A702 Finishes at Ceramic Tile Locations 060326.pdf
PDF 536 KB Posted
- Attached to
- Invitation for Bids for Construction of Washington County C. Wayne Stevens, Jr. Public Safety Facility
- Solicitation number
- IFB-119574
- Issued by
- Stafford County, Glen Lyn Town, Virginia
About this file
This is an architectural finish drawing for ceramic tile locations prepared by The Lane Group, Inc. for the Washington County, Virginia Emergency Medical Services Facility located in the Highlands Business Park in Glade Spring, Virginia. The drawing, designated A702 and dated June 5, 2026, specifies finishes for three bathrooms within the facility: the decontamination room #115, men's bathroom #103A, and women's bathroom #104A. The document details tile specifications including 2" x 2" ceramic mosaic floor tile for shower areas, 3" x 12" thin-set subway tile for shower walls, and 12" x 24" non-slip porcelain floor tile for bathroom floors in a running bond pattern with 1/8" joints. The drawing also provides detailed construction specifications for shower bases, including prefabricated shower pan installation with latex-modified mortar beds sloping to centered drains at 1/4" per foot, and ADA-compliant 1/2" x 6" solid surface shower thresholds with beveled edges.
The drawing includes comprehensive waterproofing requirements and acceptable product specifications for shower water-proofing membranes, joint sealants, and liquid-applied waterproofing coatings meeting ANSI A118.10 standards. Acceptable waterproofing products include Schluter Kerdi systems, Laticrete Hydro Ban products, Mapei Mapeguard WP 200 and Aqua Defense, Sika Sikaflex, Custom Building Products Redgard, and USG Durock liquid waterproofing. The specifications emphasize proper substrate preparation, including solid pressure-treated wood blocking at shower perimeters, concrete slab recessing with reinforcement, and appropriate underlayment installation. Architectural finishes color selections are to be determined by the architect, and all shower accessories including seats, grab bars, robe hooks, and curtain locations are referenced to drawing A401 for men's and women's bathrooms and drawing A403 for the decontamination room.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
VITREOUS CHINALAVATORYGREENWICHK-2032
0 1' 2' 4'
SHEET:
DATE:
NO. REVISION DATE
DRAWN BY CHECKED BY
THE LANE GROUP INC.
PROJECT NO.
th e LA N E
G R
O U
P en gi ne er in g ar ch ite ct ur e en vi ro nm en ta l
Ab in gd on
I Bi g St on e
G ap
I G al ax w w w .th el an eg ro up in c.
co m
Va lle y St re et
N W
Ab in gd on
, V A
.2
.8
- o ffi ce
N
EW
E M
S
FA
C
IL
IT
Y
FO
R
W
AS
H
IN
G
TO
N C
O U
N
TY
, V
IR
G
IN
IA
H
IG
H
LA
N D
S
BU
SI
N
ES
S
PA
R
K
OW
EN
S
DR
IV
E
- G
LA
DE
S
PR
IN
G, V A
01-30-2026
A702 ADDED 06/05/2026
DMW MRL
TLG-2515
A702
FI
N
IS
H
ES
A
T C
ER
AM
IC
T
IL
E
LO
C
AT
IO
N S
0 1' 2' 4'
0 1/2' 1' 1 1/2'
AutoCAD SHX Text
ESTCODE
AutoCAD SHX Text
2" X 2" CERAMIC MOSAIC FLOOR TILE IN SHOWER.
AutoCAD SHX Text 1/2" X 6" SOLID SURFACE (CORIAN TYPE) SHOWER THRESHOLD. SET IN FULL BED OF SEALANT. BEVEL EDGES 1/4" FOR ADA COMPLIANCE.
AutoCAD SHX Text 3'-4"
AutoCAD SHX Text 6"
AutoCAD SHX Text 4'-0"
AutoCAD SHX Text 5'-8"
AutoCAD SHX Text 2" x 2" CERAMIC MOSAIC FLOOR TILE IN DRYING AREA. NO MEMBRANE REQUIRED.
AutoCAD SHX Text
BULLNOSED OR BEVEL CUT PORCELAIN TILE TO TERMINATE BELOW DOOR. MATCH FLOOR TILE.
AutoCAD SHX Text
3" X 12" THIN-SET SUBWAY TILE ON THREE WALLS AT SHOWER.
AutoCAD SHX Text
3" X 12" THIN-SET SUBWAY TILE ON WETWALL.
