Amendment A004.pdf

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing items 8 and 15, and returning or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

E. IMPORTANT: Contractor is not is required to sign this document and return copies to the issuing office.

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

3. EFFECTIVE DATE 4. REQUISITION/PURCHASE REQUISITION NUMBER

7. ADMINISTERED BY (If other than Item 6) CODE

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

FACILITY CODE

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended.

12. ACCOUNTING AND APPROPRIATION DATA (If required) copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

CHECK ONE A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER

NUMBER IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15C. DATE SIGNED

15A. NAME AND TITLE OF SIGNER (Type or print)

16C. DATE SIGNED

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

PAGE OF PAGES

6. ISSUED BY CODE

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) (X)

CODE

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

16B. UNITED STATES OF AMERICA

(Signature of Contracting Officer)

Previous edition unusable

2. AMENDMENT/MODIFICATION NUMBER

*FAILURE TO ACKNOWLEDGE THIS AMENDMENT IN BLOCK 19 OF THE SF 1442 BY THE DESIGNATED DATE AND HOUR SPECIFIED IN THE SOLICITATION MAY RESULT IN REJECTION OF YOUR BID (REFER TO ITEM 11.)

FEDERAL HIGHWAY ADMINISTRATION

CENTRAL FEDERAL LANDS HIGHWAY DIVISION

12300 WEST DAKOTA AVENUE, SUITE 360

LAKEWOOD, COLORADO 80228

ATTENTION:

9A. AMENDMENT OF SOLICITATION NUMBER

5. PROJECT NUMBER (If applicable)

9B. DATED (SEE ITEM 11)

0*

*See Item 14

"General Decision Number: NV20260002 06/01/2026

State: Nevada

Construction Types: Building, Heavy and Highway

Counties: Nevada Counties of Clark, Lincoln and Nye

Department of Energy-Nevada National Security Site (NNSS). The Nevada National Security Sites, shall include work performed at the Nevada National Security Site (NNSS, formerly the Nevada Test Site), Remote Sensing Lab-Nellis (RSL-N), North Las Vegas Facility (NLV), Nevada Test and Training Range (NTTR), and other facilities under the cognizance of the Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office (NNSA/NFO), located within the State of Nevada

Modification Number Publication Date 1 01/30/2026 2 05/18/2026 3 06/01/2026

ASBE0135-004 10/01/2025

Rates Fringes

ASBESTOS/INSULATOR WORKER: MECHANIC (ZONE PAY

(0-19 MILES, LAS VEGAS): $0.00 ZONE PAY (20-45

MILES): $4.00 ZONE PAY (46-75 MILES, MERCURY):

$5.00 ZONE PAY (76-150 MILES, FORWARD AREAS):

$7.00 ZONE PAY (150+ MILES, NTTR): $8.00)..........$ 67.19 19.88

BOIL0092-006 10/01/2024

Rates Fringes

BOILERMAKER: BLACKSMITH ZONE PAY (ZONE A - LAS

VEGAS $0.00 ZONE B - MERCURY & FORWARD AREAS

$2.00 ZONE C - NTTR $2.50).........................$ 44.31 28.96

BRNV0013-003 10/01/2025

Rates Fringes

TILE FINISHER (ZONE PAY: ZONE 1: FREE ZONE 0-40

MILES $0.00 ZONE 2: 41-50 MILES - $3.75 ZONE 3:

51-70 MILES - $5.00 ZONE 4: OVER 71 MILES -

$10.00).............................................$ 37.07 14.74

TILE SETTER (ZONE PAY: ZONE 1: FREE ZONE 0-40

MILES $0.00 ZONE 2: 41-50 MILES - $3.75 ZONE 3:

51-70 MILES - $5.00 ZONE 4: OVER 71 MILES -

$10.00).............................................$ 49.74 18.79

TERRAZZO WORKER/SETTER (ZONE PAY: ZONE 1: FREE

ZONE 0-40 MILES $0.00 ZONE 2: 41-50 MILES - $3.75

ZONE 3: 51-70 MILES - $5.00 ZONE 4: OVER 71 MILES

- $10.00)...........................................$ 52.44 18.79

MARBLE SETTER (ZONE PAY: ZONE 1: FREE ZONE 0-40

MILES $0.00 ZONE 2: 41-50 MILES - $3.75 ZONE 3:

