A06_-_Water_Catchment_Drawings.pdf
PDF 2 MB Posted
- Attached to
- Hickman Wildlife Water Catchment and Pipe Fence
- Solicitation number
- 140L1726Q0054
About this file
This document is a set of technical design drawings and construction specifications for a water catchment structure prepared by the United States Department of the Interior Bureau of Land Management, dated March 11, 2019.
The drawings provide detailed specifications for a water catchment system consisting of two separate steel frames with outer members constructed of four 6-inch receiver channel purplins. Key structural components include 26-gauge pro panel roof with 6-inch C-purfins spaced at 4-inch centers on a 40:1 slope, 2-3/8-inch drill stem pipes for horizontal and vertical support, and concrete anchors with 3-inch minimum concrete cover between ground and pipe. The catchment frame measures 20 feet wide by 25 feet long by approximately 11-12 feet high, with a gutter system sloped toward a reservoir inlet. All receiver channel purlin-to-pipe and purlin-to-purlin vertical and lateral connections must include gussets welded continuously at all mating surfaces with no lack welds permitted. Minimum gusset dimensions are 6 inches by 4 inches for pipe-to-pipe connections, 6 inches by 1 inch for vertical-pipe-to-purlin connections, and 6 inches by 1 inch for lateral-pipe-to-purlin connections, all saddle-cut for proper welded connection. The gap between frames must accommodate a 6-inch gutter to the reservoir, with a vertical distance of no less than 24 inches from the bottom of gutter fitting to reservoir inlet. Additional specifications address roof overlaying, end caps on open pipes, sheetmetal gutter fabrication, and site-specific height variations to be installed per Government instructions.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AutoCAD SHX Text 3" MINIMUM CONCRETE COVER BETWEEN GROUND & PIPE 3000 PSI CONCRETE DOME TOP OF CONCRETE
AutoCAD SHX Text 36"
AutoCAD SHX Text
TYPICAL DETAIL CONCRETE ANCHOR
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 5-7-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING END-VIEW
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 6" Receiver Channel Purline 4 Ea Outer Frame Members For Both Frames
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text
EXISTING GROUND
AutoCAD SHX Text
CONCRETE ANCHORS SEE TYP. DET.
AutoCAD SHX Text 12"
AutoCAD SHX Text 1/4" Weld Typ., All Connections See Catchment Corner Catchment Corner Details Sheet for for Flanges & Gussets
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Horizontal and Vertical Pipes Saddle-Cut Vertical Pipes
AutoCAD SHX Text Heigth Varies See Note 14.
AutoCAD SHX Text Gutter-Match Purlins for Width. Depth Varies. Gutter Flowline Match Purlin Bottom Flange at Edge Nearest Reservoir, Match Top Flange Purlin at Opposite End. See Notes 6, 7, & 8. Overall gutter fall to be 3".
AutoCAD SHX Text Downspout Assembly 3" Schedule 80 PVC
AutoCAD SHX Text 3' Min, See Note 8.
AutoCAD SHX Text 2' Min, See Note 8.
