18-Attachment 18-2026 RAM 3500 with Compressor and Generator.pdf
PDF 161 KB Posted
- Attached to
- 2026 Fleet Purchase State and local contract opportunity
- Solicitation number
- 2026-016
- Issued by
- Allegheny County, Philadelphia City, Pennsylvania
About this file
This is a specification document for a Ram 3500 chassis vehicle with integrated compressor and generator equipment, prepared for Pittsburgh Water's 2026 Fleet Purchase in Pennsylvania. The vehicle is a new Ram 3500 with a regular cab 4X2 configuration, 143.5" wheelbase, and 60" cab-to-axle distance, equipped with municipal licensing and standard manufacturer features including a 6.4L gas engine, Aisin AS69RC automatic transmission, dual rear wheels, and backup camera with sensors.
The custom service body upfit includes a 108" long, 93" wide, 60" high compartment with LED lighting, compartmentalized storage with shelving rated for 250-pound capacity, water tank system with 50-foot reel, and specialized mounting systems for equipment including jackhammers, shoring posts, and hand tools. The vehicle features a full-width workbench and storage bumper with integrated vise mount, running boards, and conspicuity striping. The compressor and generator system consists of a Vanair Genair PTO shaft-driven unit delivering 160 CFM at 100/150 PSIG with an oil-flooded rotary screw design, paired with a 6.6 KW weatherproof generator. Additional features include a remote-mounted control panel with multiple 120V outlets and GFCI circuit breakers, air receiver tank with pressure relief and 25-micron filter, instrument panel with LCD display monitoring system hours and service intervals, DOT lighting including a telescopic LED light pole with 11,000 lumens and tripod light with 1000-watt quartz halogen bulb, and rear-mounted amber LED warning lights with multiple flash patterns and full-width Whelen light bar.
View the file
Other files for this state and local contract opportunity
Show all 19
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ATTACHMENT 18
RAM 3500 WITH COMPRESSOR AND GENERATOR
Line item #1-9: Ram 3500 with Compressor and Generator
Description: New Ram 3500 Chassis, Regular cab 4X2 143.5" WB and 60” CA
Minimum Specifications:
Municipal License plate
Standard Equipment per manufacturer
Ram 6.4L Gas
Aisin AS69RC automatic transmission with LH Side Mount PTO
Dual Rear wheels
Locking Differential
Rear fuel tanks only
Full size spare
White exterior
Vinyl Interior
Power Door Locks
Power Windows
Spare Key Set – (total of three)
Bluetooth for phone
Backup camera and sensors
Backup Alarm, 97 decibels
Safety Reflector Triangle Kit
Fire Extinguisher 2.5 LB Dry Chemical BC Rated
Front Factory Installed Mud Guards
Custom Service Body Upfit specifications:
DIMENSIONS
108” long, 93” wide, 60” high, 21” compartment depth
BODY OPTION
Compartment and cargo area LED lighting activated when doors are opened
Automatic timed shutoff for compartment lights
Bright treadplate aluminum on front of body and top of tailgate
Gang Locks - waterproof gang-locks for compartment doors with handles at rear. Installation is to prevent gang lock and handle from rotating. Gang locks are to be spring loaded to hold them in open position
UNDERSTRUCTURE
Install heatshield above exhaust
Front and rear crossmember 3/16” formed aluminum channel floor width
Full width 3/16” formed aluminum channel crossmember fore and aft of wheel house panel
(3) 6061 T6 aluminum extruded channel full length longitudinal reinforcements
FLOOR
3/16” aluminum treadplate
DOORS
1 ¼” double panel construction
16 GA 5052-H32 aluminum exterior and interior panels with full length hat section between panels
Nitrogen gas strut door holders
DOOR SEALS
5/8” bubble type seal
Die formed v-channels to direct water from compartments
DOOR HINGES
10GA zinc plated steel Hidden Hinge with ¼” stainless steel pins at pivot points
LATCHES
Stainless steel rotary locks
No exposed fasteners
Double bitted lock cylinders
Adjustable strikers
BODY CONSTRUCTION
12GA 5052-H32 aluminum
SLAM ACTION TAILGATE
Double panel with 12GA inner and outer panels with stainless lock rods, hinges and striker channels
Stainless steel removable knee braces
CAB SCREEN 1/8” perforated aluminum panel between compartments to protect rear cab glass
COOLING FAN
Protective barrier for the cooling fans
Mounted passenger side
SHELVING 18ga. Galvanized slotted for dividers. Full depth shelf hangers. 250lb capacity
Provide three shelves in the curbside horizontal compartment
(2) 8” conduit tubes for sign storage right side of cargo area
Slotted open storage for plywood sheets left side of cargo area
Install step ladder brackets on the top of the right side compartment, elevated to provide clearance for mud
Provide and install a slide and lock system for supplied gas-powered tamper, front right of bed
Furnish and install aluminum tool mounting system with adjustable fixtures for hand tools with room for expansion on left side of cargo area
Install stainless steel grab handle on the street side rear of body
Custom fabricate a mounting system for the shoring post on the top left side compartment
WATER TANK SYSTEM Fabricate an elevated shelf and provide a fastening system to hold supplied water tank with detachable hose and electrical connections. Furnish and install a 3/8” X 50’ water reel on the compartment top, wire an on/off switch in the driver side front compartment for the 12 volt pump.