51-70 MILES - $5.00 ZONE 4: OVER 71 MILES -

$10.00).............................................$ 52.44 18.79

CAULKER (ZONE PAY: ZONE 1: FREE ZONE 0-40 MILES

D-1 AMENDMENT A004 06.03.2026

$0.00 ZONE 2: 41-50 MILES - $3.75 ZONE 3: 51-70

MILES - $5.00 ZONE 4: OVER 71 MILES - $10.00)......$ 52.79 20.89

BRICKLAYER (ZONE PAY: ZONE 1: FREE ZONE 0-40 MILES

$0.00 ZONE 2: 41-50 MILES - $3.75 ZONE 3: 51-70

MILES - $5.00 ZONE 4: OVER 71 MILES - $10.00)......$ 52.79 20.89

CARP1607-006 10/01/2025

Rates Fringes

MILLWRIGHT (ZONE PAY: ZONE A: LAS VEGAS- FREE ZONE

ZONE B: MERCURY, FORWARD & NTTR AREAS-$4.25).......$ 54.16 27.84

CARP1977-007 10/01/2025

Rates Fringes

CARPENTER (ZONE PAY: ZONE A: LAS VEGAS - FREE ZONE

ZONE B: MERCURY, FORWARD & NTTR AREAS - $4.25).....$ 52.12 28.08

ELEC0357-005 10/01/2025

Rates Fringes

ELECTRICIAN: CABLE SPLICER (ZONE PAY ZONE A: 1-25

MILES - $0.00 ZONE B: 25-55 MILES - $7.00 ZONE C:

OVER 55 MILES NNSS - $7.00 ZONE D: NTTR - $7.50)...$ 61.22 28.70

ELECTRICIAN: COMMUNICATION TECHNICIAN ONLY (ZONE

PAY ZONE A: 1-25 MILES - $0.00 ZONE B: 25-55

MILES - $7.00 ZONE C: OVER 55 MILES NNSS - $7.00

ZONE D: NTTR - $7.50)...............................$ 64.37 28.81

ELECTRICIAN (ZONE PAY ZONE A: 1-25 MILES - $0.00

ZONE B: 25-55 MILES - $7.00 ZONE C: OVER 55 MILES

NNSS - $7.00 ZONE D: NTTR - $7.50).................$ 64.37 28.81

ELEC0396-004 10/01/2025

Rates Fringes

LINE CONSTRUCTION: LINEMAN (ZONE PAY -NNSS $5.00;

NTTR $5.00).........................................$ 62.08 31.99

LINE CONSTRUCTION: HEAVY EQUIPMENT OPERATOR (ZONE

PAY -NNSS $5.00; NTTR $5.00)........................$ 62.08 31.99

LINE CONSTRUCTION: GROUNDMAN (ZONE PAY -NNSS $5.00;

NTTR $5.00).........................................$ 49.66 31.50

ELEV0018-003 01/01/2025

Rates Fringes

ELEVATOR MACHANIC (ZONE PAY: ZONE A- LAS VEGAS.

ZONE B-MERCURY $2.00. ZONE C- NTTR $2.50. FOOTNOTE:

ADDITIONAL FRINGE BENEFITS TO BE PAID A: PAID

VACATION: EMPLOYER CONTRIBUTES 8% OF REGULAR HOURLY

RATE AS VACATION PAY CREDIT FOR EMPLOYEES WITH MORE

THAN 5 YEARS OF SERVICE, AND 6% FOR 0 MONTHS TO 5

YEARS OF SERVICE. B: PAID HOLIDAYS: NEW YEAR'S DAY,

MEMORIAL DAY, INDEPENDENCE DAY, LABOR DAY, VETERANS

DAY, THANKSGIVING DAY, FRIDAY AFTER THANKSGIVING,

AND CHRISTMAS DAY.).................................$ 69.43 38.44

ENGI0012-023 10/01/2025

Rates Fringes

POWER EQUIPMENT OPERATOR GROUP 9 COMBINATION HEAVY

DUTY REPAIRMAN AND WELDER; RUBBER-TIRED ANYTANDEM,

MULTIPLE ENGINE EARTH-MOVING EQUIPMENT OPERATOR.

