4. Project Plans.pdf

FREDERICK

PERRIN

Digitally signed by FREDERICK

PERRIN

Date: 2021.05.03 11:50:41 -07'00'

PETER CATES Digitally signed by PETER CATES Date: 2021.05.03 14:44:46 -07'00'

CYNTHIA

LUZIETTI

Digitally signed by CYNTHIA

LUZIETTI

Date: 2021.05.04 11:15:42 -07'00'

Digitally signed by Kari Otto Date: 2021.05.04 16:23:43 -07'00'

5/3/21

5/3/21

5/4/21

5/4/21

MULLIOl-.l �'u1WliG'N

, �\Xt;.l) ANO:i-\lNCi'&t> Sf\S\4

C.OV..N&� .MULt.1 01'.I t.>&TAIL

1" X 4"

Basic Butt Joint with

May Use Dado or Cut Exist to Smooth Finish

Notes:

1. Caulk joints

2. All corner trim to be replaced. If necessary, cut lengthwise to fit.

1" X 6"

3. Only replace damaged, missing, or unmatching trim between sashes.

0 Mullion Details 71------

No Scale

Notes:

1. Install 1" x 4" trim as shown tfo\1---__ L_o_u_v_r _e _T_ r_im __ _ Q No Scale

U.S. DEPARTMENT OF AGRICULTURE

GAOA Hirz Mountain FOREST SERVICE

SHASTA-TRINITY NATIONAL FOREST Lookout Restoration

REDDING, CALIFORNIA

. co�1-ii;.R.' bl. AO

' ·'(H,T,AI L.

��OVli 11.t,ll f

P,iLOW �ASH, 1" X 8" V-Rustic Shiplap

Basic Butt Joint

Notes:

1 .5''x1 .5''

1. Caulk joints

2. Min 1" miter nails for trim into siding

Exterior Corner Moulding

1)ooll.

Notes:

1. Install New Oak Threshold

Over Plywood & Flooring

Plywood & Flooring

® Corner Be ad Detail 8 ---- No Scale 9 1-------

® T hr eshold Detail No Scale

Trim Details &

Sash Repairs

Notes:

1. Confirm dimensions on site.

2. These photos are examples of the exist conditions of the hinged sashes.

3. Tighten and/or replace loose fasteners.

4. Repair and/or replace the weather stripping.

5. Replace missing struts to match existing.

6. Repair hinges.

7. S elevation hinged sash has been blocked shut. Make operable and add screen.

8. Prime and paint to match existing.

1---

--S_a _s_h _R_ e--=p_ a_i _r __ U No Scale

DESIGNED: F. Perrin

DRAWN: E. �CC{Q

CHECKED: IS. t::k2lD.a

DATE:

DATE:

DATE:

Apr 2021

Aer 2021

Aw 2021 r� 1

RillSJON

I ITT J�

DRAWING ID

HL-5

Sheet 6 of

7 )

Exist.

Tower S t air Eleva tion No Scale

Tread is approx 2" x 12" x 3'. Cut to fit.

2. Drill bolt holes. Use exist bolts. Replace if corroded.

3. Drill holes through angled metal & attach 2"x4" boards to top railing and balusters with 1.5" lag bolts.

Top board attached under railing. Cut to fit.

4. Attach fence between angled metal and top board & attach between balusters and bottom board.

Second Flight

U.S. DEPARTMENT OF AGRICULTURE

FOREST SERVICE

SHASTA-TRINITY NATIONAL FOREST

REDDING, CALIFORNIA

No Scale

GAOA Hirz Mountain Lookout Restoration

First Flight No Scale

Tread is approx 2" x 12" x 3'. Cut to fit.

2. Drill bolt holes. Use exist bolts. Replace if corroded.

3. Drill holes through angled metal & attach 2"x4" boards to top railing and balusters with 1.5" lag bolts.

Top board attached under railing. Cut to fit.

4. Attach fence between angled metal and top board & attach between balusters and bottom board.

Replace exist wire fence and boards around deck railing.

2. Attach fence between angled metal top rail and top board & attach between balusters and bottom board.

f16\i--_D_e _c_k_F_e_n_c_e __ V No Scale

Tread & Landing

Replacement

DESIGNED: _,F:..:.. • ..:..P,:cer'-"rin!.__ ___ _

DRAWN: ....1f::......r.P,,,ecmcioL--___ _

CHECKED: __.K.........,N""o{.i.u.DD'------

DATE:

DATE:

DATE:

Notes:

1. Landing treads are a mixture f 2"x 6", 8", 10", 12" Cut to fit.

2. Drill bol holes. Use existing oils. Replace if corrod d.

3. Drill hol s through angled etal & attach 2"x4" boards to top railing a d balusters with 1.5 lag bolts. Top board a ached under railing. ut to fit.

Attach f nee between angled etal and top board & attach betwee balusters and bottom oard.

1 5

(1,v,___L_a_nd_i_ n g� V No Scale

1.5" Lag Bolts

2" X 4" boards

Exist.

Angled Metal Railings

YAngled Metal Baluster

I Notes:

1. Confirm dimensions

I on site.

I 2. Attach wire fence as shown herein. Tuck

I top of fence between

I angled metal and 2"x4" board.

I 3. This is a typical I section. Variations will occur.

I 4. Attach fence to

L _J boards with 3/4" galv. staples.

1 7 Typ Fence Section No Scale

Apr 2021

Aer 2021

Aw 2021 r�I

REVISION