Q_A 16-jun-22.pdf
PDF 99 KB Posted
- Attached to
- WA KITTITAS 5880(1)DICKEY CRK BRIDGE Federal contract opportunity
- Solicitation number
- 69056722B000006
About this file
This document contains answers to six technical questions regarding Federal Highway Administration Solicitation Number 69056722B000006 to replace the Dickey Creek bridge in Kittitas County, Washington. The project involves replacing the existing bridge with a wider and longer structure to safely accommodate all vehicles, bicyclists, and pedestrians while reducing flood impacts and restoring natural river processes. Question topics addressed include the acceptability of oversized drilled shafts with rock sockets, using permanent casing thicker than 4 inches, utilizing spiral weld pipe for permanent casing, and the type of rolled erosion control blanket required. Bidders are advised the interested vendors list on SAM.gov is the only bidders list available for this project and Western Federal Lands Highways Division does not maintain plan holders lists.
View the file
Other files for this federal contract opportunity
Show all 30
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Project No. WA KITTITAS 5880(1)
Project : Dickey Creek Bridge
# General Technical Question Answer Date
1 X
Since these shafts have rock sockets, is it acceptable to drill an oversized shaft to facilitate the installation of the full depth permanent casing?
yes 9‐Jun‐22
2 X Is it acceptable to use permanent casing that is thicker than ¼” thick?
will be addressed under Amendment A001 9‐Jun‐22
3 X Can spiral weld pipe be used for the permanent casing?
will be addressed under Amendment A001 9‐Jun‐22
4 X
Could you please tell me if there is just one type of rolled erosion control blanket needed?
The plans do not detail two separate types but the SCRs talk about an inner and an outer COIR fabric.
In accordance with Subsection 629.02, all materials listed under Subsection 713.17
(FP‐14 & SCRs) are acceptable products for the work performed under Section 629.
16‐Jun‐22
5 X
I’ve been trying to find a bidders list for this project so I can see which general contractors are bidding. Is the interested vendors list on the sam.gov website
(https://sam.gov/opp/7a05b2a1f08844c9a12da
52064dcbc79/view) the only bidders list available?
Western Federal Lands Highways Division does not maintain plan holders lists.
16‐Jun‐22
Check General or Technical
File details come from the government source that posted it. Updated .