(ZONE PAY ZONE B (REPORT TO NNSS) - $4.50 ZONE C

(REPORT TO NTTR) - $4.50)...........................$ 58.74 34.00

POWER EQUIPMENT OPERATOR GROUP 8 EXCAVATOR/TRACKHOE

D-2 AMENDMENT A004 06.03.2026

OR SIMILAR. (ZONE PAY ZONE B (REPORT TO NNSS) -

$4.50 ZONE C (REPORT TO NTTR) - $4.50).............$ 58.92 34.00

POWER EQUIPMENT OPERATOR GROUP 7 HEAVY DUTY

REPAIRMAN; HEAVY DUTY WELDER; LIGHT DUTY REPAIRMAN

(HYBRID/ALL ELECTRIC). (ZONE PAY ZONE B (REPORT

TO NNSS) - $4.50 ZONE C (REPORT TO NTTR) - $4.50)..$ 57.99 34.00

POWER EQUIPMENT OPERATOR GROUP 6 BATCH PLANT

OPERATOR; BULK PLANT OPERATOR; CONCRETE MIXER

OPERATOR (PAVING); CONCRETE MOBILE MIXER OPERATOR;

CONCRETE PUMP OR PUMPCRETE GUN OPERATOR; CRUSHING

PLANT ENGINEER; DANDY DIGGER; DRILLER

(ROTATRY/CORE); ELEVATING GRADE OPERATOR; FORKLIFT

OPERATOR (OVER 5 TIMES); GRADE-ALL OPERATOR;

HIGHLINE CABLEWAY OPERATOR; HOIST OPERATOR; JUMBO

PIPE CARRIER; KOLMAN BELT LOADER, AND SIMILAR TYPE;

LIFT SLAB MACHINE OPERATOR; LOADER OPERATOR;

MACHINIST OPERATOR; MICRO TUNNEL SYSTEM (BELOW

GROUND); MOTOR PATROL OPERATOR (ANY TYPE OR SIZE);

OZZIE PADDER (OR SIMILAR TYPE); PNEUMATIC CONCRETE

PLACING MACHINE OPERATOR (OR SIMILAR TYPE);

PNEUMATIC PIPE RAMMING TOOL (AND SIMILAR TYPES);

ROTOMIL OPERATOR; SEWER PLANT OPERATOR; SHOVEL,

CRANE, BACKHOE, DRAGLINE, CLAMSHELL; DERRICK,

DERRICK BARGE, PILE DRIVER, AND MUCKING MACHINE

OPERATOR; SHUTTLE BUGGY; SKIPLOADER (WHEEL TYPE

OVER 1 1/2 YARDS); SURFACE HEATER AND PLANER

OPERATOR; TRACTOR LOADER OPERATOR, (CRAWLER TYPE-

ALL TYPES AND SIZES); TRACTOR OPERATOR (WITH BOOM

ATTACHMENTS); TRAVELING PIPE WRAPPING, CLEANING AND

BENDING MACHINE OPERATOR; TRENCHING MACHINE

OPERATOR (OVER 6-FT DEPTH); TUNNEL BORING MACHINE;

WATER PULL (COMPACTION); WATER WELL DRILLER. (ZONE

PAY ZONE B (REPORT TO NNSS) - $4.50 ZONE C

(REPORT TO NTTR) - $4.50)...........................$ 57.74 34.00

POWER EQUIPMENT OPERATOR GROUP 5 ASPHALT OR

CONCRETE SPREADING MECHANICAL TAMPING OR FINISHING

MACHINE OPERATOR-ROLLER (ALL TYPES AND SIZES), SOIL

CEMENT, ASPHALT FINISH; ASPHALT PLANT ENGINEER;

DECK ENGINE OPERATOOR; GRADE CHECKER;

PAVEMENT-BREAKER OPERATOR; PNEUMATIC HEADING

SHIELD- TUNNEL; ROAD OIL MIXING MACHINE OPEREATOR;

