Lead Based Paint Report_4-28-2021.pdf

Guzi-West Inspection & Consulting 888-351-8189 | reporting@guziwest.com | www.guziwest.com

April 28, 2021

Fred Perrin frederick.perrin@usda.gov

Project Name: Hertz Mountain Lookout/Forest Service Project Address: Hertz Mountain Lookout Project Scope: Lead Paint Inspection

Dear Mr. Perrin, Guzi-West certified lead-based paint sampling personnel received representative Hertz Mountain Lookout paint chip samples, from Fred Perrin, on April 26, 2021. Following sample receival from Mr. Perrin, the samples were submitted by a Guzi-West certified lead-based paint sampling technician, under chain-of-custody documentation, to a California-certified laboratory for analysis.

As evidenced by the laboratory report provided in Attachment A, two paint chip samples analyzed contain a concentration of lead which is regulated by the State of California; the California Code of Regulations defines a lead-containing surface coating as a painted surface containing greater than 600 parts per million lead. Additionally, one paint chip sample collected and analyzed contains a concentration of lead defined as a lead-based paint; the EPA defines lead-based paint as a painted surface containing equal to or greater than 5,000 parts per million lead. The bulleted list below identifies the painted surfaces classified as either lead-based paint or lead-containing surface coating;

• Outrigger, White – lead based paint (6,472 ppm)

• Window Corner Trim (1” x 6”) - lead-containing surface coating (3,615 ppm)

• Tongue and Groove Siding, White - lead-containing surface coating (611.5 ppm)

Guzi-West recommends all painted surfaces be treated as lead-based paint due to one paint chip sample containing a concentration of lead defined as lead-based paint. Prospective contractors should have training in accordance with the requirements of Title 8, California Code of Regulations, Section 1532.1 and ensure proper worker protection is utilized during any disturbance of paint containing lead.

Thank you for the opportunity to work on the project, and feel free to call/e-mail if you have any questions.

mailto:reporting@guziwest.com http://www.guziwest.com/

Mr. Fred Perrin April 28, 2021

Sincerely, Clay Guzi and Steve West

CAC 05-3900

Lead IAS 11153

ATTACHMENT A

SanAir ID#: 21020137

Project #: Hirz Mountain Lookou

Project Name: Forest Service

Report Date: 4/28/2021

Analysis Report prepared for Guzi-West Inspection & Consulting, LLC

Dear Clay Guzi, We at SanAir would like to thank you for the work you recently submitted. The 5 sample(s) were received on Wednesday, April 28, 2021 via FedEx. The final report(s) is enclosed for the following sample(s): 1, 2, 3, 4. The following sample(s) were unusable and were not tested: 5

These results only pertain to this job and should not be used in the interpretation of any other job. This report is only complete in its entirety. Refer to the listing below of the pages included in a complete final report.

Sincerely, Abisola Kasali Metals Laboratory Director SanAir Technologies Laboratory

Final Report Includes:

- Cover Letter

- Analysis on Test Family AA

- Disclaimers and Additional Information

Sample conditions:

- 4 samples in Good condition.

- 1 samples in QNS condition. (#5)

1551 Oakbridge Dr. Suite B, Powhatan, VA 23139 | 804.897.1177 | Fax: 804.897.0070 | www.SanAir.com | IAQ@SanAir.com

Hirz Mountain LookouProject Number:

P.O. Number:

Project Name: Forest Service

4/26/2021Collected Date:

4/28/2021 12:00:00 PMReceived Date:

4/28/2021 4:50:50 PM

21020137 SanAir ID Number

FINAL REPORT

Guzi-West Inspection & Consulting, LLCName:

Address: PO Box 492770

Redding, CA 96049

530-515-0922Phone:

Analyst: Baird, Marti

Test Method: SW846/M3050B/7000B

Lead Paint Analysis PAINT µg Pb Sample Size Calculated Sample Sample

Sample Description In Sample (grams) RL Results Results

21020137 - 1 1 815 0.1259 79.4 6472 0.647 % Outrigger(White) µg/g (ppm) By Weight

21020137 - 2 2 28 0.1184 84.5 237.8 0.024 % Window Sill/Rail(Green) µg/g (ppm) By Weight

21020137 - 3 3 398 0.1101 90.8 3615 0.362 % Window/Corner Trim 1"x6"(White) µg/g (ppm) By Weight

21020137 - 4 4 69 0.1126 88.8 611.5 0.061 % Tongue & Groove Siding(White) µg/g (ppm) By Weight

Method Reporting Limit <10 µg/0.1 g paint

Signature:

Date: 4/28/2021 Date: 4/28/2021

Reviewed:

Hirz Mountain LookouProject Number:

P.O. Number:

Project Name: Forest Service

4/26/2021Collected Date:

4/28/2021 12:00:00 PMReceived Date:

4/28/2021 4:50:50 PM

21020137 SanAir ID Number

FINAL REPORT

Guzi-West Inspection & Consulting, LLCName:

Address: PO Box 492770

Redding, CA 96049

530-515-0922Phone:

Revision Date 10/20/2020

Disclaimer

SanAir Technologies Laboratory, Inc. participates in the Environmental Lead Accreditation Program (ELAP) administered by AIHA-LAP, LLC (Lab ID162952). Refer to our accreditation certificate or www.aihaaccreditedlabs.org for an up to date list of the Fields of Testing for which we are accredited. SanAir also participates in the State of New York’s DOH-ELAP (Lab Id 11983), and has met the EPA's NLLAP program standards. This report does not constitute endorsement by AIHA-LAP, LLC and/or any other U.S. governmental agencies; and may not be accredited by every local, state or federal regulatory agency.

This report is the sole property of the client named on the SanAir Technologies Laboratory chain-of-custody (COC).

Neither results nor reports will be discussed with or released to any third party without our client’s written permission. Final reports cannot be reproduced, except in full, without written authorization from SanAir

Technologies Laboratory, Inc. The information provided in this report applies only to the samples submitted and is relevant only for the date, time, and location of sampling. SanAir is not responsible for sample collection or interpretation made by others. SanAir assumes no responsibility for information provided by the client on the COC such as project number, project name, collection dates, po number, special instructions, samples collected by, sample numbers, sample identifications, sample type, selected analysis type, flow rate, total volume or area, and start stop times that may affect the validity of the results in this report. SanAir Technologies Laboratory, Inc only assures the precision and accuracy of the data it generates and assumes no responsibility for errors or biasing that occur during collection prior to SanAir’s receipt of the sample(s). SanAir’s Method Detection Limits (MDL) and Reporting Limits

(RL) have been derived using various materials meeting each accrediting agencies’ standards. All quality control results are acceptable unless otherwise noted. Results are not corrected for blanks. For Lead Exposure Limits in

Paint, refer to HUD Guidelines for the Evaluation and Control of Lead-Based Paint Hazards and State and Federal

Regulations, where applicable.

http://www.aihaaccreditedlabs.org/