472_22426 - CTS Full Set Drawings_Stamped_Part6.pdf

PDF 5 MB Posted Feb 13, 2024

Attached to: 472/22426. CTS; CMCF - Various Security Upgrades
Solicitation number: RFQ 171 240000000205 2
Issued by: Gogebic County, Sterling Heights City, Michigan

About this file

Written by GovTribe AI · Mar 14, 2026

This is a construction design document set consisting of 50% Construction Document (CD) review drawings prepared by the State of Michigan Department of Technology, Management and Budget, State Facilities Administration, Design and Construction Division for the Central Michigan Correctional Facility located in St. Louis, Michigan. The project, titled "Various Security Upgrades" at 320 Hubbard, involves the design and installation of comprehensive security infrastructure upgrades including access control systems, video surveillance cameras, and communication equipment across multiple buildings. The drawings specify the installation of Hydra Gateway systems at three locations (West Admin Building, East Admin Building), multiple access points with designations such as AP G1.1 through AP G3.2, and numerous security devices distributed across 53 identified locations (H1 through H53). The design incorporates equipment from manufacturers including Genetec for access control modules and software, Altronix for power supplies and controllers, Aiphone for intercom systems, and Hanwha for security cameras. The drawings are dated 08-22-23 for the 50% CD review phase, with 90% drawings projected for 11/14/2023 and final 100% drawings scheduled for 1/19/2024, indicating the document was released for bid on 1/19/24.

The technical specifications detail equipment schedules, cable requirements, and installation standards for all security components. Communication infrastructure includes CAT-6 UTP cables in pink for PACS communications, fiber optic cable stowage rings, and patch panel installations within communication room racks. Access control components encompass Genetec Signo card readers, door control modules, intercom base stations, and battery backup systems with Altronix power distribution equipment. Video security specifications include both 360-degree fisheye cameras (Hanwha XNF-9010RV, 12-megapixel) and indoor short-distance cameras (Hanwha QNV-6082R1, 2-megapixel) with provisions for recessed mounts in drop ceilings and weatherproof exterior installations. All installations require compliance with specific cable labeling protocols, conduit routing through EMT-type raceway, mounting heights at approximately 6 feet above finished floor, and integration with existing Genetec network video recorders and Ethernet switches. The design documentation references multiple drawing sheets (SE-100 through SE-107 and TC101, TC301, TC501, TC701) detailing security panel layouts, raceway specifications, and equipment connectivity codes, with all work coordinated among electrical, communications, and security contractors.

View the file

Other files

File	Type	Posted
472_22426 - CTS Full Set Drawings_Stamped_Part4.pdf	PDF	Feb 13, 2024
472.22426.CTS - Central Michigan CF Fence Modifcations & Additions_Addendum #1_20240129.pdf	PDF	Feb 13, 2024
472_22426 - CTS Full Set Drawings_Stamped_Part3.pdf	PDF	Feb 13, 2024
472_22426 - CTS Full Set Drawings_Stamped_Part5.pdf	PDF	Feb 13, 2024
472.22426.CTS - Central Michigan CF Fence Modifcations & Additions_Addendum #2.pdf	PDF	Feb 13, 2024
00-MICHSpec Rev032022 V12.pdf	PDF	Feb 13, 2024
Advertisement 22426 CM CF Security Upgrades.pdf	PDF	Feb 13, 2024
00-MICHSpec Rev032022 V12_472.22426.CTS_Central MI CF Various Security Upgrades.pdf	PDF	Feb 13, 2024
LEIN Request 22426.pdf	PDF	Feb 13, 2024
472_22426 - CTS Full Set Drawings_Stamped_Part7.pdf	PDF	Feb 13, 2024
472_22426 - CTS Full Set Drawings_Stamped_Part1.pdf	PDF	Feb 13, 2024
472_22426 - CTS Full Set Drawings_Stamped_Part2.pdf	PDF	Feb 13, 2024