AutoCAD SHX Text
RESERVOIR
AutoCAD SHX Text 12" Overhang Typ
12" Overhang Typ
SCALE:
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING GUSSETTING
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DATE
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 6" C-Purlin
AutoCAD SHX Text 6"x " Vertical Gusset14" Vertical Gusset
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Corner Support Saddle-Cut Vertical Pipe
AutoCAD SHX Text Center Support
AutoCAD SHX Text 14" Welds @ all Mating Edges
AutoCAD SHX Text 6" Receiver Channel Purlin
AutoCAD SHX Text 6" Receiver Channel Purlin (along outer edges)
AutoCAD SHX Text 4"x " Lateral Gusset 14" Lateral Gusset @ All Corner Purlin-to-Pipe Connections
AutoCAD SHX Text 6"x " Vertical 14" Vertical Gusset
AutoCAD SHX Text 14" Welds @ all mating edges
AutoCAD SHX Text
CORNER GUSSETTING DETAILS
INTERIOR GUSSETTING DETAILS
Reservoir
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING SUPPORT SPACING
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 2-3/8" Drill Stem Frame
AutoCAD SHX Text 6" Wide x 6" Deep Sheetmetal Gutter
AutoCAD SHX Text 2-3/8" Drill Stem Vertical Pipe, typ
AutoCAD SHX Text 6" Receiver Channel Purlines 4 Ea Outer Frame Members For Both Frames
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
AutoCAD SHX Text C-Purline
C-Purline
3" MINIMUM CONCRETE COVER BETWEEN GROUND & PIPE 3000 PSI CONCRETE DOME TOP OF CONCRETE
AutoCAD SHX Text 36"
AutoCAD SHX Text
TYPICAL DETAIL CONCRETE ANCHOR
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING SIDE-VIEW
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 6" C-Purline Spaced 4' o/c
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text 6"
AutoCAD SHX Text 20'
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text
EXISTING GROUND
AutoCAD SHX Text
CONCRETE ANCHORS SEE TYP. DET.
AutoCAD SHX Text 12"
AutoCAD SHX Text 1/4" WELD Typ., All Connections
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Saddle-Cut Vertical Pipes
AutoCAD SHX Text 0.9812
AutoCAD SHX Text Heigth Varies See Note 14.
Gutter-Match Purlins for Width. Depth Varies. Gutter Flowline Match Purlin Bottom Flange at Edge Nearest Reservoir, Match Top Flange Purlin at Opposite End. See Notes 6, 7, & 8.
Reservoir
AutoCAD SHX Text
SCALE:
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING TOP-VIEW
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 6" C-Purline Spaced 4' o/c
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Frame Purlines Over Support Frame's Outer Edges are 6" Reciever Channel Purlines
AutoCAD SHX Text Slope 40:1 (6" fall)
AutoCAD SHX Text 6" Wide x 6" Deep Sheetmetal Gutter 3" Fall to Match Bottom-Front Edge of Receiver Channel Purlines
AutoCAD SHX Text No Slope
AutoCAD SHX Text 3" I.D. PVC Downspout Assembly
AutoCAD SHX Text 3' Min, See Note 8.
No Slope
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING CONSTRUCTION NOTES
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
NOTES 1. The structure is composed of two seperate frames. The structure is composed of two seperate frames. The outer members of each frame shall be constructed of 4 ea 6" receiver channel purlins. All receiver channel purlin-to-pipe and receiver channel purlin-to-pipe and purlin-to-purlin vertical and lateral connections must have a gusset installed. 2. Straps connecting purlins to pipe support frame Straps connecting purlins to pipe support frame are 2-1/2" x ". 14". 3. Pipe to pipe gussets are to be min. 6"x ". Pipe to pipe gussets are to be min. 6"x ". 14". 4. Vertical-pipe-to-purlin gussets are to be min. Vertical-pipe-to-purlin gussets are to be min. 6" x ". Lateral-pipe-to-purlin gussets are to be 14". Lateral-pipe-to-purlin gussets are to be min. 6" x ". All gussets welded to pipe shall be 14". All gussets welded to pipe shall be All gussets welded to pipe shall be saddle-cut for proper welded connection. 5. Pipe-to-pipe connections: vertical pipe shall be Pipe-to-pipe connections: vertical pipe shall be saddle-cut for proper welded connection. 6. Gap between frames should be no less than 6.5" Gap between frames should be no less than 6.5" to accommodate 6" gutter (to reservoir). 7. Frame is level front-to-back. Gutter is sloped Frame is level front-to-back. Gutter is sloped vs sloping frame. Slope gutter 3" toward reservoir. 8. Vertical distance from bottom of gutter fitting to Vertical distance from bottom of gutter fitting to reservoir inlet shall be no less than 24" to accomodate plumbing. Horizontal distance from the catchment frame to the reservoir shall be no less than 3'. 9. Welds shall be continuous along all mating Welds shall be continuous along all mating surfaces, no tack welds. 10. Where c-purlins tie into receiver channel purlins Where c-purlins tie into receiver channel purlins along outer edges of frame, see note 9. 11. There shall be no overhang of tin roofing past There shall be no overhang of tin roofing past edge purlin. Fold sheetmetal over purlin edge. 12. All open pipes shall be capped @ ends. All open pipes shall be capped @ ends. 13. Sheetmetal gutter to be fabricated by others Sheetmetal gutter to be fabricated by others & installed by contractor. 14. Heigth of catchment varies from site to site, Heigth of catchment varies from site to site, due to changes in terrain, etc. Install per due to changes in terrain, etc. Install per Government Instructions.
