7-Specifications Requirements Confirmation Form.pdf

This is a Specifications/Requirements Confirmation Form for RFQ 2026-0016 issued by the Savannah Airport Commission in Georgia for the procurement of one new, unused Pull-Behind Top Dresser. The equipment must be brand new, free of defects, and include all standard equipment, software, accessories, and infrastructure required for full operation as provided by the original equipment manufacturer. The unit must comply with all applicable State and Federal safety and emissions regulations and represent the latest model available with all standard equipment normally furnished by the manufacturer.

The Pull-Behind Top Dresser must meet the following minimum specifications: diesel engine with a heaped capacity of 3.2 cubic yards and maximum payload of 7,500 pounds; compatibility with wet/dry sand, compost, infill, and mixes; dual hydraulic controls for belt and attachment speed; self-aligning V-Track belt system; 11-gauge steel body construction; 14 psi tire options (41-18LL-16.1 6-ply turf); spread width up to 35 feet with required Saber Tooth Beater and Spinner attachments. The unit must include a manufacturer warranty and four keys per unit with FOBs if applicable. Bidders are required to confirm compliance with each specification by placing a checkmark next to applicable requirements and must note any exceptions on a designated Exceptions Sheet, with a complete copy of specifications included in the bid response submitted through Bonfire.