Show all 12

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

M a t r ix

08-22-23 50% CD REVIEW

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

S t r a u b

P e t t i t t Y a s t e

0 N

. C ro ok s R oa d, Su ite

Cl aw so n, Mi ch iga n 4

8 -

SE-100

11/14/2023

90% Drawings

1/19/2024

100% Drawings

HS20E DOOR SENSORH#

AP G3.1

GateW2

ACCESS POINT

GATE WAY ANTENNA & HEADNED GEAR

LEGEND

HYDRA SITE

PLAN

SE-104

D E

M N P

E. AdminW. Admin

H1 H2

H5 H6

H7 H8

H10

H11 H12

H13 H14

H15

H16

H18 H17

H20H19

H21

H22

H24 H23

H26 H25

H29

H28

H27

H30

H31H32

H33

H34

H35 H36 H39 H40

H42

H41H38

H37

H43 H44

H45

H46

H48 H47

H49

H50

AP G1.2

AP G1.1

AP G1.3

GateW1 GateW2

AP G2.1

AP G2.2

AP G3.1

AP G3.2

GateW3

H51

H52

H53

WEST ADMIN BUILDING

Hydra Gateway Board/Lightning & Surge

Protection #1

Hydra Relay Board

Backup Battery

UltraLinks

Network Switch

AP Gateway 1.1

AP Gateway 1.2

AP Gateway 1.3

UPS

110AC Circuit From Nearest Emergency Circuit

LOCATE GEAR IN

ELECTRONICS RM

M a t r ix

08-22-23 50% CD REVIEW

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

S t r a u b

P e t t i t t Y a s t e

0 N

. C ro ok s R oa d, Su ite

Cl aw so n, Mi ch iga n 4

8 -

SE-100

11/14/2023

90% Drawings

HYDRA GW 1

SE-105

1/19/2024

100% Drawings

M a t r ix

08-22-23 50% CD REVIEW

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

S t r a u b

P e t t i t t Y a s t e

0 N

. C ro ok s R oa d, Su ite

Cl aw so n, Mi ch iga n 4

8 -

SE-100

11/14/2023

90% Drawings

EAST ADMIN BUILDING

Hydra Gateway Board/Lightning & Surge

Protection #2

Hydra Relay Board

Backup Battery

UltraLinks

Network Switch

UPS

110AC Circuit From Nearest Emergency Circuit

LOCATE GEAR IN

ELECTRONICS RM

AP Gateway 2.1

AP Gateway 2.2

HYDRA GW 2

SE-106

EAST ADMIN BUILDING

Hydra Gateway Board/Lightning & Surge

Protection #3

Hydra Relay Board

Backup Battery

UltraLinks

Network Switch

UPS

110AC Circuit From Nearest Emergency Circuit

LOCATE GEAR IN

ELECTRONICS RM

M a t r ix

08-22-23 50% CD REVIEW

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

F M

A D

A M

P . L

A C

H , R

A , D

A C

A D

O N

A N

D C

O N

U C

N D

S t r a u b

P e t t i t t Y a s t e

0 N

. C ro ok s R oa d, Su ite

Cl aw so n, Mi ch iga n 4

8 -

SE-100

11/14/2023

90% Drawings

AP Gateway 3.1

AP Gateway 3.2

HYDRA GW 3

SE-107

ACCESS CONTROL EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

TC501

TYPICAL ACCESS CONTROL

CABLE LABELING

TC501

TYPICAL SECURITY WALLFIELD

SECURITY SYMBOL LEGEND

SYMBOL DESCRIPTION

ABBREVIATIONS

ABBREV. DESCRIPTION ABBREV. DESCRIPTION

TR101

TYPICAL CONDUIT AND SECURE BACKBOX

INSTALLED BY COMM CONTRACTOR

TC501

CONNECTIVITY CODE

COMMUNICATION EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

CABLE SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO.