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING CORNER DETAILS
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Corner Support Install End Caps
AutoCAD SHX Text 4"x " Lateral Gusset 14" Lateral Gusset 14" Welds @ all mating edges
AutoCAD SHX Text 6" Receiver Channel Purlin
AutoCAD SHX Text Receiver Channel Purlins 14" Welds @ all mating edges
AutoCAD SHX Text Tin Roofing
AutoCAD SHX Text Tin Roofing
6"x " Vertical Gusset 14" Vertical Gusset 14" Welds @ all mating edges
AutoCAD SHX Text
SHEET: 1 OF 1
AutoCAD SHX Text
REVIEWED JAF
AutoCAD SHX Text
APPROVED
AutoCAD SHX Text
DRAWN BY: HFB
AutoCAD SHX Text
DATE: 3-11-19
AutoCAD SHX Text
DESIGNED CM
AutoCAD SHX Text
ALWAYS THINK
AutoCAD SHX Text
SAFETY
AutoCAD SHX Text
STANDARD DETAIL DRAWING NO.
AutoCAD SHX Text
UNITED STATES DEPARTMENT OF THE INTERIOR
AutoCAD SHX Text
BUREAU OF LAND MANAGEMENT
AutoCAD SHX Text
WATER CATCHMENT DRAWING GUSSETTING
AutoCAD SHX Text
REV. NO.
AutoCAD SHX Text
DESCRIPTION
AutoCAD SHX Text
DATE
AutoCAD SHX Text \\ILMNMAB3DS1\abLoc$\Individual Employee Folders\EMPLOYEES\hbuckner\SOCORRO SUPPORT\SFO Wildlife Water Catchment 2019
AutoCAD SHX Text
NONE
AutoCAD SHX Text 6"x " Vertical 14" Vertical Gusset
AutoCAD SHX Text 6" C-Purlin
AutoCAD SHX Text 6"x " Vertical Gusset14" Vertical Gusset
AutoCAD SHX Text 2-3/8" Drill Stem Pipe
AutoCAD SHX Text 2-3/8" Drill Stem Pipe Corner Support
AutoCAD SHX Text Center Support
AutoCAD SHX Text 14" Welds @ all mating edges
AutoCAD SHX Text 14" Welds @ all mating edges
AutoCAD SHX Text 6" Receiver Channel Purlin
AutoCAD SHX Text 6" Receiver Channel Purlin (along outer edges)
4"x " Lateral Gusset 14" Lateral Gusset @ All Corner Purlin-to-Pipe Connections
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT END.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT END |
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT GUSSETS_Updated_12_19.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT GUSSETS |
| A06 - WATER CATCHMENT 3-8-2019-SUPPORT SPACING.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-SUPPORT SPACING |
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT SIDE_Updated_12_19.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT SIDE |
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT TOP (1).pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT TOP |
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT GUSSETS AND CORNER B-W.pdf |
| A06 - WATER CATCHMENT 3-8-2019-CATCHMENT NOTES 2.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT NOTES |
| A06 - WATER CATCHMENT 3-26-2019 CORNER DETAILS (1).pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT CORNER |
| A06 - WATER CATCHMENT 3-26-2019 GUSSETTING.pdf |
| Sheets and Views |
| WATER CATCHMENT 3-8-2019-CATCHMENT GUSSETS |
File details come from the government source that posted it. Updated .