3520523227i_Atachment11.xlsx

Instructions

Body Armor, Law Enforcement

INSTRUCTIONS:

This "Product Attestation" is to be forwarded to the Manufacturer by the Bidder, completed, signed, placed on the Manufacturer’s Corporate Letterhead, returned to the Bidder by the Manufacturer, and submitted to Procurement Services. An authorized representative of the Manufacturer Must sign this attestation.

Per Section 3 - Specifications, Bidders Must provide a Product attestation that each Manufacturer's model under the offered Product Lines that meets the specified NIJ Standards. In addition to the Product attestion, Bidder(s) Must provide an electronic copy of the CPL with each offered model highlighted for items B-D below.

B. Body Armor, Ballistic-resistant: All models of Ballistic-resistant Vests and plates (except Special Threat Plates or In Conjunction With Plates) Must carry the NIJ Standard-0101.06 July 2008 Protection Levels IIA, II, IIIA, III, or IV certification and Must be included on the CPL with a model status of “active”. If NIJ updates this standard, Contractor(s) Must carry the current NIJ Standard certification for Products at time of delivery.

C. Body Armor, Ballistic-resistant Special Threat Plates: All models of Special Threat Plates Must meet the NIJ Standard-0101.06 July 2008. If NIJ updates this standard, Contractor(s) Must meet the current NIJ Standard for Products at time of delivery.

D. Body Armor, Ballistic-resistant In Conjunction With Plates: All Models of In Conjunction With Plates Must be used only when layered with a specified model(s) of body armor listed on the CPL.

E. Body Armor, Stab-resistant: All models of Stab-resistant Vests and plates Must carry the NIJ Standard–0115.00 September 2000 Protection Levels 1, 2, or 3 certification for: Spike and Edged Blade and Must be included on the CPL with a model status of “active”. If the NIJ updates this standard, Contractor(s) Must carry the current NIJ Standard certification for Products at time of delivery.

F. Body Armor, Combination Armor: All models of Combination Armor Vests and plates Must carry the NIJ Standard-0101.06 July 2008 Protection Levels IIA, II, IIIA, III, or IV certification and NIJ Standard–0115.00 September 2000 Protection Levels 1, 2, or 3 certification and Must be included on the CPL with a model status of “active”. If the NIJ updates either standard, Contractor(s) Must carry the current NIJ Standard certification for both Ballistic-resistant and Stab-resistant Body Armor at time of delivery.

G. Body Armor, Bomb Suits: All models of Bomb Suits Must meet or exceed the NIJ Standard–0117.01 April 2016. If NIJ updates this standard, Contractor(s) Must meet or exceed the current NIJ Standard for Products at time of delivery.

H. Helmets, Ballistic-resistant: All models of Ballistic-resistant helmets Must meet or exceed the NIJ Standard-0106.01 December 1981 Protection Levels IIA, II, or IIIA. If NIJ updates this standard, Contractor(s) Must meet or exceed the current NIJ Standard for Products at time of delivery.

I. Helmets and Visors, Riot: All models of Riot helmets and visors Must meet or exceed the NIJ Standard-0104.02 October 1984. If NIJ updates this standard, Contractor(s) Must meet or exceed the current NIJ Standard for Products at time of delivery.

J. Ballistic–resistant Products (except Vests, plates and helmets): All models of Ballistic-resistant Products including shields, clipboards, briefcases, blankets, etc. Must meet the NIJ Standard-0108.01 September 1985 Protection Levels IIA, II, IIIA, III, or IV. If NIJ updates this standard, Contractor(s) Must meet the current NIJ Standard for Products at time of delivery

Attestation

NEW YORK STATE

IFB 23227

Group 35205 - Body Armor, Law Enforcement ATTACHMENT 11 - Product Attestation

This "Product Attestation" is to be forwarded to the Manufacturer by the Contractor, completed, signed, placed on the Manufacturer’s Corporate Letterhead, returned to the Contractor by the Manufacturer, and submitted to Procurement Services. An authorized representative of the Manufacturer Must sign this attestation.

The Manufacturer is attesting that each of their models under the appropriate Product Lines meets the specified NIJ Standards and carries the applicable certification.

The Manufacturer is to select their Product Line(s) offered under this Solicitation by using the "drop-down" box in column "E" below and the corresponding question in column "F".

For the Body Armor Product Line, Contractors are also required to submit an electronic copy of the CPL with each offered model of Vests and plates highlighted.

Sheet2