FORKLIFT (UNDER (5) TONS); RUBBER TIRED, HEAVY DUTY

EQUIPMENT OPERATOR; SKIPLOADER (WHEELTYPE, OVER 3-4

YARDS); SLIP FORM PUMP OPERATOR; TRACKOR OPERATOR,

DRAG-TYPE SHOVEL, BULLDOZER, TAMPER, SCRAPER, AND

PUSH TRACTOR. (ZONE PAY ZONE B (REPORT TO NNSS) -

$4.50 ZONE C (REPORT TO NTTR) - $4.50).............$ 57.62 34.00

POWER EQUIPMENT OPERATOR GROUP 4 ASPHALT PLANT

FIREMAN; BORING MACHINE OPERATOR; BORING SYSTEMS

ELECTRONIC TRACKING LOCATOR; BOXMAN OR MIXER BOX

OPERATOR (CONCRETE OR ASPHALT PLANT); FISHING TOOL

ENGINEER; HIGHLINE CABLEWAY SIGNALMAN; HORIZONTAL

DIRECTIONAL DRILLING MACHINE; INSTRUMENTMAN;

LOCOMOTIVE ENGINEER; MICO-TUNNELING (ABOVE GROUND

TUNNEL); MINI EXCAVATOR OPERATOR; MUD PLANT

OPERATOR; POWER SWEEPER OPERATOR; ROLLER OPERATOR

(COMPACTING); SCREED OPERATOR; SEEDER; TRENCHING

MACHINE OPERATOR, VACCUM TRUCK. (ZONE PAY ZONE B

(REPORT TO NNSS) - $4.50 ZONE C (REPORT TO NTTR) -

$4.50)..............................................$ 56.52 34.00

POWER EQUIPMENT OPERATOR GROUP 3 A-FRAME OR WINCH

TRUCK OPERATOR; BOBCAT OR SIMILAR TYPE (SKIDSTEER);

DERRICKMAN (ROTARY AND CORE); DINKY LOCOMOTIVE OR

TUNNEL MOTOR OPERATOR; ELEVATOR HOIST OPERATOR;

EQUIPMENT GREASER; FORD, FERGUSON OR SIMILAR TYPE

D-3 AMENDMENT A004 06.03.2026

(WITH DRAG-TYPE ATTACHMENTS); HYDRA-HAMMER OR

SIMILAR TYPE EQUIPMENT; MATERIAL HOIST/OUTSIDE

MANLIFT OPERATOR; POWER CONCRETE CURING MACHINE;

PPOWER CONCRETE SAW OPERATOR (OR SIMILAR TYPE);

POWER DRIVEN JUMBO FORM SETTER OPERATOR; RODMAN &

CHAINMAN; ROSS CARRIER OPERATOR; SELF-CLIMBING

SCAFFOLD (OR SIMILAR TYPE); SELF-PROPELLED TAR

PIPELINING MACHINE OPERATOR; STATIONARY PIPE

WRAPPING AND CLEANING MACHINE OPERATOR; STEAM AND

WATER PLANT OPERATOR; TOWBLADE OPERATOR. (ZONE PAY

ZONE B (REPORT TO NNSS) - $4.50 ZONE C (REPORT TO

NTTR) - $4.50)......................................$ 55.03 34.00

POWER EQUIPMENT OPERATOR GROUP 2 CONCRETE MIXER

OPERATOR (SKID TYPE); CONVEYOR AND BELTMAN;

FIREMAN; GENERATOR PUMP OR COMPRESSOR OPERATOR;

GENERATOR, PUMP OR COMPRESSOR PLANT OPERATOR;

HYDROSTATIC PUMP MOTORMAN (ROTARY AND CORE); PJU

SIDEDUMP JACK; SCREENING AND CONVEYOR MACHINE

(SIMILAR TYPE); SKIPLOADER (WHEELTYPE, FORD,

FERGUSON, JEEP OR SIMILAR TYPE, 3/4 YARDS OR LESS,

WITHOUT DRAG-TYPE ATTACHMENTS); TEMPORARY HEATING

PLANT OPERATOR; TRUCK CRANE OILER. (ZONE PAY ZONE

B (REPORT TO NNSS) - $4.50 ZONE C (REPORT TO NTTR)

- $4.50)............................................$ 54.74 34.00

POWER EQUIPMENT OPERATOR GROUP 1 AIR COMPRESSOR,

PUMP OR GENERATOR OPERATOR; BLADE OPERATOR,

ENGINEER-OILER AND SIGNALMAN; RAIL MOUNTED JLG;

ROTARY DRILL TENDER (ROTARY AND CORE); STEAM

CLEANER/PRESSURE WASHER; SWITCHMAN OR BRAKEMAN.