AutoCAD SHX Text NOTE: SHOWER ACCESSORIES ARE NOT SHOWN ON THIS DRAWING. SEE DRAWING A401 FOR SEAT, GRAB BAR, ROBE HOOKS, AND CURTAIN LOCATIONS.
AutoCAD SHX Text 2" WIDE (+/-) BULLNOSED OR BEVEL CUT TILE AT LEADING EDGE OF DRYING AREA. MATCH MOSAIC FLOOR TILE..
AutoCAD SHX Text 5'-4"
AutoCAD SHX Text 5'-4"
AutoCAD SHX Text 1'-0"
AutoCAD SHX Text 9'-10" (+/-)
AutoCAD SHX Text 9'-4"
AutoCAD SHX Text 4'-8"
AutoCAD SHX Text
2" X 2" CERAMIC MOSAIC FLOOR TILE IN SHOWER.
AutoCAD SHX Text 1/2" X 6" SOLID SURFACE (CORIAN TYPE) SHOWER THRESHOLD. SET IN FULL BED OF SEALANT. BEVEL EDGES 1/4" FOR ADA COMPLIANCE.
AutoCAD SHX Text 12" X 24" NON-SLIP PORCELAIN FLOOR TILE. LAY IN RUNNING BOND PATTERN WITH 1/8" JOINTS. COLOR SELECTED BY THE ARCHITECT.
AutoCAD SHX Text 2" WIDE (+/-) BULLNOSED OR BEVEL CUT PORCELAIN TILE TO TERMINATE BELOW DOOR. MATCH MOSAIC FLOOR TILE.
AutoCAD SHX Text PROVIDE APPROXIMATELY 12" X 12" MITRE CUTS RADIATING FROM THE DRAIN EDGES FOR SEAMLESS PROFESSIONAL APPEARANCE. (DRAIN MAY SERVE AS STARTING POINT FOR TILE LAYOUT FOR A CLEAN, SMOOTH, CONSISTENT GROUT LINE).
AutoCAD SHX Text 4'-10"
AutoCAD SHX Text
3" X 12" THIN-SET SUBWAY TILE ON THREE SHOWER WALLS AND ON WETWALL.
AutoCAD SHX Text
3" X 12" THIN-SET SUBWAY TILE ON WETWALL AND SIDEWALL.
AutoCAD SHX Text NOTE: SHOWER ACCESSORIES ARE NOT SHOWN ON THIS DRAWING. SEE DRAWING A403 FOR SEAT, GRAB BAR, ROBE HOOKS, AND CURTAIN LOCATIONS.
AutoCAD SHX Text F.D.
AutoCAD SHX Text
EXTEND FLOOR TILE TO WETWALL AND SET VANITY / LINEN CABINET ON FLOOR TILE.
AutoCAD SHX Text
3'-4" AT RM. 115
AutoCAD SHX Text
EQUAL
AutoCAD SHX Text 6"
AutoCAD SHX Text
SQUARE FLOOR DRAIN AT CENTERLINE OF SHOWER EACH WAY.
AutoCAD SHX Text 1/2" X 6" SOLID SURFACE THRESHOLD SET IN FULL BED OF SEALANT. BEVEL EDGES 1/4" FOR ADA COMPLIANCE.
AutoCAD SHX Text
AutoCAD SHX Text SOLID PRESSURE TREATED WOOD BLOCKING BETWEEN STUDS AT SHOWER PERIMETER. TURN SHOWER PAN MEMBRANE UP TO TOP OF WOOD BLOCKING ON THREE SIDES.
AutoCAD SHX Text
CERAMIC MOSAIC TILE OVER LATEX- MODIFIED MORTAR BED. (SLOPE TO DRAIN).
AutoCAD SHX Text THIN-SET PORCELAIN TILE OVER 1/2" CEMENTITIOUS BACKER BOARD. (EMBED BOTTOM IN MORTAR BED).
AutoCAD SHX Text
PREFAB. SHOWER PAN (FOLD UP WALLS X 7" MIN.).
AutoCAD SHX Text RECESS CONCRETE SLAB AT SHOWER LOCATIONS. PROVIDE MORTAR BED THAT SLOPES TO CENTERED DRAIN AT 1/4" PER FOOT. (SHOWER INSTALLER COORDINATE RECESS DEPTH WITH G.C. BEFORE FLOOR SLAB IS PLACED).