CAMERA EQUIPMENT SCHEDULE

MARK DESCRIPTION MANUFACTURER PART NO. DROP CEILING HARD

CEILING/WALL

BUILDING

EXTERIOR

BUILDING

EXTERIOR

CORNER

POLE MOUNT

TC501

CENTRAL MICHIGAN

CAMERA ONE-LINE-TRANSPORTATION

TC501

CONNECTIVITY CODE TC501

CENTRAL MICHIGAN

ACCESS CONTROL

DETAILS

C om m te ch

D es ig n

A R

T O

C H

N O

Y , M

A N

A G

T A

N D

B U

D G

O F

A N

R O

T C

. H A

, R

A , N

C A

R B

, D

A N

D B

R V

A D

O N

A N

D C

O N

U C

N D

G R

D . N

E, S

E B

R O

O R

D , M

W W

.C O

M M

H D

N .C

O M

M a t r ix

AutoCAD SHX Text

ACCESS CONTROL SYSTEM, SOFTWARE AND SERVER. PROVIDE NEW SERVER

AutoCAD SHX Text

GENETEC

AutoCAD SHX Text

GSC-SY-S

AutoCAD SHX Text

ACCESS CONTROL ENCLOSURE. BACKPLATE AND LOCKABLE PANEL

AutoCAD SHX Text

ALTRONIX

AutoCAD SHX Text

TROVE 1/2/3

AutoCAD SHX Text POWER SUPPLY FOR ACCESS CONTROL EQUIPMENT. EQUIP WITH ETHERNET CONNECTIVITY MODULE

AutoCAD SHX Text

ALTRONIX

AutoCAD SHX Text

E-FLOW SERIES W/ LINQ2 ENET MOD.

AutoCAD SHX Text POWER DISTRIBUTION BOARD AND VOLTAGE REGULATOR. POWERS OTHER BOARDS IN THE ACCESS CTRL PANEL

AutoCAD SHX Text

ALTRONIX

AutoCAD SHX Text

PDS8 SERIES WITH VR6 REGULATOR

AutoCAD SHX Text

ACCESS POWER CONTROLLER

AutoCAD SHX Text

ALTRONIX

AutoCAD SHX Text

ACMS8 OR EQUAL

AutoCAD SHX Text

DOOR ACCESS CONTROL MODULE. IP ATTACHED. QTY AS REQUIRED

AutoCAD SHX Text

GENETEC

AutoCAD SHX Text

SY-LP4502

AutoCAD SHX Text

DOOR ACCESS CONTROL MODULE. RS-485 ATTACHED. QTY AS REQUIRED

AutoCAD SHX Text

GENETEC

AutoCAD SHX Text

SY-MR52

AutoCAD SHX Text

ACCESS CONTROL SYSTEM CONTROLLER/APPLIANCE

AutoCAD SHX Text

GENETEC

AutoCAD SHX Text

SY-CLOUDLINK

AutoCAD SHX Text

CARD READER. MOUNT ON A SINGLE GANG BOX

AutoCAD SHX Text

GENETEC

AutoCAD SHX Text

SIGNO 40-PIV

AutoCAD SHX Text

BATTERY FOR ACCESS CONTROL PANEL

AutoCAD SHX Text

SEE SPECS

AutoCAD SHX Text

SEE SPECS

AutoCAD SHX Text

INTERCOM BASE STATION

AutoCAD SHX Text

AIPHONE

AutoCAD SHX Text

IX-MV7-HW-JP

AutoCAD SHX Text

IP PROGRAMMABLE RELAY

AutoCAD SHX Text

AIPHONE

AutoCAD SHX Text

IXW-MA

AutoCAD SHX Text INTERCOM -SURFACE MOUNT. EQUIP WITH CUSTOM BACKBOX AND PUSHBUTTON BELOW. CUSTOM WIRE TO SUPPORT ADA APPROVED CALL BUTTON HEIGHT

AutoCAD SHX Text

AIPHONE /ALARM CONTROLS

AutoCAD SHX Text

IX-DVF

AutoCAD SHX Text

BADGE ENROLLMENT PC AND CAMERA

AutoCAD SHX Text

SEE SPECS

AutoCAD SHX Text

SEE SPECS

AutoCAD SHX Text

AutoCAD SHX Text NOTES: 1. INSTALL A WRAP-AROUND LABEL AT EACH END OF EACH CABLE. INSTALL A WRAP-AROUND LABEL AT EACH END OF EACH CABLE. 2. WRAP-AROUND LABELS SHALL BE LASER-PRINTED AND BE WRAP-AROUND LABELS SHALL BE LASER-PRINTED AND BE SELF-LAMINATING. 3. AT THE PANEL THE CABLE SHALL BE LABELED AS IT CONNECTS TO THE AT THE PANEL THE CABLE SHALL BE LABELED AS IT CONNECTS TO THE PANEL. LABEL INDIVIDUAL SHEATHED CABLES IN A MULTI-SERVICE CABLE. 4. AT THE DOOR INSTALL THE LABEL AT THE DEVICE WHERE IT IS AT THE DOOR INSTALL THE LABEL AT THE DEVICE WHERE IT IS CONNECTED.