(ZONE PAY ZONE B (REPORT TO NNSS) - $4.50 ZONE C

(REPORT TO NTTR) - $4.50)...........................$ 53.79 34.00

IRON0118-014 10/01/2025

Rates Fringes

IRONWORKER (ZONE PAY- NNSS $5.50; NTTR $5.50).......$ 55.06 37.26

LABO0872-009 10/01/2025

Rates Fringes

LABORER GROUP 3 ASBESTOS ABATEMENT; HAZARDOUS

WASTE; LEAD ABATEMENT; MICROBIAL REMEDIATION WHICH

INCLUDES HANTAVIRUS; PETROCHEMICAL HANDLER;

RADIATION WORKER. (ZONE PAY: MERCURY, FORWARD

AREAS & NTTR $5.00 FOOT NOTE: SAVINGS ACCOUNT OF

$5.55 SHOULD BE ADDED TO THE BASE RATE).............$ 41.57 27.22

LABORER GROUP 2 ASPHALT RAKER, IRONER, SPREADER;

BUGGYMOBILE MAN; CEMENT DUMPER; CONCRETE CORE

CUTTER, SAWMAN AND CEMENT GRINDING OPERATOR;

CONCRETE CURER; CRIBBER OR SHORER; CUTTING TORCH

OPERATOR (DEMOLITION); DRILLER; DRY PACKING

CONCRETE & FILLING OF FORM BOLT HOLES; GAS & OIL

PIPELINE WRAPPER; HEAD ROCK SLINGER; JACKHAMMER,

DRILLER AND/OR PAVEMENT BREAKER; LAYING OF ALL

NONMETALLIC PIPE, INCLUDING SEWER PIPE, DRAIN PIPE

AND UNDERGROUND TILE; MACHINE TOOL OPERATOR

(OPERATORS AND TENDERS OF PNEUMATIC & ELECTRIC

TOOLS, VIBRATING MACHINES AND SIMILAR MECHANICAL

TOOLS NOT SEPARATELY CLASSIFIED HEREIN, INCLUDING

HAND GUIDED DITCH WITCH AND HAND-TYPE ROLLER);

PAVING, AIRPORT RUNWAYS & SIMILAR WORK; PESTICIDE,

HERBICIDE, INSECTICIDE APPLICATOR; POTHOLER;

POWDERMAN; ROCK SLINGER; SANDBLASTER (NOZZLEMAN);

SANDBLASTER (POT TENDER); SHOTCRETE (NOZZLEMAN);

SHOTCRETE (POT TENDER); STEEL HEADERBOARD MAN.

D-4 AMENDMENT A004 06.03.2026

(ZONE PAY: MERCURY, FORWARD AREAS & NTTR $5.00

FOOT NOTE: SAVINGS ACCOUNT OF $5.55 SHOULD BE

ADDED TO THE BASE RATE).............................$ 41.39 27.22

LABORER GROUP 1 BUILDING/OFFICE CLEANUP: CESSPOOL

DIGGER & INSTALLER; DRINKING WATER; FENCE BUILDER;

FINE GRADER, HIGHWAY & STREET; FLAGPERSON; GAS &

OIL PIPELINE LABORER; GAS & OIL PIPELINE WRAPPER -

POT TENDER AND FORM MAN; GUINEA CHASER; PACKING ROD

STEEL AND PLANS; GENERAL (CONSTRUCTION CLEANUP);

DEMOLITION; LANDSCAPE GARDENER, NURSERYMAN AND

GROUNDS KEEPER; MAKING & CAULKING OF ALL

NONMETALLIC PIPE JOINTS; RIP RAP STONE PAVER;

ROTO-SCRAPER; SCALER; SEPTIC TANK DIGGER &

INSTALLER (LEADMAN); TANK SCALER AND CLEANER; TOOL

ATTENDANT (JOBSITE ONLY); TREE CLIMBER, FALLER,

CHAIN SAW OPERATOR, PITTSBURGH CHIPPER AND SIMILAR

TYPE OF BRUSH SHEDDERS; WINDOW CLEANER (ZONE PAY:

