speed

Standard Electric Operator The standard operating speed of a roller chain drive operator with standard electric motor is fully adjustable from 20” per second to 50” per second through operator calibration and different gear drive options. To increase the opening or closing speed the following operator is available.

Optional High Speed Electric Operator Hercules Doors offers an optional High Speed Electric Operator. The High Speed Operator consists of a higher power electric motor for all doors. This operator provides fully adjustable opening speeds from 30” inches per second up to 80” per second through operator calibration and different gear drive options.

Operator Electric Requirements

Operator Voltage

Amp Draw

Standard Speed

115 VAC 20 A

208 VAC 12 A

230 VAC 10 A

460 VAC 5 A

575 VAC 4 A

Operator Voltage

Amp Draw

High Speed

115 VAC 20 A

208 VAC 12 A

230 VAC 10 A

460 VAC 5 A

575 VAC 4 A

TECHNICAL SPECIFICATIONS | HERCULES® BI-PART SLIDING DOORS

HERCULES® BI-PART SLIDING DOORS | TECHNICAL SPECIFICATIONS

Kingspan Insulated Panels, Inc.

726 Summerhill Drive

Deland, FL 32724-2024

Phone (386) 626-6789

E-Mail: info@kingspanpanels.us www.kingspanpanels.us