AutoCAD SHX Text AD02 = DOOR NUMBER AS SHOWN ON DRAWINGS A = COMM ROOM WHERE PANEL RESIDES LR = TWO LETTER DESIGNATION FOR DEVICE THAT THE CABLE CONNECTS TO.

AutoCAD SHX Text 4'x8'x3/4" PLYWOOD CUT TO FIT FIELD CONDITIONS

AutoCAD SHX Text

CABLES FOR DOOR SECURITY DEVICES

AutoCAD SHX Text

SECURITY PANEL BY SECURITY CONTRACTOR QTY AS REQ'D

AutoCAD SHX Text

WALLFIELD

AutoCAD SHX Text

ACCESS CONTROL DEVICES

AutoCAD SHX Text

ENLARGED VIEW OF TYPICAL SECURITY PANEL

AutoCAD SHX Text

AD02-A-LR

AutoCAD SHX Text

DOOR CTRL BOARD

AutoCAD SHX Text

INPUT/OUTPUT BOARD

AutoCAD SHX Text

LABELING AT THE DOOR OR REMOTE END

AutoCAD SHX Text

DOOR NUMBER AD02

AutoCAD SHX Text

AD02-A-DC

AutoCAD SHX Text

"LR" WRAP-AROUND LABEL FOR LATCH RETACTION

AutoCAD SHX Text

"DC" WRAP-AROUND LABEL FOR DOOR CONTACT

AutoCAD SHX Text

"CR" WRAP-AROUND LABEL FOR CARD READERS

AutoCAD SHX Text

"DC" WRAP-AROUND LABEL FOR DOOR CONTACT

AutoCAD SHX Text

AD02-A-DC

AutoCAD SHX Text

AD02-A-CR

AutoCAD SHX Text

NO SCALE

AutoCAD SHX Text

6" CABLE LADDER

AutoCAD SHX Text SECURITY PANEL WALLFIELD NOTES: 1. PLYWOOD SHALL BE INSTALLED ON THE WALL BEHIND THE PLYWOOD SHALL BE INSTALLED ON THE WALL BEHIND THE PANELS AND RACEWAYS. 2. PLYWOOD SHALL BE FIREPROOF. A/C GRADE. C SIDE TO PLYWOOD SHALL BE FIREPROOF. A/C GRADE. C SIDE TO THE WALL. 3. INSTALL CABLE LADDER TYPE RACEWAY OR D-RINGS TO INSTALL CABLE LADDER TYPE RACEWAY OR D-RINGS TO ROUTE THE CABLES FROM THE CEILING TO THE PANELS. 4. MOUNT THE PANELS SO THAT THE TOP OF THE PANELS IS MOUNT THE PANELS SO THAT THE TOP OF THE PANELS IS ABOUT 6' AFF. 5. CONNECT SECURITY PANELS TO A GROUND BAR. PROVIDE CONNECT SECURITY PANELS TO A GROUND BAR. PROVIDE GROUND BAR ON THE WALLFIELD. 6. SEE TC503 AND TC502 FOR SPECIFIC PANEL, RACEWAY SEE TC503 AND TC502 FOR SPECIFIC PANEL, RACEWAY AND CABLING REQUIREMENTS

AutoCAD SHX Text PROVIDE 15' COIL OF CABLE ON METAL RING. LEVITON #4890-OFR or 48900-IFR

AutoCAD SHX Text KEYED NOTES: PROVIDE 15' OF CABLE PRIOR TO TERMINATION IN THE SECURITY PANEL. PROVIDE ON A FIBER OPTIC METAL RING. INSTALL ABOVE THE PANELS. PROVIDE ONE FOR EACH PANEL. GROUP PANEL CABLES ONTO PANEL SPECIFIC RING. EXTEND 120V POWER TO THE POWER SUPPLIES IN THE PANELS. PROVIDE PLUGS FOR POWER CONNECTIONS. SHALL BE A UPS AND GENERATOR BACKCED POWER CIRCUIT. PROVIDE SUPPORT FOR THE CABLES WITH CABLE LADDER OR OTHER RACEWAY.

AutoCAD SHX Text

AutoCAD SHX Text THIS SYMBOL WITH A NUMBER INSIDE REFERS TO KEYNOTES. REFER TO NOTES ON THE SHEET OR WITHIN THE DETAIL FOR ADDITIONAL INFORMATION

AutoCAD SHX Text EQUIPMENT SCHEDULE. THIS SYMBOL WITH LETTERS INSIDE REFERS EQUIPMENT SCHEDULES, SEE DETAILS AND EQUIPMENT SCHEDULES ON TC101, TC301, TC501 AND TC701.