MERCURY, FORWARD AREAS & NTTR $5.00 FOOT NOTE:

SAVINGS ACCOUNT OF $5.55 SHOULD BE ADDED TO THE

BASE RATE)..........................................$ 41.13 27.22

LABO0872-010 10/01/2025

Rates Fringes

LABORER: BULLGANG, MUCKER, TRACKMAN (ZONE PAY:

MERCURY, FORWARD AREAS & NTTR $5.00 FOOT NOTE:

SAVINGS ACCOUNT OF $4.22 SHOULD BE ADDED TO THE

BASE RATE)..........................................$ 46.44 27.27

LABORER: MINER-TUNNEL HARDROCK (ZONE PAY: MERCURY,

FORWARD AREAS & NTTR $5.00 FOOT NOTE: SAVINGS

ACCOUNT OF $4.22 SHOULD BE ADDED TO THE BASE RATE)..$ 46.69 27.27

LABORER: SHAFT, RAISE, STOPE MINER (ZONE PAY:

MERCURY, FORWARD AREAS & NTTR $5.00 FOOT NOTE:

SAVINGS ACCOUNT OF $4.22 SHOULD BE ADDED TO THE

BASE RATE)..........................................$ 47.69 27.27

PAIN0159-002 10/01/2025

Rates Fringes

PAINTER: FLOORCOVERER, CARPET, LINOLEUM AND TILE

GLAZIER (ZONE PAY- NNSS $5.00; NTTR $5.00)..........$ 52.40 24.18

PAINTER (ZONE PAY- NNSS $5.00; NTTR $5.00).........$ 51.79 24.18

PAINTER, SPRAY AND PAPERHANGER SIGN (ZONE PAY- NNSS

$5.00; NTTR $5.00)..................................$ 52.14 24.18

PAINTER, TAPER, FLUSHER AND DETAILER (ZONE PAY-

NNSS $5.00; NTTR $5.00).............................$ 52.14 24.18

PLAS0797-004 10/01/2024

Rates Fringes

PLASTERER (ZONE PAY ZONE A - LAS VEGAS - NO PAY

ZONE ZONE B - MERCURY AND FORWARD AREAS-$5.00

ZONE C - NTTR-$5.50)................................$ 42.03 28.05

CEMENT MASON (ZONE PAY ZONE A - LAS VEGAS - NO

PAY ZONE ZONE B - MERCURY AND FORWARD AREAS-$5.00

ZONE C - NTTR-$5.50)................................$ 43.27 29.66

PLAS0797-004 10/01/2025

Rates Fringes

PLASTERER (ZONE PAY ZONE A - LAS VEGAS - NO PAY

ZONE ZONE B - MERCURY AND FORWARD AREAS-$5.00

ZONE C - NTTR-$5.50)................................$ 42.03 28.05

CEMENT MASON (ZONE PAY ZONE A - LAS VEGAS - NO

PAY ZONE ZONE B - MERCURY AND FORWARD AREAS-$5.00

D-5 AMENDMENT A004 06.03.2026

ZONE C - NTTR-$5.50)................................$ 43.27 29.66

PLUM0525-007 10/01/2025

Rates Fringes

PIPEFITTER: INCLUDING INERT GAS WELDER (ZONE PAY:

MERCURY $7.50; FORWARD AREAS $11.25; NTTR $11.25)...$ 62.85 26.75

PLUMBER: INCLUDLING LEAD BURNER (ZONE PAY: MERCURY

$7.50; FORWARD AREAS $11.25; NTTR $11.25)...........$ 62.85 26.75

REFRIGERATION MECHANIC (ZONE PAY: MERCURY $7.50;

FORWARD AREAS $11.25; NTTR $11.25)..................$ 62.85 26.75

ROOF0162-003 10/01/2025

Rates Fringes

ROOFER (INCLUDING WATERPROOFING)....................$ 39.74 12.42

SFNV0669-003 10/01/2025

Rates Fringes

SPRINKLER FITTER ZONE PAY ZONE A: LAS VEGAS -

$0.00 ZONE B: NNSS - $4.50 ZONE C: NTTR - $4.50...$ 56.69 28.62

SHEE0088-003 10/01/2025

Rates Fringes

SHEET METAL WORKER (ZONE PAY: NNSS $5.50; NTTR

$5.50)..............................................$ 66.73 30.01

TEAM0631-007 10/01/2025

Rates Fringes

TRUCK DRIVER, GROUP 5 TIREMAN (ZONE PAY ZONE 1:

