ATTACHMENT 9 - ATF GARAGE Simulator Building.pdf

This is an architectural floor plan for the Simulator Building at the ATF Training Academy located at Glynco. The building measures 50 feet in width and 30 feet in depth, with a total usable floor area of approximately 1,500 square feet. The layout depicts a single large open training space with provisions for mechanical, electrical, and plumbing systems.

Key features shown on the plan include: an overhead (O/H) door on the north wall for access; a 120V duplex receptacle and water station positioned on the east wall; floor and drain locations marked in red throughout the interior; four rows of six caged storage or utility boxes (representing 24 total units) arranged in a 2x3 grid pattern in the central area; LED exterior lights positioned at three locations (north, south, and one corner); an HVAC unit at the base of the structure; 5x5 concrete pads with exterior doors on both the west and east sides; and cabling or conduit runs marked along the perimeter. The plan is prepared for the ATF Training Academy at Glynco and includes standard architectural notation and dimensioning conventions.