9-Attachment 9-2026 Ford F350 or Equivalent Valve Truck w arrowboard.pdf
PDF 183 KB Posted
- Attached to
- 2026 Fleet Purchase
- Solicitation number
- 2026-016
- Issued by
- Allegheny County, Philadelphia City, Pennsylvania
About this file
This is a minimum specifications attachment for a 2026 Ford F350 or equivalent valve truck with arrowboard, submitted as part of Pittsburgh Water's 2026 Fleet Purchase bid opportunity in Pennsylvania. The document outlines comprehensive technical requirements for a single custom service vehicle equipped with specialized hydraulic and maintenance capabilities. The truck specifications include a 6.2L V8 gasoline engine with automatic transmission, single rear wheels, and standard safety features such as backup camera, sensors, and alarm systems. The custom service body features a 98-inch-long, 76-inch-wide, and 40-inch-high configuration with remote lock systems, LED compartment lighting, and stainless steel hardware throughout. The vehicle must include a full-width storage bumper with mounting provisions for a standard duty vise, a manually operated crane with 800-pound lifting capacity and 25-foot galvanized cable, and a hydraulic system powered by a PTO pump.
The upfit specifications require integration of a Wachs TM-7 machine for valve exercising operations, a Stanley BR45 hydraulic breaker with 50 feet of hydraulic line, and a Fabco Power HYDRO 350CX-6 hydraulic generator. The vehicle must include a HD aluminum cargo area cover with slide-open rear section and hinged doors, comprehensive LED lighting systems including a Whelen 48-inch amber LED light bar with multiple flash patterns, and a Wanco WLP90B5-LSA 30-by-60-inch low-profile arrow board with 15-light sequential directional function. Construction materials specified include 12-gauge galvaneal steel flooring with diamond pattern, 14-18 gauge two-sided galvaneal steel body panels, stainless steel hardware, and a 12-stage automotive electro-cathodic immersion prime paint system with white polyester powder coat finish. The document does not provide pricing, quantity of vehicles, delivery timelines, or contract award dates.
View the file
Other files
Show all 19
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Attachment 9
Minimum Specifications:
Standard Equipment per manufacturer
6.2L V8 gasoline engine
Automatic transmission with PTO provision
Single rear wheels
Automatic locking differential
Additional leaf each side
Spare Key Set (Total of three)
White exterior
Medium Earth Gray, vinyl seat trim
Power Door Locks
Power Windows
Bluetooth for phone
Rear view camera OEM kit with backup sensors
Backup Alarm, 97 decibels
Upfitter switches (6)
Safety Reflector Triangle Kit
Fire Extinguisher 2.5 LB Dry Chemical BC Rated
Outside West-Coast type mirrors
Platform running boards
Custom Service Body Upfit specifications:
DIMENSIONS
98” long, 76 ½” wide, 40 ¾” high, 14” compartment depth
BODY OPTION
Remote lock system with audible alarm activated with key fob transmitter
Compartment and cargo area LED lighting activated when doors are unlocked
Automatic timed shutoff for compartment lights
Bright treadplate aluminum on front of body and top of tailgate
Stainless steel grab handle on the street side rear of body
UNDERSTRUCTURE
Front crossmember floor width 7GA formed steel channel
Rear crossmember full width 5” structural channel
Intermediate crossmembers 5” structural channel
FLOOR
12GA 2 sided A60 galvaneal pressed diamond pattern steel
DOORS
1 ¼” double panel construction
18 and 20GA 2 sided A60 galvaneal steel with full length hat section between panels
Nitrogen gas strut door holders
Streetside front compartment to have door hinged at front to open forward for mounting of WACH’s machine
DOOR SEALS
½” bubble type seal
Die formed v-channels to direct water from compartments
DOOR HINGES
10GA zinc plated steel Hidden Hinge with ¼” stainless steel pins at pivot points
Furnish and install slide and lock tracks on both walls of cargo area.
LATCHES
Stainless steel rotary locks
No exposed fasteners
Double bitted lock cylinders
Adjustable strikers
BODY CONSTRUCTION
Combination 14, 16 and 18GA 2 sided A60 galvaneal steel
SLAM ACTION TAILGATE
Double panel with 14GA inner and outer panels A60 galvaneal steel
Stainless steel removable knee braces
Stainless steel locking rods, hinge rods and striker channels
CRANE REINFORCEMENT
Rear compartment – curbside
½” steel plate top of compartment
(2) 4” x 4” x ½” structural steel angle supports
Inside of compartment lined with 3/8” steel plate on 3 sides
OUTRIGGER TUBE ASSEMBLY
2 ½” x 2 ½” x 3/16” tube fastened to right rear compartment with reinforced plates
Manual out/down style installed on curbside rear
SHELVING
18GA spangled galvanized steel
250LB static load capacity
ALUMINUM RECESSED FUEL FILL
DOT LIGHTING AND LED STOP/TAIL/TURN AND BACKUP LIGHTS
PRIMER
12 stage automotive electro-cathodic immersion prime paint system
UNDERCOATING
Low VOC solvent based sound sealer
POWDERCOAT
Dry white polyester plastic powder applied with high voltage spray equipment, bake oven melts powder and fuses with primer
WORKBENCH/STORAGE BUMPER
Full width storage bumper fabricated using 3/16” smooth aluminum with top opening lid with hasp
Reinforced for vice mount. Apply full width conspicuity striping.
Furnish and install cable steps (2)
Provide and mount Standard Duty Multi-Jaw Rotating Vise, 5" Jaw Width, 5-1/4" Max. Opening, 3" Throat Depth
CARGO AREA COVER
Fabricate HD aluminum cover with slide open rear section and 2-piece hinged aluminum door to secure bed area.
Cover to be cab roof height.
CRANE
Mounted on right rear compartment top
800LB lifting capacity
4,500 FT LB moment rating
Winch uses a planetary gear drive
25’ x 3/16” galvanized aircraft cable
360 degree rotation with manual hand brake
Adjustable boom with 4 setting up to 75 degrees
Manual extension to 5 ¾ FT
12 ½ Ft remote pendant
Tie ring on compartment to secure cable/hook
WACH’S EQUIPMENT
Provide and mount Wachs machine model TM-7 transversly in front of cargo bed area extending thru side wall and into streetside front compartment
Fabricate custom removable treadplate aluminum enclosure for WACH’s machine and generator in cargo area
Provide POW-R-DRIVE 2 hydraulic drive handheld valve exerciser
Provide and install magnetically mounted, hand held LED light for illuminating in-ground valves
HYDRAULICS
PTO pump to operate WACH’s machine with valving to switch between machines and operate hammer
Provide one Stanley BR45 hydraulic breaker including 50’ of hydraulic line with quick disconnects installed
Provide and install one Fabco Power HYDRO 350CX-6 hydraulic generator
WARNING LIGHTS
2 rear mounted amber warning lights consisting of LED light heads with 6 high intensity diodes in each light, in line flasher, 19 flash patterns
Whelen 48" Full width AMBER LED Light Bar with 2 front facing LED, work lights, rear arrow directional function, low profile mount to front of bed cover
Wanco WLP90B5-LSA 30” X 60” Low Pro 90 Degree Tilt, 15 Light Sequential Arrow Pattern
File details come from the government source that posted it. Updated .