47QSSC-26-Q-0124_T10_Attachment 3_ Commercial Item Description (CID) 7FXEDM.pdf

This is a Commercial Item Description (CID) for matting, rubber and vinyl, authorized by the General Services Administration for use by all federal agencies.

The CID covers rubber and vinyl matting used in hospitals, ships, laboratories, and buildings for general purposes. Matting shall be classified as one type made of rubber composition, rubber composition with one-ply cotton sheeting, or vinyl composition. Rubber matting must be manufactured from synthetic rubber or a mixture of synthetic and reclaimed rubber, with or without cotton sheeting; cotton sheeting used must be plain woven. Vinyl matting shall be compounded from polymer or copolymer of chloride resin, plasticized with phosphate or phthalated plasticizers only. Rubber composition matting must feature either longitudinal or patterned corrugation on the upper surface, with longitudinal corrugations grooved at 6-1/2 to 8-1/2 grooves per inch, either rounded or triangular. The lower surface shall be finished with a knurled surface. Corrugation depth shall not exceed 50 percent of overall thickness. Standard widths include 18, 24, 36, and 48 inches with specified tolerances; thicknesses available are 1/8 inch, 3/16 inch, or 1/4 inch, all minimum dimensions. Rolls shall be furnished in 25 linear yards unless otherwise specified, with no roll containing more than one piece. Matting must be free from embedded foreign material, cracks, tears, objectionable odor, or defects affecting appearance or serviceability. When fungal resistance is specified, testing shall comply with ASTM G21. Products shall conform to producer's drawings, specifications, and standards, with quality assurance practices matching the same product offered in the commercial market. Eight National Stock Numbers are provided for standard configurations ranging from 24.0 to 48.0 inches in width. The document indicates no military interests exist, and GSA-FSS is the preparing activity.