$2.00 1-20 MILES ZONE 2: $2.50 20-40 MILES ZONE

3: $3.50 40-60 MILES ZONE 4: $6.00 OVER 60 MILES)..$ 44.26 28.37

TRUCK DRIVER, GROUP 4 BOOTMAN, OFF-ROAD AND SPECIAL

EQUIPMENT DRIVER (ZONE PAY ZONE 1: $2.00 1-20

MILES ZONE 2: $2.50 20-40 MILES ZONE 3: $3.50

40-60 MILES ZONE 4: $6.00 OVER 60 MILES)...........$ 44.78 28.37

TRUCK DRIVER, GROUP 3 EXTRA HEAVY DUTY DRIVER,

FORKLIFT DRIVER (OVER 15 TONS). (ZONE PAY ZONE 1:

$2.00 1-20 MILES ZONE 2: $2.50 20-40 MILES ZONE

3: $3.50 40-60 MILES ZONE 4: $6.00 OVER 60 MILES)..$ 44.06 28.37

TRUCK DRIVER, GROUP 2 EQUIPMENT PARTS CLERK, FLEET

OPERATIONS DISPATCHER, FORKLIFT DRIVER (UNDER 15

TONS), HEAVY DUTY DRIVER, WAREHOUSEMAN. (ZONE PAY

ZONE 1: $2.00 1-20 MILES ZONE 2: $2.50 20-40 MILES

ZONE 3: $3.50 40-60 MILES ZONE 4: $6.00 OVER 60

MILES)..............................................$ 43.86 28.37

TRUCK DRIVER, GROUP 1 LIGHT DUTY DRIVER, LIGHT

VEHICLE DISPATCHER, TRUCK GREASER. (ZONE PAY ZONE

1: $2.00 1-20 MILES ZONE 2: $2.50 20-40 MILES

ZONE 3: $3.50 40-60 MILES ZONE 4: $6.00 OVER 60

MILES)..............................................$ 43.69 28.37

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide

D-6 AMENDMENT A004 06.03.2026

employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Note: Executive Order 13658 generally applies to contracts subject to the Davis-Bacon Act that were awarded on or between January 1, 2015 and January 29, 2022, and that have not been renewed or extended on or after January 30, 2022. Executive Order 13658 does not apply to contracts subject only to the Davis-Bacon Related Acts regardless of when they were awarded. If a contract is subject to Executive Order 13658, the contractor must pay all covered workers at least $13.65 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract from May 11, 2026, through December 31, 2026. The applicable Executive Order minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under Executive Order 13658 is available at www.dol.gov/whd/govcontracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (iii)).

The body of each wage determination lists the classifications and wage rates that have been found to be prevailing for the type(s) of construction and geographic area covered by the wage determination. The classifications are listed in alphabetical order under rate identifiers indicating whether the particular rate is a union rate (current union negotiated rate), a survey rate, a weighted union average rate, a state adopted rate, or a supplemental classification rate.

Union Rate Identifiers

A four-letter identifier beginning with characters other than �SU�, �UAVG�, �SA�, or �SC� denotes that a union rate was prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2024. PLUM is an identifier of the union whose collectively bargained rate prevailed in the survey for this classification, which in this example would be Plumbers.

0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. The date, 07/01/2024 in the example, is the effective date of the most current negotiated rate.

Union prevailing wage rates are updated to reflect all changes over time that are reported to WHD in the rates in the collective bargaining agreement (CBA) governing the classification.

Union Average Rate Identifiers

The UAVG identifier indicates that no single rate prevailed for

D-7 AMENDMENT A004 06.03.2026

those classifications, but that 100% of the data reported for the classifications reflected union rates. EXAMPLE:

UAVG-OH-0010 01/01/2024. UAVG indicates that the rate is a weighted union average rate. OH indicates the State of Ohio.

The next number, 0010 in the example, is an internal number used in producing the wage determination. The date, 01/01/2024 in the example, indicates the date the wage determination was updated to reflect the most current union average rate.