AutoCAD SHX Text CABLE SCHEDULE. THIS SYMBOL WITH NUMBERS INSIDE REFERS EQUIPMENT SCHEDULES, SEE DETAILS AND EQUIPMENT SCHEDULES ON TC101, TC301, TC501 AND TC701.

AutoCAD SHX Text ACCESS CONTROL SYMBOL. "XX" IS LETTERS. SEE DETAILS ON TC5XX SHEETS FOR EQUIPMENT, CABLING AND RACEWAY DETAILS.

AutoCAD SHX Text ACCESS CONTROL SYMBOL FOR EXISTING DEVICES. "XX" IS LETTERS. SEE DETAILS ON TC5XX SHEETS. LEAVE DEVICES AND CONNECT TO NEW SYSTEM OR LEAVE AS CONNECTED TO EXISTING SYSTEM. SEE NOTES AND DETAILS

AutoCAD SHX Text

DOOR NUMBER

AutoCAD SHX Text SECURITY PANEL. PROVIDE PANEL AND CONNECT AS SHOWN ON FLOORPLANS AND IN THE SPECIFICATIONS.

AutoCAD SHX Text COMPUTER. PROVIDE AND INSTALL A PC FOR THE SECURITY SYSTEM. SEE DETAILS ON TC5XX SHEETS AND SPECIFICATIONS FOR REQUIREMENTS

AutoCAD SHX Text SURFACE RACEWAY SYMBOL. CONTRACTOR TO INSTALL RACEWAY AND BACKBOX. SEE DETAILS FOR TYPE OF SURFACE RACEWAY AND SIZE OF BACKBOX.

AutoCAD SHX Text A

AutoCAD SHX Text

XXX

AutoCAD SHX Text

SEC.PNL

AutoCAD SHX Text 2G

AutoCAD SHX Text

TWO-GANG BOX - PROVIDED BY EC

AutoCAD SHX Text

NIC

AutoCAD SHX Text

NOT IN CONTRACT

AutoCAD SHX Text

AutoCAD SHX Text ABOVE COUNTER - INSTALL BACKBOX SAME HEIGHT AS OTHER ELECTRICAL OUTLETS ABOVE THE COUNTER.

AutoCAD SHX Text

PBO

AutoCAD SHX Text

PROVIDED BY OTHERS

AutoCAD SHX Text

AFF

AutoCAD SHX Text

ABOVE FINISHED FLOOR

AutoCAD SHX Text

PCO-1

AutoCAD SHX Text

PATCH CORD ORGANIZER - 1 UNIT HIGH

AutoCAD SHX Text

AFG

AutoCAD SHX Text

ABOVE FINISHED GROUND

AutoCAD SHX Text

PCO-2

AutoCAD SHX Text

PATCH CORD ORGANIZER - 2 UNITS HIGH

AutoCAD SHX Text

AWG

AutoCAD SHX Text

AMERICAN WIRE GAUGE

AutoCAD SHX Text

PET

AutoCAD SHX Text

PROTECTED ENTRANCE TERMINAL

AutoCAD SHX Text

EMT

AutoCAD SHX Text

EMT TYPE CONDUIT

AutoCAD SHX Text

QTY

AutoCAD SHX Text

QUANTITY

AutoCAD SHX Text

ELECTRICAL CONTRACTOR

AutoCAD SHX Text

PROVIDE 120 VOLT OUTPUT FROM UPS PANEL IN COMM ROOM. ADMIN BUILDING ONLY.

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SINGLE-GANG BOX-ALUMINUM, ONE (3/4) OPENING, SINGLE-GANG BOX-ALUMINUM, ONE (3/4) OPENING, RED-DOT IHD3-2 IHD3-2 2 SQUARE LUG TYPE PLUGS FOR SPARE HOLES. FLAT BLADE SQUARE LUG TYPE PLUGS FOR SPARE HOLES. FLAT BLADE PLUGS ARE NOT ALLOWED 1 3/4" EMT TYPE CONDUIT CONTRACTOR 3/4" EMT TYPE CONDUIT CONTRACTOR CONTRACTOR 1 NYLON BUSHING NYLON BUSHING LOT TWO-HOLE CONDUIT STRAPS TWO-HOLE CONDUIT STRAPS LOT SECURITY SCREWS OR EXPANDABLE ANCHORS SECURITY SCREWS OR EXPANDABLE ANCHORS