AutoCAD SHX Text 4" X 4000 PSI REINF. CONCRETE SLAB ON 15 MIL. POLYETHYLENE VAPOR BARRIER AND 4" COMPACTED STONE. (SEE STRUCTURAL DRAWINGS FOR REINFORCEMENT).
AutoCAD SHX Text
THIN-SET PORCELAIN TILE OR CERAMIC MOSIAIC TILE ON CONCRETE SLAB.
AutoCAD SHX Text
EQUAL
AutoCAD SHX Text
4'-10"AT RMS. 103A & 104A
AutoCAD SHX Text SUBSTRATE SHOWN IS THAT WHICH OCCURS AT DECON RM. #115. SUBSTRATE AT ROOMS 103A AND 104A IS 8" CONCRETE MASONRY UNITS.
AutoCAD SHX Text
FACE OF METAL STUD OR FACE OF CONCRETE MASONRY UNIT.
AutoCAD SHX Text
1. FOR SHOWER WATER PROOFING MEMBRANE (SHOWER PAN), PROVIDE FOR SHOWER WATER PROOFING MEMBRANE (SHOWER PAN), PROVIDE A PLIABLE POLYETHYLENE WATERPROOFING MEMBRANE AND VAPOR RETARDER. ACCEPTABLE PRODUCTS INCLUDE: SCHLUTER "KERDI", "KERDI", LATICRETE "HYDRO BAN", AND "HYDRO BAN", AND MAPEI "MAPEGUARD WP 200". "MAPEGUARD WP 200". OTHER PRODUCTS CONSIDERED UPON REQUEST. 2. WATERPROOF THE JOINT BETWEEN THE MORTAR BED AND SHOWER WATERPROOF THE JOINT BETWEEN THE MORTAR BED AND SHOWER PAN X 2" (+/-) WIDE. ACCEPTABLE PRODUCTS INCLUDE: SCHLUTER "KERDI FIX", SIKA "SIKAFLEX CONSTRUCTION SEALANT", AND "SIKAFLEX CONSTRUCTION SEALANT", AND LATICRETE "HYDRO BAN ADHESIVE & SEALANT." "HYDRO BAN ADHESIVE & SEALANT." OTHER PRODUCTS CONSIDERED UPON REQUEST. 3. AT CMU WETWALLS, COAT BLOCK WITH A LIQUID APPLIED AT CMU WETWALLS, COAT BLOCK WITH A LIQUID APPLIED WATERPROOFING MEMBRANE THAT MEETS ANSI A118.10 STANDARDS. ACCEPTABLE PRODUCTS INCLUDE: LATICRETE "HYDRO BAN", "HYDRO BAN", MAPEI "AQUA DEFENSE" AND "AQUA DEFENSE" AND CUSTOM BUILDING PRODUCTS "REDGARD". "REDGARD". OTHER PRODUCTS CONSIDERED UPON REQUEST. 4. AT CEMETITIOUS BACKER BOARD LOCATIONS, PROVIDE A LIQUID AT CEMETITIOUS BACKER BOARD LOCATIONS, PROVIDE A LIQUID APPLIED MEMBRANE OVER THE BACKER BOARD. ACCEPTABLE PRODUCTS INCLUDE: LATICRETE "HYDRO BAN", "HYDRO BAN", USG "DUROCK LIQUID WATERPROOFING", "DUROCK LIQUID WATERPROOFING", CUSTOM BUILDING PRODUCTS "REDGARD", AND PRODUCTS "REDGARD", AND MAPEI "AQUA DEFENSE". "AQUA DEFENSE". OTHER PRODUCTS CONSIDERED UPON REQUEST.
AutoCAD SHX Text
SCALE: 1/2" = 1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
WOMEN'S BATHROOM # 104A FINISHES
AutoCAD SHX Text
SCALE: 1/2" = 1'-0"
AutoCAD SHX Text
NORTH
AutoCAD SHX Text
DECON RM. #115 - FINISHES
AutoCAD SHX Text
MEN'S BATHROOM # 103A FINISHES (SIMILAR)
AutoCAD SHX Text
SCALE: 1 1/2" = 1'-0"
AutoCAD SHX Text
TYPICAL SHOWER BED DETAIL
AutoCAD SHX Text A702
AutoCAD SHX Text
AutoCAD SHX Text
TYPICAL TILE NOTES
| Sheets and Views |
| A702 |
File details come from the government source that posted it. Updated .