Furnish and install a 30’ 12/3 conductor with a single 110v electrical outlet cut the rear compartment and install weather proof door to the rear for access to the cord without opening the side door
HOSE REEL spring rewind 50ft x ¾’ located in rt rear compartment accessible through rear body panel
CURB KEY RACK (2) fabricated aluminum troughs mounted in right side cargo area.
Right rear compartment floor reinforced and fitted with 2 swivel mounts for jackhammers and bit storage
Tool brackets installed to mount jackhammers (jackhammers will be made available during the build)
PRIMER 12 stage automotive electro-cathodic immersion prime paint system
POWDER COAT Polyester powder applied inside and out with high voltage spray and oven baked
UNDERCOATING Low VOC solvent based sound sealer
CAST ALUMINUM FUEL FILLER RECESS
Dry white polyester plastic powder applied with high voltage spray equipment, bake oven melts powder and fuses with primer
RUNNING BOARDS Install Extreme Duty open grate running boards
WORKBENCH/STORAGE BUMPER
Full width 12” deep storage bumper fabricated of .190 Ga aluminum with top opening lid with hasp and
Custom fabricate fold down step with locking centered on bumper
Reinforced for vice mount. Prime and paint white and apply full width conspicuity striping
Provide and mount Standard Duty Multi-Jaw Rotating Vise, 5" Jaw Width, 5-1/4" Max. Opening, 3" Throat Depth
COMPRESSOR/GENERATOR
Vanair Genair PTO shaft driven, 160 CFM / 100/150 PSIG Dual pressure compressor Max PSI 150
Oil flooded rotary screw design with rear mounted flange designed to have generator direct mounted
Genair 6.6 KW A/C generator
No belts, pulleys or tensioning devices
Generator to be a weatherproof Totally Enclosed Fan Cooled type
Install (2) shut off valves, one at the compressor and one at the hose reel
CONTROLS
Remote mount control panel
Single 120V system to include (1) 30 amp/120V GFCI circuit breaker, (2) 20 amp/120V circuit breakers and (1) 50amp/120V incoming circuit breaker
Unit to have (2) 20amp/120V GFCI 3 prong conventional outlets and (1) 30amp/120V 3 prong twist lock outlet
Unit to have (2) 20amp/120V GFCI 3 prong conventional outlets on rear of body
AIR RECEIVER
10.25” X 21.5” tank with pressure relief valve,fill cap and readable sight glass
25 micron full flow spin on replaceable filter with by-pass protection
INSTRUMENT PANEL AND SPEED CONTROL
I/O module receives sensor info and selects engine speed based on air demand
LCD Display module presents system hours, service intervals, air pressure, oil temp. and engine speed
DOT LIGHTING AND LED STOP/TAIL/TURN AND BACKUP LIGHTS
TELESCOPIC LIGHT (fixed mount)
Anodized aluminum side mount pushup pole with knurled twist lock mechanism
Pole shall rotate 360 degrees
Outer pole shall be grooved aluminum extrusion
Lamphead shall have four (4) ultra-bright white LEDs It shall operate at 12/24 volts DC, draw 7.5/3.75 amps, and generate 11,000 lumens Lamphead shall direct 50 percent of the light onto the action area while providing 50 percent to illuminate the working area
Powder coated white
TELESCOPING TRIPOD LIGHT with quick mount bracket
Air cushioned brake allows the pole to lower slowly to protect lighthead
Anti-chatter legs and wire guard lens protector
Lamphead shall have 1 quartz halogen 1000 watt 120 volt bulb with 22,000 lumens
Lamphead will have a polished reflector and 2 optimizing mirrors to produce a beam that lights an area 100 degree vertically and 150 degrees horizontally
COMPARTMENT LIGHTS flush mounted LED lights with switch in cab.
WARNING LIGHTS
2 rear mounted amber warning lights consisting of LED light heads with 6 high intensity diodes in each light, in line flasher, 19 flash patterns Whelen 48" Full width AMBER LED Light Bar with 2 front facing LED, work lights, rear arrow directional function, mount on the cab screen above the cab
File details come from the government source that posted it. Updated .