AutoCAD SHX Text INDICATES THAT THE CABLES AT THIS LOCATION SHALL BE INSTALLED THROUGH NEW RACEWAY & BACKBOX THAT IS INSTALLED BY THE CONTRACTOR

AutoCAD SHX Text

18" A.F.F. OR AS NOTED ON FLOOR PLANS

AutoCAD SHX Text

COMMUNICATION CABLES

AutoCAD SHX Text

3/4" CONDUIT EMT TYPE

AutoCAD SHX Text

FACEPLATE

AutoCAD SHX Text

NYLON BUSHING

AutoCAD SHX Text

SQUARE LUG TYPE PLUG

AutoCAD SHX Text

1-GANG BACKBOX HUBBELL-BELL #5387-0

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 FACEPLATE HUBBELL IMF1OW FACEPLATE HUBBELL IMF1OW HUBBELL IMF1OW IMF1OW 2 CAT-6 CABLES-PINK MOHAWK M58282 CAT-6 CABLES-PINK MOHAWK M58282 MOHAWK M58282 M58282 2 CAT-6 JACK-PINK HUBBELL HXJ6PK CAT-6 JACK-PINK HUBBELL HXJ6PK HUBBELL HXJ6PK HXJ6PK 1 TWO-HOLE KEYSTONE HUBBELL IM2K1OW TWO-HOLE KEYSTONE HUBBELL IM2K1OW HUBBELL IM2K1OW IM2K1OW 2 1 UNIT BLANK HUBBELL IMB1OW1 UNIT BLANK HUBBELL IMB1OWHUBBELL IMB1OWIMB1OW

AutoCAD SHX Text

COMMUNICATION CABLES

AutoCAD SHX Text

WALL

AutoCAD SHX Text

FACEPLATE

AutoCAD SHX Text ±18"

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

DATA

AutoCAD SHX Text

DATA

AutoCAD SHX Text

BLANK

AutoCAD SHX Text

BLANK

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

SEE TRXXX DRAWINGS

AutoCAD SHX Text

AutoCAD SHX Text X

AutoCAD SHX Text

SINGLE RACK UNIT PATCH CORD ORGANIZER (PCO-1) WITH HINGED COVER.

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

HS13C

AutoCAD SHX Text PATCH PANEL-24 PORT, EQUIPPED WITH 8-PIN MODULAR JACKS TO MATCH THE CABLE COLOR AND CABLE TYPE BEING TERMINATED. PROVIDE ONE MODULAR JACK FOR EACH CABLE BEING TERMINATED. SEE SPEC AND DRAWINGS FOR COLORS. EQUIP WITH REAR CABLE ORGANIZER

AutoCAD SHX Text

HUBBELL

AutoCAD SHX Text

PANEL:HPJ24 ORGANIZER:ECMBR3

AutoCAD SHX Text FIBER OPTIC CABLE STOWAGE RING. WALL MOUNTED. 12" OR 24". PROVIDE AND INSTALL TO SUPPORT BEND RADIUS REQUIREMENTS OF THE FIBER CABLE`

AutoCAD SHX Text

LEVITON

AutoCAD SHX Text

12" #48900-IFR / 24" #48900-OFR

AutoCAD SHX Text A

AutoCAD SHX Text B

AutoCAD SHX Text C

AutoCAD SHX Text

CAT-6 UTP CABLES FOR PACS COMMUNICATIONS SHALL BE PINK IN COLOR

AutoCAD SHX Text

MOHAWK

AutoCAD SHX Text M58282

AutoCAD SHX Text

ACCESS CONTROL CABLE. COMBO CABLE FOR CR, DC, ES/EL ETC-PLENUM- PINK IN COLOR

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text INDIVIDUAL SECURITY DEVICE CABLE. PROVIDE AS PER MANUFACTURERS REQUIREMENTS. -PLENUM RATED. PINK IN COLOR

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text

CONTRACTOR

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text

CAT-6 CABLES FOR CAMERA & POE POWER

AutoCAD SHX Text

HARD CEILING SURFACE MOUNT STF-1913

AutoCAD SHX Text

INTERIOR PENDANT MOUNT STF-1914

AutoCAD SHX Text

EMT COND.