A UAVG rate will be updated once a year, usually in January, to reflect a weighted average of the current rates in the collective bargaining agreements on which the rate is based.

Survey Rate Identifiers

The �SU� identifier indicates that either a single non-union rate prevailed (as defined in 29 CFR 1.2) for this classification in the survey or that the rate was derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As a weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SUFL2022-007 6/27/2024. SU indicates the rate is a single non-union prevailing rate or a weighted average of survey data for that classification. FL indicates the State of Florida. 2022 is the year of the survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. The date, 6/27/2024 in the example, indicates the survey completion date for the classifications and rates under that identifier.

�SU� wage rates typically remain in effect until a new survey is conducted. However, the Wage and Hour Division (WHD) has the discretion to update such rates under 29 CFR 1.6(c)(1).

State Adopted Rate Identifiers

The �SA� identifier indicates that the classifications and prevailing wage rates set by a state (or local) government were adopted under 29 C.F.R 1.3(g)-(h). Example: SAME2023-007 01/03/2024. SA reflects that the rates are state adopted. ME refers to the State of Maine. 2023 is the year during which the state completed the survey on which the listed classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination.

The date, 01/03/2024 in the example, reflects the date on which the classifications and rates under the �SA� identifier took effect under state law in the state from which the rates were adopted.

WAGE DETERMINATION APPEALS PROCESS

1) Has there been an initial decision in the matter? This can be:

a) a survey underlying a wage determination

b) an existing published wage determination

c) an initial WHD letter setting forth a position on a wage determination matter

d) an initial conformance (additional classification and rate) determination On survey related matters, initial contact, including requests for summaries of surveys, should be directed to the WHD Branch of Wage Surveys. Requests can be submitted via email to davisbaconinfo@dol.gov or by mail to:

Branch of Wage Surveys Wage and Hour Division

D-8 AMENDMENT A004 06.03.2026

U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

Regarding any other wage determination matter such as conformance decisions, requests for initial decisions should be directed to the WHD Branch of Construction Wage Determinations.

Requests can be submitted via email to BCWD-Office@dol.gov or by mail to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2) If an initial decision has been issued, then any interested party (those affected by the action) that disagrees with the decision can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7).

Requests for review and reconsideration can be submitted via email to dba.reconsideration@dol.gov or by mail to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210.

END OF GENERAL DECISION

D-9 AMENDMENT A004 06.03.2026

E-46

Section 401. — ASPHALT CONCRETE PAVEMENT

BY GYRATORY MIX DESIGN METHOD

Description

401.01 Delete the second paragraph and substitute the following:

Asphalt concrete pavement nominal maximum size aggregate is designated according to Tables 401-1 and 703-4. Equivalent single axle loads (ESAL) or number of gyrations at design (NDesign) is designated according to Table 401-1.

Delete the fifth paragraph and substitute the following:

Antistrip additive type is designated according to Subsection 702.05. Use a minimum of 1 percent Type 3 (lime) in the asphalt concrete mixture.

Add the following:

Pavement roughness is type III-A, and IV as shown in Subsection 401.16.

Pavement roughness is type I-A and IV from Station 303+60 to 564+00 as shown in Subsection

401.16. Other station ranges, the pavement roughness is type III-A, and IV as shown in Subsection 401.16.

Asphalt binder grade is PG 70-16. The Pressure Aging Vessel test temperature shall be 212°F (100°C).

Construction Requirements

401.03 Composition of Mix (Job-Mix Formula). Add the following after the first paragraph:

Compact specimens with the gyratory effort corresponding to the design ESAL level of 0.3 to <3 million. Use a gyratory compactor which meets the internal angle requirement according to

AASHTO T 312.

If more than 1.0 percent hydrated lime is proposed in the JMF, provide AASHTO T 283 test results showing the additional lime is necessary to meet the minimum tensile strength ratio requirements in Table 401-1.

(c) Submission

(1) Aggregate and mineral filler.

(a) Target values: Delete line (2) and substitute the following:

(2) Designate target values within the gradation band specified for the nominal maximum size aggregate grading shown in Table 703-4. Allowable deviations

AMENDMENT A004 06.03.2026

denise.martinez Cross-Out

IFB: Remove and replace all D pages with General Decision Number: NV20260002 06/01/2026.

SCR's: Remove and replace sheet E-46.