AutoCAD SHX Text

INDOOR AND OUTDOOR 360 FISHEYE SINGLE IMAGER 12 MEGAPIXEL

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

XNF-9010RV

AutoCAD SHX Text

SHD-1600FPW

AutoCAD SHX Text

SBP-167HMW, SBP-300WMW1 SBP-300NBW

AutoCAD SHX Text

SBP-300KMW1 SBP-300NBW

AutoCAD SHX Text

SBP-300PMW1 & SBP-300NBW

AutoCAD SHX Text

INDOOR SHORT DISTANCE CAMERA. 2MP. DROP OR HARD CEILING

AutoCAD SHX Text

HANWHA

AutoCAD SHX Text

QNV-6082R1

AutoCAD SHX Text

SHD-1408FPW

AutoCAD SHX Text

AutoCAD SHX Text KEYED VIDEO SECURITY NOTES: NEW CAMERA TO BE INSTALLED WITH NEW CABLE. CONTRACTOR TO AIM AND FOCUS CAMERA, AND MAKE SURE CAMERA & CABLE ARE FUNCTIONING PROPERLY.

AutoCAD SHX Text

AutoCAD SHX Text GENERAL VIDEO SECURITY NOTES: 1. CONTRACTOR SHALL PROVIDE ALL PATCH CABLES AT THE CAMERA AND CONTRACTOR SHALL PROVIDE ALL PATCH CABLES AT THE CAMERA AND AT THE COMM ROOM. MATCH COLOR OF CAMERA CABLE. 12" LONG AT SWITCH. 10' AT THE CAMERA. INSTALL NEW, THIN PATCH CABLES AS PER THE SPECIFICATIONS FOR ALL NEW AND REPLACED CAMERAS. 2. CONTRACTOR SHALL PROVIDE THE CORRECT CAMERA MOUNT BASED ON CONTRACTOR SHALL PROVIDE THE CORRECT CAMERA MOUNT BASED ON CAMERA LOCATION AND STRUCTURE AVAILABLE. PROVIDE RECESSED CAMERA MOUNTS IN DROP CEILINGS. REVIEW PLANS AND SITE PRIOR TO ORDERING. EACH EXTERIOR AND POLE MOUNTED CAMERA SHALL INCLUDE A HINGED BACKBOX FOR MOUNTING. 3. CAMERAS IN DROP CEILINGS SHALL BE RECESSED MOUNT. PROVIDE CAMERAS IN DROP CEILINGS SHALL BE RECESSED MOUNT. PROVIDE BACKPLATE OR T-BAR FOR SUPPORT FROM GRID, NOT JUST THE TILE. 4. CONTRACTOR SHALL PROVIDE AND INSTALL A CAMERA LICENSE FOR THE CONTRACTOR SHALL PROVIDE AND INSTALL A CAMERA LICENSE FOR THE CAMERAS BEING INSTALLED. APPLY TO EXISTING GENETEC SERVER. SETUP THE CAMERAS ON THE SYSTEM AND POPULATE THE EXISGTING VIEWING STATIONS WITH THE NEW CAMERAS. 5. WHERE THE CAMERA IS NOT INSTALLED INTO A DROP CEILING THE WHERE THE CAMERA IS NOT INSTALLED INTO A DROP CEILING THE CONTRACTOR SHALL PROVIDE A MOUNT AND HOUSING. PROVIDE WEATHERPROOF MOUNTS ON EXTERIOR CAMERAS. 6. ALL CAMERAS SHALL CONNECT TO THE IP NETWORK SWITCH IN THE ALL CAMERAS SHALL CONNECT TO THE IP NETWORK SWITCH IN THE COMMUNICATIONS ROOM OR CABINET. CONTRACTOR SHALL WORK WITH THE OWNER ON CONFIGURATION OF THE ETHERNET SWITCH. 7. NETWORK VIDEO RECORDER(S) (NVR) ARE EXISTING.NETWORK VIDEO RECORDER(S) (NVR) ARE EXISTING.

AutoCAD SHX Text

CAT-6 PATCH PANEL IN COMM ROOM RACK

AutoCAD SHX Text

EXISTING ETHERNET SWITCH

AutoCAD SHX Text INSTALLATION NOTES: 1. PROVIDE A SURFACE MOUNT BOX TO THE BUILDING STRUCTURE PROVIDE A SURFACE MOUNT BOX TO THE BUILDING STRUCTURE NEAR THE SECURITY CAMERA LOCATION. 2. SEE FLOORPLAN FOR LOCATION. SEE FLOORPLAN FOR LOCATION. 3. SEE ARCHITECTURAL REFLECTED CEILING PLAN FOR TYPESEE ARCHITECTURAL REFLECTED CEILING PLAN FOR TYPE

AutoCAD SHX Text PARTS CONNECTIVITY CODE CONNECTIVITY CODE QTY DESCRIPTION MANUFACTURER PART # DESCRIPTION MANUFACTURER PART # MANUFACTURER PART # PART # 1 SURFACE BOX HUBBELL HSB1OW SURFACE BOX HUBBELL HSB1OW HUBBELL HSB1OW HSB1OW 1 CAT-6 CABLES-GREEN MOHAWK M58286 CAT-6 CABLES-GREEN MOHAWK M58286 MOHAWK M58286 M58286 1 CAT-6 JACK HUBBELL HXJ6GNCAT-6 JACK HUBBELL HXJ6GNHUBBELL HXJ6GNHXJ6GN

AutoCAD SHX Text

PENDANT CAMERA

AutoCAD SHX Text

CAMERA

AutoCAD SHX Text

CAT-6 PATCH BY OTHERS

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

CAT-6 CABLE

AutoCAD SHX Text

OPEN CEILING INSTALLATION

AutoCAD SHX Text

SECURITY CAMERA

AutoCAD SHX Text

ABOVE DROP CEILING INSTALLATION

AutoCAD SHX Text

15' COIL OF CABLE

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

SURFACE MOUNTED CAMERA

AutoCAD SHX Text

CAT-6 SURFACE BOX

AutoCAD SHX Text

LABEL

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

SHEET NUMBER

AutoCAD SHX Text

472/22426.CTS

AutoCAD SHX Text file no.

AutoCAD SHX Text checked by

AutoCAD SHX Text drawn by

AutoCAD SHX Text consultant

AutoCAD SHX Text issue date

AutoCAD SHX Text index no.

AutoCAD SHX Text contract order no.

AutoCAD SHX Text consultant job no.

AutoCAD SHX Text 1065-121

AutoCAD SHX Text sheet title

AutoCAD SHX Text

320 HUBBARD

AutoCAD SHX Text

VARIOUS SECURITY UPGRADES

AutoCAD SHX Text P

AutoCAD SHX Text L

AutoCAD SHX Text U

AutoCAD SHX Text R

AutoCAD SHX Text I

AutoCAD SHX Text B

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text N

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text C

AutoCAD SHX Text I

AutoCAD SHX Text R

AutoCAD SHX Text C

AutoCAD SHX Text U

AutoCAD SHX Text M

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text I

AutoCAD SHX Text C

AutoCAD SHX Text E

AutoCAD SHX Text S

AutoCAD SHX Text I

AutoCAD SHX Text Q

AutoCAD SHX Text U

AutoCAD SHX Text E

AutoCAD SHX Text R

AutoCAD SHX Text E

AutoCAD SHX Text I

AutoCAD SHX Text S

AutoCAD SHX Text P

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text I

AutoCAD SHX Text N

AutoCAD SHX Text S

AutoCAD SHX Text U

AutoCAD SHX Text L

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text O

AutoCAD SHX Text E

AutoCAD SHX Text N

AutoCAD SHX Text A

AutoCAD SHX Text M

AutoCAD SHX Text

CENTRAL MI CORRECTIONAL FACILITY

AutoCAD SHX Text

ST LOUIS, MICHIGAN

AutoCAD SHX Text

CONSULTING ENGINEERS, INC

AutoCAD SHX Text

FAX: 517.487.2544

AutoCAD SHX Text

PHONE: 517.487.2511

AutoCAD SHX Text

LANSING, MI 48906

AutoCAD SHX Text

1601 E CESAR E. CHAVEZ AVE.

AutoCAD SHX Text

MATRIX PROJECT:

AutoCAD SHX Text WEB: www.matrixceinc.com

AutoCAD SHX Text 1/19/24

AutoCAD SHX Text

RELEASED FOR BID

File details come from the government source that posted it. Updated Mar 12, 2026.